ORA-7445 when trying to call a function over JDBC

Hi,
We are trying to call a PL/SQL stored function which is in a package. When we call the procedure with SQLPlus or something different, it works fine, no error occurs. But when we try to call it over jdbc, we gat the following error plus an ORA-07445 error in the alert log. (running 8.1.7.4.0 on SunOS 5.8)
UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:05:662 DEBUG Alert : Connection--Connection recovered--NO_ALERT--1044342009152
UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:05:662 DEBUG Operation : Customer Update
UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:05:682 DEBUG Unique Id : 1123839
UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:09:998 ERROR Exception MessageNo more data to read from socket
UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:09:998 ERROR Exception Code17410
UDBAdapter.UDBAdapter : 2003 Feb 04 09:04:09:998 ERRORjava.sql.SQLException: No more data to read from socket
The alert log error is as follows :
ORA-07445: exception encountered: core dump [kolcpcpy()+168] [SIGBUS] [Invalid
address alignment] [2147484761] [] []
Any help would be appreciated. Best regards.
Ogun

Hi Ogun,
The "oerr" utility for your error code gives the following output:
07445, 00000, "exception encountered: core dump [%s] [%s] [%s] [%s] [%s] [%s]"
// *Cause: An OS exception occurred which should result in the creation of a
// core file. This is an internal error.
// *Action: Contact your customer support representative.
Excuse the silly, obvious questions, but
* have you examined the core dump?
* have you contacted your customer support representative?
* have you searched the "MetaLink" web site?
http://metalink.oracle.com
If you care to post the part of your java code that is causing the problem -- I may be able to help you.
Good Luck,
Avi.

Similar Messages

  • ORA-06502 when trying to call a function inside my report

    Hi guys,
    I have the following code in a function to get my open bal for a field in my report but I am getting ORA-06502 every time I try to run it.
    Does any one have any idea as why?
    ================================
    function CF_OPNE_BALFormula return Number is
    v_bal number;
    v_period char;
    v_prv_period char;
    BEGIN
    v_period := to_char(last_day(:p_date_From),'RRRRMM');
    if substr(v_period,5,2) = '01' then
    v_prv_period := to_char(to_number(substr(v_period,1,4))-1) ||'13';
    else
    v_prv_period := to_char(to_number(to_char(:p_date_From,'YYYYMM')-1));
    end if;
    v_bal := csh_acc_pkg.csh_get_acc_bal(:p_own_id,:P_GLA_acc_num,v_prv_period,'F','ACC');
    return(v_bal);
    EXCEPTION
    WHEN NO_DATA_FOUND THEN NULL;
    END;
    ====================================================
    Thanks
    Hali

    Try using varchar2 with length specified instead of char in the variable declarations.

  • ORA-24777 when trying to call multiple Oracle SPs...

    I had a SP in Oracle that called another SP in a SQL Server DB via DBLink. I was calling the Oracle SP from VB.NET (3.5) and because of transaction commiting I was not able to do this, so I removed the SQL SERVER SP call from inside the Oracle SP. However, I still get a ORA-24777 error: use of non-migratable database link not allowed.
    If I removed the reference to the other DB, why would I still get an error referencing the DBLINK?
    I'm using Oracle 10.2 and VB.NET (3.5).
    old SP CODE:
    I have a package called USP_VALIDATION
    In the package body, I was calling BATCH(Queue, RefNo) [a procedure in USP_VALIDATION]
    In this BATCH procedure, I would call SP_GET_BILLING_OPTION_TCIS(accNo, lclBillingOption) [note TCIS is the SQL DB and lclBillingOption would be the TCIS billing option]
    ... do something with lclBillingOption
    I changed this to the following:
    In the package body, I now call BATCH(Queue, RefNo, BillingOption)
    In this new BATCH procedured, I now DON'T call SP_GET_BILLING_OPTION_TCIS as I already retrieved it first before I call USP_VALIDATION in the .NET code
    ... do something with the BillingOption passed in as a parameter when calling BATCH.
    What I'm really trying to do is make sure that the transaction commitment/rollback is handled correctly in the following senario.
    What happened before was because the one SP was calling another SQL database via DBLINK, it was not working correctly. So we removed the DBLINK and now call the SQL database before we do any action with the Oracle SPs.
    Here is my code in .NET:
    Public Function EnrollElectricCustomer(ByVal EnrollParameters As IEnrollmentParameters) As IEnrolleSearch Implements Interfaces.IEnrollmentManager.EnrollElectricCustomer
            Dim dacRCES As New Dac.RC.EnrolleeDataService()
            Dim dacRCAS As New Dac.RC.AccountDataService()
            Dim oServiceType As IServiceType = New ServiceType(ServiceTypeEnum.Gas)
            Dim dacCSS As New Dac.Css.CssCustomerAccount
            Dim oBillingOption As IBillingOption = Nothing
            Dim business As New AccountManager
            Dim WorkQID As Long = 0
            Dim enrolleeSearch As EnrolleeSearch = Nothing
            Dim MainTranScope As TransactionScope = New TransactionScope(TransactionScopeOption.RequiresNew)
            Try
                EventLog.WriteEntry("RCIS", "Access --> EnrollElectricCustomer")
                ' comment - here I go to SQL Server to get the Billing Option instead of doing it thru DBLINK
                oBillingOption = dacRCAS.GetCurrentBillingOption(EnrollParameters.CssAccountNumber, oServiceType)
                Using MainTranScope
                    'first save the Enrollment record to the Enroll Queue
                    WorkQID = dacRCES.SaveElectricEnrollee(EnrollParameters)
                    'need to put account number needed into a collection
                    Dim oColAccounts As New Generic.List(Of IAccountRefreshRequests)
                    Dim oColCSSAccounts As New Generic.List(Of ICustomerAccount)
                    Dim oAccount As New AccountRefreshRequests
                    Dim oCustomerAccount As ICustomerAccount
                    Dim refreshstring As String = String.Empty
                    oAccount.CSSAccountNumber = EnrollParameters.CssAccountNumber
                    oAccount.CSSAccountNumberNoCheckDigit = EnrollParameters.CssAccountNumber.Substring(0, 14)
                    oAccount.CSSCheckDigit = EnrollParameters.CssAccountNumber.Substring(14, 1)
                    oAccount.ServiceType.CodeString = "E"
                    Dim rStatus As New RefreshStatus
                    rStatus.Code = StatusEnum.NewAccount
                    oAccount.Status.CodeString = rStatus.CodeString()
                    oColAccounts.Add(oAccount)
                    'call CSS passing in collection of account(s) and returning back collection of account(s)
                    oColCSSAccounts = dacCSS.GetCssAccountInfo(oColAccounts)
                    oCustomerAccount = New CustomerAccount
                    oCustomerAccount = oColCSSAccounts.Item(0)
                    refreshstring = business.BuildRefreshString(oCustomerAccount)
                    dacRCES.RefreshElectricAccount(refreshstring)
                    'once refreshed, we need to also run VALIDATION on this enrollent record...
    *' NOTE THAT THIS SP used to CALL SQL via DBLINK but no longer does....*               
                    dacRCES.ValidateElectricEnrollment(WorkQID,oBillingOption)
                    'once validated, we also have to submit the record....
                    dacRCES.SubmitElectricEnrollment(WorkQID)
                    MainTranScope.Complete()
                End Using
                If WorkQID > 0 Then
                    'now we need to retrieve the account enrollment record...
                    enrolleeSearch = dacRCES.FindEnrolleeByEnrollID(WorkQID, ServiceTypeEnum.Electric)
                End If
            Catch ex As Exception
                SendEmail.SendErrorEmail("EnrollElectricCustomer --> " & EnrollParameters.CssAccountNumber, ex.Message)
                RcCommon.WriteExceptionToLog(ex)
                Throw
            End Try
            Return enrolleeSearch
        End FunctionI'm concerned that if any one of the various calls fails, I want to rollback the ENTIRE transaction. Right now I
    a) insert the row into a table in Oracle,
    b) get detailed information on this account from another database (DB2),
    c) refresh the data in the Oracle DB on this account,
    d) validate the record added (business rules) and then when all done,
    e) to submit the account (which changes statuses for later use).
    If I insert the record but it fails at step d say, I want to rollback everything and remove the record from the Oracle table...
    Edited by: userLynx on Oct 17, 2012 6:37 AM

    EDIT1:
    You posted an edit including code while I was typing original response.
    You may find the following My Oracle Support note helpful. It applies to ODP.NET as well.
    ORA-24777 When Selecting Across a Database Link With Microsoft OLE DB Provider for Oracle [ID 397555.1]
    Just to confirm - is the database link used at all now?
    I know you said that the stored procedure is no longer called, but is the link still used for anything else?
    Also, do you have a call stack from when the exception is raised?
    Edited by: Mark Williams on Oct 17, 2012 9:53 AM

  • ORA-03113 when trying to connect to database

    RDBMS Version:: 9.2.0.6
    Operating System and Version:: Win2003 Small Business Server
    Error Number (if applicable):: ORA-03113
    Server Net Version:: 9.2.0.6
    Client Operating System and Version:: Solaris10
    Client Net Version:: 2.1.3
    ORA-03113 when trying to connect to database
    I've currently a 7.1.3 client on SUN Solaris (5.10 Generic_118844-26 i86pc i386 i86pc) where I want to connect to the 9.2.0.6 database on a Win2003 Server hardware.
    When i try to connect via SQL*Plus (Release 3.1.3.4.1), I get ORA-03113. Looking into the listener resp. alertfile on the server, I can see that the connectiorequest is recognized, but immediately answered by an ORA-0600, producing also trc-files.
    listener: 25-MAI-2007 09:37:23 * (CONNECT_DATA=(SID=HTASQL)(CID=(PROGRAM=)(HOST=eklvpa)(USER=sat250))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.17.233.3)(PORT=32790)) * establish * HTASQL * 0
    alert: ORA-00600: internal error code, arguments: [12333], [26], [0], [115], [], [], [], []
    Activating traces on the client-side showed the following errors:
    -<ERROR>- ntus2err: sd=8, op=1, resnt[0]=511, resnt[1]=2, resnt[2]=0
    -<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0
    -<ERROR>- nsopen: unable to open transport
    -<ERROR>- nsprecv: transport read error
    -<ERROR>- nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0
    -<ERROR>- osnqrc: wanted 1 got 0, type 0
    -<ERROR>- osnqper: error from osnqrc
    -<ERROR>- osnqper: nr err code: 0
    -<ERROR>- osnqper: ns main err code: 12537
    -<ERROR>- osnqper: ns (2) err code: 12560
    -<ERROR>- osnqper: nt main err code: 507
    -<ERROR>- osnqper: nt (2) err code: 0
    -<ERROR>- osnqper: nt OS err code: 0
    -<ERROR>- osnqsm: send-break: failed to send OOB break...
    -<ERROR>- osnqper: error from send-marker
    -<ERROR>- osnqper: nr err code: 0
    -<ERROR>- osnqper: ns main err code: 12583
    -<ERROR>- osnqper: ns (2) err code: 0
    -<ERROR>- osnqper: nt main err code: 0
    -<ERROR>- osnqper: nt (2) err code: 0
    -<ERROR>- osnqper: nt OS err code: 0
    -<ERROR>- osnqbr: returning 3113
    Can anybody help me in determining the problem ? Is there a systemtic incompatibility in connecting a 7.1.3 client to a 9.2 (or even higher) database ?

    Thanks for your reply.
    But the funny thing on this compatibility issues is, that this configuration worked before. The only thing we did, was to setup the client-PC on a new hardware with also a new operating system (upgrading from Solaris 5.8 to 5.10). And from that time we encountered this problem.
    Are there any OS-related problems known or better to say: is (was) ORACLE 7.1.3 supported on Solaris 5.10 ? Should we look for any patches which might help us ?

  • When trying to use viber a) viber icons in the contacts do not appear b) when trying to call other viber users receive notification that users have to download viber first c) when other viber users try to contact they are notified the my vers. needs updat

    When trying to use viber a) viber icons in the contacts do not appear b) when trying to call other viber users receive notification that users have to download viber first c) when other viber users try to contact they are notified the my vers. needs updat

    A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
    *There has got to be a simpler way.*
    I hope you're right, but I don't think there is a simpler way.
    BACKUP:  It also appears that the only way I can back up the catalog is to shut down LR.  Really?!
    Yes, really

  • Why do I get a two tone beeping sound when trying to call my wife's Iphone 5c?  Call does not go through.

    Has anyone ever gotten a two tone beeping sound when trying to call an Iphone on the Verizon network?  The call never connects, just the beeping sound.

    I would try deleting her contact and then re-adding it.

  • Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?

    Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?

        Lmercer81,
    Thanks for the update! Let's continue to take a closer look. What model phone do you have? Do you have any bars of signal on the device? Has this effected data or text? Are you able to receive incoming calls?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • When I use Call Library Function Node in real time, is the DLL loaded once for all or load every time it is called?

    When I use Call Library Function Node in real time, is the DLL loaded once for all or load every time when it is called?
    I have a time critical real time application, in which I use a piece of DLL function developed by C++.  It is OK?  Could any senior developer assure me?
    Thank you in advance.
    Solved!
    Go to Solution.

    qing_shan61 wrote:
    When I use Call Library Function Node in real time, is the DLL loaded once for all or load every time when it is called?
    Once
    qing_shan61 wrote:
    I have a time critical real time application, in which I use a piece of DLL function developed by C++.  It is OK?
    OK
    Be sure that all DLL calls are thread safe (do not perform calls in UI thread).
    Also for real-time application you need real-time OS.
    Andrey.

  • File not found when trying to call a dll on LabVIEW Real Time machine

    I have a dll called "DLLRTTEST" that I've written, and have succesfully called on my host machine.  I'm now attempting to call this dll from a vi that is located on my real time computer.  Currently I get an "Error 7 occurred at Call Library Function Node in DLLRTTEST.vi." message upon execution
    In the attached screenshot I'm trying to ensure that the vi I'm running is in fact located on the real time system.  I then use a "Check if File or Folder Exists.vi" to confirm that the dll that I'm about to call does exist on the real time system as well.  However, I still receive an "error 7 file not found" error from the Call Library Function Node.
    Any help is appreciated.
    Solved!
    Go to Solution.
    Attachments:
    DLL_Call_Screenshot.png ‏61 KB
    DLL_Call_Screenshot.png ‏61 KB

    As nathand already mentioned, depending on your C toolchain your DLL will depend on other DLLs. Usually the according msvcrtXX.dll that matches your Visual C version, if you use Visual C, other runtime DLLs if you use a different C environment. These runtime DLLs are even necessary if you do not call anything in any of your functions, since the DLL makes various initialization steps when it gets loaded and that references some C runtime functions nevertheless. Compiling and linking the DLL with static C runtime is usually also not a clean solution since the linked in C runtime will then reference Windows APIs that are not available on LabVIEW RT.
    Depending on your version of LabVIEW RT you will have some mscvrtxx.dll files in your system directory but it will be an older one than from the latest Visual Studio version. If you can compile your DLL with that Visual Studio version then you should be fine, but could possibly run into new problems if you later upgrade to a newer LabVIEW RT version. Installing the C runtime distributables from newer Visual Studio versions is unfortunately also not a solution, since it references many (undocumented) Windows API functions that are not available in LabVIEW RT.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Security exception when trying to call a DLL from an applet

    Hi all,
    I really hope someone out there can help me. I'm trying to call a windows DLL from an applet but always get some error when the call to the DLL comes. If I run it on the command line (calling a dummy main function that only calls the dll) I don't get any error. However, with the -Djava.security.manager, I get an ExceptionInitialiserError. When running it in a browser, I seem to get any of three errors, the above, securityAccessControlException (as I was expecting) and even NoClassDefFoundError.
    I realise of course that this has to do with the permissions in effect but nothing seems to happen when I change the policy file, so I have to feeling that I'm chaning the wrong file. The one I'm using is the one the JRE entry in the registry is pointing to, Java Runtime Environment->CurrentVersion...
    I even tried giving everything in the applet's directory AllPermission.
    So what I'm wondering is this. Is there any way to check if your policies are actually working and when you update the files, what do you need to do to make the changes take effect?
    Best regards,
    G�sli

    I have the same problem. Have you solved your problem, if so please let me know what the solution is.
    Einar �rn

  • CALL_FUNCTION_REMOTE_ERROR when trying to call Sender RFC

    I am trying to use the sender RFC adapter without much luck.  I have written a small ABAP program to call the function - it contains the lines:
    call function 'mi_rfc_check_picking'
    destination 'ZXI-DEV'
    When I run this, I get an error "CALL_FUNCTION_REMOTE_ERROR". 
    "JCO.Server could not find server function 'mi_rfc_check_picking'"
    I have not been able to find any clear documentation that specifies what the function name should be set to - mi_rfc_check_picking is the name of my sender message interface as defined in XI.  I have tried putting this value in upper and lower case without luck.
    In component monitoring in XI, under the RFC sender I get the following error message:
    - Error: 2006-08-16 12:08:17 EST: com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: JCO.Server could not find server function 'mi_rfc_check_picking'
    Can anyone confirm what the RFC name should be?  Or offer any other suggestions to help resolve the issue?
    Regards,
    Jason

    Hi Jason,
    Also Check if the RFC is remote enabled..
    Please go through this link to know more about the same...
    http://help.sap.com/saphelp_nw04/helpdata/en/f9/3f69fd11a80b4e93a5c9230bafc767/content.htm
    Also just see if you have used BAPI_TRANSACTION_COMMIT.
    And finally, Try checking the userid auth. for RFC destination,if it has remotes access.
    To check the same, you just have to do a remote logon from SM59 transaction.
    Regards,
    Abhy

  • ORA-20001 When trying to default page element to sysdate

    Hello,
    I have a master detail with last updated in the detail that I want to autopopulate based on sysdate.
    To do that I have Tabular Form Attributes set to sysdate and default type PL/SQL Expression or function.
    The display as is set to "Display as Text(saves state).
    I would like to format the date which I do with Column Attributes and then specify the Number Data Format.
    When I click add row in the detai part of the pagethe date is displayed as desired however then I try and
    apply the changes (save the page) I get ORA-20001: Found invalid date value, please verify date format. (Row 2)
    I have tried formatting the date in the PL/SQL expression with TO_DATE(SYSDATE,'DD-MON-YYYY HH24:MI')
    with the same result.
    If I change the element to Text Field the date is saved correctly however I don't want the user to edit the
    feild.
    Any suggestions? Using APEX 4.1

    I have the same issue.
    1. DEFAULT=SYSDATE when using format mask='DD-MON-YYYY HH24:MI:SS' causes the time portion to appear but ORA-20001 when submitting the row.
    2. Since the base column datatype is DATE, a simple to_char(SYSDATE,'DD-MON-YYYY HH24:MI:SS') obviously causes ORA-01790: expression must have same datatype as corresponding expression.
    3. A to_date(to_char(SYSDATE,'DD-MON-YYYY HH24:MI:SS'),'DD-MON-YYYY HH24:MI:SS') leads to the same error: ORA-20001: Found invalid date value, please verify date format.
    Does anyone know the trick?

  • Error message when trying to call a sub vi

    Iam trying to call a sub vi into my main program when I run the main program labview gives me following error "Error-2147417848 occured at the object invoked has disconnected from its clients".
    Do any one know how to get rid of this error.
    Thank you,
    Shanth.
    Attachments:
    Doc1.doc ‏28 KB

    shanth422 wrote:
    Iam trying to call a sub vi into my main program when I run the main program labview gives me following error "Error-2147417848 occured at the object invoked has disconnected from its clients".
    Do any one know how to get rid of this error.
    Thank you,
    Shanth.
    Yes- stop invoking an object that is disconnected from its clients.  This will get rid of your "error"
    Of course, that means nothing to anything that is not a 'Windows OS'.....
    Please - post the offending code so we can analize the code and not the"error" messagases  Hmmmm
    Jeff

  • Trying to call a function from a variable in Flex 4.0 ActionScript and need some suggestions

    I am attempting to build a site map in Flex. I have my links (or will have) in a database, along with a "link." On click from a datagrid, I have an event handler where I can get the link. However, everything I have tried to use won't call the function. Ideally, I would like to call a function from from my topLevel application, and I can do that using the mx.core.FlexGlobals.topLevelApplication call. Can anyone point a fairly new Flex coder in the right direction? Thank you.

    Here is the function on the group component (simplified): -- I got this from one of my google searches. The other was using the SWFLoader, but since this is in the same application, I didn't think it was as relevant. Plus, the SWFLoader used some references that I couldn't resolve.
    private function site_click(event:ListEvent):void {
      var sURL:String=list.dataProvider[event.rowIndex].link;
       var sCommand:String="mx.core.FlexGlobals.topLevelApplication." + sURL;
       this.[sCommand]();
    This yields the error message ReferenceError: Error #1059: Property mx.core.FlexGlobals.topLevelApplication.myths_click() not found on sitemap and there is no default value.
    Whereas this works fine:
    mx.core.FlexGlobals.topLevelApplication.myths_click();
    sitemap is my component name.

  • Ora-12154 when trying to connect to database from fortran application

    I am trying to connect to database and run an simple select query to a table(without any where clause) using pro*fortran code.
    the connect strng is like
    exec sql connect :uidpwd
    where uidpwd = username/password@SID
    SID and tnsnames connect string are the same.
    The fortran (profortran) code is placed in the database server and there are no errors when make is run.
    Tnsping is working fine, also i am able to conect using sql*plus and run the same query.
    Please help
    Thanks and Regards
    Nitin

    Hi Nitin
    Thanks for the helpful! With your point I'm now Pro! Great thanks.
    By the way have your seen that?
    Files such as LISTENER.ORA, TNSNAMES.ORA, SQLNET.ORA, if configured manually, or copied and edited from earlier releases of Oracle Database may have record attributes that are incompatible with Oracle Database 10g release 2. The software cannot read such files. The required record format is stream_lf and the record attributes are carriage_control and carriage_return.
    This may result in:
    Inability to start the listener
    Services not registered with the listener
    Inability to connect to other databases
    ORA-12154: TNS:could not resolve service name
    Run the following command on each file affected:
    $ DIR/FULL filename
    An output similar to the following may be displayed:
    Record format: Variable length, maximum 255 bytes
    Record attributes: Carriage return carriage control
    If the output includes the preceding entries, then run the following command:
    $ CONVERT/FDL=SYS$INPUT filename filename
    RECORD
    CARRIAGE_CONTROL CARRIAGE_RETURN
    FORMAT STREAM_LF
    ^Z
    Otherwise herewith an interesting metalink note. Doc ID:      Note:437597.1
    Subject:      Ora-12154 When Executing Pro*Fortran Code Compiled With Oracle 10g.
    Hope this will also help you...
    Cheers
    Hubert

Maybe you are looking for

  • EPub: when exporting or viewing document to ePub it crashes

    Have deleted preferences and cashes. Problem still there. Have saved document in IDML and then to INDD. Problem still exists. In the document I have built a 2 layer button with a mouse over and click funktion. It was fine viewing the ePub (inside InD

  • VC 7.1 SP05 unspecified error - how to read the debug trace?

    Hello, I am trying to consume a enterprise service with VC 7.1 SP05. Beforehand, I have tested the parameters using WSADMIN, and I know what I have to pass. Unfortunately, when feeding the same parameters to my VC model, I get a error message, and I

  • I can't uninstall CS4

    I migrated to a new macbook pro... none of the adobe products worked... says "licensing for this product has stopped working" so I did everything listed on this page... "Error "Licensing has stopped working" | Mac OS" none of it worked and last "solu

  • Adobe Reader Prints Partial File

    .NET Application on Windows 2003 Server that generates letters to a PDF file, opens Adobe Reader and sends PDF file to network printer. Upgraded Adobe Reader 7.0 to Adobe Reader X. Since the upgrade, only part of the file prints.  File still gets gen

  • Unwanted RD Web Icon

    Is there a way to get rid of this remote desktop connection icon on my RD Web Access page? I have an unwanted connection to the server housing the applications how would i be able to get rid of that?