ORA-06571: Function TEST_FUNC does not guarantee not to update database

I have created a very simple C function in a .dll. Everything compiles OK, and I can create the lib, package, and procedure. But when I try to use it from sql*plus:
SQL> select test_func(1) from dual;
select test_func(1) from dual
ERROR at line 1:
ORA-06571: Function TEST_FUNC does not guarantee not to update database
Note, all the function should do is return arg+1.
Any help would be appreciated. Thanks.
null

Any Function called from SQL need to be defined Purety Level by using pragma restrict References
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tim McCracken ([email protected]):
I have created a very simple C function in a .dll. Everything compiles OK, and I can create the lib, package, and procedure. But when I try to use it from sql*plus:
SQL> select test_func(1) from dual;
select test_func(1) from dual
ERROR at line 1:
ORA-06571: Function TEST_FUNC does not guarantee not to update database
Note, all the function should do is return arg+1.
Any help would be appreciated. Thanks.<HR></BLOCKQUOTE>
null

Similar Messages

ORA-06571: Function SAM_OUTPUT does not guarantee not to update database

Hi,
i created a package as follows,
CREATE OR REPLACE PACKAGE cursor_test_pak
AS
TYPE trans_cursor IS REF CURSOR;
FUNCTION Cursor_Test
RETURN trans_cursor;
          FUNCTION sam_output RETURN NUMBER;
END;
CREATE OR REPLACE PACKAGE BODY cursor_test_pak
AS
FUNCTION Cursor_Test RETURN trans_cursor
AS
lv_cursor trans_cursor;
BEGIN
OPEN lv_cursor FOR
SELECT * FROM JAMES_SAM6;
RETURN lv_cursor;
END ;
FUNCTION sam_output RETURN NUMBER
AS
lv_cur trans_cursor;
BEGIN
lv_cur := Cursor_Test();
RETURN lv_cur%ROWCOUNT;
--RETURN 1;
END;
END;
after that i tried the following statement,
select cursor_test_pak.sam_output() from dual;
i got the following error,
ORA-06571: Function SAM_OUTPUT does not guarantee not to update database
i don't know what does it mean?
can any one help me in this?
Thanks,
james.

i think use of cursor attribute not possible with cursor variable
like this : lv_cur%ROWCOUNT; If you are not sure why don't you check ?
SQL> declare
2   rc sys_refcursor;
3   a integer;
4 begin
5   open rc for 'select 1 from emp';
6   loop
7    fetch rc into a;
8    exit when rc%notfound;
9    dbms_output.put_line('CURSOR VARIABLE %ROWCOUNT = ' || rc%rowcount);
10   end loop;
11   close rc;
12 end;
13 /
CURSOR VARIABLE %ROWCOUNT = 1
CURSOR VARIABLE %ROWCOUNT = 2
CURSOR VARIABLE %ROWCOUNT = 3
CURSOR VARIABLE %ROWCOUNT = 4
CURSOR VARIABLE %ROWCOUNT = 5
CURSOR VARIABLE %ROWCOUNT = 6
CURSOR VARIABLE %ROWCOUNT = 7
CURSOR VARIABLE %ROWCOUNT = 8
CURSOR VARIABLE %ROWCOUNT = 9
CURSOR VARIABLE %ROWCOUNT = 10
CURSOR VARIABLE %ROWCOUNT = 11
CURSOR VARIABLE %ROWCOUNT = 12
CURSOR VARIABLE %ROWCOUNT = 13
CURSOR VARIABLE %ROWCOUNT = 14
PL/SQL procedure successfully completed.Rgds.

Function in SQL: PRAGMA used, but '..does not guarantee not to update database'- WHY?

I use function in SQL statement. It is a dynamicaly build SQL, therefore I need overload functions. These funcs defined in package. The package has PRAGMA Restrict_References (.., WNDS). So all functions should be restricted to update database.
But Oracle returns an error:
Function NVL_ does not guarantee not to update database
This is my build SQL:
----- the execution string is: ---------------
Begin
INSERT INTO TEST_TBL_BS (MILL_ORDER, CLM1, CLM2, CLM3, NOTES, INIT_DATE )
VALUES (NV.NVL_(Arc_Utl.TEST_TBL_dltd.MILL_ORDER),
NV.NVL_(Arc_Utl.TEST_TBL_dltd.CLM1),
NV.NVL_(Arc_Utl.TEST_TBL_dltd.CLM2),
NV.NVL_(Arc_Utl.TEST_TBL_dltd.CLM3),
NV.NVL_(Arc_Utl.TEST_TBL_dltd.NOTES),
Arch.Init_Time );
End;
This is NV package:
PACKAGE NV IS
PRAGMA Restrict_References ( NV, WNDS );
NULL_date DATE := TO_DATE ('01/01/1001', 'mm/dd/yyyy');
NULL_numb NUMBER := 0;
NULL_str VARCHAR2 (10)
:= '?';
-- overloaded NULL_Val function returns NULL_<type> value (defined early)
-- depend on received variable type
FUNCTION NULL_Val ( val_in IN DATE )
RETURN DATE ;
FUNCTION NULL_Val ( val_in IN NUMBER )
RETURN NUMBER ;
FUNCTION NULL_Val ( val_in IN VARCHAR2 )
RETURN VARCHAR2 ;
-- PRAGMA Restrict_References ( NULL_Val, WNDS ); -- can be used in SQLs
-- these pretends to cover hole of the SYS.NVL that do not have posibility
-- to return default NULL value for every given type
FUNCTION NVL_ ( val_in IN DATE )
RETURN DATE ;
FUNCTION NVL_ ( val_in IN NUMBER )
RETURN NUMBER ;
FUNCTION NVL_ ( val_in IN VARCHAR2 )
RETURN VARCHAR2 ;
-- PRAGMA Restrict_References ( NVL_, WNDS ); -- can be used in SQLs
END NV;
CREATE OR REPLACE PACKAGE BODY NV AS
-- NULL_Val set of overloaded functions - returns appropriate NULL value
FUNCTION NULL_Val ( val_in IN DATE )
RETURN DATE IS
BEGIN RETURN NULL_date;
END NULL_Val; -- for date
FUNCTION NULL_Val ( val_in IN NUMBER )
RETURN NUMBER IS
BEGIN RETURN NULL_numb;
END NULL_Val; -- for NUMBER
FUNCTION NULL_Val ( val_in IN VARCHAR2 )
RETURN VARCHAR2 IS
BEGIN RETURN NULL_str;
END NULL_Val; -- for VARCHAR2
-- set NVL_ function to return default NULL value if received variable
-- is NULL or the received variable if it is not NULL
FUNCTION NVL_ ( val_in IN DATE )
RETURN DATE IS
BEGIN RETURN NVL( val_in, NULL_Val ( val_in )); END NVL_;
FUNCTION NVL_ ( val_in IN NUMBER )
RETURN NUMBER IS
BEGIN RETURN NVL( val_in, NULL_Val ( val_in )); END NVL_;
FUNCTION NVL_ ( val_in IN VARCHAR2 )
RETURN VARCHAR2 IS
BEGIN RETURN NVL( val_in, NULL_Val ( val_in )); END NVL_;
END NV;
Can anybody help : where is a problem and what I can do in my case?
I work in Oracle 7.3
Thank you,
Alex

Hi Alex,
I've found that on the RDBS docs:
If you specify DEFAULT instead of a function name, the pragma applies to all functions in the package spec or object type spec (including, in the latter case, the
system-defined constructor). You can still declare the pragma for individual functions. Such pragmas override the default pragma.
Try using that and let me know.
The docs says also that the declaration of the pragma for an overloaded function applies to the nearest one. You may also try to insert several declaration, one after every function declaration.
Bye Max

ORA-06571

Hi hussein,
We are in the process of migrating data from APPS 11.0.3 on NT to APPS 11.5.10.2 on AIX.
We used some db packages to aid us in converting the column values and their definitions from different tables.
One of theses packages is GL_FLEXFIELDS_PKG.
When I run this package on 11.5.10.2 using apps/apps users id, is works fine, but when I run it
on Apps 11.0.3 it throws this error:
select gl_flexfields_pkg.get_description(101,'01','01') from dual
ERROR at line 1:
ORA-06571: Function GET_DESCRIPTION does not guarantee not to update database
How do i resolve this error please....
Thanks a lot

thanks hussein :)
It says I have to inject PRAGMA RESTRICT ek ek :( will i not be tampering the Oracle Apps packages? This is in PROD NT 4.0 which is very sensitive and long time
desupported both OS and DB 8.0.5 and APPS 11.0.5 and almost in the verge of collapsing.

ORA-01006:bind variable does not exist for the QUERY

Dear All,
Please help on below query :
DECLARE
P_ROTATION_NO GCH_VSL_REGN.ROTATION_NO%TYPE :=21;
P_VESL_NO GCH_VSL_MASTER.VESL_NO%TYPE := NULL;
P_VESL_NAME GCH_VSL_MASTER.VESL_NAME%TYPE:= NULL;
P_FROM_REG_DATE GCH_VSL_MASTER.CREATED_DATE%TYPE:= NULL;
P_TO_REG_DATE GCH_VSL_MASTER.CREATED_DATE%TYPE:= NULL;
P_FROM_ARRIVAL_DATE GCH_VSL_REGN.ARRIVAL_DATE%TYPE:= NULL;
P_TO_ARRIVAL_DATE GCH_VSL_REGN.ARRIVAL_DATE%TYPE:= NULL;
P_CLOSE_TYPE GCH_VSL_CLOSE_DTLS.CLOSE_TYPE%TYPE:= NULL;
P_RESULT_LIST SYS_REFCURSOR;
P_TOTAL_LENGTH NUMBER;
P_ERROR_MESSAGE VARCHAR2(1000);
lv_sql1 VARCHAR2(5000);
lv_sql2 VARCHAR2(5000);
lv_whereClause VARCHAR2(5000);
pv_text VARCHAR2(1000);
BEGIN
pv_text := NULL;
lv_whereClause := ' WHERE GVM.VESL_MASTER_NUM = GVR.VESL_MASTER_NUM
AND GVR.ROTATION_NO = GVCH.ROTATION_NO
AND GVCH.CLOSE_HDR_ID = GVCD.CLOSE_HDR_ID(+)
AND (:P_ROTATION_NO IS NULL OR
(:P_ROTATION_NO IS NOT NULL AND
GVR.ROTATION_NO LIKE % :P_ROTATION_NO %))
AND GVM.IS_VALID = 1';
lv_sql1 := 'SELECT COUNT(gvr.rotation_no)
FROM gch_vsl_close_hdr gvch,
gch_vsl_master gvm,
gch_vsl_regn gvr,
gch_vsl_close_dtls gvcd'||lv_whereClause;
dbms_output.put_line (lv_sql1);
EXECUTE IMMEDIATE lv_sql1 INTO :P_TOTAL_LENGTH
USING P_ROTATION_NO;
END;
I am getting below error when running the above query
ORA-01006:     bind variable does not exist

why (date datatype assumed for variables with names containing DATE)
PROCEDURE XVY(P_ROTATION_NO IN GCH_VSL_REGN.ROTATION_NO%TYPE,
              P_VESL_NO IN GCH_VSL_MASTER.VESL_NO%TYPE,
              P_VESL_NAME IN GCH_VSL_MASTER.VESL_NAME%TYPE,
              P_CM_REGN_NO IN GCH_VSL_REGN.CM_REGN_NO%TYPE,
              P_FINAL_CLOSE_STA IN GCH_VSL_CLOSE_HDR.FINAL_CLOSE_STA%TYPE,
              P_FROM_REG_DATE IN GCH_VSL_MASTER.Created_Date%TYPE,
              P_TO_REG_DATE IN GCH_VSL_MASTER.CREATED_DATE%TYPE,
              P_FROM_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
              P_TO_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
              P_RESULT_LIST OUT SYS_REFCURSOR,
              P_TOTAL_LENGTH OUT NUMBER,
              P_ERROR_MESSAGE OUT VARCHAR2
             ) AS
lv_sql1        VARCHAR2(4000);
lv_sql2        VARCHAR2(4000);
lv_whereClause VARCHAR2(4000);
BEGIN
-- pv_text := NULL;
lv_whereClause := ' WHERE gvm.vesl_master_num = gvr.vesl_master_num '||
                      ' AND GVR.ROTATION_NO(+) = GVCH.ROTATION_NO '||
                      ' AND (:P_ROTATION_NO IS NULL '||
                      ' OR (:P_ROTATION_NO IS NOT NULL '||
                      ' AND   gvch.rotation_no LIKE ''%'' || :P_ROTATION_NO || ''%'' ' ||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_CM_REGN_NO IS NULL '||
                      ' OR (:P_CM_REGN_NO IS NOT NULL '||
                      ' AND   gvr.cm_regn_no LIKE ''%'' || :P_CM_REGN_NO || ''%'' '||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_VESL_NAME IS NULL '||
                      ' OR (:P_VESL_NAME IS NOT NULL '||
                      ' AND   gvm.vesl_name LIKE ''%'' || :P_VESL_NAME || ''%'' '||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_VESL_NO IS NULL '||
                      ' OR (:P_VESL_NO IS NOT NULL '||
                      ' AND   GVM.vesl_no LIKE ''%'' || :P_VESL_NO || ''%'' '||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_FINAL_CLOSE_STA IS NULL '||
                      ' OR (:P_FINAL_CLOSE_STA IS NOT NULL '||
                      ' AND   gvch.imp_close_sta LIKE ''%'' || :P_FINAL_CLOSE_STA || ''%'' '||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_FROM_REG_DATE IS NULL '||
                      ' OR (:P_FROM_REG_DATE IS NOT NULL '||
                      ' AND   gvch.created_date >= :P_FROM_REG_DATE '||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_TO_REG_DATE IS NULL '||
                      ' OR (:P_TO_REG_DATE IS NOT NULL '||
                      ' AND   gvch.created_date <= :P_TO_REG_DATE '||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_FROM_ARRIVAL_DATE IS NULL '||
                      ' OR (:P_FROM_ARRIVAL_DATE IS NOT NULL '||
                      ' AND   gvch.arrival_date >= :P_P_FROM_ARRIVAL_DATE '||
                      '      ) '||
                      '     ) '||
                      ' AND (:P_TO_ARRIVAL_DATE IS NULL '||
                      ' OR (:P_TO_ARRIVAL_DATE IS NOT NULL '||
                      ' AND   gvch.arrival_date <= :P_TO_ARRIVAL_DATE '||
                      '      ) '||
                      '     ) '||
                      ' AND gvm.is_valid = 10 ';
lv_sql1 := 'SELECT COUNT(gvr.rotation_no) '||
             ' FROM xvz gvch, '||
             '       zxsc gvm, '||
             '       dsae gvr, '||
             '       vvsd gvcd '|| lv_whereClause;
lv_sql2 := ' SELECT gvch.close_hdr_id, '||
             '        gvch.rotation_no, '||
             '        gvr.cm_regn_no, '||
             '        gvm.vesl_no, '||
             '        gvm.vesl_name, '||
             '        gvch.final_close_sta, '||
             '        gvr.arrival_date, '||
             '        gvch.close_date, '||
             '        gvr.created_date '||
             '   FROM xvz gvch, '||
             '        zxsc gvm, '||
             '        dsze gvr '|| lv_whereClause || 'ORDER BY gvch.rotation_no';
EXECUTE IMMEDIATE lv_sql1 INTO P_TOTAL_LENGTH
              USING P_ROTATION_NO,P_ROTATION_NO,P_ROTATION_NO,
                    P_CM_REGN_NO,P_CM_REGN_NO,P_CM_REGN_NO,
                    P_VESL_NAME,P_VESL_NAME,P_VESL_NAME,
                    P_VESL_NO,P_VESL_NO,P_VESL_NO,
                    P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,
                    P_FROM_REG_DATE,P_FROM_REG_DATE,P_FROM_REG_DATE,
                    P_TO_REG_DATE,P_TO_REG_DATE,P_TO_REG_DATE,
                    P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,
                    P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE;
OPEN P_RESULT_LIST
   FOR lv_sql2 USING P_ROTATION_NO,P_ROTATION_NO,P_ROTATION_NO,
                     P_CM_REGN_NO,P_CM_REGN_NO,P_CM_REGN_NO,
                     P_VESL_NAME,P_VESL_NAME,P_VESL_NAME,
                     P_VESL_NO,P_VESL_NO,P_VESL_NO,
                     P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,
                     P_FROM_REG_DATE,P_FROM_REG_DATE,P_FROM_REG_DATE,
                     P_TO_REG_DATE,P_TO_REG_DATE,P_TO_REG_DATE,
                     P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,
                     P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE;
END;instead of (the where clauses should be equivalent)
PROCEDURE XVY(P_ROTATION_NO IN GCH_VSL_REGN.ROTATION_NO%TYPE,
              P_VESL_NO IN GCH_VSL_MASTER.VESL_NO%TYPE,
              P_VESL_NAME IN GCH_VSL_MASTER.VESL_NAME%TYPE,
              P_CM_REGN_NO IN GCH_VSL_REGN.CM_REGN_NO%TYPE,
              P_FINAL_CLOSE_STA IN GCH_VSL_CLOSE_HDR.FINAL_CLOSE_STA%TYPE,
              P_FROM_REG_DATE IN GCH_VSL_MASTER.Created_Date%TYPE,
              P_TO_REG_DATE IN GCH_VSL_MASTER.CREATED_DATE%TYPE,
              P_FROM_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
              P_TO_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
              P_RESULT_LIST OUT SYS_REFCURSOR,
              P_TOTAL_LENGTH OUT NUMBER,
              P_ERROR_MESSAGE OUT VARCHAR2
             ) AS
lv_sql1        VARCHAR2(4000);
lv_sql2        VARCHAR2(4000);
lv_whereClause VARCHAR2(4000);
BEGIN
SELECT COUNT(gvr.rotation_no)
    INTO P_TOTAL_LENGTH
    FROM xvz gvch,
         zxsc gvm,
         dsae gvr,
         vvsd gvcd
   WHERE gvm.vesl_master_num = gvr.vesl_master_num
     AND GVR.ROTATION_NO(+) = GVCH.ROTATION_NO
     AND (P_ROTATION_NO IS NULL
      OR (P_ROTATION_NO IS NOT NULL
     AND   gvch.rotation_no LIKE '%' || P_ROTATION_NO || '%'
     AND (P_CM_REGN_NO IS NULL
      OR (P_CM_REGN_NO IS NOT NULL
     AND   gvr.cm_regn_no LIKE '%' || P_CM_REGN_NO || '%'
     AND (P_VESL_NAME IS NULL
      OR (P_VESL_NAME IS NOT NULL
     AND   gvm.vesl_name LIKE '%' || P_VESL_NAME || '%'
     AND (P_VESL_NO IS NULL
      OR (P_VESL_NO IS NOT NULL
     AND   GVM.vesl_no LIKE '%' || P_VESL_NO || '%'
     AND (P_FINAL_CLOSE_STA IS NULL
      OR (P_FINAL_CLOSE_STA IS NOT NULL
     AND   gvch.imp_close_sta LIKE '%' || P_FINAL_CLOSE_STA || '%'
     AND (P_FROM_REG_DATE IS NULL
      OR (P_FROM_REG_DATE IS NOT NULL
     AND   gvch.created_date >= P_FROM_REG_DATE
     AND (P_TO_REG_DATE IS NULL
      OR (P_TO_REG_DATE IS NOT NULL
     AND   gvch.created_date <= P_TO_REG_DATE
     AND (P_FROM_ARRIVAL_DATE IS NULL
      OR (P_FROM_ARRIVAL_DATE IS NOT NULL
     AND   gvch.arrival_date >= P_P_FROM_ARRIVAL_DATE
     AND (P_TO_ARRIVAL_DATE IS NULL
      OR (P_TO_ARRIVAL_DATE IS NOT NULL
     AND   gvch.arrival_date <= P_TO_ARRIVAL_DATE
     AND gvm.is_valid = 10;
OPEN P_RESULT_LIST
   FOR SELECT gvch.close_hdr_id,
              gvch.rotation_no,
              gvr.cm_regn_no,
              gvm.vesl_no,
              gvm.vesl_name,
              gvch.final_close_sta,
              gvr.arrival_date,
              gvch.close_date,
              gvr.created_date
         FROM xvz gvch,
              zxsc gvm,
              dsze gvr
        WHERE gvm.vesl_master_num = gvr.vesl_master_num
          AND GVR.ROTATION_NO(+) = GVCH.ROTATION_NO
          AND gvch.rotation_no LIKE '%' || nvl(P_ROTATION_NO,gvch.rotation_no) || '%'
          AND gvr.cm_regn_no LIKE '%' || nvl(P_CM_REGN_NO,gvr.cm_regn_no) || '%'
          AND gvm.vesl_name LIKE '%' || nvl(P_VESL_NAME,gvm.vesl_name) || '%'
          AND gvm.vesl_no LIKE '%' || nvl(P_VESL_NO,gvm.vesl_no) || '%'
          AND gvch.imp_close_sta LIKE '%' || nvl(P_FINAL_CLOSE_STA,gvch.imp_close_sta) || '%'
          AND gvch.created_date BETWEEN nvl(P_FROM_REG_DATE,gvch.created_date) AND nvl(P_TO_REG_DATE,gvch.created_date)
          AND gvch.arrival_date BETWEEN nvl(P_FROM_ARRIVAL_DATE,gvch.arrival_date) AND nvl(P_TO_ARRIVAL_DATE,gvch.arrival_date)
          AND gvm.is_valid = 10;
        ORDER BY gvch.rotation_no;
END;Regards
Etbin
Edited by: Etbin on 8.4.2012 14:37
In order not to waste your time in the future:
Don't execute dynamic SQL until it works !!!
Write out what you managed to put together using dbms_output.
Paste that into the SQL window of your client tool (SQL Developer ...)
Convert parameters to bind variables (replace p_ with :p_)
Try to run it.
If errors are thrown correct them, adjust the procedure/function set up to write your dynamic SQL accordingly
Repeat the cycle until no errors are thrown
Comment out the dbms_output. ... line
Uncomment the execute immediate ... line

Why an "ORA-01006: bind variable does not exist" error when no dynamic SQL?

Hi all,
While running PL/SQL in SQL Developer 3.2.09, I got the following error after adding a section of code. Note that nothing I'm doing has anything to do with dynamic SQL (which is what 01006 is supposedly about).
Error report:
ORA-01006: bind variable does not exist
01006. 00000 - "bind variable does not exist"
*Cause:
*Action:
After commenting out the new chunk of code that caused the error, the error persisted.
After deleting the new code, the error went away.
What the heck!?!? If you have any ideas, please lay 'em on me.
Thanks so much,
Kim
P.S. It's a few hundred lines of code, so I didn't append it to this post and I don't see how to attach a file.

Let's review a few facts:
1. You post a question in the sql developer forum that has no apparent relation to sql developer. You could confirm this by doing the test using sql*plus or some other tool.
2. You provide NO information about what database you are even using. The only clue is an ORA -xxx message that means SOME version of Oracle is involved.
3. You provide NO information about what the four digit version of Oracle DB is being used.
4. You provide NO information about what the code in general or what that specific section of the code is even doing. The code could be doing literally anything that Oracle is capable of doing.
That's a bit like calling a mechanic you don't know, telling them your car is making a funny noise and asking them what the problem with your car is.
>
While running PL/SQL in SQL Developer 3.2.09, I got the following error after adding a section of code. Note that nothing I'm doing has anything to do with dynamic SQL (which is what 01006 is supposedly about).
Error report:
ORA-01006: bind variable does not exist
01006. 00000 - "bind variable does not exist"
*Cause:
*Action:
The error gives no indication of where the error occurred in the code.
>
Your first clue that your troubleshooting method is seriously flawed is when you make statements that aren't supported by any evidence at all but appear to be nothing but your opinion.
Your second clue is when those statements appear to directly contradict what Oracle is telling you.
I'm talking about these two statements you make; which you state as if they were universal truths
>
nothing I'm doing has anything to do with dynamic SQL
(which is what 01006 is supposedly about).
>
If thoe were true then your 'unstated' conclusion appears to be that Oracle is wrong in saying 'bind variable does not exist'
Sorry - but I would place my money on Oracle.
I'm sure the above may sound harsh - it is intended to be. My four major rules (there are more) when troubleshooting Oracle problems.
1. Assume that Oracle is CORRECT when it tells you there is a problem.
2. Assume that you are WRONG if your opinion conflicts with what Oracle is telling you - see rule #1.
3. Don't make ANY other assumptions. You can form hypotheses but don't state them as facts until they are proven.
4. Your 'opinion' is only useful to the extent that it can help you form meaningful hypotheses - see rule #3.
>
To reiterate, there is no dynamic SQL in the code.
>
To reiterate - if, as you state, that error relates to dynamic SQL and bind variables then it can not be disputed that:
ORACLE DOESN'T AGREE WITH YOU!
So let's try it my way and hypothesize that Oracle is correct (see rule #1 above).
Then by definition this statement by Oracle is correct
>
ORA-01006: bind variable does not exist
>
And that should immediately raise this question:
1. where might there be a bind variable that does not exist?
which leads to a prerequisite question:
2. where are ALL of the bind variables that might be being used?
Question #2 is where you need to start your search. Here are at least five possibilities (there are more)
1. your code - this should be easiest to check and you state that your 'anonymous' block does not have any.
2. a table trigger - triggers that use the :NEW, :OLD or :PARENT pseudocolumns. Those psuedocolumns are BIND variables and the trigger code that uses them is, by definition, dynamic sql.
3. a pl/sql package/function/procedure - any of these might be being called from trigger code or a view that is involved in the transaction. Any of these could take a parameter and/or use bind variables and cause your problem if that bind variable does 'not exist'.
4. a functional index - can also trigger code from #3 above
5. an audit trigger that logs the audit activity that your user or your code is performing. This code could be trying to use a SYS_CONTEXT environment variable that has not been created and cause a 'bind variable does not exist' error.
See rule #1 - Oracle is CORRECT. Until you have identified and examined ALL of the code (not just your anonymous block) being executed and ruled it out you should continue with the hypotheses that Oracle is CORRECT.
In the (extremely) unlikely event that you can show that Oracle is NOT correct you should file a SOR with Oracle.

ORA-12514: TNS:listener does not currently know of service requested

While connecting "sqlplus SYSADM/SYSADM@HCM" I am getting the below error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Installation background:
Windows 7 l(64-bit) laptop.
Created linux virtualbox to installl peoplesoft VM templates.
so far installed: Oracle11gR2.vdi and HCMDB.vdi on the linux virtualbox.
Followed the steps exactly what it is in the link below: Got the above error in page 4 of the link at connecting to database via sqlplus.
http://bloggingaboutoracleapplications.org/running-oracle-vm-templates-oracle-enterprise-linux-guide-part-1-7/
Below provided initHCM.ora, tnsnames.ora, listerner.ora and some responses I tried. I could not figure out what causing the issue even after researching in web.
Your help would be highly appreciated.
tnsnames.ora:
=============
# tnsnames.ora Network Configuration File:
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM)
Listener.ora:
=============
# listener.ora Network Configuration File:
/u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
initHCM.ora:
============
DB_FILES =256
OPEN_CURSORS = 1000
db_block_size = 8192
remote_login_passwordfile = NONE
undo_tablespace=PSUNDOTS
NLS_LENGTH_SEMANTICS=CHAR
# Cache and I/O
#db_block_size=
db_file_multiblock_read_count=16
# Database Identification
# db_domain=us.oracle.com
# db_name=
# Diagnostics and Statistics
#background_dump_dest=
#core_dump_dest=
#user_dump_dest=
# Job Queues
job_queue_processes=10
# Processes and Sessions
processes=150
# SGA Memory
sga_target=287309824
# Security and Auditing
#audit_file_dest=
#remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=95420416
# System Managed Undo and Rollback Segments
undo_management=AUTO
#undo_tablespace=
unnestsubquery=false
# Miscellaneous
compatible=11.2.0.2.0
control_files=(/u01/app/oracle/oradata/HCM/control01.ctl)
DB_NAME=HCM
[oracle@hcmdb91 ~]$ tnsping hcm
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
07:40:37
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
HCM)))
OK (20 msec)
[oracle@hcmdb91 ~]$
[oracle@hcmdb91 ~]$ tnsping hcm
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
07:40:37
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
HCM)))
OK (20 msec)
[oracle@hcmdb91 ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:41:32
Copyright (c) 1991, 2010, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
[oracle@hcmdb91 ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 28-MAR-2013 07:29:21
Uptime 0 days 0 hr. 13 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File
/u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
Listener Log File
/u01/app/oracle/product/11.2.0.x/db_1/log/diag/tnslsnr/hcmdb91/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hcmdb91.example.com
)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully
[oracle@hcmdb91 ~]$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:44
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@hcmdb91 ~]$
[oracle@hcmdb91 ~]$ sqlplus SYSADM/SYSADM@HCM
SQL*Plus: Release 11.2.0.2.0 Production on Thu Mar 28 07:44:25 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in
connect descriptor
My guess is that the database service "HCM" is not up and running but not sure how to make up and running. Even I could not find it listed in the linux services list.
Note: Able to login sqlplus using "sqlplus sys/sys as sysdba" but failing to access database table as "select * from PSRECDEFN;"
thanks
Espii.
Edited by: 995437 on Mar 28, 2013 6:52 AM
Edited by: 995437 on Mar 28, 2013 6:59 AM

Hi Nicolas,
I have no luck and the error still persists.
I have set the "export ORACLE_SID=HCM" from root user and oracle user too.
I guess, I have already loaded database when I ran the "cd /opt/oracle/psft/vm
./oraclevm-template.sh"
The outcome of the above script as similar as below:
Creating
ovm_configure_pre
CreateVirtualEnvironment
/u01/scripts/db-reconfig.sh: line 238: ovm_set_password: command not found
/u01/scripts/db-reconfig.sh: line 239: ovm_configure_network: command not found
INFO:
Starting Oracle database reconfiguration.
Oracle Database Configuration
This will configure on-boot properties of Oracle Database.
The following questions will determine whether the database should be
starting upon system boot, the ports it will use.
Press <Enter> to accept the defaults.
Do you want to relink binaries? (y/n) [n] y
Specify a port that will be used for the database listener [1521]:
Do you want Oracle Database to be started on boot (y/n) [y]:y
Wrote to /etc/sysconfig/oracle11g
Relinking Oracle Binaries...
Oracle Relinking Completed Successfully
Logs: /home/oracle/relink.log
Running orainstRoot.sh and root.sh...
set 2GB tmpfs
Enabling Oracle Database service
Configuration Completed Successfully.
Enter the name of the database SID [TESTDB]:HCM
ORACLE instance started.
Total System Global Area 288104448 bytes
Fixed Size 2225832 bytes
Variable Size 104859992 bytes
Database Buffers 176160768 bytes
Redo Buffers 4857856 bytes
Control file created.
Database altered.
Tablespace altered.
Tablespace altered.
Tablespace altered.
1 row updated.
160 rows updated.
Commit complete.
Kumar - I have found no sqlnet.ora file exist in the $ORACLE_HOME/NETWORK/ADMIN
Edited by: 995437 on Mar 28, 2013 9:15 AM

ORA-27473: argument 1 does not exist

Hello
I've been trying to create a file_watcher to check for files arriving at the filesystem. But keep getting the error "ORA-27473: argument 1 does not exist ". I've searched forums but can't find an answer to get me on track.
Does anyone know why I get this error?
The examples I've been following are those provided by oracle and some from the web. All very simple and run, but mine does not.
The system I'm using is a Oracle prebuilt VM 'Database App Development VM', where the OS is Oracle Linux 5 and Oracle Database 11.2 EE.
An example is this: http://awads.net/wp/2011/03/29/did-you-know-about-file-watchers/
/JacMa

Just wondering whether your enter this part correctly ?
BEGIN
2 DBMS_SCHEDULER.create_program (
3 program_name => 'image_watcher_p',
4 program_type => 'stored_procedure',
5 program_action => 'process_image_files',
6 number_of_arguments => 1,
7 enabled => FALSE);
8 DBMS_SCHEDULER.define_metadata_argument (
9 program_name => 'image_watcher_p',
10 metadata_attribute => 'event_message',
11 argument_position => 1);
12 DBMS_SCHEDULER.enable ('image_watcher_p');
13 END;
14 /

About ora-01006 :bind variable does not exist

Hi all of you,i have this dynamic sql :
DECLARE
v_query clob;
cpt number;
begin
v_query:='
SELECT
count(TBA.ANT_ID)
FROM
WHERE TBA.ANT_FUT_ID = TFT.FUT_ID
       AND TBA.ANT_KATEGORIE_CODE_ID = TAKCL.ANT_KATEGORIE_CODE_ID(+)
       AND TBA.ANT_KFZ_REIHEN_ID = TKR.KFZ_REIHEN_ID(+)
       AND TBA.ANT_ID = F1.ANT_ANT_ID(+)
       AND TBA.ANT_ID = F2.ANT_ANT_ID(+)
       AND TBA.ANT_ID = F3.ANT_ANT_ID(+)
       AND TBA.ANT_ID = ERS.ers_bdk(+)
       AND TBA.ANT_ID = F1_2.ANT_ANT_ID(+)
       AND TBA.ANT_ID = F2_3.ANT_ANT_ID(+)
       AND TBA.ANT_ID = MFU.MFU_ANT_ID(+)
       AND MFU.MFU_NIETGEOMETRIE_ID = NG.NG_ID(+)
       AND MFU.MFU_MATRIZEN_BEICHNUNG_ID = MZB.MZB_ID(+)
    -- Suchkriterien: --
    --Ersteller
    AND DECODE( ERS.ers_id, NULL, ''%'', ERS.ers_name ) LIKE DECODE('':1'',NULL,''%'','''')||''''|| :1 ||''''||DECODE('':1'',NULL,''%'','''')
     --Fahrzeug
    AND DECODE( TKR.NAME, NULL, ''%'', TKR.NAME ) LIKE DECODE('':2'',NULL,''%'','''')||''''|| :2 ||''''|| DECODE('':2'',NULL,''%'','''')
     --BDK
    AND DECODE( fuege_db.bdk_nummer( TBA.ANT_ID,''.'' ), NULL, ''%%'',
   fuege_db.bdk_nummer( TBA.ANT_ID,''.'' ) )   LIKE ''%''||:3||''%''
    --Technologie
    AND TBA.ANT_FUT_ID LIKE DECODE('':4'',NULL,''%'','''')||''''|| :4 ||''''||DECODE('':4'',NULL,''%'','''')
     --Art
    AND ((TBA.ANT_WFP_ID is null and 1=DECODE('':5'',NULL,1,1,1) ) or (TBA.ANT_WFP_ID is not null and 2=DECODE('':5'',NULL,2,2,2)))
    --VTA
    AND TBA.ANT_VTA = decode('':6'',1,1,TBA.ANT_VTA) ';
execute immediate v_query
into cpt USING
'Dominik Hussmann',
'AU736_Q7_SUV' ,
'WPS Stahl',
'0';
end ;
In the execution,i have this error :ora-01006 :bind variable does not exist, after analyzing,i have found that the problem is with parameters :5 and :6 ,i don't understand they have the same syntax
as bind variables 1,2,3 and 4.
Than you for any suggestion.

I hope you do realise that there are 13 bind-variables in your sql, not 6?
Variables are bound by position. You cannot use the same bind variable twice, they will be 2 distinct bind variables.
For example, you use :1 three times, so you need to provide three arguments, in this case three times the same value.

ORA-20001 FLEX-ID DOES NOT EXIST

Hi Experts,
Please am having this issue when running create Grade api for HCM of Oracle EBS.
When i execute this script below to existing Business Group( Vision University 1759 or Vision Corporation 202 ) data is transferred to per_grades and per_grade_definitions tables
But when i execute this same script pointing to a Business Group (TEST BG 7891) we created by ourself it gives error code ORA-20001 FLEX-ID DOES NOT EXIST
I have a strong feeling that creating our Business Group and setting up the Grade Flexfield has a problem, but i can 't trace the fault, am not EBS expert
Please can you please advice where am going wrong !!
Thanks,
Kwesi
SCRIPT BELOW:
Procedure Create_Grade
is
l_Validate Boolean := FALSE;
l_Business_Group_id Number(15,2);
l_Date_From Date;
l_Sequence Number(15,2);
l_Grade_id Number(15,2);
l_Object_Version_Number Number(15,2);
l_Grade_Definition_id Number(15,2);
l_Name Varchar2(100);
l_OVN Number(15,2) := 1;
i Number;
Begin
For Grad In (Select * from chr_Grades where OVN IN l_OVN) loop
Begin
apps.hr_grade_api.Create_Grade(
p_Validate => l_Validate,
p_Business_Group_id =>7891,
p_Date_From => to_Date(sysdate,'DD-MM-YYYY'),
p_Sequence => 11,
p_Grade_id => l_Grade_id,
p_Object_Version_Number => l_Object_Version_Number,
p_Grade_Definition_id => l_Grade_Definition_id,
p_Name => l_Name,
p_segment1 => Grad.Grade_id,
p_segment2 => Grad.Grade_Name,
p_segment3 => Grad.Grade_Description
Update chr_Grades Set OVN = 2
where Grade_id = Grad.Grade_id;
End;
End loop;
Commit;
End Create_Grade;

Well, i found the solution to my problem, and is just creating the segment you want to use in your flexfield without PASSING ANY VALUESET.

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

I am getting this error message "ORA-01006: bind variable does not exist.

My code works fine like this:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
FROM R5EVENTS WHERE ROWID = :ROWID;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;
But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
DECLARE
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
V_CODE varchar2(8);
V_EVENT varchar2(8);
V_TRADE varchar2(8);
BEGIN
SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
v_GROUP varchar2(30);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
AND USR_CODE = O7SESS.CUR_USER;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?

The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

ORA-00339: archived log does not contain any redo

Hi All,
recently we faced 'ORA-00339: archived log does not contain any redo' issue at standby side,
after searching on Google and from Metalink (note 30866.1 and 7197445.8 ) I find out that this is the known issue for 10g and below versions, our's is 11.2.0.3,
Error in Alert Log :
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
ORA-00339: archived log does not contain any redo
ORA-00334: archived log: '/redolog2/redo/redolog3a.log'
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc (incident=190009):
ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
Incident details in: /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/incident/incdir_190009/DWPRD_pr0a_48412_i190009.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Slave exiting with ORA-10562 exception
Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
ORA-10562: Error occurred while applying redo to data block (file# 1, block# 56702)
ORA-10564: tablespace SYSTEM
ORA-01110: data file 1: '/oradata1/database/DATAFILES/system01.dbf'
ORA-10561: block type 'TRANSACTION MANAGED DATA BLOCK', data object# 2
ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
Mon Apr 15 11:34:12 2013
Dumping diagnostic data in directory=[cdmp_20130415113412], requested by (instance=1, osid=48412 (PR0A)), summary=[incident=190009].
Thanks

Hi,
"The archived log is not the correct log.
It is a copy of a log file that has never been used for redo generation, or was an online log being prepared to be the current log."
"Restore the correct log file."
Can you say, what is last changes on your database, On log files?
Did you copies your '/redolog2/redo/redolog3a.log' log file from other ?
Regards
Mahir M. Quluzade

ORA-12514: TNS:listener does not currently know of service requested in con

Hi All,
I am trying to create a physical standby using RMAN duplicate command.Yesterday I created it succesfully ,today I dropped the standby database I tried to create new one when I got hit by this error"
<code>
[email protected](standby) $ rman target sys/root123#@db1 auxiliary sys/root123#@standby
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Mar 3 11:38:08 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[email protected](standby) $
</code>
below is my tnsname and listener files from primary
[email protected](db1) $ pwd
/u01/app/oracle/dbhome_1/network/admin
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $ ls -ltr
total 28
-rw-r--r-- 1 oracle oinstall 187 May 7 2007 shrept.lst
drwxr-xr-x 2 oracle oinstall 4096 Sep 12 22:12 samples
-rw-r--r-- 1 oracle oinstall 40 Jan 20 03:38 sqlnet.ora_1
-rw-r----- 1 oracle oinstall 1004 Mar 3 00:33 tnsnames.ora
-rw-r--r-- 1 oracle oinstall 1004 Mar 3 11:27 tnsnames13030311AM2745.bak
-rw-r--r-- 1 oracle oinstall 514 Mar 3 11:27 listener13030311AM2745.bak
-rw-r--r-- 1 oracle oinstall 508 Mar 3 11:28 listener.ora
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = primary.swapnilkambli.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db1.primary.swapnilkambli.com)
RCAT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = primary.swapnilkambli.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rcat.primary.swapnilkambli.com)
DB2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = primary.swapnilkambli.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db2.primary.swapnilkambli.com)
STANDBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = standby.swapnilkambli.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = standby.standby.swapnilkambli.com)
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $ cat listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = rcat.primary.swapnilkambli.com)
(ORACLE_HOME = /u01/app/oracle/dbhome_1)
(SID_NAME = rcat)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = primary.swapnilkambli.com)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
[email protected](db1) $
[email protected](db1) $ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 03-MAR-2013 11:42:52
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=primary.swapnilkambli.com)(PORT=1521)))
Services Summary...
Service "db1.primary.swapnilkambli.com" has 1 instance(s).
Instance "db1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:6 refused:0 state:ready
LOCAL SERVER
Service "db1XDB.primary.swapnilkambli.com" has 1 instance(s).
Instance "db1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: primary.swapnilkambli.com, pid: 2617>
(ADDRESS=(PROTOCOL=tcp)(HOST=primary.swapnilkambli.com)(PORT=23611))
Service "rcat.primary.swapnilkambli.com" has 1 instance(s).
Instance "rcat", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
[email protected](db1) $ tnsping db1
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 03-MAR-2013 11:43:36
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = primary.swapnilkambli.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = db1.primary.swapnilkambli.com)))
OK (0 msec)
[email protected](db1) $
[email protected](db1) $
[email protected](db1) $ tnsping standby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 03-MAR-2013 11:43:44
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = standby.swapnilkambli.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = standby.standby.swapnilkambli.com)))
OK (0 msec)
and below are my entries from standby server
[email protected](standby) $ pwd
/u01/app/oracle/dbhome_1/network/admin
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $ ls -ltr
total 24
-rw-r--r-- 1 oracle oinstall 187 May 7 2007 shrept.lst
drwxr-xr-x 2 oracle oinstall 4096 Sep 12 22:12 samples
-rw-r----- 1 oracle oinstall 576 Mar 3 11:21 tnsnames.ora
-rw-r--r-- 1 oracle oinstall 576 Mar 3 11:25 tnsnames13030311AM2540.bak
-rw-r--r-- 1 oracle oinstall 514 Mar 3 11:25 listener13030311AM2540.bak
-rw-r--r-- 1 oracle oinstall 514 Mar 3 11:26 listener.ora
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = primary.swapnilkambli.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db1.primary.swapnilkambli.com)
STANDBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = standby.swapnilkambli.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = standby.standby.swapnilkambli.com)
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $ cat listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = standby.standby.swapnilkambli.com)
(ORACLE_HOME = /u01/app/oracle/dbhome_1)
(SID_NAME = standby)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = standby.swapnilkambli.com)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
[email protected](standby) $
[email protected](standby) $ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 03-MAR-2013 11:43:14
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=standby.swapnilkambli.com)(PORT=1521)))
Services Summary...
Service "standby" has 1 instance(s).
Instance "standby", status BLOCKED, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "standby.standby.swapnilkambli.com" has 1 instance(s).
Instance "standby", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0
LOCAL SERVER
The command completed successfully
[email protected](standby) $ tnsping db1
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 03-MAR-2013 11:49:12
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = primary.swapnilkambli.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = db1.primary.swapnilkambli.com)))
OK (0 msec)
[email protected](standby) $
[email protected](standby) $
[email protected](standby) $ tnsping standby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 03-MAR-2013 11:49:18
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = standby.swapnilkambli.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = standby.standby.swapnilkambli.com)))
OK (0 msec)
tnsping works from both side I am able to connect from primary as below:
[email protected](db1) $ rman target sys/root123#@db1 auxiliary sys/root123#@standby
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Mar 3 11:44:23 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DB1 (DBID=1402881212)
connected to auxiliary database: DB1 (not mounted)
RMAN>
DB version 11.2.0.1.0
OS version Linux 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
primary server--- primary.swapnilkambli.com
primary database--- db1
standby server--- standby.swapnilkambli.com
standby database--- standby
After I dropped the physical standby first time I did make some changes in tns of standby server which I dont recollect.
Help on this error ORA-12514 is available on internet but I did not find anything helpful to my situation
Edited by: user12860499 on Mar 2, 2013 10:45 PM

GOT IT!!!!
I check listener trace and found below:
Log messages written to /u01/app/oracle/diag/tnslsnr/standby/listener/alert/log.xml
03-MAR-2013 12:21:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=standby.swapnilkambli.com)(USER=oracle))(COMMAND=reload)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * reload * 0
03-MAR-2013 12:22:00 * service_register * standby * 0
Sun Mar 03 12:22:16 2013
03-MAR-2013 12:22:16 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=db1.primary.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=standby.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=39512)) * establish * db1.primary.swapnilkambli.com * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
03-MAR-2013 12:22:20 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=standby.standby.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=standby.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.56.102)(PORT=54862)) * establish * standby.standby.swapnilkambli.com * 0
03-MAR-2013 12:22:20 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=standby.standby.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=standby.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.56.102)(PORT=54863)) * establish * standby.standby.swapnilkambli.com * 0
03-MAR-2013 12:22:20 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=standby.standby.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=standby.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.56.102)(PORT=54864)) * establish * standby.standby.swapnilkambli.com * 0
Sun Mar 03 12:22:27 2013
03-MAR-2013 12:22:27 * service_update * standby * 0
Sun Mar 03 12:22:40 2013
03-MAR-2013 12:22:40 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=standby.standby.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=primary.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.56.101)(PORT=60821)) * establish * standby.standby.swapnilkambli.com * 0
03-MAR-2013 12:22:40 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=standby.standby.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=primary.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.56.101)(PORT=60822)) * establish * standby.standby.swapnilkambli.com * 0
03-MAR-2013 12:22:40 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=standby.standby.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=primary.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.56.101)(PORT=60823)) * establish * standby.standby.swapnilkambli.com * 0
03-MAR-2013 12:22:42 * service_update * standby * 0
03-MAR-2013 12:22:45 * service_update * standby * 0
Sun Mar 03 12:22:51 2013
03-MAR-2013 12:22:51 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=db1.primary.swapnilkambli.com)(CID=(PROGRAM=rman)(HOST=standby.swapnilkambli.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=39536)) * establish * db1.primary.swapnilkambli.com * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
there was a entry in /etc/hosts which was directing primary.swapnilkambli.com to 127.0.01
This was because I created this OS from a Virtual box template wherein that entry was made.
I changed the /etc/hosts to refelct the true address and it worked!!

ORA-06571: Function TEST_FUNC does not guarantee not to update database

Similar Messages

Maybe you are looking for