Questions on Analyzer Upgrade and Moving Analyzer Reports from Development to Production

Hi,We run Analyzer 5.0.3. We are planning to go to Analyzer 7.2. Did any body go thru this upgrade? If so, what is your opinion and tips that may help. Also, we never had Analyzer development environment. We are planning on having Analyzer development environment. In our installation, all of the Analyzer reports are centrally developed based on user requests. Once we have development and production at the same Analyzer version, if a report is developed in the development system, how can the report be mirateed/moved from development to production system?Thank you for your help,Prasant

Balaji,
Has this been done yet?
Gary
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
We are working on a document using which one should be able to move a portal instance from one database to another. It is still in draft version, once it is finalized we will be putting it on otn.
Thanks and Regards
Balaji<HR></BLOCKQUOTE>
null

Similar Messages

How to migrate reports from Development QA Production environment

Hello,
we have 3 Oracle Discoverer 10.1.2.3 environments and I would like to know what is the correct way to migrate reports from DEV to QA and to PROD.
I'm researching about this by a couple of days and didn't find anything handy.
The most likely way that I found was to export the entire EUL from one environment to another with the eulapi with a command line like that:
exporting:
eulapi -connect DEVUSER/pass@orcl -eul DEVUSER -export exp_all.eex -all
importing using [ -import_rename_mode refresh ]:
eulapi -connect QA_USER/pass@orcl -eul QA_USER -import exp_all.eex -identifier -import_rename_mode refresh -log imp.log
That would work.
However if the developer delete some object from the DEV environment and then import in the QA environment the deleted object won't be deleted from the QA environment and after some time the QA and PROD environment would be a mess.
Another way that I figured out was to drop the eul from the PROD environment and then import all over. That would solve the problem but It has a lot of risks.
Thanks in Advance,
Jonas Zanon

Hi,
I think the best approach is to export the EUL components (e.g. business areas, folders, hierarchies, workbooks etc) separately from your development environment and hold these in a change management system. You can then import the components into test and prod and know which version of each component you have.
Often when you make a change you will have to export/import several components. For example, if you add a folder you will need to export the folder, any business areas that hold the folder and if the folder is joined to any detail folders then these as well.
We don't have scripts to delete components from production. Very rarely do you need to delete anything from production and generally it is not a good idea because reports will stop working because the references in the reports are missing.
Rod West

Moving Planning application from development to production

Hello All,
Pretty sure this has been answered heaps of times but here goes...
I have dev and prod enviroments of planning and essbase - version 9.3.1
Dev and Prod have own shared services install and also own SQL Servers
EPMA is used in both environments.
I have a planning application in dev with forms, task lists, business rules etc and access assigments.
* What would be the best method to move the application from dev to prod?
* How could I refresh changes I make in dev to prod server eg. changes in EPMA - add new members, changes to forms and business rules?
Appreciate your advice.
Regards
Dinesh

Hi,
Try with this post to start with - Migration of Hyperion Planning Application
Version 9.3.1 EPMA migration on different shared services you would have to use the EPMA file generator to export to ads, then import the ads in the targe env.
Business rules export to XML through EAS, import on target (may have to update the XML because server names will be hardcoded)
Cheers
John
http://john-goodwin.blogspot.com/

VC Reports transport from Development to Production

Hi all,
     How do we transport the VC Reports from Development to Production.
     How to transport the model.
     Do we need to create new System Object.
     please help me. Are there any standard document available.
Thanks & Regards,
kishore.

Hi
After importing the model as Dharmi explained, you might need to change the systems' names in the model to fit the production landscape. For example, if a backend system has an alias AAA in Dev and same system has alias BBB in prod. To do this, simply choose Tools > Manage services...
If the landscapes are compatible, you can transport only the working iView using the portal transport capabilities. Navigate to System Configuration > Transport in the Dev portal, find your iView and add it to a transport package.
Hope this helps,
Shay

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

How Do i Call An xml publissher and a jsper report from ADF pages

Hi All
How Do i Call An xml publissher and a jsper report from ADF pages

I used the above links to create XML's and from there a formatted report of data from the database. I accomplish this by connecting to the database inside the XMLPublisher.java file. I also have my query hard-coded inside the DataTemplate.xml to extract the info from the database. This limits my ability on what the user can accomplish with the system.
Is it possible to run my reports based on an iterator within Jdeveloper, as opposed to having to manually enter the query and connect to the database within the XMLPublisher.java file and the template.xml?
Thanks.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Unable to run a report from developer 10g

Hi, i can´t run a report from developer 10g when i run the report with the web icon appears the message
Thu Jan 07 14:44:29 CST 2010
javax.servlet.jsp.JspException
javax.servlet.jsp.JspException
     at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:470)
     at sif10r4400F202316.jspService(_sif10r4400F202316.java:50)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:575)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:311)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
my report server is up, my servlet is ok too and REPORT_PATH environment is ok.
Regards

Hi, i can´t run a report from developer 10g when i run the report with the web icon appears the message
Thu Jan 07 14:44:29 CST 2010
javax.servlet.jsp.JspException
javax.servlet.jsp.JspException
     at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:470)
     at sif10r4400F202316.jspService(_sif10r4400F202316.java:50)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:575)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:311)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
my report server is up, my servlet is ok too and REPORT_PATH environment is ok.
Regards

Transport user specific layout of standard report from developer server to

Hi ,
I am using user specific layout of standard report in my customizing report for retrieving data from standard report.
i want to transport this user specific layout of standard report from developer server (say client 400 ) to production server ( say client 100 ).
Also i want to copy this layout for all end users ( different user names ) in production server.
I tried to import user specific layout , it is possible only with in the same server ( say developer server , but different clients , say 400 to 450).
please help me to sort out this .
Thanks & regards,
Hari priya

hi sadaram,
Thanks for ur quick reply,
I am using this user specific layout in my zreport for retrieving data from std report. i don't want this layout to be global for all users. i already created same layout in production also , but i want to copy this user specific layout to some of end users
( not all end users) with different user names.
please suggest any solution to solve this issue..
regards,
Hari priya

Question about OS upgrade and AirPort

I'm kind of in a sticky spot. I just bought a new MacBook Pro and AirPort base station and want to go wi-fi at home. I have a G5 desktop, and want to keep it running as a backup system, but don't have an AirPort card installed in it. I'd like to hook it up the base station to my cable modem and tower via USB, but in order to hook it up I have to have at least 10.4 running on my tower and I'm only at 10.3.9. My printer has asked me not to upgrade to Leopard yet, as it doesn't work well with their system (until their ugrade happens...which could be tomorrow and could be months from now). And I can't buy an upgrade to Tiger at this point now that Jaguar is out. Any suggestions?

I ran into a similar problem. I sold my powerbook (with wireless) and bought a used PowerMac (no wireless). So i went to the apple website and bought a refurbished Airport Extreme card for 29 dollars. Installation was a snap and now I'm online. This works under Panther (10.3.X), Tiger (10.4.X) and Leopard (10.5.X).
Here's the link:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nplm=F8 881LL/A
NOTE: This card will NOT work with any G5 newer than the Early 2005 Model. Newer machines have a combined Airport+Bluetooth card that is not user servicable.

Rectangle keeps expanding and moving other report items

Hi there,
I am using SSRS 2010, and I am trying to make an rdl to fit exactly on pre-printed paper so I need report items to occur exactly where they are located.
In the attached image , I have a header and then two rectangles (shown selected) in the body.
What is supposed to occur is products are populated in the table in the first rectangle, and everything in the bottom rectangle is supposed to stay in place regardless of how many products
occur in the top rectangle.
What is happening is that I have aligned the bottom rectangle based on a single product, but any report that contains multiple products is pushing the bottom rectangle downward and out of alignment.
My searching of this forum has shown that:
Items will push or displace each other within the rectangle.
Items will not push or displace items outside the rectangle, because they are not their peers.
Because these two rectangles are separate and not peers, I can't understand why the growth of the table in the top rectangle is pushing the second rectangle downward. I assumed the second rectangle should always stay fixed, and this needs to happen but isn't.
NB: I have made sure that any report items are located within the parent rectangle and are not behind the rectangle.
Any help would be much appreciated thanks.

Hi SynchFX,
In Reporting Services, the size of rectangle will automatically resize as the contained items (table, matrix, image, textbox etc.) grow. In your scenario, it means that when the table size change dynamically (show all the values in the detail row), the first
rectangle will also be resized to adjust to the height of the table. With the expansion of the first rectangle, the second rectangle will automatically move down to free up more space to the first rectangle. Because all the items are displayed one after another
in report. This is by design. And based on my research, I find that we cannot achieve your requirement at the moment which you can see on the link below:
https://connect.microsoft.com/SQLServer/feedback/details/383350/add-can-grow-and-can-shrink-properties-to-rectangle-control
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Moving all reports from Bex to BO

Hello all,
Post Upgrade from SAP BW 3.5 to 7.0. we are moving all the Bex reports to Business objects .....voyager, webi, crystal , xcelcius.
Please advise on the strategy that needs to be used.
If anyone moved their all their reports from BEX to BO, please give inputs.
My chanllege would be performance here.i was asked a question from client if we could in any way enhance the performace of the report on the BO side once the universe is created on BEx query or Infocube....
i worked on BO-BI integration in the past but PERFORMANCE was not an issue there.But this time it is.
Any inputs on my questions above Highly appreciated.

Hello,
this is a very broad question. will try to give some input and pointers to material.
First of all its important to make sure the actual requirements are well understood the the selection of the tools is well understood. None of the tools will solve all requirements and problems.
On the requirements that are typically Bex Analyzer kind of requirements you might want to consider to stay on BEx Analyzer and then move to Pioneer.
take a look here as well:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/webcontent/uuid/f07cce7c-d09f-2c10-9699-af57afd7b3ce [original link is broken];jsessionid=(J2EE3414700)ID1321113450DB01538479839074909234End
On the best practices take a look here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008d15dc-f76c-2b10-968a-fafe5a121129
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0320722-741c-2c10-afab-93b5c0fc7e96
Ingo

Is it possible to wipe out iMac with ML upgrade and THEN reinstall SL from disk, back up with TM?

Iv'e been going round and round with my iMac ever since Genius bar employees "upgraded" me to ML while replacing Seagate HD per the recall. THis is a late 2009 27-inch iMac that came with SL.
What I think might solve this once and for all is to completely wipe out the hard drive and THEN reinstall SL from the disk that was shipped to me by Apple.
Here's what has happened thus far:
1. iMac was working fine, but per emails from Apple, replacing the Seagate HD that came with the computer was advised. Made appt, took it in after backing up to external hard drive.
2. Picked up the iMac first week of August. Found that they had upgraded me to ML.
3. Proceeded to put back contents of backup from July 27 (before the hard drive was replaced, all saved in SL).
4. Immediately after back up was reinstalled, realized that iPhoto contents (ALL of my saved files/photos, movies, etc, both work and personal) are inaccessible. Also, fan will not stop running (and this is true even when there is no user signed in, ie, no CPU-intensive programs running). Programs that worked in SL no longer work with ML (iWeb, etc).
5. Have been in contact with Apple numerous times, and finally got a senior tech to work with me via phone. I had a SL disk borrowed from a friend (the 27-inch was a replacement for original iMac that was defective and never received any install disks with new iMac Jan 2010). Per instructions from Apple tech, backed up iMac, then tried to reinstall with SL disk. When the progress wheel only kept spinning, he said that the disk I was using must be incompatible and I waited for a replacement SL install disk to be mailed to me.
6. Called back when I got the new SL disk, and then we tried it again. When the progress did the same thing, ie just spinning, Apple tech said that I must have a hardware problem and he instructed me to make another appoitment with the Genius bar. I did that and am supposed to take it in tonight.
7. Apple tech said it must be a hardware problem, that the super drive would not read the install disk, BUT, the super drive (actually both of them, one inside the machine, one external super drive purchased separately) has no problems reading audio CDs. It is ONLY the SL reinstall disk.
That, along with the continually running fans that have also been deemed by Apple tech to be bad hardware (which were both fine before the upgrade to ML) make me think that it is the ML software that does not work properly with this late 2009 iMac. It was designed for SL, not ML.
I suspect that if the hard drive on the iMac is completely wiped clean and SL then reinstalled with the disk that was mailed to me, this would put my machine back in order with SL as the OS.
I'd like to try that BEFORE I take this iMac back to the Apple Store. I have the back up from July (before ML was put on as the OS) and that's what I'd like to put back on. I can more easily save jpegs that were savde after ML was put on as the OS than I can save everything (one by one) that was on this iMac from Jan 2010 till July 2013.
Is there anyone who can give me a yes or no, whether this would work or not? Wipe it all out, start fresh with a new SL installation and back up from that July 2013 backup?

Yes it is. That is why you got a set of reinstal disc with your Mac. For just this purpose.
But if you have a 2009 model it might of come with Leopard. But you should still be able to use that reinstall disc or the retain Snow Leopard DVD you used to upgrade to SL to restore your Mac from a Time Machine backup.
First you need to boot the system from either the original reinstall DVD or the retail SL DVD and use Disk Utility to Repartition the drive as One Partition. you MUST do that to get rid of the Mt Lion Recovery HD partition. Once that is done there should be an option to Restaore your Mac from a TM backup. Have the backup drive connected before you start the system from the Reinstall DVD, either of them whichever you chose.

How to seperate Power Pivot Data Model and Power Pivot Report from Single Workbook.

HI Team,
Initially, We have created Power Pivot report in workbook, containing Source Data Model as well.
Now, we want to convert workbook having model as Shared Data Model, and all report needs to be part of single workbook.
I want to implement one of the below solution, but know how to do it.
1. Separate and Export all Power Pivot report sheet into single Excel Workbook such that it will have all report sheets.
2. Use Same Model as it is and delete reports from existing one after export to new excel workbook.
OR
Is there is any other way to avoid re-creation of reports again? I want to use same report but instead of Embedded Excel data source, I want to use shared data Source in excel.

One option is to use one workbook as the data source(model) and other workbooks for the reports. This works in the stand alone Excel and SharePoint versions of Power BI, but not yet in O365 Power BI version.
There is no export functionality. You would have to copy the workbook and update data source references. I have never tried it, but in theory it should work :).
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.
Hi Michael,
Yes your answer is partially correct..thanks for reply, I am working on Power Pivot reports on SharePoint.
However, below issues observed.
1. There is No Export Functionality ( as you told)
2. We can not copy report sheet from workbook1 (which has Data Model) to Workbook2 ( only for report) using Control + C (copy) and Control + V (paste) option.
Or Move Power Pivot Table ..
So, solution can be (as you said, unfortunately I tried it already but dint worked)
1. Copied workbook with New Name - Workbook2.
2. Go to Data -> I tried to change connection setting -> to use shared Data Model -> I could create new Pivot table using shared Data Model
But, Still I could use earlier designed Power Pivot tables as it is, to point to shared data model.
I don't want to re-design entire report. As my project workbook has plenty reports.... :)

OBIEE Cache clear and refresh of reports from DAC

Hi All,
I have an existing process where OBIEE cache clear and Dashboard report refresh is happened from DAC.
But the issue is both do not happen parallely, the both tasks are kept in single text file and they are called from a batch file from DAC. Below is the code
nqcmd -d AnalyticsWeb -u Administrator -p SADMIN -s D:\OracleBI\server\Bin\PurgeAllCache.txt
So I want to make them run parellely so that Cache clear and refresh of reports happen parellely. In order to achieve do I need to create seperate batch files or can I manage by changing the above code.
Please Suggest.

Can you share the code in the file PurgeAllCache.txt
There might be some issue with code, make sure you use ';' for each statement.
or else use 2 files and 2 commands to execute them.
Pls mark if helps

Questions on Analyzer Upgrade and Moving Analyzer Reports from Development to Production

Similar Messages

Maybe you are looking for