Ora -20001 When moving application from development to production

Hi,
I am currently trying to get this application to successfully to update but i am receiving the below error message.
The action I am performing is trying to update a record via a save button.
This issues an SQL_UPDATE to Automatic row processing.
ORA-20001: Error in DML: p_rowid=5718074, p_alt_rowid=PERSONAL_ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "F6632C5E819349C1307E25A54BBD2F93" application checksum = "0"
This is not happening on the development application or when I access the application via the admin login. It is only when I use the following url:
http://<server>:<port>/pls/htlmdb/f?p=101 I get the error.
Both versions of APEX are 2.2.1.00.04 and using IE 6.0
I have checked various entries in the forum but they do not fully meet the scenario I am getting,
Any help will be greatly appreciated.
Many thanks
Ty

oops wrong forum
Message was edited by:
user522107

Similar Messages

SSIS package fails because of excel connection manager when deploying package from development to production

Hello,
When I move the package from development to production package fails due to excel connection manager.
Error message---
Message
Executed as user: Answers\Administrator. ...lt: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50     Code: 0xC0202009     Source: CPRO_Prod_to_XLS_Worksheet_Basic_EX
Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE
DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50     Code: 0xC0202009     Source: CPRO_Prod_to_XLS_Worksheet_Basic_EX
Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE
DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50     Code: 0xC0202009     Source... The package execution
fa... The step failed.
Any help would be appreciated.

Hi Vinay,
As Visakh mentioned, the issue usually occurs because the package runs in 64-bit runtime, however, the Excel driver is 32-bit. According to your another thread, it seems that you use SSIS 2005, right? In SSIS 2005, there is no “use 32 bit runtime” option
for the package executions of a SSIS package job step. In this condition, you have two choices:
Install the 64-bit Microsoft ACE OLE DB 12.0 Provider on the production server. Here is the download link (AccessDatabaseEngine_x64.exe):
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Create a CmdExec type job step instead of SSIS Package job step, so that we can call 32-bit DTExec.exe to execute the package within command line. For more information, please see:
http://support.microsoft.com/kb/934653/en-us
Regards,
Mike Yin
TechNet Community Support

Moving Planning application from development to production

Hello All,
Pretty sure this has been answered heaps of times but here goes...
I have dev and prod enviroments of planning and essbase - version 9.3.1
Dev and Prod have own shared services install and also own SQL Servers
EPMA is used in both environments.
I have a planning application in dev with forms, task lists, business rules etc and access assigments.
* What would be the best method to move the application from dev to prod?
* How could I refresh changes I make in dev to prod server eg. changes in EPMA - add new members, changes to forms and business rules?
Appreciate your advice.
Regards
Dinesh

Hi,
Try with this post to start with - Migration of Hyperion Planning Application
Version 9.3.1 EPMA migration on different shared services you would have to use the EPMA file generator to export to ads, then import the ads in the targe env.
Business rules export to XML through EAS, import on target (may have to update the XML because server names will be hardcoded)
Cheers
John
http://john-goodwin.blogspot.com/

Moving Universe from Development to Production

Hello Gurus,
I am working in XI R3.1.
I have modified an existing universe in designer. what are the things that I have to take care of before i export it to Production. In our company not using Import Wizard to move the universe from dev to production. we are moving the .unv files and reports to production using the manual method. i.e save the .unv file in a shared network and open it in production and save the universe.
Below are the steps that I am following. Please let me know If I am wrong.
1. Imported and modified the universe according to the requirements.
2. checked the integrity check and cardinality. there were no errors.
3. saved the universe and checked the radio button "Save for all users"
4. changed the connection to SHARED connection.
5. exported the universe to repository.
copied the .unv file from the USERDOCS where all the .unv files are stored to a shared network
6. opened the .unv file in production environment. changed the connection to secured and saved the universe and checked the radio button "Save for all users."
7. Imported the universe to production repository.
Am I following the correct steps. Please shed some light.
Thanks,
Naveen

Hello Naveen,
did you also look at the LifeCycle Manager tool that is available for download to help you to move objects from Dev to QA to PROD ?
thanks
Ingo

Page item values lost when moving application from 3.1.1 to 4.0.2

I have an application that is working fine in version 3.1.1, but when I move it to 4.0.2, I'm having some issues with losing page item values. I have a page (6) with master key fields that are used to set page items on another page (7) when I branch to that page. In 3.1.1 the items in the page I'm going to are defined as 'Hidden and Protected' and in 4.0.2 they are defined as 'Hidden' (don't see a 'hidden and protected type'). When page 7 first displays, I see the values I passed in the session items. When I fill in the displayed items on the form and click to create a record, I get errors that the key values are null (these are the items I set when I branched to this page). When I look in the session items now, the values are missing. Why are the values lost and is there a work around?

Hi there,
In 4.0.2 there is no hidden & protected item but instead you have one select called "value protected" you can select yes or no there.
Edit your item and See the "Source" region of your item, in the "Source used" it should be "current value in session state is null" and in "Source type" should be "static assignment..........".
In the "Default" region the value type should be "static text ......."
see if there is any changes in these properties.
thanks
Tauceef

Migrating application from Development to Production

Good day all,
Our development phase came to an end and now we need to "deploy" our application on the production server (with it's own OID). Note that we're on release 10.1.2.
In my mind we need to do the following:
- Export users/groups using the OID utilities.
- Export database objects schema containing tables, procedures, functions... by creating a dump.
- Export Page groups, db providers using transport sets.
Just to confirm, is that what we need to do? Can anyone give me some details (especially on 1 and 2)?
Thanks is advance!
Jaco

These are the steps in general for performing the deployment.
For details on OID utilities, see
http://download-west.oracle.com/docs/cd/B14099_01/manage.1012/b14082/tools.htm#i1041008
In particular you would use ldapsearch (and outputting the result to a file) or ldifwrite (to directly write to the file) and bulkload (to load the data output from the development oid to production oid) utilities in particular to achieve the migration.
For schema migration of database schema - make sure that the schema components (tables, triggers, other objects) are exported and imported and there are no invalid objects that the database provider depends on before you start the next phase of migration (of portal content).

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Questions on Analyzer Upgrade and Moving Analyzer Reports from Development to Production

Hi,We run Analyzer 5.0.3. We are planning to go to Analyzer 7.2. Did any body go thru this upgrade? If so, what is your opinion and tips that may help. Also, we never had Analyzer development environment. We are planning on having Analyzer development environment. In our installation, all of the Analyzer reports are centrally developed based on user requests. Once we have development and production at the same Analyzer version, if a report is developed in the development system, how can the report be mirateed/moved from development to production system?Thank you for your help,Prasant

Balaji,
Has this been done yet?
Gary
<BLOCKQUOTE>quote:<HR>Originally posted by [email protected]:
We are working on a document using which one should be able to move a portal instance from one database to another. It is still in draft version, once it is finalized we will be putting it on otn.
Thanks and Regards
Balaji<HR></BLOCKQUOTE>
null

ORA-20001 When trying to default page element to sysdate

Hello,
I have a master detail with last updated in the detail that I want to autopopulate based on sysdate.
To do that I have Tabular Form Attributes set to sysdate and default type PL/SQL Expression or function.
The display as is set to "Display as Text(saves state).
I would like to format the date which I do with Column Attributes and then specify the Number Data Format.
When I click add row in the detai part of the pagethe date is displayed as desired however then I try and
apply the changes (save the page) I get ORA-20001: Found invalid date value, please verify date format. (Row 2)
I have tried formatting the date in the PL/SQL expression with TO_DATE(SYSDATE,'DD-MON-YYYY HH24:MI')
with the same result.
If I change the element to Text Field the date is saved correctly however I don't want the user to edit the
feild.
Any suggestions? Using APEX 4.1

I have the same issue.
1. DEFAULT=SYSDATE when using format mask='DD-MON-YYYY HH24:MI:SS' causes the time portion to appear but ORA-20001 when submitting the row.
2. Since the base column datatype is DATE, a simple to_char(SYSDATE,'DD-MON-YYYY HH24:MI:SS') obviously causes ORA-01790: expression must have same datatype as corresponding expression.
3. A to_date(to_char(SYSDATE,'DD-MON-YYYY HH24:MI:SS'),'DD-MON-YYYY HH24:MI:SS') leads to the same error: ORA-20001: Found invalid date value, please verify date format.
Does anyone know the trick?

Error when downloading application from Server

Hi,
I have installed MI Client 7.0 SPS 11 Patch 0 on Symbol Device ;OS Windows Mobile5.0
i have successfully completed first synchronization .
After that i assigned Mobile Component to the device and tried synchronizing.
"Error when downloading application from http://<servername>:50000/meContainerSync/servlet/com.sap.ip.mi.http.MobileComponentServlet?Application=xyz&Type=APPLICATION&Runtime=JSP"
Pl. suggest
Note: In NWA under 'Device Maintenance' -> Mobile component
The state of the aplication is "Deployment Activated"
rgds,
Kiran Joshua
Message was edited by:
Kiran Joshua

Hi ALL,
I resolved it on my own guys !!!
Actually while downloading server url consists of hostname bcoz the hostfile entry in windows/system32/drivers/etc/hosts was only hostname.
i entered FQDN name in the hostfile... It WORKED
Being Saturday and Sunday...i cud not get any help from forums...i was really worried and Guys we need to think on this :-?
rgds,
Kiran Joshua

When moving material from Uml-zone, we -zone etc.

When moving material from UML-zone, We-zone, etc. Can you get the system to generate individual SU#'s.
I have 30 items of XYZ, I want to move all 30 at one time and generate 30 individual SU#'s......Is there a way?

Yes, this is possible and standard
If you post a material document to place the stock into the interum storage type try LT06 and use the document as a refrence, you will need to maintain the LE quantity in your material masters and the system will automaticaly propose the correct number of SU when you click "palletization".
if you do not maintain the LE you can enter the qty as (for example) 60 X 3000EA / 1 x 2500EA (or whatever unit of measure you use)
This is very standard for WM and easy to do once the configuration is in place and you learn the transactions.
LT06-LT12
Edit: if this doesn't fit for your needs please provide more info about the transactions you currently use to put the stock into the WE-zone and how you are currently moving it out

Process of moving TR from Quality to Production

Dear Experts,
we are in a process of moving TR from Quality to Production. While moving we faced transport incositencies like some old requests have been overwritten into the new one and dependant objects were failed during import in PRD. Now production rehearsal client is kind of messed up. what is the right procedure to transport the requests from Quality to Production. (actually we transferred the TR individually based on the list send by the respectivr module owners). Please help me to findout the solution for this issue.
regards,
Yasin.

Hi,
This situation comes every now & then when you don't have any client strategy define in your landscape I'm not blaming you but for your Project Manager and then rest of the team adopt SAP standard practice if you really want things to go well act NOW..!! here is the basic to start:
Ex,
DEV ::
100 => Golden Client
200 => Customizing Client
300 => Test Client
Things to check before importing request in QAS :
1) Always get the request in sequence format ask the owner of the request for the sequence to avoid dependency issues
2) Technical Specification doc - this doc will be prepare by Functional / Developer on what changes are included in TR
QAS::
400 => Quality Client
Things to check before importing request in PRD :
1) User acceptance doc i.e UAT - client / customer will check the functionality if it's on then move this to PRD
2) Get the request in sequence format
3) Approval for production transport
PRD::
500 => Production Client
Thanks,
Saleem

ERROR WHILE MIGRATING SSIS PACKAGE FROM DEVELOPMENT TO PRODUCTION IN EXECUTION

HI,
I have a problem while executing the package after migrating from DEVELOPMENT to PRODUCTION.
We have two SQL database connections DEVMIDDLEWARE and PRODMIDDLEWARE for dev and prod respectively. When we have created package in development we have used DEVMIDDLEWARE and we have credentials in CONFIG file of that package and executed sucessfully. When
we migrated this same package to PRODUCTION when have given credentials of PRODMIDDLEWARE in CONFIG FILE of this package we are getting error as below
"Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic
error. Verify that the correct key is available. End Error Error: 2014-10-28 07:41:44.24     Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node
"DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC0202009     Source: Package Connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware"     Description: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.".
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC020801C     Source: Package Log provider "SSIS log provider for SQL Server"     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method
call failed. COM error object information is available. Source: "Package" error code: 0xC0202009 Description: "SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE
DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.". ". End Error Error: 2014-10-28 07:41:44.98
Code: 0xC0202009     Source: Package Connection manager "AGRDB01.abwr66"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record
is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'CC\epsdbuser'.". End Error Error: 2014-10-28 07:41:44.98     Code:
0xC020801C     Source: Data Flow Task OLE DB Source [1]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "AGRDB01.abwr66"
failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline     Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-10-28 07:41:45.00     Code: 0xC0024107     Source: Data Flow Task
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 07:41:44 Finished: 07:41:45 Elapsed: 0.859 seconds. The package execution failed.
The step failed."
Can anyone help for this error.
Many thanx in Advance

Hi Babloo,
According to the error message, the package may have failed are as follows:
The user account that is used to run the package under SQL Server Agent in PRODUCTION server differs from the original package author.
The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
The package may not run in the following scenarios:
The current user cannot decrypt secrets from the package. This scenario can occur if the current account or the execution account differs from the original package author, and the package's ProtectionLevel property setting does not let the current user
decrypt secrets in the package. In this scenario, we can change the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword, then modify the SQL Server Agent job step command line to include this password.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses. In this scenario, we can create a SQL Server Agent proxy account. This proxy account must use a credential
that lets SQL Server Agent run the job as the account that created the package or as an account that has the required permissions.
References:
SSIS package does not run when called from a SQL Server Agent job step
Run an SSIS Package Under a Different Account
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

OWB propagation from development to production environment

Our department is in need to implement overall security around our production data warehouse.
One issue that seems to bother our management is having only one OWB Designer where developers would have to be responsible enough to use snapshots and export mappings to mdl files. Management would like to have development and production OWB Designer Repository where production designer would always be in sync with what is deployed in prd database. Also prd OWB Designer Repository would be like a source safe so we have to always get a mapping from prd designer move it dev designer and when done propagate changes back to prd designer and then deploy to prd database.
Would this be a good approach?
Any input on how to handle propagation from development to production environment, and if you are aware of "best practices" when it comes to OWB environment is appreciated.
Best Regards,
Vlasta

Hi,
Copy whole catalog and rpd from dev to prob.
If you want to copy specific report go to OracleBIData\web\catalog\samplesales\root\shared\sample+sales(group folder name)
You can copy reports under folders and dashboards in _portal in Sample sales group folder...both file and .atr file.But you may miss security applied on those dashboards.
http://www.rittmanmead.com/2008/04/28/migration-obiee-projects-between-dev-and-prod-environments/
Best practice is to copy whole catalog and rpd (or) Copy shared and system folders and their .atr files from OracleBIData\web\catalog\samplesales\root so that you will not miss security and you will not over ride users folders which may contain some data created by them.
Thanks,
Srikanth

Error while importing the ODI Package from Development to Production Enviroment

Hello Everybody,
Currently I'm face the problem when import ODI models (from Development) to Production environment
And the error show follwing error:
ODI - 23040 Import file "C:/BIAPPS_Package/Models/XyZ.xml" error
please help.

Do the user performing the import have permissions to import models to the production environment? I'd also mention that you would have a better setup if your production environment only held executables such as scenarios, load plans etc. and not development objects. It leads to better change control management and simplifies the migration process from DEV --> PROD

Ora -20001 When moving application from development to production

Similar Messages

Maybe you are looking for