ORA-36695: The length of GID dimension status is 2. The length of LEVEL dim

I am using AWM 11.2.2.0.A.
I am compiling one of the dimension I created. The following error message i got:
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-00703: error executing OLAP DML command "(GROUPINGID OLAP_WH.OLAP_WH!BITEM_PARENTREL INTO OLAP_WH.OLAP_WH!BITEM_GID USING OLAP_WH.OLAP_WH!BITEM_LEVELREL GID : ORA-36695: The length of GID dimension status is 2. The length of LEVEL dimension status is 3.
)", Generic at TxsOqAWManager::executeCommand
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$2.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Which version of the server are you using? Is that 11.2.0.2 as well?
This error could be due to a number of things. If you have made a number of edits to the dimension (e.g adding and removing levels and hierarchies), then the metadata in the AW may be a little confused. This was especially true for 11.1.0.7, but there could still be bugs lurking in 11.2. One thing you could try is to save the dimension to an XML template, then delete it from the AW and recreate it from the XML. This should flush out any AW metadata issues.

Similar Messages

ORA-36695: The length of GID dimension status is 2

I am running a maintenance job for a dim i just created and I am getting the error below. Please assist.
Thanks
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-00703: error executing OLAP DML command "(GROUPINGID OLAP.HCI_OLAP!ERROR_DIMENSION_AGGRREL INTO OLAP.HCI_OLAP!ERROR_DIMENSION_GID USING OLAP.HCI_OLAP!ERROR_DIMENSION_LEVELREL GID : ORA-36695: The length of GID dimension status is 2. The length of LEVEL dimension status is 3.
)", Generic at TxsOqAWManager::executeCommand
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$2.construct(UBuildWizardHelper.java:481)
at oracle.olap.awm.ui.SwingWorker$2.run(SwingWorker.java:109)
at java.lang.Thread.run(Unknown Source

I am using awm11.2.0.3.0A. It seems the issue was caused by the Hierarchies I had created in the dim. I removed the levels and only had one level and the errors were gone. I will have to test it now with the business requirement if this will work. The challenge is understanding the data and what it's used for me. Thanks for the assistance.
Thanks

ORA-20001: The printing engine..Is this related to a BIP licensing issue?

Hello all,
The error "ORA-20001: The printing engine could not be reached because either the URL..." happens in 2 cases:
<pre>
1. When our BIP is down or being bumped
2. As an APEX administrator, in workspace environment settings, the print server is set to OFF.
</pre>
I'm thinking that this is a licensing issue but I need some clarification on what is causing the error, because all we are trying to do is bring up a PDF report that a user can open or save. BIP is not involved at this point. Is it because the report was developed using BIP that APEX needs BIP up? How does APEX even know the report was developed using BIP? Were are using APEX 3.2.1.00.12 and BIP 10.1.3.4.1
The error happens when a user clicks on a PDF icon that calls an "After Submit Process". The following is the code and the report that was created in BIP is loaded into APEX with a "Named Columns (RTF)" layout type.
Alex.
declare
l_xml                         clob;
l_template                    clob;
l_request_blob                blob;
l_response                    blob;
begin
   ...call up a stored proc to populate l_xml with report data
-- Fetch template
select page_template
into   l_template
from   apex_030200.wwv_flow_report_layouts
where flow_id = :app_id
and    report_layout_name = 'pdf_report';
-- Convert CLOB to BLOB
l_request_blob := wwv_flow_utilities.clob_to_blob(l_xml);
-- Call unsupported and undocumented APEX function
l_response :=
    apex_030200.wwv_flow_print_util.convert(
      p_report_data   => l_request_blob,
      p_template      => l_template,
      p_template_type => 'rtf',
      p_output        => 'pdf'
-- Set correct mime type and download response
owa_util.mime_header('application/pdf', false);
htp.p('Content-length: ' || dbms_lob.getlength(l_response));
htp.p('Content-Disposition: attachment; filename="Claim_details.pdf"');
owa_util.http_header_close;
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
wpg_docload.download_file(l_response);

See, http://www.oracle.com/technetwork/developer-tools/apex/configure-printing-093060.html
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#CBHBJDDE
(excerpt copied here, for you convenience)
7. Enabling Network Services in Oracle Database 11g
By default, the ability to interact with network services is disabled in Oracle Database 11g release 1 (11.1). Therefore, if running Oracle Application Express with Oracle Database 11g release 1 (11.1), use the new DBMS_NETWORK_ACL_ADMIN package to grant connect privileges to any host for the FLOWS_030100 database user. Failing to grant these privileges results in issues with PDF/report printing, specifically, you will get the following error message:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Follow the steps mentioned in the Oracle Application Express Installation Guide, Enabling Network Services in Oracle Database 11g. Also refer to the troubleshooting section in case you receive an ORA-44416: Invalid ACL error after running the previous script.

Error: ORA-16525: the Data Guard broker is not yet available

Hi ,
After upgrading from 11201 to 11203 ON AIX GI/RDBMS on standby but have not upgraded the primary db yet.I had set dg_broker_start=false and disable configuration before i started the upgrade .
once the GI for oracle restart was upgraded i upgraded the rdbms binaries and brought up the standby on mount ,while trying to enable configuration its throwing the below error.I had already started the broker process.
SQL> show parameter dg_
NAME TYPE VALUE
dg_broker_config_file1 string /u01/app/omvmxp1/product/11.2.
0/dbhome_2/dbs/dr1mvmxs2.dat
dg_broker_config_file2 string /u01/app/omvmxp1/product/11.2.
0/dbhome_2/dbs/dr2mvmxs2.dat
dg_broker_start boolean TRUE
DGMGRL> show configuration;
Configuration - Matrxrep_brkr
Protection Mode: MaxAvailability
Databases:
mvmxp2 - Primary database
mvmxs2 - Physical standby database
Error: ORA-16525: the Data Guard broker is not yet available
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
from drcmvmxs2.log
Starting Data Guard Broker bootstrap <<Broker Configuration File Locations:
dg_broker_config_file1 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
dg_broker_config_file2 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
12/19/2012 16:05:33
Data Guard Broker shutting down
DMON Process Shutdown <<12/19/2012 16:10:20
Starting Data Guard Broker bootstrap <<Broker Configuration File Locations:
dg_broker_config_file1 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
dg_broker_config_file2 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
~
Regards
Edited by: Monto on Dec 19, 2012 1:23 PM

Hi,
I removed the configuration and removed the broker files from RAC primary(mvmxp2) and single instance standby(mvmxs2) and re-created back.i tried it many times but getting error "ORA-16532" .I needed to have this standby backup before i start upgrading the primary.
SQL> alter system set dg_broker_start=true scope=both;
System altered.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
palmer60:/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs>dgmgrl
DGMGRL for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys@mvmxp2
Password:
Connected.
DGMGRL> CREATE CONFIGURATION 'Matrxrep'
AS
PRIMARY DATABASE IS 'mvmxp2'
CONNECT IDENTIFIER IS 'mvmxp2';> > >
Configuration "Matrxrep" created with primary database "mvmxp2"
DGMGRL> ADD DATABASE 'mvmxs2'
AS
CONNECT IDENTIFIER IS 'mvmxs2'
;Database "mvmxs2" added
DGMGRL> SHOW CONFIGURATION;
Configuration - Matrxrep
Protection Mode: MaxPerformance
Databases:
mvmxp2 - Primary database
mvmxs2 - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
DISABLED
DGMGRL> ENABLE CONFIGURATION;
Enabled.
DGMGRL> SHOW DATABASE MVMXS2;
Database - mvmxs2
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: (unknown)
Apply Lag: (unknown)
Real Time Query: OFF
Instance(s):
mvmxs2
Database Status:
DGM-17016: failed to retrieve status for database "mvmxs2"
ORA-16532: Data Guard broker configuration does not exist
ORA-16625: cannot reach database "mvmxs2"
DGMGRL>
tailed the drcmvmxs2.log during stop and start of the broker
palmer60:/u01/app/omvmxp1/diag/rdbms/mvmxs2/mvmxs2/trace>tail -f drcmvmxs2.log
12/19/2012 20:32:20
drcx: cannot open configuration file "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
12/19/2012 20:32:55
drcx: cannot open configuration file "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
12/19/2012 20:59:10
Data Guard Broker shutting down
DMON Process Shutdown <<12/19/2012 20:59:35
Starting Data Guard Broker bootstrap <<Broker Configuration File Locations:
dg_broker_config_file1 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
dg_broker_config_file2 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
Not sure how to fix this one.
Regards

Create Materialized View ORA-01723: zero-length columns are not allowed

I am trying to create a materialized view which derives a column from a function and I get: ORA-01723: zero-length columns are not allowed.
I am using 10gR2 with the following definition (simple version):
CREATE MATERIALIZED VIEW AS
SELECT
function_name(column_name) COLUMN_ALIAS
FROM table_name;
I have even tried to cast it like below:
CREATE MATERIALIZED VIEW AS
SELECT
CAST(function_name(column_name) AS VARCHAR2(200)) COLUMN_ALIAS
FROM table_name;
My function does have an exception to return a value even if no values are found.
I have looked all over for the solution. Does anyone have a way around this issue? I really need my function to derive the column as it has business rules which I cannot join into my materialized view definition. My only hope around this is to insert the values into a table and then create a materialized view from that table, I don't want to do that if someone has a solution around this.
Any help would be greatly appreciated.
Thank you,
Kyle
Edited by: Kyle Miller on Apr 19, 2011 8:28 AM

Have you tried creating a table with the correct structure and then creating the materialized view based on the prebuilt table as described here...
http://www.oaktable.net/content/ultra-fast-mv-alteration-using-prebuilt-table-option
Cheers
Ben

ORA-09100 specified length too long for its datatype with Usage Tracking.

Hello Everyone,
I'm getting an (ORA-09100 specified length too long for its datatype) (a sample error is provided below) when viewing the "Long-Running Queries" from the default Usage Tracking Dashboard. I've isolated the problem to the logical column "Logical SQL" corresponding to the physical column "QUERY_TEXT" in the table S_NQ_ACCT. Everything else is working correctly. The logical column "Logical SQL" is configured as a VARCHAR of length 1024 and the physical column "QUERY_TEXT" is configured as a VARCHAR2 of length 1024 bytes in an Oracle 11g database. Both are the default configurations and were not changed.
In the the table S_NQ_ACCT we do have record entries in the field "QUERY_TEXT" that are of length 1024 characters. I've tried various configuration such as increasing the the number of bytes or removing any special character but without any sucess. Currently, my only possible workaround is reducing the "Query_Text" data entries to roughly 700 characters. This makes the error go away. Additional point my character set to WE8ISO8859P15.
- Any suggestions?
- Has anyone else ever had this problem?
- Is this potentially an issue with the ODBC drive? If so, why would ODBC not truncate the field length?
- What is the maximum length supported by BI, ODBC?
Thanks in advance for everyones help.
Regards,
FBELL
*******************************Error Message**************************************************
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 910, message: ORA-00910: specified length too long for its datatype at OCI call OCIStmtExecute: select distinct T38187.QUERY_TEXT as c1 from S_NQ_ACCT T38187 order by c1. [nQSError: 17011] SQL statement execution failed. (HY000)
SQL Issued: SELECT Topic."Logical SQL" saw_0 FROM "Usage Tracking" ORDER BY saw_0
*******************************************************************************************

I beleieve I have found the issue for at least one report.
We have views in our production environment that call materialized views on another database via db link. They are generated nightly to reduce load for day-old reporting purposes on the Production server.
I have found that the report in question uses a view with PRODUCT_DESCRIPTION. In the remote database, this is a VARCHAR2(1995 Bytes) column. However, when we create a view in our Production environment that simply calls this materialized view, it moves the length to VARCHAR2(4000).
The oddest thing is that the longest string stored in the MV for that column is 71 characters long.
I may be missing something here.... But the view that Discoverer created on the APPS side also has a column length for the PRODUCT_DESCRIPTION column of VARCHAR2(4000) and running the report manually returns results less than that - is this a possible bug?

Dashboard refresh - ORA-24373 invalid length specified for statement

Post Author: Reesy
CA Forum: Performance Management and Dashboards
I am getting the following error message in the log file "ORA-24373: invalid length specified for statement" when trying to refresh a metric via dashboard manager. The metric has been successfully refreshed previously. The only change that I am aware of is that more data has been added to the underlying database (Oracle 10g).
There are a number of different filters on the metric - some work ok - some give the above error.
Can anyone help?
Cheers

IWOULDFORMATMYCODESOITISREADABLEUSINGMIXEDCASESPACESANDNEWLINES.
ATABLEALIASWOULDPROBABLYHELPTOO.

Error -ORA-01483: invalid length for DATE or NUMBER bind variable

In discoverer plus, attempt to save a discoverer workbook into the database fails with the error:
ORA-01483 invalid length for DATE or NUMBER bind variable
The same workbook can be safely saved in "My Computer".
Any idea why and what is the solution.

Why: not quite sure, probably the code is validating the workbook when it saves it to the db and you've got an error in the sql. What happens when you run the workbook that you saved to the file system? Does it show the same error when run?
Solution: Can you post the sql in the workbook? In the meantime try the following: Replace any to_char statements around dates with to_date statements instead. For example:
Replace:
where to_char(mydate, 'dd-mon-yyyy') = '05-apr-2009'
With:
where mydate = to_date('05-APR-2009','DD-MON-YYYY')

ORA-33858: The value of the ampersand-substitution expression is NA." Cube

Hi David ,
While deleting a cube I am gettingbelow error . Any reason as the error is not easy to understand .
The transaction is not committable: "An error has occurred on the server
Error class: Express Failure
Server error descriptions:
DPR: cannot create server cursor, Generic at TxsOqDefinitionManager::generic<CommitRoot>
INI: XOQ-01600: OLAP DML error "ORA-33858: The value of the ampersand-substitution expression is NA." while executing DML "SYS.AWXML!R11_MANAGE_CUBE('BASE_PLAN_AGGR.CUBE' 'DELETE')", Generic at TxsOqStdFormCommand::execute
at oracle.olapi.transaction.BaseTransaction.commit(Unknown Source)
at oracle.olapi.transaction.BaseTransactionProvider.commitCurrentTransaction(Unknown Source)
at oracle.olap.awm.dataobject.DatabaseDO.commitOLAPI(Unknown Source)
at oracle.olap.awm.dataobject.aw.WorkspaceDO.commitOLAPI(Unknown Source)
at oracle.olap.awm.dataobject.olapi.UModelDO.commitOLAPI(Unknown Source)
at oracle.olap.awm.dataobject.olapi.UModelDO.delete(Unknown Source)
at oracle.olap.awm.dataobject.olapi.UCubeDO.delete(Unknown Source)
at oracle.olap.awm.navigator.node.DeleteThread.run(Unknown Source)
Many thanks,
DxP

Hi David ,
Now we are getting the same problem while adding one of the dimension to our cube . Before addition of that dimension the cube was running fine . Now if we add this and click apply then it is throwing the same error . However that dimension has been used in different cube in same workspace and it is perfectly fine there.
Not able to understand the cause and the problem for the addition of new dimension there .
Any clue ? or same BUG /
Rgds,
DxP

ORA-28000: the account is locked Error

Hello ---
I'm trying to set up a data source to an 11g DB from WLS 11gR1. When I go to test it I get the following error even though the account is definitely not locked :
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: ORA-28000: the account is locked
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:479)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:173)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1193)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1117)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:244)
Truncated. see log file for complete stacktrace
Any ideas? Thanks!

Hi. Please add your details to this program and run it in that environment.
Thanks,
Joe
import java.sql.*;
import java.util.*;
import javax.sql.*;
import java.lang.reflect.Method;
public class thinXACon {
public static void main (String argv[]) {
String UserName = "myUser";
String Password = "myPassword";
String SID = "mySID";
String ServerName = "myDBMSBox";
String PortNumber = "1588";
String URL = "jdbc:oracle:thin:@" + ServerName + ":" + PortNumber + ":" + SID;
try {
// load XA driver and get connection
oracle.jdbc.xa.client.OracleXADataSource ods = new oracle.jdbc.xa.client.OracleXADataSource();
initProp(ods, "User", UserName);
initProp(ods, "Password", Password);
initProp(ods, "SID", SID);
initProp(ods, "PortNumber", PortNumber);
initProp(ods, "ServerName", ServerName);
initProp(ods, "URL", URL);
XAConnection xaConn = ods.getXAConnection();
} catch (Exception e) {
e.printStackTrace ();
private static void initProp(Object ds, String propName, Object value) {
try {
Method[] meths = ds.getClass().getMethods();
Method meth = null;
String setterName = "set" + propName;
Class paramType = null;
for (int i = 0; i < meths.length; i++) {
if (meths.getName().equalsIgnoreCase(setterName) &&
meths[i].getParameterTypes().length == 1) {
meth = meths[i];
paramType = (meths[i].getParameterTypes())[0];
break;
if (meth != null) {
Object val = value;
if (value instanceof String) {
if (paramType == int.class) {
val = Integer.valueOf((String)value);
} else if (paramType == boolean.class) {
val = Boolean.valueOf((String)value);
meth.invoke(ds, new Object[]{val});
} else {
meth = ds.getClass().getMethod(
"setProperty", new Class[]{String.class, Object.class});
meth.invoke(ds, new Object[]{propName, value});
} catch (Exception ignore) { }

SQL*Loader-128: unable to begin a session ORA-28000: the account is locked

Hi everyone,
I am migrating from a SQL Server 2000 DB to Oracle 10g. I followed the migration tutorial and got all the way till the data migration process. The DB data capture scripts capture the data from the SQL Server successfully but i encounter the following error while i run the oracle_ctl.bat file on the Oracle side:
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Jun 9 14:08:27 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-128: unable to begin a session
ORA-28000: the account is locked
I checked the account and its unlocked and the user name/password combination is the correct one. All the log files have the same error messages. The user has all the required privileges.
Any ideas why this might be happening ?
Thanks,
Amo.

Hello,
there may be several causes for this:
1) account in grace period, it can login to sqlplus but could not logn with sqlldr
2) kind of user being specified (sys as sysdba for example)
Could you please paste first lines of modified batch file and
output from select user and status in dba_users ?
Try anyway to run the unlock command
ALTER USER username ACCOUNT UNLOCK;
Thanks
Regards,
Marcello
Edited by: MGILIBER on Jun 12, 2009 3:02 AM

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

ORA-16525: the Data Guard broker is not yet available while conneting ...

Hi,
I am trying to connect oracle database instance in dgmgrl prompt.
Following error message appear ...
DGMGRL>
DGMGRL> connect sys/<password>@<oracle_service_name>
Connected.
Error:
ORA-16525: the Data Guard broker is not yet available
ORA-06512: at "SYS.DBMS_DRS", line 124
ORA-06512: at line 1
DGMGRL> exit
$ e
We are using oracle enterprise manager ...
SSM

DG broker is the way to go. There are only minor points you can't control - like when you have standby redo logs and no redo application delay, dg broker will always start real-time apply.
Also, DG broker is the only way if you want fast-start failover (10gR2 feature).
What is the latency of your nework, especially under load? Add this latency to each commit - will the commit time be acceptable? If not, you cannot use sync.
What version do you use? In 10gR1, there are issues with async - there is only about 50MB buffer, and if you get such backlog, even with async commit will wait for standby. (In 10gR2 this is solved, async will read from disk redo logs.)
NET_TIMEOUT - set it low for sync (so commits won't hang long), higher for async. Default is 180 seconds, Oracle recommends minimum value to 10 seconds. I would start with 10 sec for sync, 180 for sync. The main question is, how reliable your network is, and how long brownouts you want to survive without affecting data protection (with the expense of performance).
Regarding the proper setting of all bells and whistles of archive_log_dest_n - I had best experience with leaving it to dg broker. Just set LogXptMode property to sync/async/arch, and let dg broker set everything else (service, valid_for, affirm, retries...).
The authoritative source: http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm#Publications
If you are on 10.2.0.1 - 10.2.0.3, please see metalink bug 5578157, 5587231 - if sqlnet.outbound_connection_timeout is not set, the lgwr can hang even if net_timeout is set. (Yes, real-world experience:-)

ORA-20100 The system cannot find the file specified 0RA-06512

I can create and deploy a .NET stored procedure but when I run it either from Visual Studio 2005 Oracle Explorer or TOAD or SQLPlus I get the following:
ORA-20100: The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_CLR", line 211
ORA-06512: at "PROD.GETSEGADDRNO", line 7
ORA-06512: at line 1
It is basically the same C# code as the OTN sample except for accessing a table in my database.
I found a forum thread dated 2006 with basically the same error message and it said the problem was fixed in Oracle Database patched to 10.2.0.2 but I can't find such a patch for 10g R2 Enterprise.
This is my first time setting up Server 2003, Oracle 10g and ODT for .NET
(I successfully created and deployed an external procedures for Oracle 8.1.7 on Windows 2000 a couple of years ago)
This is the code:
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;
// use the ODP.NET provider
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace CLRLibrary1
// Sample .NET stored function returning address number (ADDR_NO) for
// a given segment number (SEG_NO)
public class Class1
public static int GetSegAddrNo(int segno)
int addrno = 0;
// Check for context connection
OracleConnection conn = new OracleConnection();
if (OracleConnection.IsAvailable == true)
conn.ConnectionString = "context connection=true";
else
throw new InvalidOperationException("context connection" +
"not available");
conn.Open();
// Create and execute a command
OracleCommand cmd = conn.CreateCommand();
cmd.CommandText = "SELECT ADDR_NO FROM SEG WHERE SEG_NO = :1";
cmd.Parameters.Add(":1", OracleDbType.Int32, segno,
System.Data.ParameterDirection.Input);
OracleDataReader rdr = cmd.ExecuteReader();
if (rdr.Read())
addrno = rdr.GetInt32(0);
rdr.Close();
cmd.Dispose();
conn.Close();
return addrno;
} // GetSegAddrNo
} // Class1
} // CLRLibrary1
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
was installed from the Oracle downloads site: 10201_database_win32.zip
On Windows Server 2003 R2 Standard Edition SP2
Oracle .NET tools was installed using: ODTwithODAC1020221.exe
The CLR Service is running
Deployment says that it is successfull.
The DLL is in the expected Oraclehome\BIN\CLR folder
The deployment script is:
CREATE OR REPLACE LIBRARY "SYS"."ORATEST6_DLL" AS '$ORACLE_HOME\bin\clr\OraTest6.dll';
GRANT EXECUTE ON "SYS"."ORATEST6_DLL" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLR" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRTYPE" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRPARAMTABLE" TO PROD;
CREATE OR REPLACE FUNCTION PROD.GETSEGADDRNO wrapped
a000000
1f
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
8
147 138
ePHIr6kvu6nZ9gYrxgs40akg18owg1zQf/ZqZ3QC2vjqaIs25soMp1nBmBfBj1ZboVvNkdPT
8qhpuEVdmv4n2nlF5ynrhLsm3F0h9ZGrTQ4tGYIybWjMFxYNlDDeBOx1i7O0GviP8AxHys23
kW8aTVA2xV8IuLNlwP7KWFw70tGbg+lUIlRhYo5WmLW6N9wcjOCeLZK6W6s6tvd4zKAQykzc
sIsaneE0FWyV9Q1BD0yJpLoCfWH+f6fVXsne5Feyxu68k5geCJ8F5FCLm2ycvxIiKNKTIpiD
q4wshbsYLTTPHX3F6pA=
The parameter mapping is:
return value int32 number
segno int32 number
Bob Sorrell
[email protected]
863-662-5524

These are the Reference Properties for Oracle.DataAccess in the OraTest6 app:
Aliases: Global
Copy Local: False
Description: Oracle.DataAccess.dll
File Type: Assembly
Identity: Oracle.DataAccess
Path: c:\oracle\ora102\odp.net\bin\2.x\Oracle.DataAcess.dll
Resolved: True
Runtime Version: v2.0.50727
Specific Version: False
Strong Name: True
Version: 2.102.2.20
This is what GacUtil shows:
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.DataAccess, Version=1.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Number of items = 2
The GAC seems to contain both 2.102.2.20 and 1.102.2.20
Do I need to remove one?

How to maintain Status at the line item level

Hi Folks,
How to maintain the status at the line item level. I could able to find the path in the IMG for Header level. I will be looking forward for the path or the procedure for maintaining the status at the Line item level. Do the needful. Thank you.
Regards,
Amrita

Hi Amrita,
Goto SPRO>Customer Relationship Management>Transactions>Basic Settings>Define Item Categories, Select your Item category and click on Details. Witin profiles set type Assign Status profile you created against field Status profile.
Hope this helps.
Regards,
Chandrakant

ORA-36695: The length of GID dimension status is 2. The length of LEVEL dim

Similar Messages

Maybe you are looking for