ORA-27037: unable to obtain file status

what is the solution of this error
skipping archive log file /u02/proddata/ARCH/1_1150_742566836.dbf; already backe
d up 1 time(s)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 02/24/2011 18:00:52
RMAN-06059: expected archived log not found, lost of archived log compromises re
coverability
ORA-19625: error identifying file /u02/proddata/ARCH/1_1152_742566836.dbf
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3

It appears that an archivelog is missing.
You should perform the following:
CROSSCHECK ARCHIVELOG ALL;
DELETE EXPIRED ARCHIVELOG ALL;

Similar Messages

ORA-27086: unable to lock file over NFS -- but it's NOT Netapp!

My 10.2 database crashed, and when it came back I got the following error:
ORA-00202: control file: '/local/opt/oracle/product/10.2.0/dbs/lkFOOBAR'
ORA-27086: unable to lock file - already in use
Linux-x86_64 Error: 11: Resource temporarily unavailable
This is a classic symptom of a Netapp problem, which likes to hold file locks open on NFS mounts. There is a standard procedure for clearing those locks; see, for instance, document 429912.1 on Metalink.
Unfortunately, my files are mounted on an Isilon, one of Netapp's twisted cousins. I can find no references to "isilon" on Metalink, and we are at a loss how to resolve this.
My sysadmin assures me that "there are no locks on the Isilon". But I know this cannot be the case, because if I do the following:
1. delete the lockfile /local/opt/oracle/product/10.2.0/dbs/lkFOOBAR, and then
2. move my controlfiles aside, and then copy them back into place,
then the database will mount. However, it will not open, because now all the datafiles have locks.
Is there anyone with experience in clearing NFS locks? I know this is more of a SA task than DBA, but I am sure my SA has overlooked something.
Thanks

New information:
As stated above, I moved the controlfiles aside and then copied them back into place, like this:
mv control01.ctl control01-bak.ctl
cp control01-bak.ctl control01.ctlDid that for each controlfile, and then the database mounted.
But, after rebooting the machine, we discovered that all locks were back in place-- it looks like the system is locking the files on boot-up, and not letting them go. The lock is held by PID 1, which is init.
sculkget: lock held by PID: 1This is definitely looking like a major system issue, and not a DBA issue, and hence I have little right to expect assistance in this forum. But nonetheless I lay my situation out here before you all in case someone else recognizes my problem before the server bursts into flames!
The system is CentOS 4.5-- not my choice, but that's the way it is.

Unable to obtain File lock on examplesServer.lok

Hi experts,
Pls help me..I am new to WebLogic..I have good exp on other App servers..
after installation,when i click quickstart ..the console showing this error.. i have done googling on this..but i haven't find proper answer..pls help me
weblogic.management.ManagementException: Unable to obtain File lock on C:\bea\wlserver_10.3\samples\domains\wl_server\servers\examplesServer\tmp\examplesServer.lok
: java.io.FileNotFoundException: C:\bea\wlserver_10.3\samples\domains\wl_server\servers\
examplesServer\tmp\examplesServer.lok (Access is denied)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:1
51)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:5
8)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectory
Service.java:73)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager
.java:459)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServices
Manager.java:164)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
at weblogic.Server.main(Server.java:67)
>
Awaiting reply

First make Sure that you have Read/Write Permission of this file "examplesServer.lok"
ls -lrt
If you already have all the Permissions on this file still if you are facing this issue then....Just Delete the file "examplesServer.lok" from "C:\bea\wlserver_10.3\samples\domains\wl_server\servers\examplesServer\tmp\" location and then restart your Server. As soon as you start your Server It will create a New File like that.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

ORA-27086: unable to lock file - already in use

Hi All,
Can any one having Idea about this Error while Upgrading from 9.2.0.4.0 to 10.2.0.2.0 on AIX 5.2 after software Installation before patch set apply when i try to start the Database im Getting this Error Below
SQL> startup mount
ORACLE instance started.
Total System Global Area 784334848 bytes
Fixed Size 2022384 bytes
Variable Size 550634512 bytes
Database Buffers 229507072 bytes
Redo Buffers 2170880 bytes
ORA-00205: error in identifying control file, check alert log for more info
Alert_LOG
Mon Jul 3 09:17:15 2006
ORA-00202: control file: '/oracle/QAS/sapdata1/cntrl/cntrlQAS.dbf'
ORA-27086: unable to lock file - already in use
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 8
Additional information: 26492
Please Help me..........
Ahmed

check do u have proper permission to access this file?
and also check whether Is this file is access by 9i database or not.if this is the condition then shutdown the database and startup from 10g home.
27086, 00000, "skgfglk: unable to lock file - already in use"
// *Cause: the file is locked by another process, indicating that it is
// currently in use by a database instance.
// *Action: determine which database instance legitimately owns this file.

ORA-27086: unable to lock file - already in use, Help

We have a windows 2003 server running 10.1.02 w/multiple instances. I created a new, fresh database using DBCA. the db created OK, and I can login as sys.
When I try to create a tablespace, I get these errors. Any suggestions, please?
Thanks,
Leor
SQL> CREATE TABLESPACE BGEN_DATA
2 DATAFILE 'BGEN_DATA.ora' SIZE 1000M REUSE
3 AUTOEXTEND ON NEXT 2M MAXSIZE UNLIMITED
4 ;
CREATE TABLESPACE BGEN_DATA
ERROR at line 1:
ORA-01119: error in creating database file 'BGEN_DATA.ora'
ORA-27086: unable to lock file - already in use
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.

We have a windows 2003 server running 10.1.02
w/multiple instances. I created a new, fresh
database using DBCA. the db created OK, and I can
login as sys.
When I try to create a tablespace, I get these
errors. Any suggestions, please?
Thanks,
Leor
SQL> CREATE TABLESPACE BGEN_DATA
2 DATAFILE 'BGEN_DATA.ora' SIZE 1000M REUSE
3 AUTOEXTEND ON NEXT 2M MAXSIZE UNLIMITED
4 ;
EATE TABLESPACE BGEN_DATA
ERROR at line 1:
ORA-01119: error in creating database file
'BGEN_DATA.ora'
ORA-27086: unable to lock file - already in use
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.First of all, you need to give an absolute path to your datafile. Otherwise, it's going to be hard to track where's the file.
Do you have other database instance running on the same server?
PS, don't cross post on many forum.

ORA-27041: unable to open file

Hi,
while opening the DB by giving startup command ,i am getting following error
Errors in file d:\oracle\admin\pdonds\udump\pdonds_ora_4120.trc:
ORA-00206: error in writing (block 1, # blocks 1) of controlfile
ORA-00202: controlfile: 'C:\ORACLE\CONTROLFILE2\CONTROL02.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.
please tell me ,where is the mistake.

Hi..
Check permission on control file.
Do you have a pfile of the database. If , you have remove this controlfile (CONTROL02.CTL) entry from control_files in the pfile,and try to start the database.
If you don't have a pfile, do
sql> startup
--- You will get error.Database will not go to mount stage.
sql> alter system set control_files='location\CONTROL01.CTL','location\CONTROL03.CTL' scope=spfile;
sql> shu immediate;
sql> startup -- This will start the database.
Anand
Edited by: Anand... on Jan 6, 2009 11:20 AM

Online backup failure due to ORA-27086: unable to lock file - already in us

Hi All,
Online backup has failed due to the error
=========================================================
BR0301E SQL error -27086 at location BrInitOraCreate-5, SQL statement:
'/* BRBACKUP AT PROF_CONN */ CREATE PFILE = '/oracle/SID/102_64/dbs/sap.ora' FROM SPFILE = '/oracle/SID/102_64/dbs/spfileSID.o
ra''
ORA-27086: unable to lock file - already in use
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 8
Additional information: 1388548
BR0303E Determination of Oracle version failed
==========================================================
Please suggest.

Check the file permissions on your Oracle_home...
And kill all the processes, which already running for backup..
Regards,
Nick Loy

ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062

Hi,
Version 11203
I am trying to import schema into exadata machine using impdp.
The impdp is failed to open dump file.
Starting "ICCS"."SYS_IMPORT_FULL_01": userid=iccs/******** full=y TABLE_EXISTS_ACTION=APPEND
DIRECTORY=EXP_FOR_EXADATA PARALLEL=4 DUMPFILE=exp_dataONLY_iccs_25062012_%U.dmp LOGFILE=exp_dataONLY_iccs_25062012.log
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "ICCS"."INF_CALL_ERR" failed to load/unload and is being skipped due to error:
ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp" for read
ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-31693: Table data object "ICCS"."CC_AGG3" failed to load/unload and is being skipped due to error:
ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp" for read
ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
. . imported "ICCS"."CUST_S"                         19.78 MB 580379 rows
. . imported "ICCS"."CUST_SUM_CD"                    16.79 MB 843460 rows
ORA-31693: Table data object "ICCS"."BILL_CUST_SALE_TMP_C" failed to load/unload and is being skipped due to error:
ORA-31640: unable to open dump file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp" for read
ORA-19505: failed to identify file "/restore/psdwh/exp_dataONLY_iccs_25062012_02.dmp"
.....I verified that the file is exist in the file system :
[oracle@dm01db01 psdwh]$ ls -l /restore/psdwh/exp_dataONLY_iccs_25062012_04.dmp
-rwxrwxrwx 1 oracle oinstall 701464576 Jun 25 10:36 /restore/psdwh/exp_dataONLY_iccs_25062012_04.dmpI verified that the file has the same permission as oracle user :
dm01db01{oracle} /home/oracle >id
uid=1000(oracle) gid=1001(oinstall) groups=101(fuse),1001(oinstall),1002(dba)I also verified that i have a the right permission on the directory ABOVE :
cd /restore
ls -l
drwxrwxrwx 3 oracle oinstall         9216 Jun 27 19:15 psdwhI veified that the directory exists:
SQL> select * from dba_directories;
OWNER      DIRECTORY_NAME   DIRECTORY_PATH
SYS       EXP_FOR_EXADATA   /restore/psdwhI have read,write permission on the directory to PUBLIC , and as you can see there are some tables which successfully imported:
. . imported "ICCS"."CUST_S"                         19.78 MB 580379 rows
. . imported "ICCS"."CUST_SUM_CD"                    16.79 MB 843460 rowsPlease note that i am getting such an error each time that i am using expdp with PARALLEL and having %U in the dumpfile name .
e.g:
expdp userid=iccs/iccs@psdwh content=data_only EXCLUDE=statistics DIRECTORY=EXP_FOR_EXADATA
PARALLEL=4 DUMPFILE=exp_dataONLY_iccs_25062012_%U.dmp LOGFILE=exp_dataONLY_iccs_25062012.logIf i am exporting without PARALLEL and %U , mean having just one dump file , i have no problem at all to import the file.
Any Advice ?
Thanks

The issue is most likely due to the directory not being accessible from all nodes in the rac. If it works with parallel=1 but not parallel>1 then the other nodes that are being used to import data, and since the file exists, then please check that the disk is accessible from all nodes in the rack.
Dean

ORA-27044: unable to write the header block of file / IBM AIX RISC System/6

We are getting an error like this...
Oracle 11.2.0.2
AIX 5.3
Error:
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1

ORA-09817 IBM AIX RISC System/6000 Error: 89
Oracle 11.2.0.2
AIX 5.3
Related Errors:-
Mon Nov 05 18:33:51 2012
ARC3 started with pid=30, OS id=954622
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_ora_2514960.trc (incident=17053):
ORA-00600: internal error code, arguments: [kccugg_end], [], [], [], [], [], [], [], [], [], [], []
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_m000_2105586.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/clmst02/UAT/oradata/redo/redo03A.log'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1
Cause:-
Your /clmst02/ mount point might be corrupted.
Check:-
fsck /clmst02
The current volume is: /dev/fslv00
File system is currently mounted.
Primary superblock is valid.
fsck: Performing read-only processing does not produce dependable results.
*** Phase 1 - Initial inode scan
*** Phase 2 - Process remaining directories
*** Phase 3 - Process remaining files
*** Phase 4 - Check inode allocation map
File system inode map is corrupt (NOT FIXED)
fsck: 0507-278 Cannot continue.
File system is currently mounted.
fsck: Performing read-only processing does not produce dependable results.
Fix:-
Either you can change the file location to another mount points or shutdown the database and run the fsck on /clmst02 mount point to fix the corrupted one & start the database.
Fix:-
Recreate the affected Redolog files
alter database add logfile group 3 (
'/clmst02/UAT/oradata/redo/redo03A.log',
'/clmst03/UAT/oradata2/redo/redo03B.log',
'/clmst04/UAT/oradata3/redo/redo03C.log') size 50m reuse;

[HELP] ORA-01990 Error opening password file '/home/oracle/OraHome1/dbs/ora

Dear All,
I have changed the PWD file on oracle 9.2.04 under linux redhat advance server 2.1. but when i start to open database by issuing dbstart, i get
ORA-01990: Error opening password file '/home/oracle/OraHome1/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2 : no such file or directory
additional information: 3
How to solve the problems?
thanks and regard
ER

Hai all...
I did it all..
but still I got
ORA-01990: Error opening password file '/home/oracle/OraHome1/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2 : no such file or directory
additional information: 3
Help me...
Thanks
regard
ER

ORA-19505: failed to identify file - RMAN in creating standby DR database.

I got this error when creating standby database at remote target server.
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
Here is what I did:
1.   started the listener and created corresponding tnsnames entry at remote standyb server
2. startup nomount to the standby database at remote server for an empty instance (instance name dxp1p).
3. All rman backups are in the /backup mount point at primary and the mount point is shared on the remote server as nfs.   So, whatever have in the backup we should be able to see and read from the remote as well.
4. Run the following at primary rman:
sql 'alter system archive log current';
backup current controlfile for standby;
sql 'alter system archive log current';
crosscheck backup;
crosscheck archivelog all;
exit
5.   Start the rman command from primary after connected to the standby server, as the primary DB uses ASM and the standby DB uses file system for the database files:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
========================================================================
But I got this error from the rman log:
contents of Memory Script:
   set until scn 12245784375453;
   restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 04-DEC-13
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_20131204_833310136_464"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-00
channel aux1: ORA-19504: failed to create file "/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
Additional information: 1
ORA-19600: input file is control file (/u01/dxp1p/control/control01.ctl)
ORA-19601: output file is control file (/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl)
Finished restore at 04-DEC-13
contents of Memory Script:
   sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/04/2013 19:06:13
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 12/04/2013 19:06:13
RMAN-11003: failure during parse/execution of SQL statement: alter database mount standby database
ORA-00205: error in identifying control file, check alert log for more info
=========================================
Not sure why, can somebody help?   Appreciated!

I used company regular script to login to standby instance as sys user from primary DB RMAN as oracle OS user and sys DB user.   We normally run this way for years.
Like this:
$ORACLE_HOME/bin/rman target=/ auxiliary 'sys/sys0rapr321!'@dxp1p_s11 CMDFILE=${HOME}/dba/scripts/rman_cr_dr.cmd
rman_cr_dr.cmd:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
exit
==========================
Oinstall is a group.   I am not sure to use oinstall as a user?

Getting this error in alert log | ORA-27037:

Tue May 6 11:57:16 2008
SMON: enabling cache recovery
Tue May 6 11:57:17 2008
Successfully onlined Undo Tablespace 1.
Tue May 6 11:57:17 2008
SMON: enabling tx recovery
Tue May 6 11:57:17 2008
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication fou
nd)
Completed: alter database open
Tue May 6 12:07:14 2008
Errors in file /oracle/admin/MLQA/udump/mlqa_ora_18276.trc:
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 4
Tue May 6 12:07:14 2008
Errors in file /oracle/admin/MLQA/udump/mlqa_ora_18275.trc:
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 4
what is the cause of this error and how do i solve it.?
Regards

This is the content of my init.ora file
$ more iniMLQA.ora
iniMLQA.ora: No such file or directory
$ more initMLQA.ora
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=500M
db_file_multiblock_read_count=32
# Cursors and Library Cache
open_cursors=400
# Database Identification
db_domain=""
db_name=MLQA
# Diagnostics and Statistics
background_dump_dest=/oracle/admin/MLQA/bdump
core_dump_dest=/oracle/admin/MLQA/cdump
timed_statistics=TRUE
user_dump_dest=/oracle/admin/MLQA/udump
# File Configuration
control_files=("/data1/oradata/mlqa/control01.ctl", "/data1/oradata/mlqa/control02.ctl", "/data1/oradata/mlqa/control03.
ctl")
# Instance Identification
instance_name=MLQA
# Job Queues
job_queue_processes=10
# MTS
#dispatchers="(PROTOCOL=TCP) (SERVICE=MLQAXDB)"
# Miscellaneous
aq_tm_processes=1
compatible=9.2.0.0.0
# Optimizer
hash_join_enabled=TRUE
query_rewrite_enabled=FALSE
star_transformation_enabled=FALSE
# Pools
java_pool_size=32M
large_pool_size=16777216
shared_pool_size=200M
# Processes and Sessions
processes=150
# Redo Log and Recovery
fast_start_mttr_target=300
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=100M
sort_area_size=524288
max_enabled_roles=50
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_retention=10800
undo_tablespace=UNDOTBS1
What and what am I going to set in the RMAN configure settings;

Create pfile from spfile ORA-27037

This always worked on some other Databases I worked in past. however this Database raise error. Here are the steps on how I did it
Old initSID.ora file located in directory below
cd $ORACLE_HOME/dbs
sqlplus / as sysdba...
SQL> create pfile from spfile ;
create pfile from spfile
ERROR at line 1:
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
Any idea why this does not work?

This is something strange, if the database is using spfile then why there is no value in VALUES column, see below:(like this)
SQL> show parameter pfile;
NAME TYPE VALUE
spfile string ?/dbs/[email protected]
Do you able to see physical file .

Error reading backup piece, unable to open file,

I have 3 bkp file in BACKSET directory, I am trying to duplicate form one system(Windows XP) to another Windows XP.
I get errors as below. Please help.
channel ORA_AUX_DISK_1: reading from backup piece Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP
ORA-19870: error reading backup piece Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP
ORA-19505: failed to identify file "Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
The file Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP does exist in the target database.
Edited by: user10404616 on Mar 31, 2010 7:51 AM

You must copy the backup pieces from SysA to SysB -- to the expected location. This would be the same directory path as on SysA.
See the documentation on the DUPLICATE DATABASE command :
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta028.htm#RCMRF126
If the target and duplicate databases reside on different hosts, then you must do one of the following tasks for duplication to be successful:
Move backups and disk copies from the target host to the duplicate host to the same location as the target host so that the path names are identical
Move backups and disk copies from the target host to the duplicate host to a new location (so that the path names are different), and then CATALOG them.
Make sure that all backups and copies (disk or sbt) on the target host are remotely accessible from the duplicate host. Make sure that the archived redo logs are available in the expected location in the new host.
Hemant K Chitale
http://hemantoracledba.blogspot.com

ORA-27078: unable to determine limit for open files

I installed Oracle XE on my Gengoooraclexe@ghost ~ $ lsnrctl
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2011 16:51:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 25-JUN-2011 10:03:30
Uptime 0 days 6 hr. 48 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ghost.emacs.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
Poraclexe@ghost ~ $ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 25 07:19:58 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> show user
USER is "SYS"
SQL> startup
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -2958340
SQL> startup force
ORA-27078: unable to determine limit for open files
Linux Error: 1: Operation not permitted
Additional information: 1
Additional information: 1
Additional information: -3378372
SQL> startup
ORA-03113: end-of-file on communication channel
SQL> exit
Disconnected

unable to determine limit for open filessee http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABJFAIA
Is that a debian flavored distro?

ORA-27037: unable to obtain file status

Similar Messages

Maybe you are looking for