ORA-27509:IPC error receiving a message in 10.1.0.4 RAC database
Hi Gurus
Please suggest me Instance crashed with the below error,
ORA-27509:IPC error receiving a message .
Regards,
Khan
27509, 00000, "IPC error receiving a message"
// *Cause: This is an operating system/cluster interconnect error.
// *Action: Check the value of errno and contact Oracle Support Services.
Similar Messages
-
ASM instance crash due to error ORA-27506: IPC error connecting to a port
Hi All,
Today the ASM instance goes down.
When i checked the alert log I found the below error.
ORA-27506: IPC error connecting to a port
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1
Please find the environment details.
OS : RHEL-5
DB: 11.1.0.7 2-node RAC
I want to know the root cause of this issue.
Please suggest.
Thanks and Regards,Hi,
Could you please upload cluster alert log and cssd.log?
regards,
Kishore -
ORA-27504: IPC error creating OSD context : Unable to start second node
I have set the DB parameter CLUSTER_INTERCONNECT to point to the Inet addr.
oifcfg getif
bondeth0
172.23.250.128 global public
bondib0 192.168.8.0 global
cluster_interconnect
When I try to restart the DB services, it is throwing below error while starting the second node.
These are set of commands I have executed to change the DB Parameter
alter system set cluster_interconnects = '192.168.10.6' scope=spfile sid='RAC1' ;
alter system set cluster_interconnects = '192.168.10.7' scope=spfile sid='RAC2' ;
alter system set cluster_interconnects = '192.168.10.6' scope=spfile sid='ASM1' ;
alter system set cluster_interconnects = '192.168.10.7' scope=spfile sid='ASM2' ;
On second node
SQL> startup ;
ORA-27504: IPC error creating OSD context
ORA-27300: OS system dependent operation:if_not_found failed with status: 0
ORA-27301: OS failure message: Error 0
ORA-27302: failure occurred at: skgxpvaddr9
ORA-27303: additional information: requested interface 192.168.10.6 not found. Check output from ifconfig command
SQL>
please let me know whether the proceedure I have followed is wrong
ThanksNode 1:
[oracle@prdat137db03 etc]$ /sbin/ifconfig bondib0
bondib0 Link encap:InfiniBand HWaddr 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr:192.168.10.6 Bcast:192.168.11.255 Mask:255.255.252.0
inet6 addr: fe80::221:2800:1ef:bc4f/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:65520 Metric:1
RX packets:32550051 errors:0 dropped:0 overruns:0 frame:0
TX packets:32395961 errors:0 dropped:42 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19382043590 (18.0 GiB) TX bytes:17164065360 (15.9 GiB)
[oracle@prdat137db03 etc]$
Node 2:
[oracle@prdat137db04 ~]$ /sbin/ifconfig bondib0
bondib0 Link encap:InfiniBand HWaddr 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr:192.168.10.7 Bcast:192.168.11.255 Mask:255.255.252.0
inet6 addr: fe80::221:2800:1ef:abdb/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:65520 Metric:1
RX packets:29618287 errors:0 dropped:0 overruns:0 frame:0
TX packets:30769233 errors:0 dropped:12 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:16453595058 (15.3 GiB) TX bytes:18960175021 (17.6 GiB)
[oracle@prdat137db04 ~]$ -
ORA-27504: IPC error creating OSD context
Hi
We have a Linux based ORACLE rac server (version-10.2.0.4.0). Suddenly dbs are went down and while we are trying to up the dbs it will shows the following error
ORA-27504: IPC error creating OSD context
ORA-27300: OS system dependent operation:check if cable failed with status: 0
ORA-27301: OS failure message: Error 0
ORA-27302: failure occurred at: skgxpcini1
ORA-27303: additional information: requested interface eth1 interface not runnin
g set disableinterface_checking = TRUE to disable this check for single instan
ce cluster. Check output from ifcon
Any one have idea about this?
Thanks
AnbuUse this forum to report broken links or general feedback about Oracle documentation. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered.
It seems you are not in the right forum. Despite of this because of the error stack you have a - possibly hardware related - connection problem between the nodes of the cluster. Pay special attention to ORA-27303, I think this message gives you valuable hints. And check the interconnect on hardware level.
Werner -
Can't start first instance...ORA-27504: IPC error creating OSD context
Oracle11gR1 RHEL4 AS - 64bit - 2 node RAC
I am having trouble starting the database from the first node. I can start the second node without any problems. When I go to start the first node I get the following error:
[oracle@vtl-rac1 db_1]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Thu May 1 15:50:50 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-27504: IPC error creating OSD context
HA Resource Target State
ora.VMRACDEV.VMRACDEV1.inst ONLINE OFFLINE
ora.VMRACDEV.VMRACDEV2.inst ONLINE ONLINE on vtl-rac2
ora.VMRACDEV.db ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ASM1.asm ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.LISTENER_VTL-RAC1.lsnr ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.gsd ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ons ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.vip ONLINE ONLINE on vtl-rac1
ora.vtl-rac2.ASM2.asm ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.LISTENER_VTL-RAC2.lsnr ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.gsd ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.ons ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.vip ONLINE ONLINE on vtl-rac2
No alerts are being generated in the alert log. And I have looked at this errror in the docs and it says that it is related to OS/cluster interconnect but those are also fine as indicated in the alert log. I saw some metalink notes but they are specific to other OS's.
Any help would be appreciated.
Thank you.Presuming that no other changes were made to this
configuration and it stopped working , you might want
to attempt these steps :
a) You have already mentioned this but recheck the
alert.log file for this instanceThere is nothing in the alertlog.
to verify if there are any errors reported.
Check the udump / bdump locations for any trace files
which might give
us any clues on where to look further.This is all I found in a trace file:
libskgxpd.so called
libskgxp9.so should reference real implementation
IPC OS error without diagnostic information
Dump of memory from 0x0000007FBFFF8FF8 to 0x0000007FBFFF90D0
7FBFFF8FF0 00000000 20435049 [....IPC ]
7FBFFF9000 74696E69 00000000 00000000 0000002A [init........*...]
7FBFFF9010 BFFF9130 0000007F 5F487518 676B7300 [0........uH_.skg]
7FBFFF9020 69637078 0000696E 696C00CE 676B7362 [xpcini....libskg]
7FBFFF9030 2E647078 63206F73 656C6C61 696C0A64 [xpd.so called.li]
7FBFFF9040 676B7362 2E397078 73206F73 6C756F68 [bskgxp9.so shoul]
7FBFFF9050 65722064 65726566 2065636E 6C616572 [d reference real]
7FBFFF9060 706D6920 656D656C 7461746E 0A6E6F69 [ implementation.]
7FBFFF9070 00000000 00000001 096AD150 00000000 [........P.j.....]
7FBFFF9080 00000001 00000001 5F487518 00000001 [.........uH_....]
7FBFFF9090 BFFFA258 0000007F 00000030 00000000 [X.......0.......]
7FBFFF90A0 000006FA 00000000 00000000 00000000 [................]
7FBFFF90B0 00000000 00000000 00000000 00000000 [................]
7FBFFF90C0 096AD0E0 00000000 00000001 00000041 [..j.........A...]
struct ksxpp * ksxppg_ [0x96c5fb0, 0x2a965ed800) = 0x2a965ed7f8
Does the same problem persist if the problematic Node
is rebooted.- Nope, that didn't change anything either.
d) You might want to strace the Sqlplus startup
process and depending on
where the assert is raised , it might provide
some pointers.- Here is the end of the strace output:
read(9, "\f\0\4\4\0\0P\0\5\4\0\0g\0\6\4\0\0~\0\7\4\0\0\245\0\10\4\0\0\274\0"..., 512) = 512
close(9) = 0
lseek(4, 16384, SEEK_SET) = 16384
read(4, "\f\0\261\2\0\0P\0\264\2\0\0\177\0\265\2\0\0\265\0\266\2\0\0\f\1\275\2\0\0/\1"..., 512) = 512
write(1, "Connected to an idle instance.\n", 31) = 31
write(1, "\n", 1) = 1
mmap(NULL, 143360, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9829b000
munmap(0x2a9829b000, 143360) = 0
access("login.sql", F_OK) = -1 ENOENT (No such file or directory)
mmap(NULL, 143360, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9829b000
munmap(0x2a9829b000, 143360) = 0
access("/opt/app/oracle/product/11.1.0/db_1/sqlplus/admin/glogin.sql", F_OK) = 0
statfs("/opt/app/oracle/product/11.1.0/db_1/sqlplus/admin/glogin.sql", {f_type="EXT2_SUPER_MAGIC", f_bsize=4096, f_blocks=7210695, f_bfree=1791712, f_bavail=1425430, f_files=3662848, f_ffree=3395776, f_fsid={0, 0}, f_namelen=255, f_frsize=4096}) = 0
open("/opt/app/oracle/product/11.1.0/db_1/sqlplus/admin/glogin.sql", O_RDONLY) = 9
brk(0x61f000) = 0x61f000
read(9, "--\n-- Copyright (c) 1988, 2005, "..., 57344) = 342
read(9, "", 57344) = 0
brk(0x611000) = 0x611000
close(9) = 0
write(1, "SQL> ", 5) = 5
fstat(0, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 1), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9829b000
read(0, "startup\n", 1024) = 8
write(10, "\0U\0\0\6\0\0\0\0\0\3\212\6\376\377\377\377\377\377\377\377\0\1\0\0\0\0\0\0\376\377\377"..., 85) = 85
read(11, "\0\33\0\0\6\0\0\0\0\0\10\1\0\0\0\0\0\0\0\0\t\1\0\0\0\0\0", 8208) = 27
write(10, "\0\35\0\0\6\0\0\0\0\0\0030\7\0\0\0\0005\0\0\0\376\377\377\377\377\377\377\377", 29) = 29
read(11, "\0\275\0\0\6\0\0\0\0\0\4\1\0\0\0\0\0\1\0\0\0\0pk\0\0\0\0\0\0\0\0"..., 8208) = 189
write(1, "ORA-27504: IPC error creating OS"..., 42) = 42
write(1, "SQL> ", 5) = 5
read(0, "exit\n", 1024) = 5
write(10, "\0\r\0\0\6\0\0\0\0\0\3\t\10", 13) = 13
read(11, "\0\21\0\0\6\0\0\0\0\0\t\1\0\0\0\0\0", 8208) = 17
lseek(4, 15872, SEEK_SET) = 15872
read(4, "\n\0\243\2\0\0D\0\244\2\0\0_\0\245\2\0\0\206\0\246\2\0\0\277\0\252\2\0\0\371\0"..., 512) = 512
write(1, "Disconnected\n", 13) = 13
write(10, "\0\n\0\0\6\0\0\0\0@", 10) = 10
close(10) = 0
close(11) = 0
close(8) = 0
close(7) = 0
close(5) = 0
close(3) = 0
close(4) = 0
munmap(0x2a97ff1000, 143360) = 0
brk(0x610000) = 0x610000
brk(0x609000) = 0x609000
exit_group(0) = ?
I have Oracle Support stumped on this one too.
Thanks. -
I get randomly
NetStream.Codec.Error Received H264 message without receiving AVCC sequence header first
from Stream.status
and obviously no video and sound.
any clue ?
Thanks -
B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
KenKen,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work. -
I am getting the error in alert log file.
ORA-27508: IPC error sending a message
ORA-27300: OS system dependent operation:IPCSOCK_Send failed with status: 10054
ORA-27301: OS failure message: An existing connection was forcibly closed by the remote host.
ORA-27302: failure occurred at: send_3
Tue Oct 14 07:43:23 2008
Errors in file v:\oracle\oradata\rtgs\pidb\dump\bdump\pidb1_lms1_6704.trc:
ORA-27508: IPC error sending a message
ORA-27300: OS system dependent operation:IPCSOCK_Send failed with status: 10054
ORA-27301: OS failure message: An existing connection was forcibly closed by the remote host.
ORA-27302: failure occurred at: send_3
communication between node1 and node2 disconnects.Search on Metalink as I suggested earlier and you should find a lot of relevant information/bugs/patch information etc.
If your case is different than all listed ones, then you need to raise SR with Oracle support. -
Hi Exports,
I am getting the ORA-00600: internal error code, arguments: [17183], [0x033134908], [], [], [], [], [], []
The temporary tablespace of the database is full and i am trying to do the following steps.
SQL> select * from dba_temp_files;
FILE_NAME FILE_ID TABLESPACE_NAME BYTES Blocks Etat RELATIVE_FNO AUT MAXBYTES MAXBLOCKS INCREMENT_BY
USER_BYTES USER_BLOCKS
G:\ORADATA\TEMP01.DBF 1 TEMP 3.4359E+10 4,194,176 AVAILA 1 YES 3.4360E+10 4194302 80
3.4358E+10 4194048
J:\ORADATA\TIVOLIORTEMPTS.DBF 5 TIVOLIORTEMPTS 104857600 12,800 AVAILA 1 NO 0 0 0
103809024 12672
J:\ORADATA\TEMP_ORISSA_MASTER.TMP 2 TEMP_ORISSA_MASTER 10485760 1,280 AVAILA 1 YES 52428800 6400 128
9437184 1152
J:\ORADATA\TEMP_ORISSA_BENCHMARK.TMP 3 TEMP_ORISSA_BENCHMARK 680525824 83,072 AVAILA 1 YES 1073741824 131072 2
679477248 82944
J:\ORADATA\TEMP_ORISSA_TRANSACTION 4 TEMP_ORISSA_TRANSACTION 104857600 12,800 AVAILA 1 YES 1073741824 131072 2
103809024 12672
5 rows selected.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
5 rows selected.
SQL> CREATE TEMPORARY TABLESPACE MYTEMPFILE
2 TEMPFILE 'G:\ORADATA\TEMP001.dbf'
3 SIZE 1000M AUTOEXTEND ON NEXT 10M MAXSIZE 2000M;
Tablespace created.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE MYTEMPFILE;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 1048576 1047527424
6 rows selected.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 11534336 1037041664
5 rows selected.
SQL> select STATUS,ENABLED,STATUS,BYTES/1024/1024 from v$tempfile;
Etat ENABLED Etat BYTES/1024/1024
OFFLIN READ WRITE OFFLIN 0
ONLINE READ WRITE ONLINE 100
ONLINE READ WRITE ONLINE 10
ONLINE READ WRITE ONLINE 649
ONLINE READ WRITE ONLINE 100
ONLINE READ WRITE ONLINE 1000
6 rows selected.
SQL> desc v$tempfile;
Name Null? Type
FILE# NUMBER
CREATION_CHANGE# NUMBER
CREATION_TIME DATE
TS# NUMBER
RFILE# NUMBER
STATUS VARCHAR2(7)
ENABLED VARCHAR2(10)
BYTES NUMBER
BLOCKS NUMBER
CREATE_BYTES NUMBER
BLOCK_SIZE NUMBER
NAME VARCHAR2(513)
SQL> select file#,STATUS,ENABLED,STATUS,BYTES/1024/1024 from v$tempfile;
FILE# Etat ENABLED Etat BYTES/1024/1024
1 OFFLIN READ WRITE OFFLIN 0
5 ONLINE READ WRITE ONLINE 100
2 ONLINE READ WRITE ONLINE 10
3 ONLINE READ WRITE ONLINE 649
4 ONLINE READ WRITE ONLINE 100
6 ONLINE READ WRITE ONLINE 1000
6 rows selected.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' offline;
Database altered.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> select * from dba_temp_files;
FILE_NAME FILE_ID TABLESPACE_NAME BYTES Blocks Etat RELATIVE_FNO AUT MAXBYTES MAXBLOCKS INCREMENT_BY
USER_BYTES USER_BLOCKS
G:\ORADATA\TEMP01.DBF 1 TEMP AVAILA
J:\ORADATA\TIVOLIORTEMPTS.DBF 5 TIVOLIORTEMPTS 104857600 12,800 AVAILA 1 NO 0 0 0
103809024 12672
J:\ORADATA\TEMP_ORISSA_MASTER.TMP 2 TEMP_ORISSA_MASTER 10485760 1,280 AVAILA 1 YES 52428800 6400 128
9437184 1152
J:\ORADATA\TEMP_ORISSA_BENCHMARK.TMP 3 TEMP_ORISSA_BENCHMARK 680525824 83,072 AVAILA 1 YES 1073741824 131072 2
679477248 82944
J:\ORADATA\TEMP_ORISSA_TRANSACTION 4 TEMP_ORISSA_TRANSACTION 104857600 12,800 AVAILA 1 YES 1073741824 131072 2
103809024 12672
G:\ORADATA\TEMP001.DBF 6 MYTEMPFILE 1048576000 128,000 AVAILA 1 YES 2097152000 256000 1280
1047527424 127872
6 rows selected.
SQL> select file#,STATUS,ENABLED,STATUS,BYTES/1024/1024 from v$tempfile;
FILE# Etat ENABLED Etat BYTES/1024/1024
1 OFFLIN READ WRITE OFFLIN 0
5 ONLINE READ WRITE ONLINE 100
2 ONLINE READ WRITE ONLINE 10
3 ONLINE READ WRITE ONLINE 649
4 ONLINE READ WRITE ONLINE 100
6 ONLINE READ WRITE ONLINE 1000
6 rows selected.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE temp;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 28311552 1020264448
5 rows selected.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' online;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 28311552 1020264448
6 rows selected.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE MYTEMPFILE;
Database altered.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' offline;
Database altered.
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES;
ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' DROP INCLUDING DATAFILES
ERROR at line 1:
ORA-25152: TEMPFILE cannot be dropped at this time
SQL> ALTER DATABASE TEMPFILE 'G:\ORADATA\TEMP01.DBF' online;
Database altered.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE temp;
Database altered.
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP 3.4359E+10 0
TEMP_ORISSA_MASTER 4194304 6291456
TEMP_ORISSA_BENCHMARK 680525824 0
TEMP_ORISSA_TRANSACTION 37748736 67108864
TIVOLIORTEMPTS 1048576 103809024
MYTEMPFILE 32505856 1016070144
6 rows selected.
SQL> exit
I am not able to drop the Temp file as it is used by some users.
When i checked my Alert Log then i am getting the ora-600 error....
When i check metalink for this argument i found that its a bug in 91 &10gR2
Please suggest some solution of this problem.
Is it a serious issue of database.Robert Geier wrote:
If you kill the sessions using the tempfile, or restart the database you may be able to drop it. Or you could try to shrink the tempfile instead of drop.
Not sure why you are doing that though ? If the temp tablespace is full, check what is using the space, or add another tempfile to the tablespace.No I am not killing the sessions... But i just checked using following query that some users are using the temp Tablespace at that time. But i did not kill any session.
select 'alter system kill session '''||a.sid||','||a.serial#||''' immediate;'
from
v$session a,
v$sort_usage b,
v$process c,
v$parameter d
where
d.name = 'db_block_size'
and
a.saddr = b.session_addr
and
a.paddr = c.addr
and
b.tablespace='TEMP'
and
a.status='ACTIVE'
order by
b.tablespace,
b.segfile#,
b.segblk#,
b.blocks; -
Hi,
*I got error ORA-00600: internal error code, arguments: [ktsxtffs2], [284], [1398030667], [], [],*
at starting up of database, database is up and running no issues till then
I found MOS doc 786443.1...
As mentioned in the Doc to drop and create temporary tablespaces...
i added another temp tablespace and make it default temporary tablespace and tried to delete the old one it returns the error:ORA-1013 signalled during: drop tablespace temp1..
i have two tempfiles temp1 and temp2 under tablespace group temp
please advise how to delete the tablespace group
thanks,
AligHi Alig;
ORA-00600 is internal error which means if error retry then you take support from oracle, Pelase check Note:Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Put your version and your error and look up error, it will bring you some document, check them and if they are not useful for your i strongly suggest log a Sr for your issue
Regard
Helios -
While creating RAC database on IBM AIX 5.3 following errors occur.
Hi,
I am creating a Oracle database on following configuration IBM AIX 5.3 box:
OS: IBM AIX 5.3
DB: Fresh installed Oracle 9.2.0.1 upgraded to Oracle 9.2.0.7 (Patch)
While creating a RAC database on the above server i got following errors:
ORA:00603 : ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
ORA-27504 : IPC error 380 OSD context
ORA-27300 : OS system dependent operation : if_not_found failed with status:0
ORA-27301 : OS failure mesage: error 0
ORA-27302 : failure occured at:skgxpbaddr9
Licence high water mark = 0
Can any 1 help me out.Are the above error related to OS or something is wrong with the OS cluster / RAC. I tried creating single instance database on either of the server which are in cluster, no success.
Also 1 more thing i would like to add is that iam able to create single instance database on server which are not in cluster.
Any help regarding the above error is appreciated.This is a bug (for patchsets 9.2.0.6 and higher), see metalink:
UNABLE TO START RAC INSTANCE AFTER APPLYING PATCHSET 9.2.0.6 ON AIX
Note:300218.1
Werner -
ORA-19511: Error received from media manager layer, error text:
Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
WahidHi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid -
I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?
Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen -
I receive this message: Error code: ssl_error_protocol_version_alert
firfox will not loadMy apologies for not supplying the rest of the information required. I will go through the information provided in the link. Thank you.
I am using Windows 7 Home Premium.
The previous version of Acrobat is showing 8 from CS3 Design Premium.
I did not get a chance to try another DVD drive or load onto another machine to test the disk. I will also have to note all of the errors from the reinstall failure.
I do see the original install folder created - C:\Program Files (x86)\Adobe\Acrobat 8.0
Jeff -
I can no longer attach files to my outgoing Hotmail emails. I only receive a message where I would expect the Upload to appear that an error has occurred.
I am using a MacBook Pro with Retina, 2 Ghz Intel Core i7, OS X 10.9.4
I have no difficulty attaching files to the outgoing Hotmails on the same account using my iPhone.
Help appreciated.Thanks for this - not an immediate solution I fear but will keep unplugging stuff and restarting stuff.
To try and be clearer about the problem - I have in the last managed to send attachments successfully. Now I can send and receive plain email messages but get the error message when I try to attach an existing file to an email - not just a particular file but it would appear all files are being treated in the same way.
An experiment to send a mail to which an attachment has failed to upload got the following message alongside the SEND button
Files with errors will be removed from the email and not sent.
- but the mail alone was sent and received successfully. Thanks for any pointers you can give me.
Maybe you are looking for
-
Interest calculation for vendors
Hello gurus, In interest calculation for vendors, In interest on arrears calculation(vendors) t-code (obv9) Here wht we have to configure the steps, like Infirst step i had given,, Account symbol Currency
-
this is what I'm getting driving me NUTS This page delivered to you by a web browser extension Click here to learn more.
-
I heard Adobe will release a new version of Flash designed for animators? Is this true? Here in the studio we still use Flash CS3. In CS4 there are files that take 30 minutes to open. We had some issues with CS5 to when opening files created in CS3,
-
IPod Classic Pauses at 9 seconds on all songs NOT originally from iTunes?
Recently any song I play that was not originally purchased via iTunes (stuff I had on my old PC for years that have always worked fine) pauses at 11 seconds. All of the songs I have purchased through iTunes and some of the songs I imported from CDs w
-
Macbook pro, ibook, or macbook?
which is the better laptop; an ibook g4, a macbook , or the macbook pro?