Oracle 8.1.7 and Redhat 6.2EE SIGSEGV when running netasst

I've managed to install this ok - at least the core server is fine.
Unfortunately when I attempt to run almost any of the graphical java admin. utilities, eg oemapp, dbasst, netasst, owm. They fail with something like:
SIGSEGV received at befffac0 in /usr/X11R6/lib/libXt.so.6. Processing terminated
Writing stack trace to javacore1268.txt ... OK
The funny thing is dbasst actually runs about 1% of the times I run it. The rest never do.
I can run over applications that use X11 fine.
I am using the JRE that came with the oracle install (IBM1.1.8)
I have also tried other JREs.
I have also tried unset LANG (as mentioned in other posts)
Please help - I'm really stuck.

I've finally solved it!
I downloaded the following jre from blackdown:
jre118_v3-glibc-2.1.3-DYNMOTIF.tar.bz2
It's the only one that seems to work (and god, have I tried them all!)
I've no idea what the DYNMOTIF means (apart from being something to do with Motif - but you don't have to be a linux guru to work that out ;)) - but, hell, it works.
And after sitting in front of this machine for 3 days trying to deal with Oracle's, frankly PATHETIC install, that's so full of holes and bugs, that's all I care about..
The one bundled with Oracle 8.1.7 doesn't work with Linux redhat 6.2EE.
Don't oracle test their software?
Anyway I'm happy now, and I'm leaving this in case anybody else has the same problem.
Thanks for everyone's help.

Similar Messages

Large Data file problem in Oracle 8.1.7 and RedHat 6.2EE

I've installed the RedHat 6.2EE (Enterprise
Edition Optimized for Oracle8i) and Oracle
EE 8.1.7. I am able to create very large file
( > 2GB) using standard commands, such as
'cat', 'dd', .... However, when I create a
large data file in Oracle, I get the
following error messages:
create tablespace ts datafile '/data/u1/db1/data1.dbf' size 10000M autoextend off
extent management local autoallocate;
create tablespace ts datafile '/data/u1/db1/data1.dbf' size 10000M autoextend off
ERROR at line 1:
ORA-19502: write error on file "/data/u1/db1/data1.dbf", blockno 231425
(blocksize=8192)
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
Additional information: 231425
Additional information: 64
Additional information: 231425
Do anyone know what's wrong?
Thanks
david

I've finally solved it!
I downloaded the following jre from blackdown:
jre118_v3-glibc-2.1.3-DYNMOTIF.tar.bz2
It's the only one that seems to work (and god, have I tried them all!)
I've no idea what the DYNMOTIF means (apart from being something to do with Motif - but you don't have to be a linux guru to work that out ;)) - but, hell, it works.
And after sitting in front of this machine for 3 days trying to deal with Oracle's, frankly PATHETIC install, that's so full of holes and bugs, that's all I care about..
The one bundled with Oracle 8.1.7 doesn't work with Linux redhat 6.2EE.
Don't oracle test their software?
Anyway I'm happy now, and I'm leaving this in case anybody else has the same problem.
Thanks for everyone's help.

Oracle 8.1.6 and RedHat 6.1problem :-(

Im run ./runInstaller and have following
error:
SIGSEGV received at bfffefe4 in /Install/Oracle8iR2/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/linux/native_threads/libawt.so. Process
ing terminated
Writing stack trace to javacore2055.txt ... OK
Please help !

Hi, I cannt answer your question, but u may help me! I have installed Oracle 8.1.6, then how can I or what is now to do to start oracle?
please answer to : [email protected]
thanks a lot!

DAQ Input Signal kept rising and stop at Max Voltage when run with nothing attached

I just installed PCI 6229 card and a BNC 2110 (Labview 8.6v). When I started the DAQ Input, the signal kept rising and stop at max Voltage (10V) when run with nothing attached (instead of fluctuating at around 0). Just wondering what's wrong with it and how to solve it. Terminal configuration was "Differential"
I just created an input DAQ with a scope and while loop to look at it. Please let me know if I do anything wrong
Thanks
Solved!
Go to Solution.

I just re-read your original post. Why do you have the terminal setting to differential? This sounds like a single ended setup to me. Change the terminal setting to RSE. With a differential setting. you need to connect one source to AI1 and another source to AI9. The difference between the two will be reported. With RSE, only AI1 will matter and the voltage with respect to ground will be reported. Make sure you have your AO ground tied to your AI ground.
Message Edited by tbob on 06-15-2010 05:44 PM
- tbob
Inventor of the WORM Global

Oracle 8.1.6 and Redhat 7.2 kernel 2.4.9-34

During installation when the genclntsh scripted is called I'm getting the following linking error:
Building client shared library libclntsh.so ...
Call script /home/oracle/product/8.1.6/bin/genclntsh ...
/home/oracle/product/8.1.6/bin/genclntsh
/lib/libc.so.6: undefined reference to `_dl_lazy@GLIBC_2.1.1'
/lib/libc.so.6: undefined reference to `_dl_dst_substitute@GLIBC_2.1.1'
/lib/libc.so.6: undefined reference to `_dl_out_of_memory@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_dl_relocate_object@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_clktck@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `__libc_enable_secure@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_catch_error@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_platformlen@GLIBC_2.1.1'
/lib/libc.so.6: undefined reference to `_dl_lookup_versioned_symbol_skip@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_lookup_versioned_symbol@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_mcount@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_dst_count@GLIBC_2.1.1'
/lib/libc.so.6: undefined reference to `_dl_initial_searchlist@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_start_profile@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_lookup_symbol@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `__libc_stack_end@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_argv@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_dl_cpuclock_offset'
/lib/libc.so.6: undefined reference to `_dl_loaded@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_origin_path@GLIBC_2.1.1'
/lib/libc.so.6: undefined reference to `_dl_check_map_versions@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_dl_map_object@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_main_searchlist@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_debug_mask@GLIBC_2.2.3'
/lib/libc.so.6: undefined reference to `_dl_load_lock@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_dl_profile@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_debug_state@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_init_all_dirs@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_r_debug@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_unload_cache@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_signal_error@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_debug_printf@GLIBC_2.2.3'
/lib/libc.so.6: undefined reference to `_dl_init@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_dl_all_dirs@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_dl_map_object_deps@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_nloaded@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_dl_profile_map@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_profile_output@GLIBC_2.1'
/lib/libc.so.6: undefined reference to `_dl_pagesize@GLIBC_2.2'
/lib/libc.so.6: undefined reference to `_dl_lookup_symbol_skip@GLIBC_2.0'
/lib/libc.so.6: undefined reference to `_dl_fpu_control@GLIBC_2.1'
/usr/lib/libdl.so: undefined reference to `_dl_catch_error'
/lib/libc.so.6: undefined reference to `_dl_global_scope_alloc@GLIBC_2.1'
Built /home/oracle/product/8.1.6/lib/libclntsh.so ... DONE
gcc -o oidldapd -L/home/oracle/product/8.1.6/ldap/lib/ -L/home/oracle/product/8.1.6/lib/ -o oidldapd -L/home/oracle/product/8.1.6/ldap/lib/ -L/home/oracle/product/8.1.6/lib/ /home/oracle/product/8.1.6/ldap/lib/s0gslsrv.o -lgslssf8 -lgslssb8 -lgslssf8 -lgsldb8 -lsgsl_s8 -lgslber_s8 -lgslavl8 -lgslr8 -lldapclnt8 \
-lpthread -lclntsh `cat /home/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/product/8.1.6/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/product/8.1.6/lib/sysliblist` -ldl -lm `cat /home/oracle/product/8.1.6/lib/sysliblist` -Wl,-rpath,/home/oracle/product/8.1.6/lib:/lib:/usr/lib -lm `cat /home/oracle/product/8.1.6/lib/sysliblist` -ldl -lm -Wl,-rpath,/home/oracle/product/8.1.6/lib:/lib:/usr/lib
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [oidldapd] Error 1

Ok, I was able to install O8i 8.1.6.1.0 just fine, but guess what you got to do? You got to turn off your num lock, go figure. If you don't turn of your num lock all buttons are frozen on the U installer.
--Charles

ORACLE 8.1.6 on Redhat 6.2 SIGSEGV problem

Hi!
I have the same problem which others have too but I could not find any solution.
The starnge is that I have two machine with redhat 6.2 (not the same kernel anyway) and then installer on one is works fine but doesn't on the other.
Brand new installation nothing kernel compilation or something else.
Please drop a mail into my private box too if you have any idea: fehers<at>freemail<dot>hu
thnx. Sanya
SIGSEGV received at bffff164 in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/linux/native_threads/libawt.so. Processing terminated

I have reinstalled JDK118 thaking it from www.blackdown.org and all goes fine!
By

OC4J and Oracle forms causes ie or firefox to not respond when running form

When I run a form in Oracle Forms 10g, I have OC4J running, and have the following displayed:
E:\Windows\system32>E:\DevSuiteHome_5\jdk\bin\java -Doracle.security.jazn.confi
g=E:\DevSuiteHome_5\j2ee\DevSuite\config\jazn.xml -Doracle.home=E:\DevSuiteHome_
5 -DORACLE_HOME=E:\DevSuiteHome_5 -jar E:\DevSuiteHome_5\j2ee\home\oc4j.jar -use
rThreads -config E:\DevSuiteHome_5\j2ee\DevSuite\config\server.xml
07/11/20 23:11:44 Warning: Error reading transaction-log file (/E:/DevSuiteHome_
5/j2ee/DevSuite/persistence/transaction.state) for recovery: premature end of fi
le
07/11/20 23:11:44 Forced or abrupt (crash etc) server shutdown detected, startin
g recovery process...
07/11/20 23:11:44 Recovery completed, 0 connections committed and 0 rolled back.
07/11/20 23:11:44 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)
initialized
07/11/20 23:18:10 FormsServlet init():
configFileName: E:\DevSuiteHome_5/forms/server/formsweb.cfg
testMode: false
I am running vista, and have the latest version of the dev suite. Does anybody know how I can fix this problem?

You cannot use Internet Explorer on Windows Vista to run Web Forms.
<p>But you CAN run web forms through Netscape or Firefox. But you first need to disable Java in the browser.
<p>And to run OC4J on Vista, you need to set its compatibility mode to Windows XP.
<p>See my notes on OC4J and "Browser Settings" in this thread:<br>
Forms 10g installed and running on Windows Vista

Oracle DRM v11.1.1.1.0 Error message when running a book

I am running a book export data to an Oracle table and the the error message "The following Export(s) ran with no results" and it lists all of the exports found in the book. When I run each export individually they each run to success and push the data to the expecting tables. I am not seeing anything that would be set differently to return different results. Any help is greatly appreciated.
Kind regards,
Charlie

Hi iam new to drm ,installedon my lappi,and when i try to configure,i am understanding the the pre-requisites
Oracle Database Prerequisitesl If you are using an Oracle RAC database system, you must create the tablespaces with the
appropriate RDBMS software prior to installation.
Whether the scripts are run automatically or manually, the user must be logged in as
SYSTEM. When you manually execute the database scripts, the DRM_DB user is created in
the RDBMS (if it does not already exist). The DRM_DB user is assigned a default tablespace
of DRM_DATA and must have access rights to the following items:
Default tablespace (usually DRM_DATA)
UNLIMITED TABLESPACE
CONNECT
CREATE ANY SEQUENCE
CREATE USER
ALTER USER
====================================================
When you manually execute the database scripts, the user is logged in as the schema owner
which, has a default tablespace of DRM_DATA. This user must have access rights to the
following items:
m Default tablespace (usually DRM_DATA) — this can be done after the install if the
tablespaces were not created.
UNLIMITED TABLESPACE
DBA
CONNECT
CREATE ANY SEQUENCE
CREATE USER
ALTER USER
=========================================================
according to the previous understanding of hyperion modules.this time i created a new user "DRM_DATA" under orcl DB
and provide him dba,connct,view,procedure,trigger,session roles..
and when i try to configure it then it states some error//////

Spark Classes and Skins not being included when running FlexUnit task via Ant

I have a series of unit tests that run on a spark component. This spark component has a custom skin defined for it, and that is working beautifully.
Inside that component is a spark list... By default, after digging into the list code, spark lists should use a default skin called "BorderContainerSkin". When I run the application that uses this component directly (whether compiled via FlashBuilder or via Ant/Hudson), the component itself runs and looks exactly like I would expect. When I run my unit tests in the browser (via Run As Web Application command on my TestRunner), the unit tests all perform as expected.
However, when I run the FlexUnit tests via Ant (either through windows non-headless, or linux headless), an exception is thrown with the following error:
Error: Skin for FromToList132.FromToListSkin133.VGroup134.fromList cannot be found.
    at spark.components.supportClasses::SkinnableComponent/attachSkin()[E:\dev\4.x\frameworks\pr ojects\spark\src\spark\components\supportClasses\SkinnableComponent.as:632]
    at spark.components.supportClasses::SkinnableComponent/validateSkinChange()[E:\dev\4.x\frame works\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:405]
    at spark.components.supportClasses::SkinnableComponent/commitProperties()[E:\dev\4.x\framewo rks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:419]
    at spark.components.supportClasses::ListBase/commitProperties()[E:\dev\4.x\frameworks\projec ts\spark\src\spark\components\supportClasses\ListBase.as:785]
    at spark.components::List/commitProperties()[E:\dev\4.x\frameworks\projects\spark\src\spark\ components\List.as:907]
    at mx.core::UIComponent/validateProperties()[E:\dev\4.x\frameworks\projects\framework\src\mx \core\UIComponent.as:7933]
    at mx.managers::LayoutManager/validateProperties()[E:\dev\4.x\frameworks\projects\framework\ src\mx\managers\LayoutManager.as:572]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:730]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
(Note: fromList is the id of the spark list used in the FromToList component.)
The issue is that the "BorderContainerSkin" class isn't ever getting imported along the way. I did several things that worked to "fix" the problem, but they are all hacky and don't explain the root problem:
1- If I explicitly import that skin into my test file, then everything works great.
2- If I add the <includes> directive into my mxmlc task in the Ant file, and again specifically call out that skin class, then again it will work.
However, how would I know what skins from the spark library are going to get included and which aren't? How would I know that a default skin isn't included or where to find it or even what it is?
It seems like either I'm missing something in my Ant file or there is a serious bug here with the FlexUnit task. Can anyone shed light on if this is a known issue, any permanent fixes (that don't involve keeping track of a long list of strings of class references), or anything that I might be missing?
Thank you for any help!

Guessing the ant tasks aren't forcing the include of the spark skins libraries... which is a little silly. I would assume the compiler would take care of this but it is something we can investigate...
Not 100% sure as to why, but this is what it sounds like.
Mike

Quicktime Plugin crashes and Window size not correct when running a course from an LMS (Coursemill)

I am trying to run a course from an LMS (Coursemill) and a couple issues are occurring.
First, the quicktime plugin crashes, therefore the mp3 sound of the course does not play. When I reload the page, I get an "Unable to find API adapter" error message and the page won't load.
Also, the predetermined window size does not work properly and I end up with vertical and horizontal scroll bars which I do not want.
These issues are of high importance and need a solution ASAP. Please contact me.

If you haven't already visited the using QuickTime Plugin with Firefox KB article, I would recommend you first start there. If your problem still persists & no solution is found after referencing it just reply back to this response & we will go another route.
See:
[[Using the QuickTime plugin with Firefox]]

Logical Reads are very high when run as sproc and very less logical reads when run as a script

Hello
Have a question,
when i execute a sproc. i get a very high logical reads count and when i run the same sproc converted into script it has very low logical reads what does it mean..

I would like you to check query plan during ad-hoc run versus stored procedure execution. As other pointed out it could be due to parameter sniffing.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

How compile OCCI Demo of Oracle 9i with gcc on Redhat Linux 9?

How compile OCCI Demo of Oracle 9i with gcc on Redhat Linux 9?
When I use gcc-3.22 compile,error:undefined reference to 'typeinfo for oracle:occi:SQLException'.
Reputedly gcc-2.95 or gcc-2.96 is the official supported version , did you try it?
Can you help me compile it successfully?
Thank you!
Alex Clark

For details
compile cmd:make -f demo_rdbms.mk occipool
compile result:
make -f /opt/oracle/product/9.2.0/rdbms/demo/demo_rdbms.mk buildocci
EXE=occipoo
l OBJS=occipool.o
make[1]: Entering directory `/opt/oracle/product/9.2.0/rdbms/demo'
/usr/bin/g++ -L/opt/oracle/product/9.2.0/lib/
-L/opt/oracle/product/9.2.0/rdbms/
lib/ -o occipool occipool.o -locci -lclntsh `cat
/opt/oracle/product/9.2.0/lib
/sysliblist` -ldl -lm
occipool.o(.gcc_except_table+0xe8): undefined reference to `typeinfo for
oracle:
:occi::SQLException'
occipool.o(.gnu.linkonce.t._ZN8occipoolC1Ev+0x18): In function
`occipool::occipo
ol[in-charge]()':
: undefined reference to
`oracle::occi::Environment::createEnvironment(oracle::o
cci::Environment::Mode, void*, void* (*)(void*, unsigned), void* (*)(void*,
void
*, unsigned), void (*)(void*, void*))'
occipool.o(.gnu.linkonce.t._ZN8occipoolD1Ev+0xf): In function
`occipool::~occipo
ol [in-charge]()':
: undefined reference to
`oracle::occi::Environment::terminateEnvironment(oracle
::occi::Environment*)'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x355): In function
`occipool::
select()':
: undefined reference to
`oracle::occi::SQLException::SQLException[in-charge](or
acle::occi::SQLException const&)'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x395): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::getErrorCode() const'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x3db): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::getMessage() const'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x44f): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::~SQLException
[in-charge]()'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x466): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::~SQLException
[in-charge]()'
collect2: ld returned 1 exit status
make[1]: *** [buildocci] Error 1
make[1]: Leaving directory `/opt/oracle/product/9.2.0/rdbms/demo'
make: *** [occipool] Error 2

OUI - Oracle Universal Installer problem and questions

Hi.
I have Oracle9i Release 9.2.0.6.0 installed on my pc, its connecting to Oracle on a AIX server. I am trying to installed the odbc drivers I have downloaded from the oracle website.
Odbc - 9.2.0.6 , but when running the installer it is version 2,2 and says i need 2.3 .
I dont see anywhere to download the newer version of the installer?
And how do I run the installer - where is it located on my machine?
thanks
in
advanc e

If u have metalink access then try there.
I know that latest OUI ver is 2.2.0.18. This patch is available in metalink or from download.oracle.com

Performance issues with Oracle EE 9.2.0.4 and RedHat 2.1

Hello,
I am having some serious performance issues with Oracle Enterprise Edition 9.2.0.4 and RedHat Linux 2.1. The processor goes berserk at 100% for long (some 5 min.) periods of time, and all the ram memory gets used.
Some environment characteristics:
Machine: Intel Pentium IV 2.0GHz with 1GB of RAM.
OS: RedHat Linux 2.1 Enterprise.
Oracle: Oracle Enterprise Edition 9.2.0.4
Application: We have a small web-application with 10 users (for now) and very basic queries (all in stored procedures). Also we use the latest version of ODP.NET with default connection settings (some low pooling, etc).
Does anyone know what could be going on?
Is anybody else having this similar behavior?
We change from SQL-Server so we are not the world expert on the matter. But we want a reliable system nonetheless.
Please help us out, gives some tips, tricks, or guides
Thanks to all,
Frank

Thank you very much and sorry I couldnt write sooner. It seems that the administrator doesnt see the kswap going on so much, so I dont really know what is going on.
We are looking at some queries and some indexing but this is nuts, if I had some poor queries, which we dont really, the server would show pick right?
But he goes crazy and has two oracle processes taking all the resources. There seems to be little swapping going on.
Son now what? They are all ready talking about MS-SQL please help me out here, this is crazy!!!
We have, may be the most powerful combinations here. What is oracle doing?
We even kill the Working Process of the IIS and have no one do anything with the database and still dose two processes going on.
Can some one help me?
Thanks,
Frank

Using long vs. clob datatype with Oracle 8.1.7 and interMedia

I am trying to determine the best datatype to use for a column I
wish to search using the interMedia contains() function. I am
developing a 100% java application using Oracle 8.1.7 on Linux.
I'd prefer to use the standard JDBC API's for PreparedStatement,
and not have to use Oracle extensions if possible. I've
discovered that there are limitations in the support for LOB's
in Oracle's 100% java driver. The PreparedStatement methods
like setAsciiStream() and setCharacterStream() are documented to
have flaws that may result in the corruption of data. I have
also noticed that socket exceptions sometimes occur when a large
amount of data is transferred. If I use the long datatype for
my table column, the setCharacterStream() method seems to
transfer the data correctly. When I try to search this column
using the interMedia contains() function, I get strange
results. If I run my search on Oracle 8.1.6 for Windows, the
results seem to be correct. If I run the same search on Oracle
8.1.7 for Linux, the results are usually incorrect. The same
searches seem to work correctly on both boxes when I change the
column type from long to clob. Using the clob type may not be
an option for me since the standard JDBC API's to transfer data
into internal clob fields are broken, and I may need to stick
with standard JDBC API's. My customer wishes to purchase a
version of Oracle for Linux that will allow us to implement the
search capability he requires. Any guidance would be greatly
appreciated.

I've finally solved it!
I downloaded the following jre from blackdown:
jre118_v3-glibc-2.1.3-DYNMOTIF.tar.bz2
It's the only one that seems to work (and god, have I tried them all!)
I've no idea what the DYNMOTIF means (apart from being something to do with Motif - but you don't have to be a linux guru to work that out ;)) - but, hell, it works.
And after sitting in front of this machine for 3 days trying to deal with Oracle's, frankly PATHETIC install, that's so full of holes and bugs, that's all I care about..
The one bundled with Oracle 8.1.7 doesn't work with Linux redhat 6.2EE.
Don't oracle test their software?
Anyway I'm happy now, and I'm leaving this in case anybody else has the same problem.
Thanks for everyone's help.

Oracle 8.1.7 and Redhat 6.2EE SIGSEGV when running netasst

Similar Messages

Maybe you are looking for