Oracle 10g (10.1.0.2) - Oracle CS Service and Database won't start up

Hello!
As I installed Oracle 10g (Version 10.1.0.2) I had to start "OracleCSService" which I tried, but it never finishes starting and "stays in the state of starting".
I'm working on the operation System Windows Server 2003, Enterprise Edition, 10.1.0.2
I don't know if it coheres, but I as well can't access my Database. Since I installed Oracle I haven't once been able to access.
Did anyone have the same problem and got a solution?
greetings Vera

There's a known problem with 10g on non-english Windows versions , this is documented in metalink note
OracleCsService does not start
Note:276801.1
OracleCSService is only needed for RAC and ASM configurations, the simplest workaround is to set the service to MANUAL startup, what prevents the service from starting after a reboot.
As long as you use neither RAC nor ASM database creation is independent of this service and should work. To analyze the problem more details are needed, 'it does not work' is not enough.
Werner

Similar Messages

How To Execute an Oracle 10g SProc using VS 2005, for Reporting Services

Good day! :-)
Anybody who knows the syntax for executing an Oracle Stored Proc thru ODBC connection using VS 2005 for Reporting Services? I am having a problem about this.
I am using the ODBC connection because VS 2005 does not support Oracle Database 10g in its Oracle Database Connection feature (only 7.3, 8i, and 9i), that's y.
While using MS SQL Server 2000, I never encountered any problem. But using Oracle Database 10g, I find it hard to call the stored procedures, an error is generated everytime.
Please click the link below for the screenshots:
http://www.geocities.com/vrcode2/oraError.JPG
http://www.geocities.com/vrcode2/storedProc.JPG
Please help...thank you so much.
Francis

I'll give you updates about the use of the MS SQL Server Reporting Services with VS 2005 and Oracle, this might be helpful for those who will encounter this same ctuation in the future.
I have discovered that if you're going to connect thru ODBC, even if the connection is successful, the user is still prompted to input a password, which should not be the case when using the Reporting Services. Another thing to take note is the issue about REF CURSOR, we're going to have problems with this. And also the syntax on how you're going to call the stored procedures (with or without input parameters).
With modifications made through Oracle Net Manager, and I tried AGAIN connecting through "Oracle (client)" feature of VS 2005 (even if the list only include Oracle 7.3, 8i, and 9i that are supported) with some changes also, you'd still be able to generate correct data with that solution. If the configuration is correct, you just need to call the stored procedure (with or without input parameter), you won't have any problems about the correct syntax.
I suppose VS 2005 was released earlier than Oracle 10g, that's why 10g wasn't included If ever u'd encounter the same ctuation like mine, and u need the details on how to connect, do not hesitate to ask me.

CONTENT SERVER SETUP ON ORACLE 10G IAS (10.1.3) oracle E-business R12.1.1

Hi Experts,
Quick one -
I have been requested to Integrate the CONTENT SERVER SETUP ON ORACLE 10G IAS (10.1.3) with
oracle E-business SUit R12.1.1. Please also let me know do we have to apply any patches on the
E-business Suit for Integrating Oracle Content Server setup on Oracle 10g IAS 10.1.3.
Your quick action in this regards will be highly appreciated
Please advise.
Regards
Mohammed.

Hi Mohammed,
You can find all the patches/steps in these docs.
Oracle Learning Management Content Server setup on Oracle 10gAS - Releases 11i and 12 [ID 427311.1]
Utilizing Content Servers with Oracle Learning Management [ID 374677.1]
How Does One Obtain Oracle SCORM Adapter Files For Release 12 (R12)? [ID 457538.1]
Oracle SCORM Adapter for Oracle Learning Management [ID 331572.1]
How To Verify Setup Of SCORM Adapter For Learning Management ? [ID 1172599.1]
Installing SCORM Compliant Content on Oracle Learning Management [ID 374715.1]
Understanding And Troubleshooting Oracle Learning Management Content Server [ID 754454.1]
Oracle Learning Management Release 12 Known Issues [ID 405319.1]
Oracle Learning Management Documentation Resources, Release 12 [ID 397168.1]
Learning Management (formerly Training Administration)
http://docs.oracle.com/cd/B53825_08/current/html/doclist.html#Learning%20Management_p
Thanks,
Hussein

Oracle 10g client not connecting to Oracle 8i server

I have oracle 8i server already installed. I downloaded Oracle 10g client recently. I installed it on one machine and trying to connect to 8i server. I used TNSnames.ora which was already present on the machine. After entering the username, password and service name in SQL plus, I got a error saying server version not suported. Does 10g client not support 8i server or am I doing something wrong ?

There is an 8.1.7.4 patchset for Windows.
If you take a look at the Instant Client forum, there are some discussions on this where one of the Oracle product managers (Mr. Jue) has chimed in. At present, only connections to 8.1.7.4 and higher are supported. It is expected that the first 10g patchset will fix this bug and allow connections to 8.1.7.0 and above databases.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Problem in oracle 10g(client) to server is oracle 8i

i want to coneect oracle 10g is client to oracle 8i is server. so i am getting problem.
how to connect oracle 10g (client) to oracle 8i server.please give me steps.

so i am getting problem
Apart from the fact it doesn't work - which error message do you recieve??
Dim

Runnig forms in oracle 10g after migrating them from oracle 6i

Guyz ....i have developed forms in oracle 6i and when i presented them to the my manager he says that he wants them to be web based.....arghhhh.!!!!!! shud have told me at the beginning itself....anyways i downloaded the forms 10g from oracle website and migrates my forms from 6i to 10g ....
1.The forms are getting compiled and i can run them on my laptop.. i wanna noe whats the procedure to run them on other system .....the port number is 8889
I mean running them on a web on some other LP or system.???
2.And my 2nd problem is that ...The records are not being saved in 10g as in 6i. I created the forms in 6i using the data block wizard and set the block accordingly as told by u people in this forum

Look at the existing formsweb.cfg configuration file located in your <DEVSUITE_HOME>/forms/server folder. It allows you to create different sections to start your Forms applications.
For instance, if you create a application_1 section, give this name in your URL.
Francois

Error when installing oracle 10g on OEL4..(oracle enterprise linux )

Hi everyone,
i am getting this error when i run ./runInstaller
[oracle@localhost database]$ ./runInstaller
./runInstaller: line 52: /root/Desktop/10201_database_linux32/database/install/.oui: Permission denied
But it has all the permissions (read,write,execute) for owner,groups,others.Do i have to give any more permissions.
File owner of that file : oracle
file group: oinstall
i used the following commands when i created the groups.
/usr/bin/groupadd oinstall
/usr/bin/groupadd dba
/usr/bin/ useradd-m-g oinstall -G dba oracle
what more permissions do i have to give to that ./runInstaller.
please helpme
sandeep

hi everyone,
Please help me.I am not able to figure out what am i doing wrong.I am getting the permission denied error when i am running the ./runinstaller.But it has all the read,write execute permissions
[root@localhost ~]# ls -ltr
total 120
-rw-r--r-- 1 root root 32283 Jan 3 18:36 install.log.syslog
-rw-r--r-- 1 root root 57519 Jan 3 18:36 install.log
-rw-r--r-- 1 root root 1446 Jan 3 18:36 anaconda-ks.cfg
drwxrwxrwx 3 oracle oinstall 4096 Jan 3 21:40 Desktop
[root@localhost ~]# su oracle
[oracle@localhost root]$ ls -ltr
ls: .: Permission denied
[oracle@localhost root]$ cd Desktop
bash: cd: Desktop: Permission denied
[oracle@localhost root]$ exit
[root@localhost ~]# cd Desktop
[root@localhost Desktop]# su oracle
[oracle@localhost Desktop]$ ls
10201_database_linux32
[oracle@localhost Desktop]$ ls -ltr
total 8
drwxrwxrwx 3 oracle oinstall 4096 Jan 3 21:38 10201_database_linux32
[oracle@localhost Desktop]$ cd 10201_database_linux32/
[oracle@localhost 10201_database_linux32]$ cd database/
[oracle@localhost database]$ ls -ltr
total 52
drwxrwxrwx 9 oracle oinstall 4096 Jan 3 21:38 doc
-rwxrwxrwx 1 oracle oinstall 1327 Jan 3 21:38 runInstaller
drwxrwxrwx 2 oracle oinstall 4096 Jan 3 21:38 response
drwxrwxrwx 5 oracle oinstall 4096 Jan 3 21:38 install
-rwxrwxrwx 1 oracle oinstall 5213 Jan 3 21:40 welcome.html
drwxrwxrwx 9 oracle oinstall 4096 Jan 3 21:40 stage
[oracle@localhost database]$ ./runInstaller
./runInstaller: line 52: /root/Desktop/10201_database_linux32/database/install/.oui: Permission denied
Please tell me what shall i do to run the installer.pleaseeeeee
thanks
sandeep

Experiences with Oracle 10g/11g RAC on VMWare Fusion for Macbook and OEL 5

Folks,
I recently purchased a new Macbook Pro laptop computer to use for demos and testing with Oracle RAC. I am using VMWare Fusion for Mac OS X to setup new VM machines with Oracle 11g.
Thus far, I can setup single instance Oracle 11g database fine with OEL 5 (32 bit OS) as the guest OS. The problem that I keep running into due to the limitation with VMWare Fusion product is that I am not able to edit the VMWare network settings to allow multiple VM machines to communicate with each other. The second main issue that I currently face is that VMWare Fusion does not allow you to setup shared disks which are a requirement to install and configure an Oracle RAC environment. I came to the realization that after searching forums online that
one must setup a third VM machine to act as an NFS or iSCSI filer system to present to the other VM hosts for the shared storage requirement for RAC. Has anyone been able to do all
of this successfully with VMWare Fusion on a Macbook ? If so, I would definitely be interested in finding out how you did this. Specifically the following:
1. Network configuration for each VMWare Fusion guest OS machine
2. Shared storage ie) NFS or OpenFiler VM machine
Regards,
Ben

Hi,
I'm facing the same issue.. If your issue is fixed..could you please let me know?
I'm trying to configure 11g RAC with OPenfiler and got stuck here.
Regards,
Kumar

Oracle 10g Performance between (10.2.0.3.0 and 10.2.0.5.0): Platform solari

Hello all,
We have built our new UAT (10.2.0.5.0) using disk copy from old UAT(10.2.0.3.0). Ystem stats are all up to date. But one of the query takes very long time almost 6 hours in New UAT. But old UAT it takes only 20 minutes .
Can anybody tell why or what i shoudl check for?

Plan@OLD UAT
===============
1 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_3 . The index was scanned in ascending order..
2 The rows from step 1 were inserted into using direct-load insert.
3 Rows were retrieved using the unique index SCHEMANMMAP.XPK_SOURCE_SYSTEM_FEED .
4 Rows from table SCHEMANMMAP.SCHEMANMF_SOURCE_SYSTEM_FEED were accessed using rowid got from an index.
5 Every row in the table SYS.SYS_TEMP_0FD9D6651_E9A50186 is read.
6 A view definition was processed, either from a stored view WEIJ. or as defined by steps 5.
7 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_4 . The index was scanned in ascending order..
8 For each row retrieved by step 6, the operation in step 7 was performed to find a matching row.
9 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
10 A view definition was processed, either from a stored view WEIJ. or as defined by steps 9.
11 Every row in the table SYS.SYS_TEMP_0FD9D6651_E9A50186 is read.
12 A view definition was processed, either from a stored view WEIJ. or as defined by steps 11.
13 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_5 . The index was scanned in ascending order..
14 For each row retrieved by step 12, the operation in step 13 was performed to find a matching row.
15 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
16 A view definition was processed, either from a stored view WEIJ. or as defined by steps 15.
17 For each row retrieved by step 10, the operation in step 16 was performed to find a matching row.
18 Every row in the table SYS.SYS_TEMP_0FD9D6651_E9A50186 is read.
19 A view definition was processed, either from a stored view WEIJ. or as defined by steps 18.
20 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_5 . The index was scanned in ascending order..
21 For each row retrieved by step 19, the operation in step 20 was performed to find a matching row.
22 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
23 A view definition was processed, either from a stored view WEIJ. or as defined by steps 22.
24 For each row retrieved by step 17, the operation in step 23 was performed to find a matching row.
25 One or more rows were retrieved using index SCHEMANMERR.XIE_BATCH_CONTROL_6 . The index was scanned in ascending order..
26 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
27 For the rows returned by step 26, filter out rows depending on filter criteria.
28 Return all rows from steps 24, 27 - including duplicate rows.
29 A view definition was processed, either from a stored view WEIJ. or as defined by steps 28.
30 For each row retrieved by step 4, the operation in step 29 was performed to find a matching row.
31 The rows were sorted to support the join at step 37.
32 Rows were retrieved from concatenated index Partitions determined by Key Values without using the leading column(s).
33 Rows from table Partitions determined by Key Values were accessed using rowid got from a local (single-partition) index.
34 PARTITION LIST SINGLE
35 PARTITION RANGE ALL
36 The rows were sorted to support the join at step 37.
37 Join the sorted results sets provided from steps 31, 36.
38 Rows were retrieved using the unique index Partitions determined by Key Values.
39 Rows from table Partitions determined by Key Values were accessed using rowid got from a local (single-partition) index.
40 PARTITION LIST SINGLE
41 A range of partitions of steps 40 were accessed..
42 For each row retrieved by step 37, the operation in step 41 was performed to find a matching row.
43 Rows were retrieved using the unique index SCHEMANMADM.XPK_INSTRUMENT .
44 Rows from table SCHEMANMADM.INSTRUMENT were accessed using rowid got from an index.
45 For each row retrieved by step 42, the operation in step 44 was performed to find a matching row.
46 One or more rows were retrieved using index Partitions determined by Key Values. The index was scanned in ascending order..
47 PARTITION LIST SINGLE
48 A range of partitions of steps 47 were accessed..
49 For each row retrieved by step 45, the operation in step 48 was performed to find a matching row.
50 Rows from table SCHEMANMADM.INSTRUMENT_BALANCE were accessed using rowid got from a local (single-partition) index.
51 Every row in the table SCHEMANMINT.SCHEMANMF_ACCOUNTING_PERIOD is read.
52 The result sets from steps 50, 51 were joined (hash).
53 Every row in the table SYS.SYS_TEMP_0FD9D6651_E9A50186 is read.
54 A view definition was processed, either from a stored view WEIJ. or as defined by steps 53.
55 For each row retrieved by step 52, the operation in step 54 was performed to find a matching row.
56 The rows from step 55 were inserted into using direct-load insert.
57 Every row in the table SYS.SYS_TEMP_0FD9D6652_E9A50186 is read.
58 A view definition was processed, either from a stored view WEIJ. or as defined by steps 57.
59 Rows were retrieved using the unique index Partitions determined by Key Values.
60 Rows from table Partitions determined by Key Values were accessed using rowid got from a local (single-partition) index.
61 PARTITION LIST SINGLE
62 A range of partitions of steps 61 were accessed..
63 For each row retrieved by step 58, the operation in step 62 was performed to find a matching row.
64 Every row in the table SYS.SYS_TEMP_0FD9D6652_E9A50186 is read.
65 A view definition was processed, either from a stored view WEIJ. or as defined by steps 64.
66 Return all rows from steps 63, 65 - including duplicate rows.
67 TEMP TABLE TRANSFORMATION
68 Rows were returned by the SELECT statement.
++++++++++++++++++++++++++++++++++
Plan@NEW UAT
===============
1 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_3 . The index was scanned in ascending order..
2 The rows from step 1 were inserted into using direct-load insert.
3 Rows were retrieved using the unique index SCHEMANMMAP.XPK_SOURCE_SYSTEM_FEED .
4 Rows from table SCHEMANMMAP.SCHEMANMF_SOURCE_SYSTEM_FEED were accessed using rowid got from an index.
5 Every row in the table Partitions determined by Key Values is read.
6 PARTITION LIST SINGLE
7 PARTITION RANGE ALL
8 For each row retrieved by step 4, the operation in step 7 was performed to find a matching row.
9 Rows were retrieved using the unique index Partitions determined by Key Values.
10 Rows from table Partitions determined by Key Values were accessed using rowid got from a local (single-partition) index.
11 PARTITION LIST SINGLE
12 A range of partitions of steps 11 were accessed..
13 For each row retrieved by step 8, the operation in step 12 was performed to find a matching row.
14 Rows were retrieved using the unique index SCHEMANMADM.XPK_INSTRUMENT .
15 Rows from table SCHEMANMADM.INSTRUMENT were accessed using rowid got from an index.
16 For each row retrieved by step 13, the operation in step 15 was performed to find a matching row.
17 One or more rows were retrieved using index Partitions determined by Key Values. The index was scanned in ascending order..
18 PARTITION LIST SINGLE
19 A range of partitions of steps 18 were accessed..
20 For each row retrieved by step 16, the operation in step 19 was performed to find a matching row.
21 Rows from table SCHEMANMADM.INSTRUMENT_BALANCE were accessed using rowid got from a local (single-partition) index.
22 Every row in the table SCHEMANMINT.SCHEMANMF_ACCOUNTING_PERIOD is read.
23 The result sets from steps 21, 22 were joined (hash).
24 Every row in the table SYS.SYS_TEMP_0FD9FC8FB_DC4EE804 is read.
25 A view definition was processed, either from a stored view WEIJ. or as defined by steps 24.
26 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_4 . The index was scanned in ascending order..
27 The result sets from steps 25, 26 were joined (hash).
28 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
29 A view definition was processed, either from a stored view WEIJ. or as defined by steps 28.
30 Every row in the table SYS.SYS_TEMP_0FD9FC8FB_DC4EE804 is read.
31 A view definition was processed, either from a stored view WEIJ. or as defined by steps 30.
32 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_5 . The index was scanned in ascending order..
33 The result sets from steps 31, 32 were joined (hash).
34 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
35 A view definition was processed, either from a stored view WEIJ. or as defined by steps 34.
36 For each row retrieved by step 29, the operation in step 35 was performed to find a matching row.
37 Every row in the table SYS.SYS_TEMP_0FD9FC8FB_DC4EE804 is read.
38 A view definition was processed, either from a stored view WEIJ. or as defined by steps 37.
39 One or more rows were retrieved using index SCHEMANMERR.XAK_BATCH_CONTROL_5 . The index was scanned in ascending order..
40 The result sets from steps 38, 39 were joined (hash).
41 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
42 A view definition was processed, either from a stored view WEIJ. or as defined by steps 41.
43 For each row retrieved by step 36, the operation in step 42 was performed to find a matching row.
44 One or more rows were retrieved using index SCHEMANMERR.XIE_BATCH_CONTROL_6 . The index was scanned in ascending order..
45 The rows were sorted to support a group operation (MAX,MIN,AVERAGE, SUM, etc).
46 For the rows returned by step 45, filter out rows depending on filter criteria.
47 Return all rows from steps 43, 46 - including duplicate rows.
48 A view definition was processed, either from a stored view WEIJ. or as defined by steps 47.
49 For each row retrieved by step 23, the operation in step 48 was performed to find a matching row.
50 Every row in the table SYS.SYS_TEMP_0FD9FC8FB_DC4EE804 is read.
51 A view definition was processed, either from a stored view WEIJ. or as defined by steps 50.
52 For each row retrieved by step 49, the operation in step 51 was performed to find a matching row.
53 The rows from step 52 were inserted into using direct-load insert.
54 Every row in the table SYS.SYS_TEMP_0FD9FC8FC_DC4EE804 is read.
55 A view definition was processed, either from a stored view WEIJ. or as defined by steps 54.
56 Rows were retrieved using the unique index Partitions determined by Key Values.
57 Rows from table Partitions determined by Key Values were accessed using rowid got from a local (single-partition) index.
58 PARTITION LIST SINGLE
59 A range of partitions of steps 58 were accessed..
60 For each row retrieved by step 55, the operation in step 59 was performed to find a matching row.
61 Every row in the table SYS.SYS_TEMP_0FD9FC8FC_DC4EE804 is read.
62 A view definition was processed, either from a stored view WEIJ. or as defined by steps 61.
63 Return all rows from steps 60, 62 - including duplicate rows.
64 TEMP TABLE TRANSFORMATION
65 Rows were returned by the SELECT statement.

Oracle database won't start/connect

I apologize in advance if I've missed something in another forum/thread, or leave out necessary information towards solving this. I tried to be as comprehensive in my research as possible prior to posting.
Here's the story - I have a 10g 10.2.0.1.0 database on Windows XP. It was running fine, until I tried to add DBWS_UTL/10.2.0.3.0 Client... I think?, components to it in order to enable it for Web Services. I followed the tutorial at the following link:
http://www.oracle.com/technology/obe/10gr2_db_single/develop/java/java_otn.htm
... and got down to Instruction #8, just before "Calling the Web Service". It says "Note that there are no errors." Unfortunately, I did have errors... and more unfortunately, I don't still have them handy.
After some testing I realized that not only do database web services not work, but my database was no longer functioning at all. Consultation with coworkers revealed the problem to likely be tied to now having improper version matching (10.2.0.1 versus 10.2.0.3...)
So, I tried upgrading my 10.2.0.1 to 10.2.0.3... and believe I have successfully done that. Every service started up in Windows Services except for "OracleDBConsoleSID", which reported "Error 1053: The service did not respond to the start or control request in a timely fashion" right after the little green timer blocks slowly and steadily filled up to the end.
Some more experimentation with a coworker, the OracleDBConsoleSID service no longer exists in my services list, and the database still doesn't start up.
Things I've tried:
1. Checking my tnsnames.ora and listener.ora files - the proper hostnames and Oracle home are listed.
2. Rebuilding the OracleDBConsole via "emca" commands from command prompt. EMCA responds but the actual commands to reconfigure or rebuild the repository fail out because the database is not responsive.
3. Connecting via my installed applications, Enterprise Manager, SQL Plus, and Command Line - all fail the same way, Error 1034.
4. Reconfiguring/rebuilding my Listener with Net Configuration Assistant - values seem to check out, no positive results.
5. Many many other small/random things mentioned in forums here and elsewhere on the net.
I guess that's it for now, there's plenty more details I could include but I don't want to muddle the post with irrelevant information. Any ideas/help are greatly appreciated, I would just reinstall/start over but I have important data in the database that I don't want to lose.
Thanks,
Greg
Edited by: user10997705 on May 6, 2009 4:47 PM

Ok, it's apparently the entire life's history of my database. Here's the most recent complete entry for today's date:
Dump file c:\oracle\product\10.2.0/admin/SID/bdump\alert_SID.log
Thu May 07 11:58:53 2009
ORACLE V10.2.0.3.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1609M/2014M, Ph+PgF:1923M/2197M, VA:1939M/2047M
Thu May 07 11:58:53 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 142606336
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLE\PRODUCT\10.2.0\DB_2\DBS\SPFILESID.ORA
sga_target = 281018368
control_files = C:\ORACLE\PRODUCT\10.2.0\ORADATA\SID\CONTROL01.CTL, C:\ORACLE\PRODUCT\10.2.0\ORADATA\SID\CONTROL02.CTL, C:\ORACLE\PRODUCT\10.2.0\ORADATA\SID\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 125829120
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = C:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=SIDXDB)
job_queue_processes = 10
audit_file_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\SID\ADUMP
background_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\SID\BDUMP
user_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\SID\UDUMP
core_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\SID\CDUMP
db_name = SID
open_cursors = 300
pga_aggregate_target = 93323264
PMON started with pid=2, OS id=1184
PSP0 started with pid=4, OS id=1288
MMAN started with pid=5, OS id=1296
DBW0 started with pid=6, OS id=1304
LGWR started with pid=7, OS id=1316
CKPT started with pid=8, OS id=1320
SMON started with pid=9, OS id=1336
RECO started with pid=10, OS id=1348
CJQ0 started with pid=11, OS id=1356
MMON started with pid=12, OS id=1360
MMNL started with pid=13, OS id=1364
Thu May 07 11:58:54 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Thu May 07 11:58:57 2009
alter database mount exclusive
Thu May 07 11:59:02 2009
Setting recovery target incarnation to 2
Thu May 07 11:59:03 2009
Successful mount of redo thread 1, with mount id 1106751361
Thu May 07 11:59:03 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Thu May 07 11:59:03 2009
alter database open
Thu May 07 11:59:07 2009
Beginning crash recovery of 1 threads
Thu May 07 11:59:08 2009
Started redo scan
Thu May 07 11:59:10 2009
Completed redo scan
0 redo blocks read, 0 data blocks need recovery
Thu May 07 11:59:10 2009
Started redo application at
Thread 1: logseq 475, block 3, scn 18427404
Thu May 07 11:59:10 2009
Recovery of Online Redo Log: Thread 1 Group 3 Seq 475 Reading mem 0
Mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\SID\REDO03.LOG
Thu May 07 11:59:10 2009
Completed redo application
Thu May 07 11:59:10 2009
Completed crash recovery at
Thread 1: logseq 475, block 3, scn 18447405
0 data blocks read, 0 data blocks written, 0 redo blocks read
Thu May 07 11:59:15 2009
Thread 1 advanced to log sequence 476
Thread 1 opened at log sequence 476
Current log# 1 seq# 476 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\SID\REDO01.LOG
Successful open of redo thread 1
Thu May 07 11:59:16 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Thu May 07 11:59:17 2009
SMON: enabling cache recovery
Thu May 07 11:59:19 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\udump\SID_ora_1396.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Thu May 07 11:59:19 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Thu May 07 11:59:19 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_pmon_1184.trc:
ORA-00704: bootstrap process failure
Thu May 07 11:59:19 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_reco_1348.trc:
ORA-00704: bootstrap process failure
Thu May 07 11:59:19 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_smon_1336.trc:
ORA-00704: bootstrap process failure
Thu May 07 11:59:19 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_lgwr_1316.trc:
ORA-00704: bootstrap process failure
Thu May 07 11:59:20 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_ckpt_1320.trc:
ORA-00704: bootstrap process failure
Thu May 07 11:59:20 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_psp0_1288.trc:
ORA-00704: bootstrap process failure
Thu May 07 11:59:22 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_dbw0_1304.trc:
ORA-00704: bootstrap process failure
Thu May 07 11:59:22 2009
Errors in file c:\oracle\product\10.2.0\admin\SID\bdump\SID_mman_1296.trc:
ORA-00704: bootstrap process failure
Instance terminated by USER, pid = 1396
ORA-1092 signalled during: alter database open...
*******************************************************************************************

Connectivity Betwen BW And ORACLE 10g

Hi All
we are on BW 3.5, we need to pull the data from oracle 10g Server, Our BW is On Win NT and database is Oracle 9iand oracle 10g server is on Win NT. I would like to Know what steps we need to take to establish the connectivity
Here Oracle versions are different.
Pls Help

Hi,
have a look on this note: 830576
hope it help's

Displaying both Hindi and Arabic numerals in Oracle 10g PDF report

Hi….
Oracle experts told us to ask “In how many ways we can do it in oracle?” instead of asking “Can we do it in Oracle?” , I need ONE way to solve the following problem, it toke to much time and I don’t know if it can be solved !
The problem:
Can we print in - Oracle 10g reports - a PDF report with BOTH Hindi and Arabic numerals?
Well, at design time everything is fine, you can use right-to-left, left-to-right and the print preview is showing BOTH Hindi/Arabic numerals fine, but when I tried to produce it as a PDF, unfortunately its not, means its either all Hindi or all Arabic numerals !
I tried everything possible, environment variables: NLS_LANG, REPORTS_BIDI_ALGORITHM, and REPORTS_ARABIC_NUMERLS, setting Digit substitution to Context in windows regional settings, uifont.ali is modified properly according to metalink note, but nothing solved this issue!
I noticed something, when I used the DESTYPE=printer and DESNAME=PDF995 (one of the PDF printers) , it worked fine , means the problem could be in the generic PDF generator of the Oracle reports server,
But even with PDF995 you still need to feed the file name, which is not suitable for multi-user environment that need the report to be displayed via web browser.
Does anybody face this before?
Edited by: khaled.w on May 24, 2010 7:29 AM
Edited by: khaled.w on May 24, 2010 7:35 AM

Don't tell so much.
Check the following link
1. PDF Reports in Unicode / Arabic &amp; English | Oracle Community
2. OraFAQ Forum: Reports & Discoverer » Report in Arabic(pdf) (merged)
3. Arabic Report generated to text file giving Jun... | Oracle Community
Hope this helps
Hamid

How do I view Migrate Data errors - Access 2003 - Oracle 10g

I'm trying to use the SQL Developer to migrate data from an Access 2003 database to an Oracle 10g database. I followed the instructions found here:
http://www.oracle.com/technology/tech/migration/workbench/files/omwb_getstarted.html
I was able to complete every step except the actual data move. I exported the xml for the Access database, I captured the export and then ran the generation scripts on my target Oracle database (I'm using the same schema for the migration repository and the actual data). It created the tables with only one or two errors which I resolved.
Now, when I select Migration->Migrate Data, I get the dialog that appears to start 4 or 5 threads and attempts to migrate each table. They all error and do not transfer any rows. I can see that there's one error per table, but I can't see the error text. I just know that an error occurred. Is there a log somewhere or is the error displayed somewhere else? How do I know what's gone wrong?
Thanks.

I too receive unexplained error counts using the Migrate Data menu selection and unexplained failures using the Generate Data Move Scripts menu selection. Permissions granted by role or direct grants should not be a problem, but a Migrate Data error appears in the Migration Log panel at the bottom of the SQL Developer window, "Failed to disable constraints: ORA-00942 ... ". No further details available on what constraints or why the error. No other errors were detected while following the instructions found in the Oracle SQL Developer Migration Workbench Getting Started guide. SQL Developer never migrates the data from the existing Access 2000 mdb file to the newly created schema objects in Oracle 10g using either method. The following roles and privileges have been granted to both the repository owner and the target schema owner:
GRANT RESOURCE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CONNECT TO MIGRATE_USER WITH ADMIN OPTION;
ALTER USER MIGRATE_USER DEFAULT ROLE ALL;
-- 25 System Privileges for MIGRATE_USER
GRANT CREATE ROLE TO MIGRATE_USER;
GRANT ALTER TABLESPACE TO MIGRATE_USER;
GRANT ALTER ANY SEQUENCE TO MIGRATE_USER;
GRANT INSERT ANY TABLE TO MIGRATE_USER;
GRANT SELECT ANY TABLE TO MIGRATE_USER;
GRANT CREATE ANY TABLE TO MIGRATE_USER;
GRANT UNLIMITED TABLESPACE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP TABLESPACE TO MIGRATE_USER;
GRANT CREATE ANY TRIGGER TO MIGRATE_USER;
GRANT ALTER ANY ROLE TO MIGRATE_USER;
GRANT CREATE VIEW TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP USER TO MIGRATE_USER;
GRANT CREATE TABLESPACE TO MIGRATE_USER;
GRANT GRANT ANY ROLE TO MIGRATE_USER;
GRANT CREATE ANY SEQUENCE TO MIGRATE_USER;
GRANT ALTER ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TRIGGER TO MIGRATE_USER;
GRANT DROP ANY ROLE TO MIGRATE_USER;
GRANT DROP ANY SEQUENCE TO MIGRATE_USER;
GRANT UPDATE ANY TABLE TO MIGRATE_USER;
GRANT ALTER ANY TRIGGER TO MIGRATE_USER;
GRANT COMMENT ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TABLE TO MIGRATE_USER;
GRANT CREATE PUBLIC SYNONYM TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CREATE USER TO MIGRATE_USER WITH ADMIN OPTION;
-- 1 Tablespace Quota for MIGRATE_USER
ALTER USER MIGRATE_USER QUOTA UNLIMITED ON USERS;
Operating system for both Access 2000 and Oracle 10g is Windows XP PRO SP2.
Oracle SQL Developer is version 1.1.2.25 build MAIN-25.79 on Windows XP PRO SP2. All three are on the same PC.
Since only the last step failed, I created a User DSN with the ODBC administrator. Then, linked the newly created Oracle table to Access via ODBC using the DSN created. Next, I created an append query with the source being the Access table and the target being the Oracle table. I moved the data by pressing the red exclamation mark.

ORA-01722: Invalid number - error only in Oracle 10g?

While trying to insert a numeric value into a decimal column, I get this error. Hitherto, my update statements used to look fine.
Can anyone let me know if this enforcement is specific to Oracla 10g? I am running :
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Thanks in advance for your help!
Niranjan

Well, you've a blank space which isn't a number, that's why you have an error.
Please see the following example to have a default value :
SQL> create table tutu (id number, text varchar2(10));
Table created.
SQL> alter table tutu modify id default 0;
Table altered.
SQL> insert into tutu values (' ', 'NoWork');
insert into tutu values (' ', 'NoWork')
ERROR at line 1:
ORA-01722: invalid number
SQL> insert into tutu values (null,'NullValue');
1 row created.
SQL> insert into tutu (text) values ('Default');
1 row created.
SQL> insert into tutu values (1,'NonDefault');
1 row created.
SQL> select * from tutu;
        ID TEXT
           NullValue
         0 Default
         1 NonDefault
SQL> Nicolas.
Message was edited by:
N. Gasparotto

Integration b/w uccx7.0 and oracle 10g

hi,
currently i am doing integration b/w uccx7.0 and oracle 10g. i have installed the oracle client 10g . and i added the DSN in ODBC and also the test connection is succesful.. but when i mention the DSN in app admin page (Subsytem> Database). it is showing me error that some of the information is incorrect for the connection. and is not allowing me to add DSN in appadmin page of uccx 7.0.. even though i am using the same information in sqlplus to query the database from ipccx. Do i need to mention sth to make it work.
Regards
Nareh

Hi there
A few things you have to watch out for.
Firstly if you have create the DSN and able to connect to it via the ODBC its more likely that the driver was not loaded correctly.
- Remove the Driver and DNS
- Install the driver again and create the DSN and test if it works
- Reload the whole windows <----- was working on a case for 3 hours UCCX just wasn't loading the new 10g drivers reload fixed this
Now create the database connection and test.
Should this not work you can try the following:
CSCtb80893

Oracle 10g (10.1.0.2) - Oracle CS Service and Database won't start up

Similar Messages

Maybe you are looking for