Oracle 11g R1 Automatic Installation shell scripts

Hy Guys,
Please can someone help me with: Oracle 11g R1 Automatic Installation shell scripts. A guide, how to or a link will be wellcome
Kind Regards
Easyman
Edited by: Easyman on Feb 2, 2010 3:58 AM

Hi Easyman,
sure, just have a look in $INSTALL_CONF directory. Files starting with swInst* are referencing a response file from $INSTALL_CONF/response directory. Either use a sample configuration file or add your own response file to install Oracle.
Cheers,
David
OCP 9i / 10g / 11g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php
P.S.: If you have more questions about oraToolKit please contact me at: http://www.oratoolkit.ch/faq.php

Similar Messages

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Deinstall Failed Oracle 11g 32-bit installation

I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?

user13515882 wrote:
I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?open Command Window & execute the BAT file from there

Start Oracle 11g Db automatically in windows

OS: windows
DB : Oracle 11.2.0.1.0
I created Oracle 11g Database manually . but while restarting the system ,database not starting
automatically. On begining of the script I created ORADIM with Manual option .
oradim -NEW -SID mydb -STARTMODE MANUAL -PFILE pfI try the follwing command. but it is not working
oradim -STARTUP -SID mydb -STARTTYPE srvc,inst
ORADIM -EDIT -SID mydb -STARTMODE auto I try the following command but it give the error message 'Unable to start service,OS error
1056'
ORADIM -EDIT -SID mydb -STARTMODE AUTO -SRVCSTART SYSTEM -SPFILEWhich command I need to use in my script start my db automatically.

OraFighter wrote:
ORA_finu_AUTOSTART TRUE
actually which command I need to use to edit ORADIM for autostartif you add "-STARTMODE AUTO " with PFILE and then set "ORA_finu_AUTOSTART TRUE" then it should be fine.

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle 11g R2 Windows Installation hangs at 100%

hi ,
I am trying to install oracle 11g server on a laptop with windows xp sp3 - 32 bit.
the installation goes smoothly till 100% and then get stuck at stage:
spawning 'D:\app\sujrai\product\11.2.0\dbhome_2\ODP.NET\bin\2.x\OraProvCfg.exe /action:config /product:odp /frameworkversion:v2.0.50727 /productversion:2.112.1.0'
I tried few times but it fails over and over again at this same stage. I am instaling in d:/ drive
Never faced this issue before. Would appreciate any comments on this.
thanks

Hi;
Please check log file for details. What is your xp version? Home version is not supported
Regard
Helios

Oracle 11g R2 Windows Installation issue

Hey everybody,
i was trying to install Oracle 11g R2 on a Windows Server 2008 64-bit machine. During the installation i am getting an error message multiple times (about 20 times) where it says it cannot find certain files like C:\app\ora11g\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\WFMLRSVCApp.ear and some other files too. If i click move on in the dialog box each time an error occurs the installation will succeed and finish successfully.
What am I doing wrong, do I have to change anything before installation starts?
I am using the correct 64-bit installation files i downloaded from the Oracle homepage...
Edited by: user12266335 on 07.04.2010 05:32

SKramer_MuM wrote:
Hi Hans,
know I found where it contains the information about the downloads. It only shows up when you click on the "See All", but it won´t show up if you directly download via the Disk 1 or Disk 2 link on the download page. Good point. I never would have believed noobs would stop at that page and not be curious about what other stuff might be available under 'See All'. Stuff like the 'De-install' package.
Since you didn't do it, I posted a comment/suggestion in the Download forum to put an additional note on the top 11gR2 download page.
What brings up more confusion is when you click on the "See All" button next to the download for the 32-bit Version of 11g R2 for Windows an error comes up. Worked for me.
You reported your error ... where?
So I think Oracle needs to improve its homepage a lot...If you have ideas there is a forum "Forum Home » Technology Network Community » Community Feedback and Suggestions" in which you you are welcome to submit comments.

Oracle 11g AMM (Automatic Memory Management)

Hi All,
I have a very powerful server 24 Processors with 6 cores each and 74 GB RAM for my production database. The server will host only one production database. I wanted to use AMM for this database and allocate maximum memory to Oracle by setting memory_target. By default /dev/shm is set 37 GB but I wanted to increase it least 55 GB. I know I can get this changed by my system admin but I wanted to know how much memory should leave for OS?
Please help me on sizing this.
Thanks,
Arun Singh

From MOS ID 169706.1
Automatic Memory Management
Starting with Oracle Database 11g, the Automatic Memory Management feature requires more shared memory (/dev/shm) and file descriptors. The shared memory should be sized to be at least the greater of MEMORY_MAX_TARGET and MEMORY_TARGET for each Oracle instance on the computer. To determine the amount of shared memory available, enter the following command: # df -k /dev/shm/
Note: MEMORY_MAX_TARGET and MEMORY_TARGET cannot be used when LOCK_SGA is enabled or with huge pages on Linux

Oracle 11G javaw Universal Installer error

Hey all,
I'm trying to install Oracle 11G on XP Pro and I'm having all sorts of problems. I downloaded the complete installer:
<b>Oracle Database 11g Release 1 (11.1.0.6.0)</b>
and I receive the following error when I attempt to install:
<b>The Java RunTime Enviroment was not found at bin/javaw.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.</b>
I installed JRE 1.4.2.18 rebooted the computer and tried to install again and still recieved the same error.
I checked the path to javaw.exe in the Java Control Panel and the path is there. I even disabled the one that was created with the install and still no luck.
I saw something in the fourms about the need to disable your firewall because the Oracle Installer writes to the registry. I am running Macafee and have disabled my firewall and still no luck.
Finally, back to the Java Control Panel. Under the "Java tab" --> then clicking the "view" button under the "Java Application Runtime Settings" there are two tabs, "User" and "System" that show paths for the Java software location on the system. Under the "user" tab there are two entries for the JRE 1.4 and 1.6 platforms, but only one entry (1.6) under the "system" tab, with no way for me to add a path to that tab. Please note I am using an Administrator account
Thanks for any assistance

Hmmm...you downloaded the entire .zip file and checked the length?
You unzipped the file with directory structures intact?
You ran the setup file at the top of the unzipped directory strucure?
You read the installation manual and made sure all prerequisites for installation are met?

Oracle Workflow Erroring on Function/Shell Script

We are in the process of upgrading databases and reimported all the OWB code into the new database.
Currently our OWB mappings all seem to run ok, but when I try to run a process flow I am hitting the following error
RPE--2075: Oracle Workflow failed to process the execution request for activity LD_EDW_MAIN:F_GET_DB_NAME. This may be because dependant objects have not yet been deployed. ORA-20010
F_GET_DB_NAME is a function and I checked and I see that the function executes properly
I also hit a similar error when trying to execute a shell script.
How would I go about deploying a function or a shell script?
Im relatively new to OWB and am being "force fed" learning since we lost our main OWB colleague.
Thank you

Thanks! for your reply.
I am using this API outside the workflow.I am using this API for iExpense to approve an Expense Report. In Expenses Workflow below are the processes:
1. AP_MANAGER_APPROVALPROCESS whihc is using NON_AME_APPROVAL_PROCESS and this is using REQUEST_APPROVAL_PROCESS and under this process there is a notification APPROVAL_REQUES. Now, I am completing this ACTIVITY as Approve and I am able to do that but problem is that REQUEST_APPROVAL__PROCESS is itself not getting completed and stuck here.
Please let me know how can I achieve that.
Thansks!
Sandy

Assistance needed during Oracle 11G R2 client installations in Windows 2008

Hi,
I am installing Oracle 11G R2 client in Windows 2008 R2 enterprise server. It has JR6 installed. But whenever I am launching the installer from OUI, I am getting the error 'Java: “Could not find the main class. Program will exit” and the installation is getting terminated. Any inputs/suggestions will be great for me.
Thanks in advance.

Hi,
are you able to run java manually? I.e. java --help in the cmd? Are your environment variables (JAVA_HOME) set properly?

Install Oracle 11g without APEX installation

Hi,
Since I don't want to use the embedded PL/SQL gateway as the default Web server, can I just install Oracle 11g database software with any APEX and PL/SQL gateway installation? I prefer to manually install APEX 3.2 to make sure that everything is clean.
Also, can Oracle 11g use Apache 2 version of the Oracle HTTP Server?
Thanks.
Andy

Andy:
You can simply install APEX 3.2 over the version that is already in the 11g database. The OHS supplied with 11g cn be used to access your APEX installation.
You can disable HTTP access to the database by executing the following as the sys user
exec dbms_xdb.sethttpport(0);
Varad

Automatically run shell script after publishing?

Is there any way to automatically run a shell script after publishing?
I would like to do some postprocessing on the remote server.
The remote server is not mobileme, so a tool like iwebenhancer will not work.
I will appreciate all kinds of tips and tricks and suggestions.
best regards, Gabriel.

So the Detect Change is to detect a change in the web page that the code is embedded, right?
The only workaround would be, if you can modify what's in the ChangeDetection window is to not automatically enter the page but put in a red note to enter the page you want to be notified about.
So instead of this:
You would have this:
where the visitor would have to copy and past the URL into the field. Obviously not automatic. But might work if you can modify what is said in the window and not have the page automatically be entered.

Oracle linux disk and folder shell script

Hi,
Shell script that shows you how to disk , folder.

user8053012 wrote:
du -sh /data/oracle/ |sort -r -n |head -20 how to write shell script ..Are you asking how to write a shell script that will execute the command 'du -sh /data/oracle/ |sort -r -n |head -20'?
If so, just use vi to create a new file, and put the command into the file. After saving the file, be sure to use 'chmod' to make it executable.
If that's NOT what you are asking, then your second post is just as obscure as your first.

Oracle Linux and Automatic Installation of Oracle Related Packages

G'day,
I recently decided to check out Oracle's Unbreakable Linux as I am/was thinking of switching to it for all my company's database deployments. What originally attracted me to Oracle Linux was that I though there would have been a kickstart, package or in the GUI install, a check box to install all of Oracle's dependencies.
When I installed it first, I manually selected a bunch of relevant packages, then installed any missing packages manually via a local YUM repository that I had made. Alas however, Oracle did not install correctly. So, I reinstalled, this time as a full install. Oracle then worked like a charm.
I also noticed, when editing /etc/sysctl.conf and /etc/securetty/limits.conf that these files had basically all ready been configured.
So, my question is, as I have had no luck using the search functionality here, is anyone aware of a kickstart argument, or an Oracle package that will install and in turn by way of dependencies, install all the necessary Oracle bits and pieces? Ideally, I would like to do this by way of kickstart as to automate as much of the process as possible.
If I can do this, then with some further testing, I will make the switch to Oracle's Linux for our Oracle deployments.
Cheers,
Conor

Yes, there is a great package called oracle-validated that is available that will pre-configured Oracle Enterprise Linux for installation using the Oracle Universal Installer. It ensures that things like sysctl.conf are all correct.
It should be available in the base download, so you can test it out. :)

Oracle 11g R1 Automatic Installation shell scripts

Similar Messages

Maybe you are looking for