Oracle 10g--change port of service bound to 8080

I've installed 10g on a windows 2000 machine already running a j2ee application container. There is a conflict on port 8080. What is the oracle service running on port 8080--another servlet engine? How can I change this port? I haven't found this in the documentation.
Thanks,
Howard

It's the xdb service bound on port 8080. Apparently several methods exist for changing the port. Config file actually stored inside oracle.

Similar Messages

Oracle 10g discoverer and report services installation issue

Hi
Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
at configuration assistants the opmn configuration failed..
could some one suggest the possible solution for this problem.
thanks

at configuration assistants the opmn configuration failed..additional clues may exist within log file.
Edited by: sb92075 on Aug 29, 2010 7:19 PM

Oracle 10g Enterprise Manager web service unable to start

I am unable to get Enterprise Manager web service for Oracle 10g to start in Windows. Anybody can tell me where to find out what is the problem and what are the possible problems and solutions? I do not wish to re-install or create a new database instance because there is existing data and will require extensive configurations to my web and app servers if I change the database instance. Thanks!

Hi.
What does the log say?
From %ORACLE_HOME%\opmn\logs folder.
rgds
Kjell

Installed Oracle 10g on Windows XP Service Pack 2 won't open admin page

When I go to the home page and login, it just comes back to the login screen instead of the admin screen. I know it's processing the login because it will tell me if I use a bad password.

hello,
Was your oracle 10g installation successfull or not?. Please make sure all oracle services are running or not. You can check them as mentioned below.
start->run->services.msc
check for these services.
a) OracleDBConsole<SID>
b) OracleOraDB10g_home1TNSListener
c) OracleService<SID>
If any of the services is down please try to start it.
What username/password you are using to login?
-Sri

Version compatibility - oracle 10g - window 2008 terminal services

Hi,
Anyone knows if following is compatiable with window 2008 terminal services?
Oracle 10g
Oracle ADI (7.1)
Oracle Financial analyzer 6.4
Oracle Express Client 6.3.4
Discoverer 4

Answers should be in Metalink --> Certify tab --> View Certifications By Platform
HTH
Srini

Oracle 10g Listener Port Changes after every Restart

Hi All,
I have installed Oracle10g in my Laptop and was working fine till last week, but now when I start the Listener, it is starting with different port number other than the default port 1521. ( For example first time Listener started with port number 3110, then after restarting the Listener it becomes 3313, and so on) That means server is assigning different port numbers on every time when the listener starts.
Because of this I am not able to connect to the database.
How to make the Listener port as default 1521 permenantly.
Please help.
Regards

Hi,
Can you please check the listener.ora file? Do you have the port number
mentioned as 1521 as below:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = my_server_name_fully_qualified)(PORT = 1521))
Regards,
Chandan

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

Web access of oracle 10g (10.1.2.0.0) Application

Hi,
I've migrated my application from Tomcat and JBoss to Oracle 10g (10.1.2.0.0).
I am able to access my application by url
http://localhost:7200/index.jsp or http://127.0.0.1:7200/index.jsp.
But when I am trying to access my application by giving m/c name or m/c ip address insted of localhost in the above url, i am not getting access to the application.
Do I need to configure any where for remote access of my web application?
Thanks
Bhogi

I got the fix for the issue posted by me few days back.
In Oracle 10g AS, port 7200 is diagnosis port, which will only work for localhost or 127.0.0.1.
The application is accessable on the configured http port (default 7777)

Port number from 7777 to 8080 - URGENT please

dear all,
i'm using Apex 2.2,
i wanted to change port number from 7777 to 8080,
due to Security Reasons, i have to change the port from 7777 to 8080
in which File i need to do the Changes & what are the Steps to be Followes,
http://10.33.20.6:7777/pls/apex1/apex
i wanted to change the same to
http://10.33.20.6:8080/pls/apex1/apex
please Help me out in this,
its is Very URGENT PLEASE
Many thanks

This is unlikely to be any help becaue your URL specified 'pls' in the path indicating that you are using mod_plsql, but but you might like to check that you are not inadvertently servicing your Apex instance with the embedded PL/SQL gateway.
Check to see if you are using EPG with the simple sql :
SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
If value returned is 7777 then you appear to be using EPG.
Change the port using EXEC DBMS_XDB.SETHTTPPORT(8080);
And then navigate your http://10.33.20.6:8080/pls/apex
As I said it's unlikely to be any help but wort checking all the same.

ORA-29278: SMTP transient error:421 Service not available on oracle 10g

HIi,
I am trying to send e-mails by using PL/Sql procedure . I am using UTL_MAIL/UTL_SMTP on oracle 10g R1 database.
There is no problem in creating procedure,but when i am doing execution i am getting the mention error.
I am trying to send mail with attachment as excel file.
ORA-20001: The following error has occured: ORA-29278: SMTP transient error:
421 Service not available
ORA-06512: at "SCOTT.MAIL_ATT_RAW", line 64
ORA-06512: at line 1
-----my procedure code------
CREATE OR REPLACE PROCEDURE mail_att_raw(filename varchar2) AS
fil BFILE;
file_len PLS_INTEGER;
MAX_LINE_WIDTH PLS_INTEGER := 54;
buf RAW(2100);
amt BINARY_INTEGER := 2000;
pos PLS_INTEGER := 1; /* pointer for each piece */
filepos PLS_INTEGER := 1; /* pointer for the file */
filenm VARCHAR2(50) := filename; /* binary file attachment */
data RAW(2100);
chunks PLS_INTEGER;
len PLS_INTEGER;
modulo PLS_INTEGER;
pieces PLS_INTEGER;
err_num NUMBER;
err_msg VARCHAR2(100);
resultraw RAW(32000);
BEGIN
/* Assign the file a handle */
fil := BFILENAME('BFILE_DIR', filenm);
/* Get the length of the file in bytes */
file_len := dbms_lob.getlength(fil);
/* Get the remainer when we divide by amt */
modulo := mod(file_len, amt);
/* How many pieces? */
pieces := trunc(file_len / amt);if (modulo <> 0) then
pieces := pieces + 1;end if;/* Open the file */
dbms_lob.fileopen(fil, dbms_lob.file_readonly);/* Read the first amt into the buffer */
dbms_lob.read(fil, amt, filepos, buf);/* For each piece of the file . . . */
FOR i IN 1..pieces LOOP/* Position file pointer for next read */
filepos := i * amt + 1;/* Calculate remaining file length */
file_len := file_len - amt;/* Stick the buffer contents into data */
data := utl_raw.concat(data, buf);/* Calculate the number of chunks in this piece */
chunks := trunc(utl_raw.length(data) / MAX_LINE_WIDTH);/* Don't want too many chunks */
IF (i <> pieces) THEN
chunks := chunks - 1;
END IF;/* For each chunk in this piece . . . */
FOR j IN 0..chunks LOOP/* Position ourselves in this piece */
pos := j * MAX_LINE_WIDTH + 1;/* Is this the last chunk in this piece? */
IF (j <> chunks) THEN len := MAX_LINE_WIDTH;
ELSE
len := utl_raw.length(data) - pos + 1;
IF (len > MAX_LINE_width) THEN
len := MAX_LINE_WIDTH;
END IF;
END IF;/* If we got something, let's write it */
IF (len > 0 ) THEN
resultraw := resultraw || utl_raw.substr(data, pos, len);
END IF;
END LOOP;/* Point at the rest of the data buffer */
IF (pos + len <= utl_raw.length(data)) THEN
data := utl_raw.substr(data, pos + len);
ELSE
data := NULL;
END IF;/* We're running out of file, only get the rest of it */
if (file_len < amt and file_len > 0) then
amt := file_len;
end if;/* Read the next amount into the buffer */dbms_lob.read(fil, amt, filepos, buf);
END LOOP;/* Don't forget to close the file */
dbms_lob.fileclose(fil);
SYS.UTL_MAIL.SEND_ATTACH_RAW(sender => '[email protected]', recipients => '[email protected]',subject => 'Testmail', message => 'Hallo', attachment => resultraw, att_filename => filename);
EXCEPTION
WHEN OTHERS THEN--dbms_output.put_line('Fehler');
raise_application_error(-20001,'The following error has occured: ' || sqlerrm);
END;
Please suggest me what settings i need to change. This same procedure is running on another maching,but not on my machine.
If somebody is having any other simple procedure ,please help me.
My SMTP port -25
Thanks in advance.

Hi Justin,
Please get the answers of your queries
The error you're getting is coming from the SMTP server you are trying to connect to.
- What SMTP server is your database configured to use?
Reply - I am using IIS(5.0)
- What SMTP server is the database where this code is working configured to use?
Reply - Same IIS. Database is installed locally on my machine only. I am trying to send mail locally to me only,Not to the outside person.
- Has the SMTP server been configured to allow connections from both machines?
Reply - Yes
One more query, do we really require to set the SMTP_OUT_SERVER parameter for SCOPE=BOTH
ALTER SYSTEM SET smtp_out_server = '172.16.1.10' SCOPE=BOTH
I am not able to set like this for BOTH,only for SPFILE i can set ?.
My SMTP Server IP=172.16.1.10
PORT- 25
Thanks
Manoj

Not able to start the listener in oracle 10g after the domain name changed

Hi
I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
oracle@ptcr4d00:~> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/10g/network/admin/listener.ora
Log messages written to /opt/oracle/10g/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I have posted the contents of the tnsnames.ora and listeners.ora
TNSNAMES.ORA
TC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENERS.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
Could you please help me to resolve this issue ?
Regards
Mani

Hi
Please find the content of the /etc/hosts below
# IP-Address Full-Qualified-Hostname Short-Hostname
#127.0.0.1 localhost
9.124.114.49 PTCR4D00
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
9.124.114.49 PTCR4D00 PTCR4D00
Regards
Mani

How To Execute an Oracle 10g SProc using VS 2005, for Reporting Services

Good day! :-)
Anybody who knows the syntax for executing an Oracle Stored Proc thru ODBC connection using VS 2005 for Reporting Services? I am having a problem about this.
I am using the ODBC connection because VS 2005 does not support Oracle Database 10g in its Oracle Database Connection feature (only 7.3, 8i, and 9i), that's y.
While using MS SQL Server 2000, I never encountered any problem. But using Oracle Database 10g, I find it hard to call the stored procedures, an error is generated everytime.
Please click the link below for the screenshots:
http://www.geocities.com/vrcode2/oraError.JPG
http://www.geocities.com/vrcode2/storedProc.JPG
Please help...thank you so much.
Francis

I'll give you updates about the use of the MS SQL Server Reporting Services with VS 2005 and Oracle, this might be helpful for those who will encounter this same ctuation in the future.
I have discovered that if you're going to connect thru ODBC, even if the connection is successful, the user is still prompted to input a password, which should not be the case when using the Reporting Services. Another thing to take note is the issue about REF CURSOR, we're going to have problems with this. And also the syntax on how you're going to call the stored procedures (with or without input parameters).
With modifications made through Oracle Net Manager, and I tried AGAIN connecting through "Oracle (client)" feature of VS 2005 (even if the list only include Oracle 7.3, 8i, and 9i that are supported) with some changes also, you'd still be able to generate correct data with that solution. If the configuration is correct, you just need to call the stored procedure (with or without input parameter), you won't have any problems about the correct syntax.
I suppose VS 2005 was released earlier than Oracle 10g, that's why 10g wasn't included If ever u'd encounter the same ctuation like mine, and u need the details on how to connect, do not hesitate to ask me.

Regarding Services in Oracle 10g RAC

Hi All,
We are having Oracle 10g RAC (10.2) on Linux machines. We don't have any services configured failover. This can be visible from srvctl config database -d, as nothing related services information is displayed.
I even checked failover_type and Failover_method from GV$session and for all it's showing None. We have only default database service (same as database name).
My question is:
Can I modify/configure this default service as failover/loadbalance enabled using srvctl? If so, please let me know.
PS: I can't provide any output here as our client network doesn't permit copying.
Regads,
Kumar

Hi,
THank you for your inputs. Below is the configurations settings of my environment.
Client Side TNS Entry:
jdbc:oracle:thin:@(DESCRIPTION = (LOAD_BALANCE=on) (FAILOVER=on) (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac2)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = prod) (SERVER = DEDICATED) (FAILOVER_MODE= (TYPE=SELECT) (METHOD=PRECONNECT))))
Below are the tns and listener details for both servers eb1-db-svr and eb1-db-bck-svr and both instances have remote_listener as “LISTENERS_PROD”
eb1-db-svr-bck# lsnrctl status LISTENER_EB1-DB-SVR-BCK
LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 06-DEC-2013 11:27:20
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eb1-db-svr-bck-rac)(PORT=1521)(IP=FIRST)))
STATUS of the LISTENER
Alias                     LISTENER_EB1-DB-SVR-BCK
Version                   TNSLSNR for Solaris: Version 10.2.0.4.0 - Production
Start Date                19-OCT-2013 14:21:18
Uptime                    47 days 22 hr. 6 min. 2 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File         /oracle/app/oracle/product/10.2.0/db_1/network/log/listener_eb1-db-svr-bck.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.31)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.35)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM2", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM2", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PROD" has 2 instance(s).
Instance "PROD1", status READY, has 1 handler(s) for this service...    ---> SHOWING TWO SERVICES ON NODE2
Instance "PROD2", status READY, has 2 handler(s) for this service...
Service "PROD_XPT" has 2 instance(s).
Instance "PROD1", status READY, has 1 handler(s) for this service...
Instance "PROD2", status READY, has 2 handler(s) for this service...
The command completed successfully
eb1-db-svr# lsnrctl status LISTENER_EB1-DB-SVR
LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 06-DEC-2013 11:24:42
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eb1-db-svr-rac)(PORT=1521)(IP=FIRST)))
STATUS of the LISTENER
Alias                     LISTENER_EB1-DB-SVR
Version                   TNSLSNR for Solaris: Version 10.2.0.4.0 - Production
Start Date                25-NOV-2013 20:43:08
Uptime                    10 days 14 hr. 41 min. 34 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File         /oracle/app/oracle/product/10.2.0/db_1/network/log/listener_eb1-db-svr.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.30)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.207.195.32)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PROD" has 1 instance(s).
Instance "PROD1", status READY, has 2 handler(s) for this service...   --> SHOWS ONLY ONE HANDLER FOR THIS
Service "PROD_XPT" has 1 instance(s).
Instance "PROD1", status READY, has 2 handler(s) for this service...
The command completed successfully
eb1-db-svr# cat listener.ora
# listener.ora.eb1-db-svr Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora.eb1-db-svr
# Generated by Oracle configuration tools.
SID_LIST_LISTENER_EB1-DB-SVR =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
      (PROGRAM = extproc)
LISTENER_EB1-DB-SVR =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521)(IP = FIRST))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.207.195.32)(PORT = 1521)(IP = FIRST))
eb1-db-svr# cat tnsnames.ora
# tnsnames.ora Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
LISTENERS_PROD =
(ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
PROD =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
PROD2 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD2)
PROD1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD1)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
eb1-db-svr-bck# cat listener.ora
# listener.ora.eb1-db-svr-bck Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/listener.ora.eb1-db-svr-bck
# Generated by Oracle configuration tools.
SID_LIST_LISTENER_EB1-DB-SVR-BCK =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
      (PROGRAM = extproc)
LISTENER_EB1-DB-SVR-BCK =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521)(IP = FIRST))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.207.195.35)(PORT = 1521)(IP = FIRST))
eb1-db-svr-bck# cat tnsnames.ora
# tnsnames.ora Network Configuration File: /oracle/app/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
LISTENERS_PROD =
(ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
PROD =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
PROD2 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-bck-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD2)
PROD1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eb1-db-svr-rac)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
      (INSTANCE_NAME = PROD1)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)

How to change the firewall settings to provide remorte access to oracle 10g

dear all
I have created the oracle 10g database and it is working properly...but I cant loging with thedata base remotely when the host's firewall is on..when it is off I can connect with the database remotely..how can I change the firewall settings in this case

You need to configure your firewall to allow traffic on the ports listed in ORACLE_HOME\install\portlist.ini.
You do not need to allow all of the ports, just the ports you want to allow traffic. For example if you are not using iSQL Plus you do not have to open port 5560 or the range 5560–5579.
You can find a description of the ports at the following link.
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14316/ports.htm#CIHECDEE

Shared services 9.3.1 configuration to connect to oracle 10g xe fails

I am trying to install Hyperion shared services on Windows XP media center. I have Apache Tomcat running as localhost and Oracle 10g express edition running as database. When I try to install hyperion shared services, the installation process goes well until database configuration details.
I can see my server name, Port: 1521. Then I have a table with other details
Product SID User Name Password DataTablespace Index Tablespace.
I enter the password used to connect to oracle database as "admin" in shared services.
User Name = hypuser
SID = hypdb
Product = Hyperion
Then I click next. I keep receiving this error message " Unable to connect to the database for product hyperion shared services".
Can some one tell me what the problem is?
Backuperror notepad shows: System error 1060 has occurred.
The specified service does not exist as an installed service.
Thanks.

Hi,
First of all "Windows XP media center" is not an officially supported O/S so you may experience issues.
Before you configure the database you will have you have created a schema for HSS in Oracle, for example if you created a schema called HSS with password of hyperion then the connection details will be
SID : XE
username : HSS
password : hyperion
The SID is usally XE by default on oracle express editions.
Cheers
John
http://john-goodwin.blogspot.com/

Oracle 10g--change port of service bound to 8080

Similar Messages

Maybe you are looking for