Oracle 10g express as it applies to 'HANDS-ON Oracle Database' education

Good afternoon.
I have Installed the software provided with this learning material. I am proud to say I CAN log into the homepage. My problem unfortunately is I can travel through out the home page with the exception of the object browser. I get an error 'webpage cannot be found'. And when i goto the sql commands page and enter 'select * from orders;' I get "ORA-00942 Table or view does not exist" error. However, running this command from the run sql command line prompt I am able to successfully gather the information. I have disabled the firewall as a test to ensure this is not the problem to no avail. Does someone have an idea i have not thought of?

Hi,
OK, if you add schema name to your select
select * from YOUR_USER.ordersReplace YOUR_USER with use you are login when you run working select from SQL client
Br,Jari
Edited by: jarola on Jan 21, 2010 8:05 PM
See this post also
New mine created user can't access hr tables despite I gave him permissions

Similar Messages

10g express, how to change port number for the database home page

10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
Regards
jl

Andy, thank you very much, I have been able to changed the port number following your advice.
I hope you do not mind I ask a further questions along this line:
I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
Thanks
jl

Oracle Database 10g Express Edition & linux Fedora

Hi guys
How are you doing?
I want to ask about my problem which is I can't access to the home page of Oracle Database 10g Express Edition when I press on "Go To Database Home Page" it's open firefox but does not do any thing by the way I try to write the web page http://127.0.0.1:8080/apex on the address bar but firefox give me an error which is "Unable to connect"
So please when you know the solution post it here step by step "I'm beginner linux user" .
My distribution is Fedora 14
..Thanks a lot
Saleh

Was the configure step completed successfully?i.e., did you run
/etc/init.d/oracle-xe configure after you installed the rpm? This is similar in XE 10g and 11g beta. You can run this again to reenter your configuration parameters, especially concerning HTTP port, and make sure they have the expected values that way.
Despite that, you could try to (re)start the service, and see if it comes up without errors.
/etc/init.d/oracle-xe stop
/etc/init.d/oracle-xe startIf everything doesn't look too bad, you could have a port conflict with another service using port 8080. In that case, you could reconfigure XE to have its HTTP server listening to a different port.
-Udo

Oracle 8i to 10g Express data migration?

Howdy,
I'm very new to Oracle so a lot of the terminology I'm not completely up to date on versus MySQL & MS-SQL.
We have a new client who has an Oracle 8i system they have data in that we need to develop against and import from. We were looking into having them provide a copy of their DB that we would then run in a 10g Exp edition locally while we work on the data. The problem is I'm having a hard time finding documentation on how to actually perform this process? With MS-SQL I can make a backup file from an older version then import and the data is upgraded at that time, similarly with MySQL and their SQL backup files. What process would I need to do to restore/import an older 8i DB into a 10g type environment?

Welcome to the forums !
10g Express Edition has limited capabilities - see http://download.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABJBGGA
If any of the features not available in 10g Express Edition are being used in the 8i database, you will not be able to use 10g Express Edition. You will need one of the other editions - see http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#BABJICBB
How big is the 8i database ? You should be able to ask them to provide an export dump file (http://download.oracle.com/docs/cd/A87860_01/doc/index.htm) that you can then import into a suitable 10g database (http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#sthref2591)
This process requires some knowledge / experience with Oracle. Pl also note that both 8i and 10g versions are de-supported, so do not expect too much help from Oracle Support if you run into issues.
HTH
Srini

Can 10g express perform pull replication?

I have a MS Sql Server on one end with a distributor and publisher of data for replication. I would like to have on the other end Oracle 10g express perform a pull subscription of one table (back to) to the MS Sql Server. Can 10g express perform this function?
The reason I ask this question is that I currently have MS Sql Server Express on the other end. It cannot perform the pull subscription due to function limitation. Thanks.

Welcome to the forums !
10g Express Edition has limited capabilities - see http://download.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABJBGGA
If any of the features not available in 10g Express Edition are being used in the 8i database, you will not be able to use 10g Express Edition. You will need one of the other editions - see http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#BABJICBB
How big is the 8i database ? You should be able to ask them to provide an export dump file (http://download.oracle.com/docs/cd/A87860_01/doc/index.htm) that you can then import into a suitable 10g database (http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#sthref2591)
This process requires some knowledge / experience with Oracle. Pl also note that both 8i and 10g versions are de-supported, so do not expect too much help from Oracle Support if you run into issues.
HTH
Srini

Exercise 4.3 in Hands-On Oracle DB 10g Express Ed for Windows

This is just an FYI ... (and a great suggestion to post this comment here as well for correction of documentation by an Admin in Oracle XE forum)
Exercise 4.3 in Hands-On Oracle DB 10g Express Ed for Windows is for demonstrating the use loops. According to the text the last example in this exercise is supposed to output the same code as the first two examples. This is incorrect. The code for the last example is a FOR LOOP:
FOR l_loopCounter IN 0 .. 10 LOOP
This example will necessarily take the loop through eleven times instead of the expected ten times according to the text. Thus the output looks something like this:
0 1 2 3 4 5 6 7 8 9 10 Loop Exited
Statement processed.

Thanks. Good info.
And thanks for putting it in this forum as well as the XE forum. The doc developers will get the message from here, but might not from the XE forum.

Apply Latest Security Patches on Oracle Database 10g Express Edition (XE) ?

Hi !
I have an Oracle Database 10g Express Edition (XE) version 10.2.0.1.0 running on a Microsoft Windows 2003 SP2 server.
I need to find and install the latest security patches on this database.
Can someone inform me where I can find these patches and the steps for installing these patches?
Thanks,
Kind Regards,
Shailesh

Hi,
Welcome 2 oracle forums :)
Can someone inform me where I can find these patches and the steps for installing these patches?U can find all the latest security and all available patches on https://support.oracle.com/CSP/ --> Patches and updates tab
Regards,
X A H E E R

Oracle 10g Express Edition Installation Error

I have downloaded 10g Express Edition and am trying to install. After clicking on the OracleXE.exe file, I get the following error:
Error applying transforms. Verify that the specified transform paths are valid. C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
I have verified that the path and file exists. What else should I do?

Here is the Ipconfig settings:
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jfunk
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
Ethernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection 5:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com 3C920 Integrated Fast Ethernet
Controller (3C905C-TX Compatible) #4
Physical Address. . . . . . . . . : 00-08-74-48-AE-AB
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 200.105.128.40
200.105.128.41
C:\Documents and Settings\funk>
No luck in changing the Temp environment setting. Here is the latest log.
=== Verbose logging started: 8/22/2007 16:55:24 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:\PROGRA~1\COMMON~1\INSTAL~1\Driver\11\INTEL3~1\IDriver.exe ===
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'c:\temp\_is5F\Oracle Database 10g Express Edition.msi' against software restriction policy
MSI (c) (10:B8) [16:55:24:765]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is not digitally signed
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:775]: Cloaking enabled.
MSI (c) (10:B8) [16:55:24:775]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (10:B8) [16:55:24:775]: End dialog not enabled
MSI (c) (10:B8) [16:55:24:775]: Original package ==>
MSI (c) (10:B8) [16:55:24:775]: Package we're running from ==> c:\temp\_is5F\Oracle Database 10g Express Edition.msi
MSI (c) (10:B8) [16:55:24:775]: Transforming table Property.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: looking for appcompat database entry with ProductCode '{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}'.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (10:B8) [16:55:24:775]: MSCOREE not loaded loading copy from system32
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source to launched-from source.
MSI (c) (10:B8) [16:55:24:785]: Setting launched-from source as last-used.
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR ==> c:\temp\_is5F\
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR product ==> {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Original transform ==> c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Transform we're running from ==> C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:795]: Found missing cached transform c:\temp\_is5F\1033.MST. Adding it to re-cache list.
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: Verifying transform --> 'c:\temp\_is5F\1033.MST' against software restriction policy
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is not digitally signed
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:795]: Validating transform 'C:\temp\5d536d5.mst' with validation bits 0
MSI (c) (10:B8) [16:55:24:795]: Transform 'C:\temp\5d536d5.mst' is valid.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: 'PatchPackage' table is missing or empty. No pre-transform fixup necessary.
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: Applying regular transform to database.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: ActionText 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: AdminExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdminUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppId 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppSearch 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
DEBUG: Error 2251: Database: c:\temp\_is5F\Oracle Database 10g Express Edition.msi Transform: Cannot delete row that doesn't exist. Table: Property
1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
Error applying transforms. Verify that the specified transform paths are valid.
c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 1708
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Product: Oracle Database 10g Express Edition -- Installation failed.
MSI (c) (10:B8) [16:55:24:805]: Attempting to delete file C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:805]: Unable to delete the file. LastError = 32
=== Verbose logging stopped: 8/22/2007 16:55:24 ===
I am on my last attempt here if there are no other concrete solutions. Guess I will have to wait for 11g to make it to the Windows environment. Any other previous version of 10g that I can try????

Connecting oracle 10g express edition to jdeveloper

I am having all kinds of problems connecting oracle 10g express edition with my jdeveloper 10.1.3.3. I can query the database from my command line so I know it is set up, but for whatever reason jdeveloper will not connect with it. When I try to connect with the database through jdeveloper here is the error I keep getting:
Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
localhost:1521:ORCL
I have been all through the google results looking for an answer and have come to the conclusion that it is something with either the listerner file or the tns file, but as of yet have been unable to locate them. here are both of those files too.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = ##########)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = #########)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please any help would be appreciated I have been at this for days, thanks.

This has to be some kind of bug with 10g express because I see lots of people having similar problems. I'm in the process of uninstalling 10g, and I will re-install it see if that makes a difference. Again if anyone has any other ideas please keep them coming because this is utter BS it shouldn't be this hard.

UTF support in XML DB at Oracle Database 10g Express Edition Beta 2

hello everybidy! ;)
I use Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows (dated 16-Nov-05) and place into XML DB XSLT-file (UTF8-encoded and contained some Cyrillic chars) and 10g XP can`t apply such transformation but when i replace cyrillic chars with latin chars - everything work just fine. Is it known bug? Can it be fixed by some reconfiguration or moving to Linux version of 10g XP? When will new release?
truly yours,
Slav
p.s. here some oracle forum testing ХАРЕ=XAPE, PAMA=РАМА :)

Hello, Bhagat.
I don't understand why you would install HTMLDB with apexins.sql (it's a procedure to install HTMLDB for 9i and 10G EE/SE not XE)
because HTMLDB (APEX) is already install with Oracle Express Edition. Not need
to install it with apexins.sql
Mike

Attaching DBF / ORA files to Oracle 10g express

Hi,
I have Oracle 10g Express and I want to attach/restore database. I`m begginer in oracle so I know little about process of restoring/attaching databases. I have only DBF/ORA files, is it possible to restore them and how?
Any help appreciated.
Thanks,
Ivan.
Message was edited by:
Vertygo

Probably not... Oracle does not generally allow you to take data files from one machine and mount them on another machine.
If you have a small dump file (generally .DMP) and a handful of data files, you might have some transportable tablespaces, but it doesn't sound like that is the case.
If you have control files, you might have a closed database backup. If that were the case, you could do a database restore, but you would only be able to use the express edition if that was the original database version you took the backup from. It doesn't sound like you have control files, though, so I don't expect that you could do a recovery.
If the original database is still around, the easiest option would probably be to do an export from that system and an import into your new database (using the exp/imp or expdp/impdp tools depending on the source Oracle version).
Justin

Oracle Database 10g Express

Hi,
can OEM 10g Grid manage Oracle Database 10g Express Edition for windows ?
Many thanks.

Thank you, but I have already did this :
In the Tasks list at the right of the page, click Manage HTTP Access.
If prompted for administrator credentials, enter the SYSTEM user name and password or another administrator user name and password, and then click Login. See "About Administrative Accounts and Privileges" for more information.
The Manage HTTP Access page appears.
Select Available from local server and remote clients, and then click Apply Changes.

AUDIT IN Oracle Database 10g Express

I configured Oracle Database 10g Express R2 for auditing,
ALTER SYSTEM SET audit_trail=db SCOPE=SPFILE;
AUDIT SELECT TABLE, UPDATE TABLE;
but...in dba_audit_trail ,
ACTION_NAME is always SESSION REC
but...i think its possible to record specific action like select,update..etc
thanx

Yes, regular auditing features are available at Oracle XE. Once you have configured your audit trail, just issue the audit command to start auditing focused areas.
~ Madrid

Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition

G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
Carlos

My database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help.

How can i create a new database instance in oracle 10g express edition?

hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
Chaitanya

Chaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

Oracle 10g express as it applies to 'HANDS-ON Oracle Database' education

Similar Messages

Maybe you are looking for