Oracle 10g (aix) dbms_job dbms_scheduler delayed

Hello,
We have a procedure with a run time of +- 15 minutes that has to be finished before a certain hour (let's call it proc A).
We already have a lot of jobs (using dbms_job) running and taking all the night and the whole morning before they are terminated.
With these jobs, we know that when one of them is taking too long or failing, the other ones are stucked, and the whole chain is compromised.
We tried the dbms_scheduler for the proc A, hopping there would be no delays, but there is some delay, and this is a problem.
Is it possible to force the execution of a job while another job is already running ?
Thanks in advance,
Greg.

Hi,
Yes I think it would be better, but it will not be done right now for several reasons...
I don't know how our instance is configured, but I can sure you it is a FIFO system for our jobs, and we don't want to let several jobs running concurrently.
But the proc A has no impact on the others jobs, so we would like that job start at the time we want?
Thanks,
Greg

Similar Messages

  • Installation Solution Manager on Oracle 10g / AIX 6.1 - Oracle Patches

    Hi guys,
    I have a question.
    I'm on a project to install ERP 6.0 and I will start installing Solution Manager 7.0 EHP1, through no fault, the project is long overdue and urgently need the Solution Manager for the team project starts.
    The SAP platform is AIX 6.1 / Oracle 10.2.0.4. When I'm installing the central instance of Solution Manager, where the process to install Oracle Database Software Installation, then Current Patch Set (10.2.0.4) and lastly Required Interim Patches, which would be the point 4.7.4 of the Installation Guide SAP Solution Manager 7.0 including SAP Enhancement Package 1 on AIX - Oracle, can jump this last step (Required Interim Patches) and install these patches later ????? O is mandatory to install the Interim Patches to continue installing of SM.
    Thanks a lot.
    Desiré

    Hello Desirée
    If you take a look at the note, Oracle/SAP have change the patches policy.
    Currently there is only ONE "patch" to be installed.
    It is called a SAP patch Bundle (or something like that)
    It contains the latest PSU, and all required SAP individual patches.
    It must be installed with Mopatch.
    it has been released the 10th of this month.
    This can facilitate the task of installing patches (only one to "take care off"

  • Error while installing oracle 10g on AIX

    I am receiving the following error while installing oracle 10g on AIX..
    error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
    i am installing enterprise edition. pl help

    Hi;
    What is AIX version?
    Please see:
    Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
    AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
    "Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
    Please also check below and be sure you have all prereq. on your server:
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Regard
    Helios

  • Steps to export and import oracle 10g databse from AIX to AIX and LINUX

    Hi,
    I need the steps to export the oracle 10g database from AIX server to AIX server and LINUX server.
    Please give me all the steps as this is my first exort an import activity.
    thanks,

    For 10g there exist two ways to do so.
    1) Regular exp/imp.
    2) Data pump expdp/impdp.
    As this is your first export and import activity, relevant concept understanding is mandatory for you.
    Documentation Link
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm
    Read the chapters 1,2,3 (Data pump expdp/impdp) and 19 (regular exp/imp). Good luck.

  • How to Install oracle 10g and 11g on aix 6.1

    Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how
    Chetan
    Edited by: chetan0926 on Jan 11, 2012 2:56 AM

    Hi;
    Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how Yes you can,both version is certified
    I agree Sybrand, Please check installation guide. All your questions will be answered in it
    http://www.oracle.com/pls/db102/homepage
    http://www.oracle.com/pls/db112/homepage
    Also see:
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Regard
    Helios

  • Create a New Report Server in Oracle 10g AS(10.1.2.0.2) in IBM-AIX

    Hi Friends,
    I am using Oracle 10g AS(10.1.2.0.2)on IBM-AIX.
    I would like to create a new Report Server(standalone).Please suggest and give the Metalink Document Number as well.
    Regards,
    Arun

    Doc ID: 459177.1

  • Oracle 10g installation on AIX

    Hi,
    Could any one provide me any reference/help documents on how to install Oracle 10g software on AIX box?.
    Regards,
    Nagarjun.

    This is the installation guide for AIX:
    Oracle® Database Installation Guide
    10g Release 2 (10.2) for AIX 5L Based Systems (64-Bit)
    Part Number B19075-02
    ~ Madrid

  • Running test.rdf in oracle 10g and ibm aix 5L

    Hi,
    I am trying to run a demo test.rdf from the browser. This is in Oracle 10g and IBM AIX 5L.The report server is in-process server.
    The url is
    http://ipaddr:7778/reports/rwservlet?server=rep_igtewfux01&report=test.rdf&userid=dbuserid/dbpwd@asdb&desformat=PDF&destype=cache
    Engine rwEng-0 crashes all the time. Below is a part of the exception . Please help.
    [2005/8/26 6:19:14:20] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 98
    [2005/8/26 6:20:9:64] Exception 50125 (org.omg.CORBA.TRANSIENT: vmcid: 0x0 minor code: 0 completed: No
         at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java(Compiled Code))
         at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java(Compiled Code))
         at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java(Compiled Code))
         at oracle.reports.engine._EngineClassStub.run(_EngineClassStub.java:147)
         at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:784)
         at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
         at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
         at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
         at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
         at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
         at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
         at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
         at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:568)
    ): Internal error org.omg.CORBA.TRANSIENT: vmcid: 0x0 minor code: 0 completed: No
    [2005/8/26 6:20:9:64] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwEng-0
    [2005/8/26 6:20:9:66] Exception 50125 (org.omg.CORBA.OBJECT_NOT_EXIST: vmcid: 0x0 minor code: 0 completed: No
         at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java(Compiled Code))
         at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java(Inlined Compiled Code))
         at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java(Compiled Code))
         at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java(Compiled Code))
         at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java(Compiled Code))
         at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java(Compiled Code))
         at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:341)
         at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1216)
         at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:826)
         at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
         at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
         at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
         at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
         at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
         at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
         at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
         at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:568)
    ): Internal error org.omg.CORBA.OBJECT_NOT_EXIST: vmcid: 0x0 minor code: 0 completed: No
    [2005/8/26 6:20:9:66] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Shutdown
    [2005/8/26 6:20:9:66] Info 56047 (EngineManager:remove): Reports Server shut down engine rwEng-0
    [2005/8/26 6:20:9:66] State 56016 (JobManager:updateJobStatus): Job 98 status is: Terminated with error:
    REP-56048: Engine rwEng-0 crashed, job Id: 98
    [2005/8/26 6:20:9:66] Debug 50103 (JobManager:notifyWaitingJobs): Master job 98 notify its duplicated jobs.
    [2005/8/26 6:20:9:66] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 98
    [2005/8/26 6:20:9:67] Exception 56048 (): Engine rwEng-0 crashed, job Id: 98
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=56048,
    java.lang.String errorString="Engine rwEng-0 crashed, job Id: 98",
    java.lang.String moduleName="REP"
         at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:861)
         at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
         at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
         at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
         at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
         at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
         at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
         at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
         at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:568)

    mmmh. Did you compared the select count(*) from your_table; in the two cases.
    If the result is not good and nobody has deleted rows between migration and your test, you migration need to be replayed.
    Which migration did you select, Transportable database or exp/imp...?
    Edited by: Dba Z on 16 août 2009 08:56

  • Step to export and import oracle 10g on AIX,LINUX

    Hi ,
    Plase any one can give nme the steps to be followed to export and import oracle 10g database from AIX to AIX and LINUX also.
    Waiting for your response.
    Thanks..

    You dont have to follow any special steps, Export and Import are same on all OS's.

  • Oracle 10g installation error in AIX 6.1 Platform

    Friends ,
    While installing Oracle 10g (10.2.0.1.0) on AIX 6.1 platform ,I get the following errors :
    Checking operating system requirements ...
    Expected result: One of 5200.004,5300.002
    Actual Result: 6100.01
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 10g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    =======================================================================
    Checking operating system package requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'AIX Version 6100.01' is not supported.
    Recommendation: Install the required packages before continuing with the installation.
    =======================================================================
    Checking recommended operating system patches
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'AIX Version 6100.01' is not supported.
    Recommendation: You may actually have installed patches which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing patches.
    =======================================================================
    Is there any solution to resolve this problem like patch update or anything ? Barring this , does oracle 11g is recommended in AIX 6.1 unix platform ? Do you have any idea plz ?

    shipon_97 wrote:
    Friends ,
    While installing Oracle 10g (10.2.0.1.0) on AIX 6.1 platform ,I get the following errors :
    Checking operating system requirements ...
    Expected result: One of 5200.004,5300.002
    Actual Result: 6100.01
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 10g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    =======================================================================
    Is there any solution to resolve this problem like patch update or anything ? Barring this , does oracle 11g is recommended in AIX 6.1 unix platform ? Do you have any idea plz ?Check certification matrix:
    http://www.oracle.com/technology/support/metalink/index.html
    10gR2 only 64bit is certified with AIX 6.1

  • Dbms_job In Oracle 10g

    Hi all,
    whether DBMS_JOB is desupported in oracle 10g .
    Is there any site from oracle to list all the De-supported Items..
    Regards,
    Mohammed

    whether DBMS_JOB is desupported in oracle 10g .DBMS_JOB still in V10

  • Oracle 10g database in AIX 6.1.

    Hello ALL!
    Would anyone know what are the parameters or settings that need to be configured in AIX 6.1. before you can install Oracle 10g database?
    Should you know any helpful and related links, please share.
    Thanks so much!!!

    You will need 10.2.0.3 or higher - see these MOS Docs for details
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Minimum Software Versions and Patches Required to Support Oracle Products on IBM Power Systems [ID 282036.1]     
    HTH
    Srini

  • Oracle 10g R2 dbms_scheduler ora-00054

    Hi,
    I am using dbms_scheduler in Oracle 10g R2 to process a list of requests in a table queue. I am using job chains in my package. I realize that, at times, one of the chain step can fail with Ora-00054 error. Can we rectify the situation by adding a chain rule that if job failed due to Ora-00054 error, execute 'dbms_scheduler.alter_running_chain(jobname,stepname,'STATE','NOT_STARTED') and expect the job to run again?

    Hi,
    It is possible to do this. Let the step which fails be step-x You would need to create a new step e.g. rerun-step-x which points to a program that would do an alter running chain to set both step-x and rerun-step-x to not _started.
    In the rule you would check if ':step-x:state=''FAILED'' and :step-x.error_code=54' and if so start rerun-step-x .
    You can see the exact syntax supported here
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_sched.htm#CHDBAFJE
    Hope this helps,
    Ravi.

  • How to do automatic start and shut  of Oracle 10g and listerner  on AIX 6

    Hi ,Please help ,how do we do automatic startup and shutdown of Oracle Database and Listener at System Reboot ,I am using Oracle 10G and operating system is AIX 6,Thanks

    Hi,
    Check this
    http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#BGBJBAEI
    for more ref
    http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php
    Edited by: CKPT on Jan 7, 2011 1:11 PM

  • Oracle 10g on AIX 6.1

    Dear all,
    I am installing oracle 10g on AIX 6.1. But the installer hangs.
    -bash-3.2$ ./runInstaller -ignoreSysPrereqs
    Has 'rootpre.sh' been run by root? [y/n] (n)
    y
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Ignoring required pre-requisite failures. Continuing...
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-14_09-38-12AM. Please wait ...
    please help

    Might be a little late for you but maybe for others. If the installer hangs on your exact point you don't have X11 redirection enabled.
    I wrote some interesting articles about it:
    Installation and configuration ssl and ssh on aix 6.1:
    http://www.warmetal.nl/aix61#additional_software
    Installation and configuration for your Windows machine:
    http://www.warmetal.nl/cygwin
    Additional redirection configuration when you use su:
    http://www.warmetal.nl/aixpostinstall#ssh_x11_forwarding_and_su
    This should solve your problems.
    Regards
    Sjoerd

Maybe you are looking for

  • Href links in slideshow not working

    hi, I have created a non-flash slideshow with WOW Slider which I find to be a very good program and is jquery based. the actual slideshow runs fine on iPad, my PC - and Android devices, but: the six slides have links embedded to other websites, that

  • At startup I get a file folder with a ?

    I Have a 2007 iMac, I had to force shut off when iTunes froze.  When I rebooted the screen had a file folder with a ? On it.  I am running 10.6.8  and I have a time machine backup.

  • New Numbers problem

    In the previous of Numbers version, I could type in text and it would remind me of all the previous text I had typed. This was extremely helpful to me as I use Numbers a great deal. In the new versions this option doesn't appear to be available. Is t

  • Travel Advance Special GL Posting-Setting up Posting Key

    Dear experts, I have managed to setup the Travel Advance correctly and also managed to post it which read as posting key 21 and 31. However, i am not posting it as a Special GL Account as at transaction PRT3, under Group HRR(Postings from Travel Expe

  • EOS 5D MARK II, Best Codec, 720p or 1080p

    Hello all I am beginning to use my 5D Mark II not only for pictures but also for movies. I have gone and purchased a copy of FCE4. Now I have a question, since the file that comes out of the camera is not very good for editing, which codec should I u