Oracle 6i report generation in excel

hi all,
I am using oralce 6i. I want to generate oracle 6i report in "excel" instead of pdf. Can I use Oraccle forms and reports services for 6i version ?
Any help would be appreciate.
Regards,

Yes you can, Use desformat=delimited (instead of desformat=pdf) to create a csv file.

Similar Messages

Report generation toolkit excel, decimal?

Hello!
I have problem with the report generation toolkit excel!
I only gets 3 decimals in excel?
Ex. In labview = 0.0458943 when i send it to excel = 0.046.
I use Excel easy table.vi to transfer my array, should I use someting else?
Ive already tryid to increase the decimal in excel but i doesent work.
Labview 8.6
Report generation toolkit ev 113

Johan1300,
It sounds like you are writing a 2-D Array of doubles to excel. The Excel Easy Table.vi converts numerics to strings before writing data to excel. It is written to always use 3 decimal places. You need to convert your 2-D array of doubles to strings before writing the info to excel. Here are a couple of ways to make the conversion. The top method is based on how the Excel Easy Table.vi makes the conversion. Note that in both examples the format string constant sets the number of decimal places to 8.
Message Edited by Wayne.C on 04-08-2009 09:12 AM
Attachments:
2D Doubles to 2D String.png ‏6 KB

Report Generation Toolkit Excel errors and Libraries, Classes

Hello All,
I'm using the Report Generation toolkit Excel functions to handle some data and create graphs. I'm running into problems with the Add Worksheet.vi. At the very start of the vi, it closes the reference to Shapes. Occasionally, the Close Ref will throw an error. I haven't pinned down the exact cause yet (probably an invalid reference). The error itself wouldn't be a problem. Under other circumstances I would choose to ignore it and continue on. The problem is, this is stored in a Class Library controlled by NI.
Solutions I've tried without success:
1.) Make changes, and save the new vi with another name - can't do it because it's encapsulated and the Library is password protected.
2.) Install toolkit in something other than the default folder, so I can make changes and put it under Source Control - installer doesn't allow a new path to be entered.
3.) Change the vi where it is. This works until I move the source to another computer or I update Labview. At that point I lose all my changes.
Maybe it's just my inexperience with Classes, but I just don't see an elegant solution to this. Ultimately I'd like to copy the library off to somewhere else and put it under Source Control so I can make changes and additions to it (NI folks - providing a password to unlock the lib would be helpful...). Does anyone have suggestions on how I can accomplish this?
Thanks in Advance,
Doug

Hi Ben,
Sorry about the first post. After re-reading it, it sounds more like a frustrated rant than a request for help.
I've attached a simplified vi to try to illustrate the problem I'm having. I'm running Excel 2007. Please open the vi, then open Excel Add Worksheet.vi. At the start of the vi, Close Ref for Excel.Shapes occasionally throws an error. So far, I have not been able to consistently reproduce the error, so I can't really troubleshoot it. As I recall, the error code is 1045. The error is carried through the rest of the vi, causing invalid references to be written to Excel._Worksheet and Excel.Shapes, going out to NI_report.ctl.
So, here are the issues I'm running into (other than the error itself):
1.)Short of closing and reopening the file, there is no way to recover from the error. After the error, there is an invalid reference in Excel._Worksheet. There is no vi available to regenerate references in NI_report.ctl. I could easily write a vi to start from Excel._Application and re-read them, but because NI_report.ctl is in a Class library (controlled and passworded by NI), I can't add the vi to the library.
2.) I found that I could ignore the error by wiring around it. If I disconnect Error Out from Excel.Shapes Close Ref and wire Error In from Excel.Sheets.Count to the Error In of the Close Ref, everything works fine. Under other circumstances, I'd save this with a new vi name (because functionality changed) and continue on. But, because the vi is part of a Class library (controlled and passworded by NI), I can't do this. I can save the vi with the modifications (because Excel Add Worksheet.vi is not passworded), but if I pass the source off to someone else, they will have to make the same changes on their installation of the NI Report Generation Toolkit.
Again, I can't reproduce the error with any regularity. I've run the example vi I provided a few times and everything seems to work fine. If I come up with something, I'll repost. If you (or anyone) has an idea of what could be failing or if they've seen the problem, I'd appreciate a comment.
Thanks again,
Doug
Attachments:
Excel Fail.vi ‏15 KB

Report Generation for Excel does not work after using the Application Builder

I have a VI that writes data to an Excel file using the Report Generation Toolkit. I recently compiled the VI into a single Application (EXE) using the Application Builder. My VI runs its tests properly, but no data is written to Excel. What could be the cause? I don't receive any error messages.

Hi
I usually build exe-files, which sometimes also have report functionality.
Open the Application Builder and check the following things:
1. Add the following vis: _Word Dynamic VIs.vi, _Excel Dynamic VIs.vi They should be located in the directory ..\LabVIEW X.X\vi.lib\addons\_office in the llbs _wordsub.llb and _exclsub.llb (report1.jpg)
2. If you use an Installer, go to the Advanced Settings. There you can select some things to include in the Installer. Check if "NI Reports Support" is selected. (report2.jpg)
These are the things I always do, if I need reports and I never had problems up to now. I made two screen-shots of these settings.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
report.zip ‏25 KB

Report Generation Toolkit Excel Vi's do not run after creating an executable. What am I missing?

I have labview 8.5 and Report Generation Toolkit version 1.1.2. My vi works fine during development. When I make an executable or an installer the excel vi's do not work. I have seen this question posted before but it has always been for earlier revisions and the answers do not seem to apply with 8.5 and 1.1.2.

Hello ajh,
You will have to include Dynamic VIs in the executable you build. The following link has more information:
http://digital.ni.com/public.nsf/allkb/C38CE3F30542D65B86256F0E00740DD8
Prashant.

Report Generation Toolkit 打开现有的Excel 文件

用activeX打开excel我会，但是属性太复杂。不想用ActiveX的方式。
我有LabVIEW Report Generation Toolkit for Microsoft Office;
里面的例子都是生成新的excel 文件
如果要打开现有的excel文件，然后对里面的资料进行操作，可以透过这个toolkit实现吗?

这个论坛没有人气吗？

Report generation Toolkit: Excel report functions error -2146827284

Hi,
I'm trying to create an automated report using excel functions from the report generation toolkit in labVIEW. When I run the program that generates the report first time round (the report consists of several worksheets, each worksheet is added onto the report at a diffferent state in a state machine) it always works fine and no error is generated. However, when I run the program again it will infrequently (sometimes it does, other times it will not) generate the undefined error -2146827284, this is coming from one of the excel report functions and it cannot find it on highlight execution mode.
Does anyone know anything about this error, why it occurs, how to prevent it?
I would appreciate any help.
Thanks,
Rowan

mebels_cti wrote:
Found something that helped; https://forums.ni.com/t5/LabVIEW/Error-code-quot-2146827284-quot-when-trying-to-open-an-Excel/m-p/20...
Excel still open
So I added this;
You should use the Application Quit method instead of killing the task. I doubt this is the cause of your issue.
Ben64

Report generation with excel (picture)

hello,
I need to insert pictures into excel. I have already printed the report generation toolkit for microsoft office and downloaded Picture_To_XL_(6i). But I have nothing to do the report : for in instance write jpeg file (excel).vi,read jpeg file (excel).vi, read png file(excel).vi...
Where can I finf this ? I have 3 Cds with labview:Labview 7 express, national instruments device drivers and DIAdem.
I have download an install update bur does not work.
How can I do?
thank you to help me
labview 7.0

You can get an excelent Excel Active-X control from the gentleman at the following e-mail address:
[email protected]
Also, I have included a PDF description of the item. It is for sale, but it is CHEAP, and well worth the low asking price.
Attachments:
excelocx.pdf ‏248 KB

Report generation, inserting Excel formulas

Hi everyone,
We just acquired the Report Generation Toolkit. I've got the basic report figured out but I'm stymied at inserting formulas where I need to. The report will have one row added when data is acquired. At that time I need to insert two formulas each referring to the cell immediately to the left of the cell it's in. I've found examples that put formulas at the end of the sheet but none that plugs them in as the data is being saved. Does anyone have an example of how this can be done?
Thanks

This snippet creates a report with the value 3 in a cell (as it turns out, it's cell A1). Note that because I'm using Excel Easy Table, I need to turn my scalar (3) into a 2D array. Easy Table gives me the cell address just to the right of the insertion (where the Formula will go -- by subtracting one from the Column, I can get back the Excel Address (A1) of the "cell to the left". I then create a formula (starting with "=") that doubles this cell and adds 0.5, then use Excel Insert Formula to put it into the Worksheet, where it becomes 6.5.
Bob Schor

Report generation using Excel

I created a VI for making a report in Excel. It works correctly, however when I built an executable files, it is unable to do the processing and announce ‘error 7 open VI reference in Excel’! I was wondering if anybody can guide me that how I can fix this error. Many thanks

Hello,
I think that if you add the Excel/Word dynamic VIs to your project, you will see them in the VI list when building your EXE, which would allow you to add them to your application as dynamic VIs. I'm guessing you currently don't have the Excel/Word dynamic VIs added into your project yet.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Report Generation Toolkit - Excel Templates

Hi, I've created an Excel Template with a single formatted
worksheet. I need to generate a report with a varying number of
worksheets but all based on the same template. I tried it using
the ADD WORKSHEET vi but this just adds an unformatted worksheet.
How can I use the template's worksheet format for each worksheet that
gets added?
Thanks,
Charlie

Hey Guys,
I know this post if kind of old but I hope maybe one of you can help me out. I'm using an invoke node similar to what is above to print out an Excel spreadsheet to the default printer. My issue is that when I try to print from the spreadsheet from the executable, the executable crashes. I know it is that invoke node. The reason why I say that is because until recently I had two development computers, one running on Windows 7 LabVIEW 2010, and one running on Windows XP LabVIEW2010. The original .exe was built with the XP machine, when I tried to make some changes with the Windows 7 machine and open the project it would say that there was a missing connection to the invoke node even though I did not touch that part of the application. I would then remove the invoke node, add it again and it would clear the error for whatever reason. I would then build the .exe with the Windows 7 machine and when it would run, the application would crash at the point where it goes to print the spreadsheet. I got around this by building the .exe with the Windows XP machine, and it worked fine without any issues. However, my Windows XP machine cra**ed out so i'm no longer able to build the .exe on the XP machine . I needed to make some changes to the .exe not anything involving this section of the code and for whatever reason when the application goes to print it crashes. I get some criptic crash report from Windows that is pretty much useless. I think its a Windows thing. This was workign correctly though until I did a build on the Windows 7 machine.
Attachments:
Printout Invoke Node Excel.png ‏70 KB
crash1.png ‏22 KB
crash2.png ‏23 KB

Need help with Report Generation Toolkit: Excel Set Cell Format.vi

Hi people,
I've been searching and found this old thread of someone asking what is the input parameter "Number format". And I dont know what should I put in there. I've tried so many possibilities, but nothing works so far, such as:
0,0
0,?
0,#
#,0
?,0
and also with @, doesnt works. Where would I find help about this parameter?
I'm using Excel2003, german version, thus local decimal separator is a comma.
I also found this help from NI, but seems doesnt help me either. Do I miss something important?
thanks,
Yan.

Hi,
I've used your suggestion and some numbers in excel doesnt need to get "right click, change to numbers" anymore (green indicators on the left-top side in some cells are gone). But, I think its still not a number, because I cant use a simple formula, such as in cell A10 I type "= A1/2" (cell A10 equals cell A1 divided with 2) . I got error which says its not a number.
Well, but other thing is found, any format-string I put in the input of Excel Set Cell Format.vi, such as #,########, will be shown the same as "customize #,########" if I right click in a cell in excel and click "Zellen formatieren" (formatting cell). But however, the numbers are still depends on the input of the format I put in the Append Table to Report.vi.
regards,
Yan.

LabView Exe Application file not launch Excel application for report generation

Dear All,
I created one LabVIEW application file for report generation (using Excel Template).
While I run the program in programming mode it works well and create the report file in the specified path.
After creation of the application file(exe), it gives the correct path of where the excel template is placed. The same path is given to New Report.vi, but it gives the error 'File Not Found'.
Tell me, is any other configuration required for generating Excel reports? (During exe application mode)
Give me the solution.
Thank You
Jegan.

Hello,
Most likely you are encountering a problem of stripping and/or building paths. Probably the easiest thing to do is put a couple indicators on your front panel for the path or paths you care about, build your exe, and make sure you are really using the path you'd like. If you always put the report at some deterministic place relative to the exe (that is, even it the exe is moved, it will go with the exe and remain in the same relative path location, then you can use the Current VIs Path funtion found in the ... File I/O -> File Constants palette as a start path (where you will want to strip at least the exe name off of course).
I think this will bring some clarity to the issue!
Best Regards,
JLS
Best,
JLS
Sixclear

Std Oracle Report output to Excel Sheet

I'm supposed to make changes to Standard Oracle Report such that the changes of Oracle Standard Report should be Excel output. One of the ways of doing this is to develop the whole report again in Discoverer as it has the feature of outputing into Excel Sheet. I would appreciate if someone can suggest me other ways of achieving it.
Thanks
Bobby

Hi,
even i am trying to do the same with my reports. Though it is possible to convert the reports to excel using the DESFORMAT attribute on the reports service, I am not able to preserver all the format in the excel sheet.
I do not want to use rep2excel but want to implement the same idea on my reports service. Is it possible
thanks

Problem for Report Generation Toolkit for excel 2000

Hi all,
Now I am Developing my program with Report Generation Toolkit 1.1.0 and Labview 7.1.
In my computer I am using Excel XP, and there is not any problem. But when I build to
a exe file, and use in a computer with Excel 2000, it didn't work.
And I try to check the source file in this computer, I found that there any some connection
error. And this is caused by the active X class. As I know Excel 2000 is using Microsoft Excel
Object Library 9.0, but i cannot find it in the list of active x. So it is using Microsoft Excel Object
Library with a very old verison. So in the property node there are missing functions, such as the
UsedRange in _Worksheet in the Excel_Get_Range.vi. However, In VBA, I can find the 9.0 Library.
Is it the problem of 9.0 library? How can I solve the problem? How can I upgrade the library to 10.0?
Thanks.
Regard,
Ryan

Hi Mike,
Since my program is for all the staff in office, everyone may use it.
I cannot call the whole office to upgrade the excel to XP.
And I think Report Generation Toolkit is alway support Excel 2000,
since the old version of it is not support for Excel XP.
Regard,
Ryan

Oracle 6i report generation in excel

Similar Messages

Maybe you are looking for