Ora-08102 - error help me out

dear all,
Im getting ora-8102 error
"ORA-00604: error occurred at recursive SQL level 1
ORA-08102: index key not found, obj# 49, file 47, block 25578 (2)" while im creating index on newly created table . I found the suggestion doc from metalink for the same. but it didn't work. because the obj#49 is the index (I_CON2) which related to table CON$. so im not able to rebuild the index as suggested in metalink.
Im getting the same erorr for all schema even creating new table with constraints.
Thanks
mohan

Why not ?Just a guess, since there is no error message from OP, Probably because:
SQL> alter index I_CON2 rebuild ;
alter index I_CON2 rebuild
ERROR at line 1:
ORA-00701: object necessary for warmstarting database cannot be altered
SQL> disc
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SQL>

Similar Messages

ORA-00600 Error Help required

I am getting Error ORA-00600 for a procedure which tries get
a CLOB as output paramater. It is a simple stored proc which is
just querying to get this data.
However it fails at times giving ORA-00600 error which we have
no clue why it's happening.
There is sufficient space in the server and also we have
restarted the database several times.
Any pointers to why is this happening.
Sunil

Cause:     This is a catchall internal error message for Oracle
program exceptions. It indicates that a process has met a low-
level, unexpected condition.
Various causes of this message include:
time-outs
     file corruption
     failed data checks in memory
     hardware, memory, or I/O errors
     incorrectly restored files
The first argument is the internal message number. Other
arguments are various numbers, names, and character strings. The
numbers may change meanings between different versions of the
Oracle Server.
Action:     Report this error to customer support after gathering
the following information:
-events that led up to the error
     -the operations that were attempted that led to the
error
-the conditions of the operating system and database at
the time of the error
     -any unusual circumstances that occurred before
receiving theORA-00600 message
     contents of any trace files generated by the error
     the relevant portions of the Alert file
Copyright (C) 1995, Oracle Corporation

Ora 12154 error help needed

Hi,
I am a newbie in oracle forms. I have installed oracle database 10gr2 on windows xp in c directory. In D drive i have installed oracle developer suite 10g. When i try to connect database from developer suite i receive ORA 12154 error.
Do i need to change tnsnames.ora in developer suites 'D' directory or in database'C' directory.
Please explain me in steps so that i can configure developer suite.
Thank You

Forms will use its own Tnsnames.ora file so create alias for it
Run NetCA from
START > PROGRAMS > ORACLE - Oracle HOME name > Configuration and Migration tools > Net Configuration Assistant
and create Alias for Local naming
also make sure the Listener and Database is up and running
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

ORA 01438 error help

Hi: I am using a different vendor's binary client to update in oracle 9.2.0.6. I am having difficulty figuring out which field is it having problem with. The client is trying to do an update. Since it's a binary client, I can't see the actual update command. Following is the error.
==============
Fri Jul 29 16:54:08 2005: E-UNK-000-000: Oracle Error: [ORA-01438: value larger than specified precision allows for this colum] - sqlcode[-1438] Fri Jul 29 16:54:08 2005: E-UNK-000-000: Thread 'StatusTableUpdProcThread': Failed to send batch to Oracle database, due to an unknown error. Aborting the operation.
==============
Any suggestions?
Thanks
Ravi

http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96524/c18trigs.htm#8287
http://asktom.oracle.com/pls/ask/f?p=4950:8:6132787188731396225::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:871003242230
Its a type of trigger that will be invoked by Oracle whenever you establish a new connection to the database. Within the body of this trigger, you could EXECUTE IMMEDIATE sql_trace to TRUE to enable trace for that session.

ORA-00054 error help

SQL> drop table worker_hourly
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
create table worker_hourly
( wrk_id       number(3),
wrk_perhr    number(5,2) NOT NULL,
wrk_otrate   number(3,2),
    primary key (wrk_id),
    constraint workerexist foreign key (wrk_id)
        references worker_super(wrk_id),
    constraint validot check (wrk_otrate < 2.5))
insert into worker_hourly values (333,19.75,NULL)
insert into worker_hourly values (444,15.45,1.5)
/im trying to drop this table and start it up again but its showing up that error, how can i fix it, i've never encountered it before

Either you're not giving the full picture here, or you missed:
(issued from the session that has an outstanding transaction on your table) So:
-Are you capable of indentifying sessions that lock 'your' table? (Any tool available?)
-Do you have a DBA around you can ask?
-Database version?
-acces to datadictionary views like V$LOCK amnd V$LOCKED_OBJECT
-is this a development or a production problem? (I think it's a development problem)
any other suggestions???Give the full picture here, instead of letting us 'fire guesses at you'.
That's like walking down 'Cumbersome Avenue'.

ORA-06550 error help

Hi Everyone,
I am brand new to APEX. I have created an application and it ran fine until I got this error:
ORA-06550: line 1, column 642: PL/SQL: ORA-00917: missing comma ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Will you please point me in the direction as to how I can resolve this error? Thank you.

alter table tableName drop constraint constraintName ;
You cannot drop an index being used to enforce uniqueness. You must drop the constraint - which will also drop the index. You also cannot drop a unique constraint being used as a reference of a foreign key. Adding the keyword CASCADE will allow you to get around that, but it will destroy the FK references.
alter table tableName drop constraint constraintName CASCADE ;

ORA-12505 error help needed

I have 10g on my laptop and tyring to connect to my local db on Laptop via TOAD and gives me error ORA-12505.
here is my TNSNAMES.ORA file:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
EZAUDIT.2020LLC.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2020-5056)(PORT = 1521))
(CONNECT_DATA =
(SID = EZAUDIT)
here is my LISTENER.ORA file:
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2020-5056)(PORT = 1521))
"2020-5056" is my hostname of laptop.
"EZAUDIT" is my SID name, which is the local DB name.
Don't know what's going on. It was working fine for last 2 months, all of a sudden last 3-4 days i am having this issue. My Listener name is "LISTENER"
If I change the SID = EZAUDIT to SERVICEf_NAME = EZAUDIT in my TNSNAMES.ORA file then the error I get is ORA-12514. Don't know what the issue. Please let me know ASAP, have to finish the project by next week.
APPRCIATE your hlp.
THANKS,
Kas

result of the lsnrctl services:
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-JUL-2006 12:27
:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=2020-5056)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
SQLNET.ORA file:
# sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Thanks,
Kas

Hi plz help me out Ora-2097,ora-00439 error

hi plz help me out .i'm getting this error in alert log file
ora-2097 :parameter cannot be modified because specified valued is invalid
ora-00439: feature not enabled: database resource manager

Do you know what parameter may have changed?
The error indicates something about the database resource manager so that may be a clue.
If you have a backup of the init.ora file now would be the time to pull it out.
If you really get stuck comment out all parameters except what you think you really need and then add them in one by one until you find the culprit.

ORA-01458 error while using Pro*C to invoke PL/SQL procedure, pls help

I am using Pro*C (Oracle 10g on Itanium platform) to invoke PL/SQL procedure to read RAW data from database, but always encoutered ORA-01458 error message.
Here is the snippet of Pro*C code:
typedef struct dataSegment
     unsigned short     len;
     unsigned char     data[SIZE_DATA_SEG];
} msg_data_seg;
EXEC SQL TYPE msg_data_seg IS VARRAW(SIZE_DATA_SEG);
     EXEC SQL BEGIN DECLARE SECTION;
          unsigned short qID;
          int rMode;
          unsigned long rawMsgID;
          unsigned long msgID;
          unsigned short msgType;
          unsigned short msgPriority;
          char recvTime[SIZE_TIME_STRING];
          char schedTime[SIZE_TIME_STRING];
          msg_data_seg dataSeg;
          msg_data_seg dataSeg1;
          msg_data_seg dataSeg2;
          short     indSeg;
          short     indSeg1;
          short     indSeg2;
     EXEC SQL END DECLARE SECTION;
     qID = q_id;
     rMode = (int)mode;
     EXEC SQL EXECUTE
          BEGIN
               SUMsg.read_msg (:qID, :rMode, :rawMsgID, :msgID, :msgType, :msgPriority, :recvTime,
                    :schedTime, :dataSeg:indSeg, :dataSeg1:indSeg1, :dataSeg2:indSeg2);
          END;
     END-EXEC;
     // Check PL/SQL execute result, different from SQL
     // Only 'sqlcode' and 'sqlerrm' are always set
     if (sqlca.sqlcode != 0)
          if (sqlca.sqlcode == ERR_QUEUE_EMPTY)          // Queue empty
               throw q_eoq ();
          char msg[513];                                        // Other errors
          size_t msg_len;
          msg_len = sqlca.sqlerrm.sqlerrml;
          strncpy (msg, sqlca.sqlerrm.sqlerrmc, msg_len);
          msg[msg_len] = '\0';
          throw db_error (string(msg), sqlca.sqlcode);
and here is the PL/SQL which is invoked:
SUBTYPE VarChar14 IS VARCHAR2(14);
PROCEDURE read_msg (
     qID          IN     sumsg_queue_def.q_id%TYPE,
     rMode          IN     INTEGER,
     raw_msgID     OUT     sumsg_msg_data.raw_msg_id%TYPE,
     msgID          OUT sumsg_msg_data.msg_id%TYPE,
     msgType          OUT sumsg_msg_data.type%TYPE,
     msgPrior     OUT sumsg_msg_data.priority%TYPE,
     msgRecv          OUT VarChar14,
     msgSched     OUT VarChar14,
     msgData          OUT sumsg_msg_data.msg_data%TYPE,
     msgData1     OUT sumsg_msg_data.msg_data1%TYPE,
     msgData2     OUT sumsg_msg_data.msg_data2%TYPE
) IS
BEGIN
     IF rMode = 0 THEN
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY sched_time, raw_msg_id)
               WHERE ROWNUM = 1;
     ELSIF rMode = 1 THEN
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY recv_time, raw_msg_id)
               WHERE ROWNUM = 1;
     ELSE
          SELECT raw_msg_id, msg_id, type, priority, TO_CHAR(recv_time, 'YYYYMMDDHH24MISS'),
               TO_CHAR(sched_time, 'YYYYMMDDHH24MISS'), msg_data, msg_data1, msg_data2
               INTO raw_msgID, msgID, msgType, msgPrior, msgRecv, msgSched, msgData, msgData1, msgData2
               FROM (SELECT * FROM sumsg_msg_data WHERE q_id = qID AND status = 0 ORDER BY priority, raw_msg_id)
               WHERE ROWNUM = 1;
     END IF;
     UPDATE sumsg_msg_data SET status = 1 WHERE raw_msg_id = raw_msgID;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
          raise_application_error (-20102, 'Queue empty');
END read_msg;
where sumsg_msg_data.msg_data%TYPE, sumsg_msg_data.msg_data1%TYPE and sumsg_msg_data.msg_data2%TYPE are all defined as RAW(2000). When I test the PL/SQL code seperately, everything is ok, but if I use the Pro*C code to read, the ORA-01458 always happen, unless I change the SIZE_DATA_SEG value to 4000, then it passes, and the result read out also seems ok, either the bigger or smaller value will encounter ORA-01458.
I think the problem should happen between the mapping from internal datatype to external VARRAW type, but cannot understand why 4000 bytes buffer will be ok, is it related to some NLS_LANG settings, anyone can help me to resolve this problme, thanks a lot!

It seems that I found the way to avoid this error. Now each time before I read RAW(2000) data from database, i initialize the VARRAW.len first, set its value to SIZE_DATA_SEG, i.e., the outside buffer size, then the error disappear.
Oracle seems to need this information to handle its data mapping, but why output variable also needs this initialization, cannot precompiler get this from the definition of VARRAW structure?
Anyone have some suggestion?

ORA 12170 : Connection timeout error : Help needed

Hi,
The scenario is as follows: I have Oracle 11g R2 installed on a Windows Server 2008 (32-bit) server. The database SID is 'PGMS'. I am accessing (or want to access remotely) the Oracle database from the Visual Studio 2008 development environment (client environment) running on a Windows XP (SP3) platform. I have already installed the ODAC (Ver. 11.2.0.2.1) package for the Visual Studio environment.
I have created a sample Windows Forms application that uses the Oracle data access components. The sample schema HR in the Oracle database has already been unlocked. This is the schema that I am using in the application.
The issue that I am facing is that when I am adding the data connection in the Visual Studio environment; 'Test Connection' functionality returns the following error: ORA-12170 ... Connection timed out.
I have checked the TNSNAMES.ORA file, and everything is as is mentioned in the Oracle documentation. It is as follows:
PGMS=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.161)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PGMS)
Kindly request the community to help me out in overcoming the error and in making the connection successfully. We have a System administrator but not a database administrator. The Oracle installation has been done by me.
Thanks,
Renj
----------

Sunny, it's as follows:
(1) SQLNET.ORA file contents are as follows:
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
(2) LISTENER.ORA file content are as follows:
# listener.ora Network Configuration File: C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.161)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\Administrator
Edited by: Renjith2 on May 9, 2011 3:17 PM
Edited by: Renjith2 on May 9, 2011 3:22 PM

ORA-01078 & LRM-00109 error help

I have installed Oracle 11g x86_64 on to my laptop (OS - Fedora 13). On installing when I tried using the command "startup", it showed me the below error.
$ sqlplus / as sysdba
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/home/kritu/app/kritu/product/11.2.0/dbhome_1/dbs/initorcl.ora'
***NOTE*** But the location doesn't have "initorcl.ora", but instead has got only "init.ora".
Need support from anyone who can help me out in finding the solution to the problem. Thanks in advance.

Hi;
please check below notes:
Database Startup Fails With Errors ORA-01078 And ORA-27046 Or Just ORA-01078 [ID 405847.1]
LRM-00109 and ORA-01078 when Using DBCA after Modifying Creation Script Destination [ID 226709.1]
Startup of an Oracle 9i, 10g, 11g Instance using SPFile or Init.ora Parameter File [ID 162491.1]
Regard
Helios

ORA-12170 Error. Help Required.

Today i installed Oracle 10g client in my system. It was installed on top of Oracle 9i client. After installation a new directory named product was created inside the Oracle folder.
I copied the tnsnames.ora and sqlnet.ora files from C:\oracle\ora90\network\ADMIN to C:\oracle\product\10.1.0\Client_1\NETWORK\ADMIN.
Both the versions of Oracle are loaded inside the same folder.
After all these steps when i tried to log in into sql* plus i got the error
ORA-12170 : TNS: Connect timed out occure.
I tried changing the value of parameter sqlnet.inbound_connect_timeout from 3 to 30. But it didnt work.
Kindly help me out.

duplicate thread
ORA-12170

Urgent help please : ORA-12535: TNS:operation timed out

Hi,
We have 3 jobs scheduled at 6am accesing the same procedure.
2 jobs are succesful when one job is failing with this error always for more than 3 weeks at same time
ORA-12535: TNS:operation timed out
The same job is executed fine at the other times.
Can this be a failure due to a job conflict.
2 jobs which pass are purging.
The job which is failing is a select statement
Please help us

there is no sqlnet.log in the server the error came
But there is sqlnet.ora from the other opponent server where
Fatal NI connect error 12535, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(Host=equinox-ia.nat.bt.com)(Port=1541))(CONNECT_DATA=(SID=iap)(CID=(PROGRAM=oracle)(HOST=dygkr01)(USER=webman))))
VERSION INFORMATION:
     TNS for HPUX: Version 9.2.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
     TCP/IP NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
Time: 28-JAN-2009 15:29:30
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 238
nt OS err code: 0
Fatal NI connect error 12535, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(Host=equinox-ia.nat.bt.com)(Port=1541))(CONNECT_DATA=(SID=iap)(CID=(PROGRAM=oracle)(HOST=dygkr01)(USER=webman))))
VERSION INFORMATION:
     TNS for HPUX: Version 9.2.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
     TCP/IP NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
Time: 28-JAN-2009 15:30:46
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 238
nt OS err code: 0
nt secondary err code: 238
nt OS err code: 0
nt secondary err code: 238
nt OS err code: 0
nt secondary err code: 238
nt OS err code: 0
DBTIDY will cleanup log in 1 days from 28/01/09
Fatal NI connect error 12535, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(Host=equinox-ia.nat.bt.com)(Port=1541))(CONNECT_DATA=(SID=iap)(CID=(PROGRAM=oracle)(HOST=dygkr01)(USER=webman))))
VERSION INFORMATION:
     TNS for HPUX: Version 9.2.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
     TCP/IP NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
Time: 29-JAN-2009 09:05:39
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 238
nt OS err code: 0
Fatal NI connect error 12535, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(Host=equinox-ia.nat.bt.com)(Port=1541))(CONNECT_DATA=(SID=iap)(CID=(PROGRAM=oracle)(HOST=dygkr01)(USER=webman))))
VERSION INFORMATION:
     TNS for HPUX: Version 9.2.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
     TCP/IP NT Protocol Adapter for HPUX: Version 9.2.0.7.0 - Production
Time: 29-JAN-2009 09:06:55
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 238
nt OS err code: 0

Help with ORA 14400 error while inserting data

Hi all,
i am facing an ora 14400 error in the following scenario , please help.
i have created a table using the syntax:
CREATE TABLE temp_table
GRPKEY NUMBER(20, 0) NOT NULL,
UKEY NUMBER(10, 0),
ANUM VARCHAR2(250 BYTE),
APC VARCHAR2(2 BYTE),
SID VARCHAR2(65 BYTE),
RDATETIME VARCHAR2(19 BYTE),
CKEY NUMBER(20, 0),
AVER VARCHAR2(25 BYTE),
CVER VARCHAR2(250 BYTE),
TNAME VARCHAR2(50 BYTE),
SCODE VARCHAR2(30 BYTE),
PTYPE VARCHAR2(50 BYTE),
FILENUMB NUMBER(10, 0),
LINENUMB NUMBER(10, 0),
ENTRY_CREATEDDATE DATE
, CONSTRAINT temp_table_PK PRIMARY KEY (GRPKEY))
PARTITION BY RANGE(ENTRY_CREATEDDATE)
(PARTITION P0 VALUES LESS THAN(TO_DATE(' 2009-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
when i try to insert data using :
insert into temp_table values
(1,null,null,null,null,null,null,null,null,null,null,null,null,null,'01-NOV-2010');
i get the following error output:
Error report:
SQL Error: ORA-14400: inserted partition key does not map to any partition
14400. 00000 - "inserted partition key does not map to any partition"
*Cause: An attempt was made to insert a record into, a Range or Composite
Range object, with a concatenated partition key that is beyond
the concatenated partition bound list of the last partition -OR-
An attempt was made to insert a record into a List object with
a partition key that did not match the literal values specified
for any of the partitions.
*Action: Do not insert the key. Or, add a partition capable of accepting
the key, Or add values matching the key to a partition specification

Hi Chaitanya,
Change your table script to
CREATE TABLE temp_table
GRPKEY NUMBER(20, 0) NOT NULL,
UKEY NUMBER(10, 0),
ANUM VARCHAR2(250 BYTE),
APC VARCHAR2(2 BYTE),
SID VARCHAR2(65 BYTE),
RDATETIME VARCHAR2(19 BYTE),
CKEY NUMBER(20, 0),
AVER VARCHAR2(25 BYTE),
CVER VARCHAR2(250 BYTE),
TNAME VARCHAR2(50 BYTE),
SCODE VARCHAR2(30 BYTE),
PTYPE VARCHAR2(50 BYTE),
FILENUMB NUMBER(10, 0),
LINENUMB NUMBER(10, 0),
ENTRY_CREATEDDATE DATE
, CONSTRAINT temp_table_PK PRIMARY KEY (GRPKEY))
PARTITION BY RANGE(ENTRY_CREATEDDATE)
(PARTITION P0 VALUES LESS THAN(TO_DATE(' 2009-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')),
PARTITION P1 VALUES LESS THAN(MAXVALUE)
insert into temp_table values
(1,null,null,null,null,null,null,null,null,null,null,null,null,null,'01-NOV-2010');
1 row insertedor refer question regarding "Date Partitioning a table"
*009*
Edited by: 009 on Nov 3, 2010 11:29 PM

"ORA-12535:TNS:operation timed out" error

hi,
I want to connect to my oracle server.If I try to connect my client means"ORA-12535:TNS:operation timed out" error is shown.What should i do to the rectify this problem.Pls give me a solution.
Thanks in advance.
-reg
Lakshman.

We are using wiondows XP and oracle 8i.
I am able to ping the host where the database resides.
this problem occurs only when we try to connect this server form the client.I able to connect other servers without any problem.
I able to establish local connections.
I am trying tnsping database service.
client and the server are in same LAN only.
Pls give me a solution.
Thanks in advance.
-regs,
Lakshman.

Ora-08102 - error help me out

Similar Messages

Maybe you are looking for