ORA 7445 -  [FFFFFFFF7E5DE234]

[i]ORA-07445: exception encountered: core dump ORA-07445: exception encountered: core dump [FFFFFFFF7E5DE234] [SIGSEGV] [Address not mapped to object] [0x123FA07000000] [] [][SIGSEGV] [Address not mapped to object] [0x123FA07000000] [] []

A little background about ORA-7445 much like Ora-600 Error
It's generic error most likely caused by a Bug.
If you can't obtain support from Oracle try to upgrade your Oracle version.
What is an ORA-7445 error?
An ORA-7445 error is raised by an Oracle server process when it has received a fatal signal from the operating system. The error may be raised in either a foreground or background process. The process will normally
write an error to the alert log
write a trace file in either user_dump_dest or background_dump_dest
create a core dump in core_dump_dest
There are many 'illegal' operations that the operating system can trap; a common example is a process writing to an invalid memory location. To protect the system, the offending process will be sent a fatal signal.
Typically, the signals seen are SIGBUS (signal 10, bus error) and SIGSEGV (signal 11, segmentation violation).
There are other UNIX signal and exception that may happen; However, they are likely cause by OS program than a Oracle problem.
Example of other signals are : SIGINT, SIGKILL, SIGSYS. A complete list is available at (Note 1038055.6
An ORA-7445 is a generic error, and can occur from anywhere in the Oracle code. The precise location of the error is identified by the trace file it produces.

Similar Messages

  • ORA-7445 after installation

    Hi,
    I have a specific problem on one notebook. It's a windows 2000 SP4. The installation log does not contain an obvious error message. But after installation, the database homepage doesn't start.
    When looking in the alert file I find those ORA 7445 and ORA 472 errors. When starting up the database using sqlplus and stepping through nomount , mount, open, it seems that the database is running for a short period and then again ends up with the above errors.
    Any ideas?

    Hi
    ORA 7445 indicates that oracle has detected a core dump when attempting a particular operation. To identify a bug you need to look at the first argument after the 7445 error as this identifies the module where the exception was raised. Use this together with the stack produced to identify a bug if possible. The ORA-600/ORA-7445 Troubleshooter will help identify bugs known to core dump in the identified module. https://metalink.oracle.com/metalink/plsql/f?p=130:14:1905955764385093414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,153788.1,1,0,1,helvetica
    Also look into the Customer Introduction to ORA-7445 Errors at https://metalink.oracle.com/metalink/plsql/f?p=130:14:1905955764385093414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,211909.1,1,0,1,helvetica
    -Priya

  • ORA-7445[qkarid()+872] error

    Hi,
    I am using Binary XML DB .
    Here is the DB banner info.
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    "CORE     11.2.0.1.0     Production"
    TNS for Linux: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    I am getting ORA-7445[qkarid()+872] error while executing a query
    SELECT XMLCast(XMLQuery('$p/PurchaseOrder/Reference' PASSING OBJECT_VALUE AS "p"
    RETURNING CONTENT)
    AS VARCHAR2(30)) "Reference"
    FROM purchaseorder
    WHERE XMLExists('$p/PurchaseOrder[User="SBELL"]' PASSING OBJECT_VALUE AS "p") for update wait 60;
    Please advise
    Thanks

    Update to 11.2.0.3.0 and see if it goes away. If that is not poissble open a tar with Oracle Support
    c:\xdb\examples\SXI_Generator>sqlplus SXIGEN/SXIGEN
    SQL*Plus: Release 11.2.0.3.0 Production on Mon Mar 5 12:48:17 2012
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> desc PURCHASEORDER
    Name                                      Null?    Type
    TABLE of SYS.XMLTYPE STORAGE BINARY
    SQL> SELECT XMLCast(XMLQuery('$p/PurchaseOrder/Reference' PASSING OBJECT_VALUE AS "p"
      2  RETURNING CONTENT)
      3  AS VARCHAR2(30)) "Reference"
      4  FROM purchaseorder
      5  WHERE XMLExists('$p/PurchaseOrder[User="SBELL"]' PASSING OBJECT_VALUE AS "p") for update wait 60;
    Reference
    SBELL-20100408134226318PDT
    SBELL-20100419204001680PDT
    SBELL-20100420220510663PDT
    SBELL-20100422220520735PDT
    SBELL-20100427173413101PDT
    ...Edited by: mdrake on Mar 5, 2012 12:48 PM

  • Ora 600 and ora 7445 error in oracle 10g r2

    hi all,
    we are using Oracle 10g r2.
    os is windows 2003 server,
    ram is 4 gb.
    front end is java .
    we got a below mentioned errors.
    i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
    and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
    and Error 0 in kwqmnpartition(), aborting txn errors.
    for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
    what is reason for theis error . how it will rectifiy.?
    pls advice.Below i attached the alret log message .
    Sun Aug 02 04:04:24 2009
    Error 0 in kwqmnpartition(), aborting txn
    Sun Aug 02 05:48:10 2009
    Error 0 in kwqmnpartition(), aborting txn
    Sun Aug 02 05:49:10 2009
    Error 0 in kwqmnpartition(), aborting txn
    Sun Aug 02 07:38:49 2009
    Thread 1 advanced to log sequence 1732
    Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
    Sun Aug 02 07:44:14 2009
    Error 0 in kwqmnpartition(), aborting txn
    Sun Aug 02 07:45:14 2009
    Error 0 in kwqmnpartition(), aborting txn
    Sun Aug 02 22:00:26 2009
    Thread 1 advanced to log sequence 1733
    Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
    Mon Aug 03 07:08:15 2009
    Thread 1 advanced to log sequence 1734
    Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
    Mon Aug 03 09:28:23 2009
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 09:30:27 2009
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 11:42:47 2009
    Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
    ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
    Mon Aug 03 13:20:00 2009
    Thread 1 advanced to log sequence 1735
    Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
    Mon Aug 03 16:07:07 2009
    Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
    Mon Aug 03 16:07:11 2009
    Process m000 died, see its trace file
    Mon Aug 03 16:07:11 2009
    ksvcreate: Process(m000) creation failed
    Mon Aug 03 16:08:37 2009
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 16:10:40 2009
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 17:25:05 2009
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 17:27:11 2009
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 17:32:19 2009
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 17:33:24 2009
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 18:52:08 2009
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 18:54:09 2009
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 19:05:33 2009
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Mon Aug 03 19:09:02 2009
    Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
    Mon Aug 03 19:10:27 2009
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn
    Error 0 in kwqmnpartition(), aborting txn

    Hi reshumakur
    As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
    1- Alert log
    2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
    3- Describe what was happening when you had these errors.
    Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
    Then Do your best to patch 10.2.0.4 and the latest CPU patch.
    Good Luck

  • My standby is flooding ORA 7445 [ph2csql_analyze()+1148] this error

    Linux 2.6.18-274.18.1.el5
    oracle 11.2.0.1.0
    <msg time='2013-01-18T08:06:13.452+09:00' org_id='oracle' comp_id='rdbms'
    msg_id='1983831653' type='INCIDENT_ERROR' group='Access Violation'
    level='1' host_id='jpbcpwebdb01lnx.jp.fid-intl.com' host_addr='10.161.70.102'
    prob_key='ORA 7445 [ph2csql_analyze()+1148]' upstream_comp='' downstream_comp=''
    ecid='' errid='55778' detail_path='/apps/oracle/diag/rdbms/p2asiasb/p2asiasb/trace/p2asiasb_ora_9406.trc'>
    <txt>Errors in file /apps/oracle/diag/rdbms/p2asiasb/p2asiasb/trace/p2asiasb_ora_9406.trc (incident=55778):
    ORA-07445: exception encountered: core dump [ph2csql_analyze()+1148] [SIGSEGV] [ADDR:0x0] [PC:0x265E8F2] [Address not mapped to object] []
    </txt>
    </msg>
    Even run flush share_pool, no luck.
    Could you please help?

    Hi,
    Please check
    ORA-7445 [ph2csql_analyze] on Active Data Guard (Doc ID 1364370.1)
    A temporary workaround is to bounce the standby instance or manually flush the shared pool.
    Thanks,
    Krishna

  • ORA-7445

    After I log in EM, I find some errors:
    Hide 204903 ORA-7445 [sdbgrfuio_is_owner()+12] [ACCESS_VIOLATION] [ADDR:0x32931A40] [PC:0x65AED38] [UNABLE_TO_READ] Yes No Ready October 20, 2009 12:03:08 PM CST
    EM is too slow. How to improve its speed?

    YE wrote:
    After I log in EM, I find some errors:
    Hide 204903 ORA-7445 [sdbgrfuio_is_owner()+12] [ACCESS_VIOLATION] [ADDR:0x32931A40] [PC:0x65AED38] [UNABLE_TO_READ] Yes No Ready October 20, 2009 12:03:08 PM CST
    EM is too slow. How to improve its speed?You need to create a Service Request at metalink

  • Ora 7445 error happend on 11g r1

    I found many ora 07445 error on my database:
    Details     ID     Description     Data Dumped     Active     Status     Timestamp [Sorted in descending order]
    [Select to show information] Show
         111129     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 4:42:27 PM CST
    [Select to show information] Show
         111369     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 4:38:05 PM CST
    [Select to show information] Show
         111330     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 4:37:58 PM CST
    [Select to show information] Show
         111081     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 4:26:51 PM CST
    [Select to show information] Show
         111025     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 4:19:36 PM CST
    [Select to show information] Show
         111282     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 3:37:35 PM CST
    [Select to show information] Show
         111393     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 2:50:21 PM CST
    [Select to show information] Show
         111497     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 2:02:42 PM CST
    [Select to show information] Show
         111217     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 1:15:24 PM CST
    [Select to show information] Show
         111113     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 12:28:06 PM CST
    [Select to show information] Show
         111281     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 11:41:20 AM CST
    [Select to show information] Show
         111593     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 11:08:03 AM CST
    [Select to show information] Show
         111569     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 10:57:24 AM CST
    [Select to show information] Show
         111329     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 10:50:01 AM CST
    [Select to show information] Show
         111121     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 10:36:48 AM CST
    [Select to show information] Show
         110777     ORA 7445 [ttci2u()+3660] [ttci2u()+3660] [SIGSEGV] [ADDR:0x0] [PC:0x105698A0C] [Address not mapped to object] [] [] []     Yes     Yes     Ready     February 2, 2010 3:52:08 AM CST
    How to resolve?
    Edited by: user3799828 on Feb 2, 2010 1:14 AM
    Edited by: user3799828 on Feb 2, 2010 1:15 AM

    Lookup MOS document 310737.1 for this. You are better off raising an SR with Oracle support as others have indicated.

  • DATABASE SHUTDOWN 후 STARTUP시 ORA-7445가 발생하면서 OS PROMPT로 빠짐

    제품 : ORACLE SERVER
    작성날짜 : 2002-04-10
    DATABASE SHUTDOWN 후 STARTUP시 ORA-7445가 발생하면서 OS PROMPT로 빠짐
    =====================================================================
    Server Platform : Sparc Sunw Ultra Enterprise 10000
    (CPU 44개, Main Memory 9 Megabytes)
    ORACLE RDBMS 7.3.3.4
    ORACLE PARALLEL SERVER 환경
    Sun Cluster Volume Manager 2.0
    DB size : 약 1.2 Terabytes (=1200 Gigabytes)
    관련 TAR : 9168089.7
    조치 내역 :
    1. init.ora에 다음의 event와 hidden parameter를 설정
    1) event="10210 trace name context forever, level 10"
    (Data Block Integrity를 check, Refer to Note 21184.1)
    2) event="10211 trace name context forever, level 10"
    (Data Block Integrity를 check, Refer to Note 21185.1
    3) dbblock_cache_protect = true (Refer to note18144.1)
    corrupt된 block이 memory에 load되는 것을 방지
    2. Startup mount 후 recover database를 실행
    ORA-600[6593] [26]발생 - Detection of block corruption
    3. alter database open 실행
    ORA-1578 file#88 block #172628 발생 하였으나
    ORA-7445 없이 open됨
    (문제가 되는 특정 테이블과 데이타 블럭 발견)
    4. 위의 file block에 data를 확인하기 위하여 block dump를 함
    "Alter session set events 'immediate trace name
    blockdump level xxxxx"
    ( xxxxx는 Data Block Address 값의 decimal 값)
    - Block dump에 있는 hexa값을 ascii로 변환
    5. corrupt된 block을 제외한 data를 recover하기 위하여 새로운
    tablespace를 생성 후 다음 실행.
    "Insert into (TABLEA) select * from (TABLEB)
    where index_column > ' '
    and rowid not like 'corrupt된 row의 rowid들';"
    (TABLEA는 corrupt되지 않은 row들을 제외한 나머지 row들을
    포함할 새로운 테이블이고, TABLEB는 corrupt된 row들을 갖고
    있었던 기존의 테이블)
    6. 새로 생성한 테이블의 데이타 확인한 후 기존의 corrupt된
    테이블 drop시킴
    7. 새 테이블을 rename하여 기존의 테이블 이름과 같게 함.

  • DB was down with ora-7445

    Hi,
    oracle 9.2.0.8
    os:solaris
    one of my (OLAP) prod DB was down with ora-7445.can any one please help.
    thanks ,
    Sam.

    sam995972 wrote:
    log info:
    Thu Apr 3 16 00:42:54 2013
    ARCH: Completed archiving log 3 thread 1 sequence 135381
    Thu Apr 3 16 00:43:03 2013
    Completed checkpoint up to RBA [0x210d6.2.10], SCN: 0x09f8.7497c3b
    Completed checkpoint up to RBA [0x210d5.2.10], SCN: 0x09f8.7497c35
    Completed checkpoint up to RBA [0x210d4.2.10], SCN: 0x09f8.747b09d
    Thu Apr 3 16 00:52:01 2013
    Errors in file /ora/admin/JP00DP/udump/JP00DP_ora_16715.trc:
    ORA-07445: exception encountered: core dump [0000000101CA36F8] [SIGBUS] [Invalid address alignment] [0xA9875D0008000B] [] []
    Thu Apr 3 16 00:52:06 2013
    Errors in file /ora/admin/JP00DP/bdump/JP00DP_pmon_17895.trc:
    ORA-07445: exception encountered: core dump [0000000101CA33F8] [SIGBUS] [Invalid address alignment] [0xA9875D0008000B] [] []
    Thu Apr 3 16 00:52:06 2013
    Errors in file /ora/admin/JP00DP/bdump/JP00DP_pmon_17895.trc:
    ORA-07445: exception encountered: core dump [0000000101E55984] [SIGBUS] [Invalid address alignment] [0xA9875D0008000B] [] []
    ORA-00602: internal programming exception
    ORA-07445: exception encountered: core dump [0000000101CA33F8] [SIGBUS] [Invalid address alignment] [0xA9875D0008000B] [] []
    Thu Apr 3 16 00:52:11 2013according to above info it is a BUG.
    if you have extended support plz contact support.oracle.com

  • ORA-7445 [ACCESS_VIOLATION] [unable_to_trans_pc]  followed by ORA-600[kgass

    please find below errors which occer frequentily in my database
    Errors in file d:\oracle\admin\opera\udump\opera_ora_3472.trc:
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x8AAA15] [ADDR:0x18] [UNABLE_TO_READ] []
    ORA-00600: internal error code, arguments: [kgassg_2], [], [], [], [], [], [], []
    My Db version is 10.2.0.3
    Please help to resolve such errors.
    Thanks in adv.
    Best regards,
    Bhavik

    Dear Bhavik,
    Point one:
    1) You need to work on
    600 is thrown while generating the trace file for 7445
    so you need work on ora-7445
    2) Please open the d:\oracle\admin\opera\udump\opera_ora_3472.trc
    paste the call stack in this thread
    3)
    Also look for any TNS error in alert log
    BTW, Are you from HYD?
    Kind Regards,
    Rakesh jayappa

  • ORA-7445 followed by ORA-472

    Hi All,
    My System Configuration is
    CPU: Intel Xeon Dual Core 2.5GHz.
    RAM: 8 GB
    Databse : Oracle 10.2.0.2
    Interim Oracle Patch: 18
    SAP: Solution Manager
    OS: Windows 2003 Standard Edition x86_64
    I have install the system successfully. I stop the SAP system & database for backup but is not starting while I chek the log files I found that the database is crashed. I check the log files & found the below error
    Dump file f:\oracle\smn\saptrace\background\smn_pmon_3160.trc
    Tue Jul 28 17:23:42 2009
    ORACLE V10.2.0.2.0 - 64bit Production vsnsta=0
    vsnsql=14 vsnxtr=3
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    Process Id: 0x00000cd4  Thread Id : 0x00000c58    Time : Tue Jul 28 17:23:42
    Excp. Code: 0xc0000005  Excp. Type: ACCESS_VIO    Flags: 0x00000000
    Registers -
    ip=0000000077EF1CD6 sp=000000000BB7B628 rp=0000000000000000
    r1=000000003AF40000 r2=00000000049D0E50 r3=00000000000001D0
    r4=0000000000000010 r5=000000000BB7B628 r6=0000000000000000 r7=00000000049D0E50
    r8=00000000049D0000 r9=0000000000000048 r10=0000000000000000 r11=0000000000000000
    r12=0000000000000246 r13=0000000000000000 r14=0000000000000006 r15=0000000000000048
    End of Registers -
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Abrupt exit from ksedmp in Exception Handler
    2009-07-28 17:23:42.140
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x77EF1CD6] [ADDR:0x1D0] [UNABLE_TO_READ] []
    ----- Call Stack Trace -
    calling              call     entry                argument values in hex     
    location             type     point                (? means dubious value)    
    0000000077EF1CD6              0000000000000000     000000000 000000000 000000000
                                                       000000000
    0000000077EF3CB7     CALL???  0000000077EF1CD6     000000000 077EF3B0C 000000001
                                                       000000100
    000007FF771B813D     CALL???  0000000077EF3CB7     000000010 000000000 000000048
                                                       000000010
    0000000000000010     CALL???  000007FF771B813D     000000000 000000048 000000010
                                                       000000000
    Binary Stack Dump -
    ========== FRAME [1] (0000000077EF1CD6 -> 0000000000000000) ==========
    Inaccessible memory range: 0000000000000000 -> 0000000000000400
    ========== FRAME [2] (0000000077EF3CB7 -> 0000000077EF1CD6) ==========
    Dump of memory from 0x000000000BB7B620 to 0x000000000BB7B870
    00BB7B620 00460019 00000001 77EF3CB7 00000000  [..F......<.w....]
    00BB7B630 00000000 00000000 77EF3B0C 00000000  [.........;.w....]
    00BB7B640 00000001 00000000 00000100 00000000  [................]
    00BB7B650 00000000 00000000 00000000 00000000  [................]
    In alert_sid.log file is
    ALTER DATABASE   MOUNT
    Tue Jul 28 17:23:42 2009
    Errors in file f:\oracle\smn\saptrace\background\smn_pmon_3160.trc:
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x77EF1CD6] [ADDR:0x1D0] [UNABLE_TO_READ] []
    Tue Jul 28 17:23:44 2009
    PSP0: terminating instance due to error 472
    Tue Jul 28 17:23:44 2009
    Errors in file f:\oracle\smn\saptrace\background\smn_mman_3164.trc:
    ORA-00472: PMON  process terminated with error
    I am not able to understand the error is due to memory or I have missed something to apply.
    Please help me to solve this.
    Thanks,
    Sachin

    Hi Markus,
    Thanks for your quick reply.
    As per the Standard SAP Installation Guide  Windows Server 2003 Standard / Enterprise / Datacenter  Edition is suppoted.
    See the document Page 48 Hardware and Software requirements.
    [https://websmp206.sap-ag.de/~sapidb/011000358700000512392008E/solman_40_sr4_win_ora.pdf]
    Thanks,
    Shambo

  • ORA-7445 when trying to call a function over JDBC

    Hi,
    We are trying to call a PL/SQL stored function which is in a package. When we call the procedure with SQLPlus or something different, it works fine, no error occurs. But when we try to call it over jdbc, we gat the following error plus an ORA-07445 error in the alert log. (running 8.1.7.4.0 on SunOS 5.8)
    UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:05:662 DEBUG Alert : Connection--Connection recovered--NO_ALERT--1044342009152
    UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:05:662 DEBUG Operation : Customer Update
    UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:05:682 DEBUG Unique Id : 1123839
    UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:09:998 ERROR Exception MessageNo more data to read from socket
    UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:09:998 ERROR Exception Code17410
    UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:09:998 ERRORjava.sql.SQLException: No more data to read from socket
    The alert log error is as follows :
    ORA-07445: exception encountered: core dump [kolcpcpy()+168] [SIGBUS] [Invalid
    address alignment] [2147484761] [] []
    Any help would be appreciated. Best regards.
    Ogun

    Hi Ogun,
    The "oerr" utility for your error code gives the following output:
    07445, 00000, "exception encountered: core dump [%s] [%s] [%s] [%s] [%s] [%s]"
    // *Cause: An OS exception occurred which should result in the creation of a
    // core file. This is an internal error.
    // *Action: Contact your customer support representative.
    Excuse the silly, obvious questions, but
    * have you examined the core dump?
    * have you contacted your customer support representative?
    * have you searched the "MetaLink" web site?
    http://metalink.oracle.com
    If you care to post the part of your java code that is causing the problem -- I may be able to help you.
    Good Luck,
    Avi.

  • Getting ora-7445 while initiating XMLDB in 11.2.0.3

    Hi, all
    The db is installed on windows 2008R2. While running catqm in 11.2.0.3, I am getting the following error:
    ORA-07445: exception encountered: core dump [kkqvmdrv2()+1410] [ACCESS_VIOLATION] [ADDR:0x0] [PC:0x144CA460C] [UNABLE_TO_READ] []
    The erroring SQL is:
    create or replace view XDS_ACL
      (ACLID, SHARED, DESCRIPTION, SECURITY_CLASS_NS,
           SECURITY_CLASS_NAME, PARENT_ACL_PATH, INHERITANCE_TYPE)
        as
        select a.object_id,
               substr(extractvalue(a.object_value, '/acl/@shared', 'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"'), 1, 5),
               extractvalue(a.object_value, '/acl/@description', 'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"'),
              xmlquery('declare namespace a="http://xmlns.oracle.com/xdb/acl.xsd"; fn:namespace-uri-from-QName(fn:data(/a:acl/a:security-class))' PASSING OBJECT_VALUE returning content),
              xmlquery('declare namespace a="http://xmlns.oracle.com/xdb/acl.xsd"; fn:local-name-from-QName(fn:data(/a:acl/a:security-class))' PASSING OBJECT_VALUE returning content),
              CASE existsNode(a.object_value, '/acl/extends-from',
                              'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"')
              WHEN 1
              THEN extractvalue(a.object_value, '/acl/extends-from/@href',
                                'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"')
              ELSE (CASE existsNode(a.object_value, '/acl/constrained-with',
                                    'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"')
                    WHEN 1
                    THEN extractvalue(a.object_value, '/acl/constrained-with/@href',
                                      'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"')
                    ELSE NULL END) END,
              CASE existsNode(a.object_value, '/acl/extends-from',
                              'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"') WHEN 1
              THEN 'extends-from'
              ELSE (CASE existsNode(a.object_value, '/acl/constrained-with',
                                    'xmlns="http://xmlns.oracle.com/xdb/acl.xsd"')
                    WHEN 1
                    THEN 'constrained-with'
                    ELSE NULL END) END
       FROM XDB.XDB$ACL a
    When I run this create view SQL on sqlplus, I can reproduce this error. Has anyone seen this before?
    Thanks,
    Jonathan.

    Your best bet will be to contact Oracle Support regarding this issue.  The ORA-07445 is an internal error in Oracle.  Nothing on the support site turns up for what you listed during a quick search at least.

  • ORA-07445 on Ubuntu 8.04

    Hello,
    I manage Oracle Database 10g Express Edition Release 10.2.0.1.0 on a Linux Ubuntu 8.04 server for some students.
    I've installed the package oracle-xe-universal
    Simple queries works fine but some like this one does'nt work :
    SQL> select nomf, nomp, prixp from ( commande co join client c on co.numc=c.numc ) join (produit p join fournisseur f on p.numf=f.numf ) on p.nomp=co.nomp where ( nomc = 'Jean');
    select nomf, nomp, prixp from ( commande co join client c on co.numc=c.numc ) join (produit p join fournisseur f on p.numf=f.numf ) on p.nomp=co.nomp where ( nomc = 'Jean')
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    Then, if I try any other querie I have the following error :
    ERROR:
    ORA-03114: not connected to ORACLE
    Here is what it gives on alert_XE.log :
    Fri Feb 12 10:35:43 2010
    Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_25191.trc:
    ORA-07445: exception encountered: core dump [koksspac()+211] [SIGSEGV] [Address not mapped to object] [0x48] [] []
    Can somebody help me ?

    I don't agree that the result (ora-7445, which is in fact an internal error) should occur in any circumstances.
    but, the platform isn't supported. so you don't have anywhere to go but to rewrite the sql and see if that works.
    if your question is answered, please mark the question as answered!

  • ORA-00600: internal error code, arguments: [17182], [0xFFFFFFFF7B7C0D60], [

    Dears;
    any one know about this error
    ORA-00600: internal error code, arguments: [17182], [0xFFFFFFFF7B7C0D60], [], [], [], [], [], []

    Hi user;
    ORA-00600: internal error code, You are gettion oracle internal error(ORA 600) which mean you could need to work wiht oracle support team. Please see below note, if its not help than i suggest log a sr:
    Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
    Regard
    Helios

Maybe you are looking for

  • Airport and iMac

    My iMac is a 1.83 GHz Intel Core 2 duo, 17" screen. What Airport product or products do I require to make my iMac wireless? Thank You, Chuck

  • Not picking up DHCP info from Windows wireless network

    Hey all, I posted once before and received zero replies, so here's hoping the second time is the charm. I have a building using HP ProCurve 420A wireless access points. There's a primary SSID that Powerbook users can see properly using Airport. The s

  • RE-POST: different request, same method

    Hi: Sorry, I have to re-post as Anamitra acquired my thread. :) I have a strange requirement. It is to expose a session bean method that could take different xml inputs. For example: TestBean exposes testMethod(String xmlstr) xmlstr could be of schem

  • Loadjava and jpub in web service using UTL_DBWS giving errors - Help Please

    Hi all, Solicit your help in the below-mentioned scenario. I am trying to access some published web services from 9.2.0.1.0 RDBMS using UTL_DBMS API. I have accomplished the same using UTL_HTTP. I have followed the instructions specified in: 'http://

  • G/L acount edit status in MIRO

    Hi I am doing a PO for a material without master record. I put account assignment category 'Cost center'  and assigned a G/L account to this line item. I did the MIGO. Now while doing MIRO I want to post this item to another G/L account. But in MIRO