Oracle 10g schedualed job did not start

Hi every one,
I am facing the following problem and I need your help:
There is scheduled job invoking a Procedure .The job does not run although the next run date is set. The job should run once daily. The next run date remains the same and the Logs for the job do not show any succssful or failure attempts. The job is enabled and is working fine in another system.
All the other scheduled jobs are running.
The Procedure can be successfully executed manually.
There are no simultaneous jobs that are scheduled at the same time.
The number of scheduled jobs is acceptable.
The platform is Sun Solaris 10 , RAC 10g

Hello,
Can you post your code ? Also look under following view dba_scheduler_jobs (status, next_run_date). Here is sample job that runs daily once in 9:00 AM. Your job status should be either 0 or 1,
BEGIN
   sys.DBMS_SCHEDULER.create_job (
      job_name          => '"MYSCHEMA"."MY_DAILY_JOB"',
      job_type          => 'PLSQL_BLOCK',
      job_action        => 'begin
myschema.file_upload;
end;',
      repeat_interval   => 'FREQ=DAILY;BYHOUR=9;BYMINUTE=0;BYSECOND=0',
      start_date        => SYSTIMESTAMP AT TIME ZONE 'US/Eastern',
      job_class         => 'DEFAULT_JOB_CLASS',
      auto_drop         => FALSE, --------- > auto_drop should be set to FALSE
      enabled           => FALSE
   sys.DBMS_SCHEDULER.set_attribute (name        => '"MYSCHEMA"."MY_DAILY_JOB"',
                                     attribute   => 'restartable',
                                     VALUE       => TRUE);
   sys.DBMS_SCHEDULER.enable ('"MYSCHEMA"."MY_DAILY_JOB"');
END;Regards
Edited by: OrionNet on Feb 7, 2009 9:52 AM

Similar Messages

  • Oracle 10g  Report Server is Not Starting Up?

    Hi,
    I have installed Oracle 10g Developer Suite (10.1.2.0.2) and OS is Windows 2003 Server R2 SP2 32-Bit, i have run this Command rwserver server = server name start for starting up my report server,it show error message REP-56105: Engine {0} died with error:* and report server status is shutdown.
    Please Advice,
    Thank You
    Shan

    1) Please post the version of Reports and the OS because some problems could be version specific and OS specific
    2) Enable tracing
    Edit
    $OH\reports\conf\server_name.conf
    And uncomment "trace" element. It should be like this
    <trace traceOpts="trace_all"/>
    Now we can see the engine trace also in logs directory. That may throw some light about the issue.
    3) Please try the following in conf file
    Comment the url engine element if you are not planning to use url engine
    <!--engine id="rwURLEng" .... /-->
    4) Increase callback timeout for rwEng engine element in conf file
    <engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000">
    Increase callbackTimeOut (make it 1.5 or double or something) and try
    Thanks
    The Oracle Reports Team

  • Pearson Vue 10g testing did not start - technical issues.

    Hi,
    I registered for the 10g DBA II exam on 28th May from one of the Toronto area based Exam center.
    To my surprise, the exam did not start. The Pearson system started asking some Authentication code which the center person doesn't know. I was really upset of not being able to appear for the exam I prepared (you know the mindset of a test taker).
    I started following up with the Pearson Vue Customer care, they have created an incident and so far there has been no progress on this.
    The system doesn't let me reschedule or book the same exam. I want to try taking the exam from different center.
    The help from PearsonVue customer care is very average, I really oracle to intervene.
    Need help from the certification moderator.
    Thanks,
    Jay.

    user8607945 wrote:
    Hi,
    I registered for the 10g DBA II exam on 28th May from one of the Toronto area based Exam center.
    To my surprise, the exam did not start. The Pearson system started asking some Authentication code which the center person doesn't know. I was really upset of not being able to appear for the exam I prepared (you know the mindset of a test taker).
    I started following up with the Pearson Vue Customer care, they have created an incident and so far there has been no progress on this.
    The system doesn't let me reschedule or book the same exam. I want to try taking the exam from different center.
    The help from PearsonVue customer care is very average, I really oracle to intervene.
    Need help from the certification moderator.
    Thanks,
    Jay.Its good if you have an incident number, in general you can reply and ask if they can escalate this.
    (This the test center or you raise the incident, and do you have the incident number ? (if not get it) ).
    There has been a weekend, and in some places it was a holiday yesterday. (Probably not canada you will tell me).
    A Pearson VUE representative should be able to reschedule this for you. If you ask nicely enough they might (or might not) help with costs if you give a sob story about time wasted, money wasted, stress ....
    The key work is to request to ESCALATE the incident xxxxx.
    ( It may be that is a test center incident and they are trying to sort the test centers issues .... you need an incident to get a re-test which may be different (but related) ).
    ( I once had a failed test, and they were able to reschedule it for me somehwere else in 2hrs .... (where is also failed !!!! ).
    Pearson VUE will also need to be sure the problem is cleared before they reschedule you.
    ( In general they sort of come somewhat good in the end ... usually ).
    Edited by: bigdelboy on May 31, 2011 6:47 PM (Its also possille the movement of Sun/Java/MySQL exams from Prometric to Pearson may not be helping !!! .... new software release or increased storage or something)
    Edited by: bigdelboy on May 31, 2011 6:48 PM

  • Oracle distributed document capture service not started

    Oracle distributed document capture service not started
    and timeout

    I did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
    I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
    I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
    For the default document I have WebCapture.asp.
    The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
    I hope that this will help.
    Boris
    Edited by: tombo on 2012.03.16 06:32

  • Oracle BAM Plan Monitor does not start

    Hello all,
    the Oracle BAM Plan Monitor does not start in when I execute the start scripts.
    It tells my that the name of the service is invalid.
    Is there any possibility to check on the configuration for that service name?
    I have also checked on the event log of my Windows machine. There are a couple of strange entries coming from the Oracle BAM Engine:
    EventEngine: ADC Context exception ADC Server exception in GetUserGroups(): 2.
    ActiveDataCache: Caught exception while validating user NT-AUTORITÄT\SYSTEM: The RPC-Server is not available
    Maybe someone has a clue how to resolve this issue.

    Hi
    Are you using a valid user name and passwd to access the plan monitor?
    Did you set up a user called 'BAM' in your Enterprise Link? Normally this user will get created automaticaly while installing BAM. If it doesnt exist, you will have to create a user called BAM in EL with a blank password.
    Please follow the post installation document, that is having more details.
    Thanks
    Laj

  • Recurrning instance did not start at specified time

    Hi, All,
    Version BO XI R2.
    We have a daily recurrning schedule that starts at 02:30AM every morning (Deski and Crystal Reports).
    For some reason, today they did not start 02:30AM and were still on RECURRNING status in History tab though time has passed on around 03:30AM. But they ran immediately when I restarted the Connection, Deski/CR Job and Deski/CR Page servers.
    The schedule ran OK yesterday, but had the same issue day before as well.
    I have found no errors in events logs (application and system).
    CMS and job and page servers are in different Windows server and clustered environment.
    Can anybody got help me on this issue please ?
    Many thanks in advacne.
    Raghu

    May be try restarting the BO services once.

  • 'error 1069 - (The service did not start due to a logon failure) in BAM

    I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
    Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
    i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
    Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.

    Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
    All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
    "network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
    See "Troubleshooting Start Page Issues" for start page problems.
    As indicated in the Install Guide, you can use host names or IP addresses:
    "12. On the Configure location of Oracle BAM step, enter the host name or the IP
    address where each component is to be installed, even if it is not being installed at
    this time, then click Next."
    Regards, Stephen

  • Msg regarding "Dgraph did not start in startup timeout of 120 seconds"

    Hi All,
    Baseline update failed with following error message.
    "WARNING: Component 'Dgraph1' did not start in startup timeout of 120 seconds.
    SEVERE: Server component 'Dgraph1' did not start in the allotted startup time.Refer to component logs in /usr/local/endeca/EndAppR7/./logs/dgraphs/Dgraph1 on host MDEXHost1.
    Occurred while executing line 5 of valid BeanShell script:
    2|
    3| DgraphCluster.cleanDirs();
    4| DgraphCluster.copyIndexToDgraphServers();
    5| DgraphCluster.applyIndex();
    6|
    7|
    I've checked the dgraph1 logs and i don't see any difference than usual logs - like what i had yesterday.
    "all dgraph transactions completed"
    "Shutting down dgraph (pid=17398)"
    It had been running well as daily scheduled job since last 1 week.
    it has very small data to be indexed, just few MB.
    I've checked main application log, dgraphs logs, forge logs just in case, and process.0.log in PlatformServices. I don't see any useful detailed information to find out what causes this issue.
    And there was no locked flag on the application.
    to resolve this issue, i just started the Dgraph1 from Workbench and run the baseline update to make sure if it does not fail again. it ran well.
    But i'm wondering why... it happened.
    Can anyone kindly tell me the possible cause or where i can find out the root cause?
    Thanks,
    Edited by: julia on Oct 31, 2012 11:06 AM

    Julia,
    After you issue the start command (either as part of a baseline update or with a runcommand.sh Dgraph1 start), you should see your Dgraph1.log file (in [your_app_folder]/data/dgraphs/Dgraph1/) get updated with information related to dgraph startup.
    You should look there to see if your dgraph is actually starting in the 2 minute timeframe, the dgraph is up when you see the following line:
    pid=[SOME_NUMBER] listening for HTTP connections on port [SOME_NUMBER] at [SOME_DATE_TIME]
    If you don't see that, there is either an error starting the dgraph (you should see that in the same log file) or an error sending the command to start the dgraph (port 8888 not open, EAC Agent not running on the MDEX server, etc.).
    If you do see a successful message starting the dgraph, it's likely that the EAC Central Server (i.e. likely where you ran the command) was not able to determine that the dgraph started. It usually does this by issuing an admin?op=ping to the dgraph port so it's likely that port 15000 (or whereever your dgraph is running) is blocked between those two servers.
    Hopefully, that's enough for you to go on.
    Patrick

  • The exam did not start with Pearson VUE

    Hi,
    I registered IN Pearson VUE for exam 1Z0-007-ENU: Introduction to Oracle9i: SQL on 04th Jun 2011
    from one of the Egypt - Cairo area based Exam center.
    the exam did not start. The Pearson system started asking some Authorization code
    which the center person doesn't know
    The system In PearsonVUE.com doesn't let me reschedule or Cancel the same exam.
    Please I want to try taking the exam from different center.
    Thanks,

    user11363083 wrote:
    Hi,
    I registered IN Pearson VUE for exam 1Z0-007-ENU: Introduction to Oracle9i: SQL on 04th Jun 2011
    from one of the Egypt - Cairo area based Exam center.
    the exam did not start. The Pearson system started asking some Authorization code
    which the center person doesn't know
    The system In PearsonVUE.com doesn't let me reschedule or Cancel the same exam.
    Please I want to try taking the exam from different center.
    Thanks,Very similar senario to {thread:id=2231056}
    Suggestions:
    1) Read that thread:
    2) Ensure you have an incident number from Pearson VUE.
    3) I suggest don't try to rebook this yourself, Pearson VUE may be best to do it. They may need to see what the issue was with the first test and clear that down first.
    Edited by: bigdelboy on Jun 5, 2011 11:10 PM
    Contact Pearson via ( http://pearsonvue.com/oracle/contact/ ) or ( http://pearsonvue.com/contact/emea/customerservice/) ... and ensure they give you an incident number.
    If on the telephone use ( www.pearsonvue.com/oracle/locate ) to locate alternatives test centers so they can rebook it for you easily over the phone which Pearson will often do.

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

    Hi
    I just now updated dec 2013 c.u to sharepoint server 2010 sp2
     I get this error in event viewer when I browse  web applications  , they not open even
    Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
    SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
    Process Name: OWSTIMER
    Process ID: 3836
    AppDomain Name: DefaultDomain
    AppDomain ID: 1
    Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
    Active Endpoints: 2
    Failed Endpoints:1
    Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
    adil

    This messge I get initially I get two times (1)
    SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
    Process Name: w3wp
    Process ID: 4600
    AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
    AppDomain ID: 2
    Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
    Active Endpoints: 2
    Failed Endpoints:1
    Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
    aftert this message three times  (2)
    The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
    and after (3)
    The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
    after (4)
    Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
    and this time   I seen I am unable to browse web applications
    and
    Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
    adil

  • Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

    Hi,
    I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
    Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
    Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
    Since, I can't launch the ConnectIQ simulator app, I have this message in console :
    8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
    The data couldn’t be read because it isn’t in the correct format.
    <CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
    entries =>
      0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
      1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
    I have looked at this file and it looks like a binary plist
    bplist00ß^P^V^A^B^C^D^E^F^G^H
    ^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi    on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE    xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph    oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos    TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^    A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
    I guess it is a normal format but my system seems to be unable to read binary plist ?
    I tried some stuff with plutil
    plutil -lint Info.plist
    Info.plist: Unexpected character b at line 1
    Same for convert
    plutil -convert xml1 Info.plist
    Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
    I also try to download a fresh version of the connectIQ SDK and no changes.
    Any idea ?
    Thanks

    Step by step, how did you arrive at seeing this agreement?

  • Help me please! (The WebLogic Server did not start up properly)

    bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
    lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
    sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
    informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
    ant\ant.jar
    PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
    ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
    kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
    s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
    bin\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\[hostname]:[port]\console *
    <21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
    ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
    -20041118-1131-win-ia32 from BEA Systems, Inc.>
    <21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
    server is being started as the administration server.>
    <21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
    erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
    WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
    <21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
    nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
    ir\.\config.xml.>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
    eption thrown in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
    Reason: weblogic.management.configuration.ConfigurationException: Exception thro
    wn in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
    C:\bea\user_projects\domains\jspnedir>

    bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
    lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
    sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
    informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
    ant\ant.jar
    PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
    ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
    kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
    s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
    bin\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\[hostname]:[port]\console *
    <21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
    ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
    -20041118-1131-win-ia32 from BEA Systems, Inc.>
    <21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
    server is being started as the administration server.>
    <21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
    erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
    WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
    <21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
    nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
    ir\.\config.xml.>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
    eption thrown in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
    Reason: weblogic.management.configuration.ConfigurationException: Exception thro
    wn in operation getMBeansFromURL - with nested exception:
    [javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
    bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
    C:\bea\user_projects\domains\jspnedir>

  • An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...

    Hi All,
    We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
    Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
    We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
    Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
    Error:
    An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
    Regards,
    Joseph

    Ran into this error, and the password was correct. What the System Event Log said:
    Code SnippetEvent Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7041
    Date: 10/8/2008
    Time: 9:33:09 AM
    User: N/A
    Computer: ComputerName
    Description:
    The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
    Logon failure: the user has not been granted the requested logon type at this computer.
    Service: SQLSERVERAGENT
    Domain and account: DomainName\SQLAgent
    This service account does not have the necessary user right "Log on as a service."
    User Action
    Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
    If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
    ...sure enough it had been removed from the "Logon as a service" list. Hope this helps.

  • The WebLogic Server did not start up properly.

    Hi Everybody,
    I am quite new in BEA product, actually with weblogic integration. I get an issue when I tried to start Weblogic integration.
    I used Weblogic integration 8.5 on my Windows box and JDK 1.4.
    When I tried to start it I get the folowing error:
    The WebLogic Server did not start up properly.
    java.io.InvalidClassException: javax.management.MBeanAttributeInfo; local class
    incompatible: stream classdesc serialVersionUID = 7043855487133450673, local cla
    ss serialVersionUID = 8644704819898565848
    at java.io.ObjectStreamClass.initNonProxy(Ljava.io.ObjectStreamClass;Lja
    va.lang.Class;Ljava.lang.ClassNotFoundException;Ljava.io.ObjectStreamClass;)V(Un
    known Source)
    at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
    ss;(Unknown Source)
    at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
    (Unknown Source)
    at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
    ss;(Unknown Source)
    at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
    (Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
    nown Source)
    at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
    urce)
    at java.io.ObjectInputStream.readArray(Z)Ljava.lang.Object;(Unknown Sour
    ce)
    at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
    urce)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
    nown Source)
    at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
    urce)
    at java.io.ObjectInputStream.readObject()Ljava.lang.Object;(Unknown Sour
    ce)
    at weblogic.management.internal.TypesHelper.getMBeanInfo(TypesHelper.jav
    a:274)
    at weblogic.management.internal.TypesHelper.getAdminOrConfigMBeanInfo(Ty
    pesHelper.java:384)
    at weblogic.management.internal.ConfigurationMBeanImpl.<init>(Configurat
    ionMBeanImpl.java:137)
    at weblogic.management.AdminServer.<init>(AdminServer.java:59)
    at weblogic.management.AdminServerAdmin.initialize(AdminServerAdmin.java
    :245)
    at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:770)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
    at weblogic.Server.main(Server.java:32)
    Do you have some idea why I get this error while starting the server?
    Thank you in advance!

    First you can start witht he example server, after installation go to start menu --> example--> launch the examples. which will create a sample domain and brings up the server etc., If you want your own domain, using configuration wizard create a domain(follow the steps mentioned in edocs.bea.com) and bring up the server.
    -sadiga

Maybe you are looking for

  • Problems with P6 R8 Web Application

    Hi, I am currently experiencing problems accessing the web app. I have installed and configured the application (both MS1 and Admin Server) using the admin server configuration panel. My final stumbling block I believe is the correct URL to launch th

  • Webdynpro for ABAP treeBynesting table column Usage

    Hi Experts, I am trying to use treeByNesting table column in webdynpro for ABAP. Can anyone please share me the code. I am not getting how to use the recursive node. I need to develop a tree structure whose leaf if determined at run time, so thought

  • Still photos disappear from video

    I am just learning Premiere Elements for a newspaper where I work and designed a 4-minute video in which I dropped into the Timeline in 2 different place a series of four still photos. When I re-opened the file this morning, all the photos were missi

  • How to enable Arabic text in Photoshop cs3?

    Greetings everyone, I want my Photoshop cs3 to support Arabic text. I have searched the internet to find any clue but couldn't. Please help.

  • Why is the latest version of Firefox such CRAP??

    Features removed, UI setup not remembered Unable to put tabs where you want them Customisation of button bars screwed up etc etc etc etc