Interface development using bloard03 and cond_a01

Hi,
I want to create an inbound idoc for purchasing contarcts has conditions at header level and line item level . So I need to use bloard03 and cond_a01 in combination .
please suggest how do we relate the two message type and guide me how to develop and interface for the same

Hi,
use the message type COND_A and the process code COND in the partner profile. You have a std FM "IDOC_INPUT_COND_A" linked to this process code which posts the documents and the purchasing document number will be sent by the other system.
Thanks & regards

Similar Messages

Bloard03 and cond_a01 relationship

Hi All ,
I have a scenerio where I need to create an inbound idoc for contarcts with refernce to Purchase requisition that has conditions at line item level . So I need to use bloard03 and cond_a01 in combination .
please suggest how do we relate the two message type .
Regards
Chan

Hi,
use the message type COND_A and the process code COND in the partner profile. You have a std FM "IDOC_INPUT_COND_A" linked to this process code which posts the documents and the purchasing document number will be sent by the other system.
Thanks & regards

HT4686 How can I publish my website developed using iWeb and have all functions of the blog page work as it did with MobileMe?

I have developed a website using iWeb and it includes a blog page selected from stock pages in iWeb. I'm publishing it with GoDaddy and when I do that the interactive functions of the blog page don't work. (Adding comments and photos as well as searching). Is there any simple way to host this site somewhere so that those functions work?

No, because all those functions were MobileMe only and now that MobileMe has gone, they won't function any longer.
To enable these to function, you either need to add them yourself or change your blogging platform to something else such as WordPress etc., and create a link from iWeb to your WordPress blog or embed the blog page using iframe into your iWeb site.
Commenting systems such as Disqus or http://www.intensedebate.com work quite well.

ABAP interfaces build using BDC and BAPIs can be used/replaced with the XI?

Hi,
We have develeloped our interfases using BDC and BAPIs. Now our client has decited to implement XI. Now could you please help in finding whether these interfaces can be used/replaced with the XI.
If yes, please let us know how?
Thanks and Regards,
Shweta

Singh,
Check this threads where they have discussed on how to use them with XI:
import BAPI into XI
Re: interface of xi with bapi
Re: BDC
Regards,
---Satish

What tools does Microsoft use to mock UI interfaces, flowchart, use cases, and UML diagrams?

I have searched google, but was not able to find article or blogs to answer this question. The questions asked here are very old. So I think this is a very relevant question today.
We are a .NET group and we to update how we storyboard our application development. What tools does Microsoft use to mock UI interfaces, flowcharts, and use cases? Specifically for projects that are either C# .NET MVC 5 and above (looking forward to
vNext).
In the past, power point was able to do some of these things, but it seems it has been deprecated? Does Visio use these things? Also, is Visual Studio's 2013 UML diagram any good or is there another tool in Microsoft's bag of goodies that has more options?
I have read about blend, but it does not seem to be .NET MVC specific.
Again, this is asking about what tools Microsoft teams usually use to storyboard as our team would like to mimic the more contemporary processes. We are in the process of upgrading our .NET applications and feel it is time to update our workflow process
as well.
Any book recommendations on TFS 2013 and agile are welcomed as well.

hlyates,
Sorry but you have posted to a forum that deals exclusively with questions/issues about Microsoft Project, a project management application.
I suggest you delete this post and start with the following: http://social.technet.microsoft.com/Forums/projectserver/en-US/home?forum=whatforum
John

Good start to a .gitignore file for development using VS2010 and GitHub commits

I apologize if this has already been answered; I searched and did not find any pointers to the information that I am looking for, but my google-fu is not always the best.
After recently getting back into C# development and restarting using Virtual Studio, I've realized that, using the standard GitHub GUI client, I'm committing a huge amount of binary files. Obviously, being as I'm just committing the top-level project
directory and everything including build trees underneath it.
Does anybody know of a good source to find a .gitignore file that will exclude most, if not conclusively all, of these files? I only want the files essential to develop the project on the repository; I have a free account, I can't handle the amount
of space being used. Basically whatever is the bare minimum source and directory hierarchy required to rebuild the project in a new instance of Virtual Studio.
Thanks for your time and consideration on this matter. Any pointers to relevant links or direct help appreciated.
-Damon Getsman

Hi Damon,
I am glad that you have solved the problem and thanks for your share us the solution here, so it would be helpful for other members who get the same issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Developer (using TNS and LDAP) fails

If I use a Basic Connection Type and specify the Host, Port and Service Name I can get connected.
If I use a TNS Connection Type and click on the appropriate Network Alias I get:
Status: Failure -lo exception: SO exception was generated.
The SQLNET.ORA file has this entry:
NAMES.DIRECTORY_PATH= (LDAP)
SQL*Plus connections work fine.
Has anyone seen this issue and resolved it ?
Thanks,
Bob Larsen

Bob,
TNS connection with Network Alias option should work.
I assume you have a local tnsnames.ora file with the database entry.
You can launch sqldeveloper from sqldeveloper\sqldeveloper\bin\sqldeveloper.exe
or sqldeveloper\sqldeveloper\bin\sqldeveloper.bat.
This will give a stack trace.
Thanks,
Sri

Deployment of JSP application developed using Jdeveloper

Is it Possible to deploy/implement JSP Application developed using Jdeveloper and its Application Module, View object etc. , without using an Application Server, such has hosting at the ISP servers, but having Oracle as the back end ?

Either you or your ISP will have to have a java enabled application server.

IPhone application Development using C#

Hi Dear,
I am a c# windows developer. I am new for iPhone Application development. So could any one guide me how to start iPhone development using C#.
and which tools I need for developing. and please send the download links.
Thanks & Regards
Chandan Kumar Saw
[email protected]

I don't want to start a flame war or anything, but I'd think very carefully before using Mono. Don't get me wrong, it's a good system and improving all the time, but it's relatively immature and you might be letting yourself into a world of pain. Case in point: less than 30 minutes ago I used the Mono Develop IDE to check out a student C# console project.... For whatever reason, MD went horribly wrong; it pinwheeled continuously and refused to shut down in response to Force Quit. Even trying to kill it off in Activity Monitor failed. In the end I had to reboot OS X. Unfortunately this was not the first time I've had this experience with Mono Develop.
If your project is just a bit of fun, then by all means give it a try, but if you're a serious developer then be aware of the risks you're running with such new technology.
Bob

Code to retrive the sender and receiver interface names using custome adapter module

Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.

Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM

How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy .

I bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple

i bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
Serial Number (system): W8******66D
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(121877)

What i use to develop complex tree and table in my web application?

hi guys
simply most of my work in my web application will be depend on:
1-tree
2-table
i need this tree and table deal with database table (or even tables) must be able to do every thing like add node/row/column, delete, update, drag-n-drop, various object nodes/cells like check-box, list, images...etc
i used JTree and JTable then stoped because i faced problems in dealing with applet/database, and i really didnt see this is perfect way to do that even i agree that JTree and JTable are excellent objects. i also start using ajax tree but i didnt see it robust to have all this complicated work with database.
by the way i need also master-detail UI table, but its easy to get this if i have good and flexable table object.
my rest pages developed by jsp, servlet, javascript, html...etc
so any suggestion to how i build this tree and table? i also heared about JSF, is it serve me?
thanks

so if the only way to use JTree and JTable,There are other ways, but they're not Java and might be more complicated.
are there
any links you have discussing dealing database with
applet by keep applet away from direct connection to
my database?I'm not aware of links, but it's common sense. You don't want to expose the DB server to the internet, and instead contact a server for authentication that then forwards the request to the DB.

Develop Module use of + and minus keys to make adjustments, can the default step size be altered?

In the Develop Module you are able to click on the name of the slider and then use the + and - keys to adjust each element eg Exposure, Contrast etc etc. The adjustment steps are too large and I would like to be able to change the increments. Has anyone worked out if this is possible?

Hi Ian,
You are the last person I ever want to correct around here, but.... it's the . (period) / , (comma) keys for cycling through the Basic adjustments. This is very handy; thanks for pointing it out.
As for adjustment size, pressing Shift does make the increments larger, but pressing Alt (on PC) is for Resetting the Tone and Presence sliders. Using the +/- keys work as expected, but the Up and Down arrows don't always move the sliders.
John

Can I use iphone in BMW via usb interface for phone call and ipod functions

Can I use iphone in BMW via usb interface for phone call and ipod functions

Why don't you check the manual for your car or ask your dealer?

Interface development using bloard03 and cond_a01

Similar Messages

Maybe you are looking for