Oracle 8i: Problem with connectong trough firewall/connection manager
Hello.
i've been trying to make this work for I think 2 weeks now. with no luck. if I go around the firewall/connection manager. everything works fine.
it runs on win xp. port 1521 and port 1630 has been forwarded.
conn manager log:
(TIMESTAMP=22-JUN-2010 16:35:27)(EVENT=10)(VERSION=8.1.7.0.0)
(TIMESTAMP=22-JUN-2010 16:35:27)(EVENT=36)(rule_list= (rule=(src=xx.xx.46.145)(dst=oracle-server)(srv=*)(act=accept)))
(TIMESTAMP=22-JUN-2010 16:35:27)(EVENT=32)(PARAMETER_LIST=(MAXIMUM_RELAYS=1024)(RELAY_STATISTICS=yes)(AUTHENTICATION_LEVEL=0)(LOG_LEVEL=4)(SHOW_TNS_INFO=yes)(ANSWER_TIMEOUT=0)(MAXIMUM_CONNECT_DATA=1024)(USE_ASYNC_CALL=yes)(TRACING=no)(TRACE_DIRECTORY=default)(MAX_FREELIST_BUFFERS=0)(REMOTE_ADMIN=no))
(TIMESTAMP=22-JUN-2010 16:35:27)(EVENT=34)(ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcp)(HOST=oracle-server)(PORT=1630)(QUEUESIZE=32)))
(TIMESTAMP=22-JUN-2010 16:35:31)(EVENT=102)(RLYNO=0)(ADDRESS=(PROTOCOL=tcp)(HOST=xx.xx.46.145)(PORT=11473))
(TIMESTAMP=22-JUN-2010 16:35:31)(EVENT=20)(RLYNO=0)(REASON=16)(ADDRESS=(PROTOCOL=tcp)(HOST=xx.xx.46.145)(PORT=11473))
listener ora:
# LISTENER.ORA Network Configuration File: C:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle-server)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle-server)(PORT = 2481))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ifs)
(ORACLE_HOME = C:\oracle\ora81)
(SID_NAME = ifs)
names ora:
ifs=
(DESCRIPTION=
(SOURCE_ROUTE=yes)
(ADDRESS=
(PROTOCOL=tcp)
(HOST=oracle-server)
(PORT=1630))
(ADDRESS=
(PROTOCOL=tcp)
(HOST=oracle-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=ifs)))
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle-server)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = ifs)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(Key = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
We're very close to go with ms sql istead. help would be greatly apreciatet.
Morten
Denmark
tracing connection manager:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is C:\oracle\ora81\network\trace\cman_3280.trc
New trace level is 16
--- TRACE CONFIGURATION INFORMATION ENDS ---
nfpglsn: entry
nslisten: entry
nsc2addr: entry
nttbnd2addr: entry
nttbnd2addr: port resolved to 1630
nttbnd2addr: looking up IP addr for host: oracle-server
nttbnd2addr: exit
nsc2addr: normal exit
nsopen: entry
nsmal: entry
nsmal: 420 bytes at 0xf19a68
nsmal: normal exit
nsopenmplx: entry
nsmal: entry
nsmal: 1712 bytes at 0xf19c18
nsmal: normal exit
nsopenmplx: normal exit
nsopen: opening transport...
nttcon: entry
nttcon: toc = 2
nttcnp: entry
ntvlin: entry
ntvllt: entry
ntvllt: No PROTOCOL.ORA file is found
ntvllt: exit
ntvlin: exit
nttcnp: Validnode Table IN use; err 0x0
nttcnp: creating a socket.
nttcnp: binding an address to a socket.
nttcnp: listening on a bound socket (queue size = 32).
nttcnp: getting sockname
nttcnp: exit
nttcon: exit
nsopen: transport is open
nsoptions: entry
nsoptions: lcl[0]=0x0, lcl[1]=0x2150, gbl[0]=0x0, gbl[1]=0x2001, cha=0x0
nsoptions: lcl[0]=0x1fefff, lcl[1]=0x2150, gbl[0]=0x783f, gbl[1]=0x2001
nsoptions: normal exit
nsopen: global context check-in (to slot 0) complete
nsopen: lcl[0]=0x1fefff, lcl[1]=0x2150, gbl[0]=0x783f, gbl[1]=0x2001, tdu=32767, sdu=8192
nsopen: Caller is Interchange; telling adapter
nttctl: entry
nsdo: entry
nsdo: cid=0, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=7, flg=0x4202, mvd=0
nsbal: entry
nsbgetfl: entry
nsbgetfl: normal exit
nsmal: entry
nsmal: 44 bytes at 0x3ce9a0
nsmal: normal exit
nsbal: normal exit
nsdo: nsctxrnk=0
nsdo: normal exit
nsopen: normal exit
nslisten: normal exit
nsevreg: entry
nsevreg: begin registration process for 0
nsevregPrePost: entry
nsevregPrePost: normal exit
nsevreg: sgt=0, evn=1, evt[2]=0x0
nsevreg: begin notification process for 0
nsevregAffectNotif: entry
nsevregAffectNotif: exit (0)
nsevreg: rdm=0, sgt=0, evt[0]=0x1, [1]=0x1, [2]=0x0, nrg=0
nsevreg: registering for 0x1
nsevreg: normal exit
nfpglsn: exit
nscall: entry
nsmal: entry
nsmal: 140 bytes at 0xf19650
nsmal: normal exit
nscall: connecting...
nsc2addr: entry
nttbnd2addr: entry
nttbnd2addr: port resolved to 1830
nttbnd2addr: looking up IP addr for host: oracle-server
nttbnd2addr: exit
nsc2addr: normal exit
nsopen: entry
nsmal: entry
nsmal: 420 bytes at 0xf1d3b8
nsmal: normal exit
nsopenmplx: entry
nsmal: entry
nsmal: 1712 bytes at 0xf1d568
nsmal: normal exit
nsopenmplx: normal exit
nsopen: opening transport...
nttcon: entry
nttcon: toc = 1
nttcnp: entry
ntvlin: entry
ntvlin: exit
nttcnp: Validnode Table IN use; err 0x0
nttcnp: creating a socket.
nttcnp: exit
nttcni: entry
nttcni: trying to connect to socket 220.
nttcni: exit
nttcon: NT layer TCP/IP connection has been established.
nttcon: set TCP_NODELAY on 220
nttcon: exit
nsopen: transport is open
nsnainit: entry
nsnainit: call
nsnainit: NA not wanted - disabling and returning
nsoptions: entry
nsoptions: lcl[0]=0x0, lcl[1]=0x10, gbl[0]=0x0, gbl[1]=0x0, cha=0x0
nsoptions: lcl[0]=0x1fefff, lcl[1]=0x10, gbl[0]=0xf83f, gbl[1]=0x0
nsoptions: normal exit
nsopen: global context check-in (to slot 1) complete
nsopen: lcl[0]=0x1fefff, lcl[1]=0x10, gbl[0]=0xf83f, gbl[1]=0x0, tdu=32767, sdu=2048
nsdo: entry
nsdo: cid=1, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=7, flg=0x4201, mvd=0
nsbal: entry
nsbgetfl: entry
nsbgetfl: normal exit
nsmal: entry
nsmal: 44 bytes at 0xf191c8
nsmal: normal exit
nsbal: normal exit
nsbal: entry
nsbgetfl: entry
nsbgetfl: normal exit
nsmal: entry
nsmal: 44 bytes at 0xf19200
nsmal: normal exit
nsbal: normal exit
nsepcIniCFI: entry
nlidg8: entry
nlidg8: exit
nsepcIniCFI: normal exit
nsdo: nsctxrnk=0
nsdo: normal exit
nsopen: normal exit
nsdo: entry
nsdo: cid=1, opcode=67, bl=0, what=8, uflgs=0x0, cflgs=0x3
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=14, flg=0x4205, mvd=0
nsdo: gtn=0, gtc=0, ptn=10, ptc=2019
nscon: entry
nscon: doing connect handshake...
nscon: sending NSPTCN packet
nspsend: entry
nspsend: plen=58, type=1
nttwr: entry
nttwr: socket 220 had bytes written=58
nttwr: exit
nspsend: 58 bytes to transport
nspsend: packet dump
nspsend: 00 3A 00 00 01 00 00 00 |.:......|
nspsend: 01 36 01 2C 00 00 08 00 |.6.,....|
nspsend: 7F FF A3 0A 00 00 01 00 |........|
nspsend: 00 00 00 3A 00 00 00 00 |...:....|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 0E A0 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: 00 00 00 00 00 00 00 00 |........|
nspsend: normal exit
nscon: exit (0)
nsdo: nsctxrnk=0
nsdo: normal exit
nsdo: entry
nsdo: cid=1, opcode=68, bl=256, what=9, uflgs=0x2000, cflgs=0x3
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=2, flg=0x4205, mvd=0
nsdo: gtn=0, gtc=0, ptn=10, ptc=2019
nscon: entry
nscon: recving a packet
nsprecv: entry
nsbal: entry
nsbgetfl: entry
nsbgetfl: normal exit
nsmal: entry
nsmal: 44 bytes at 0xf19238
nsmal: normal exit
nsbal: normal exit
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 220 had bytes read=32
nttrd: exit
nsprecv: 32 bytes from transport
nsprecv: tlen=32, plen=32, type=2
nsprecv: packet dump
nsprecv: 00 20 00 00 02 00 00 00 |. ......|
nsprecv: 01 36 00 00 08 00 7F FF |.6......|
nsprecv: 01 00 00 00 00 20 00 00 |..... ..|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: normal exit
nscon: got NSPTAC packet
nsconneg: entry
nsconneg: vsn=310, gbl=0x0, sdu=2048, tdu=32767
nsconneg: normal exit
nscon: no connect data
nscon: doing connect handshake...
nscon: nsctxinf[0]=0x0, [1]=0x0
nscon: normal exit
nsdo: nsctxrnk=0
nsdo: normal exit
nsnaconn: entry
nsnainconn: entry
nsnainconn: inf->nsinfflg[0]: 0x0 inf->nsinfflg[1]: 0x0
nsnainconn: "or" info flags: 0x0
nsnainconn: "and" info flags: 0x0
nsnainconn: no native services in use - returning
nsnainconn: signalling that calling function should not continue
nsnainconn: normal exit
nsnaconn: normal exit
nscall: normal exit
nsdo: entry
nsdo: cid=1, opcode=67, bl=116, what=1, uflgs=0x2, cflgs=0x3
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=8, flg=0x420d, mvd=0
nsdo: gtn=32, gtc=32, ptn=10, ptc=2019
nsdo: 116 bytes to NS buffer
nsdoacts: entry
nsdofls: entry
nsdofls: DATA flags: 0x0
nsdofls: sending NSPTDA packet
nspsend: entry
nspsend: plen=126, type=6
nttwr: entry
nttwr: socket 220 had bytes written=126
nttwr: exit
nspsend: 126 bytes to transport
nspsend: packet dump
nspsend: 00 7E 00 00 06 00 00 00 |.~......|
nspsend: 00 00 30 31 31 32 28 43 |..0112(C|
nspsend: 4D 41 4E 5F 52 45 43 4F |MAN_RECO|
nspsend: 52 44 3D 28 43 4F 4D 4D |RD=(COMM|
nspsend: 41 4E 44 3D 31 30 31 29 |AND=101)|
nspsend: 28 41 44 44 52 45 53 53 |(ADDRESS|
nspsend: 5F 4C 49 53 54 3D 20 28 |_LIST= (|
nspsend: 41 44 44 52 45 53 53 3D |ADDRESS=|
nspsend: 28 50 52 4F 54 4F 43 4F |(PROTOCO|
nspsend: 4C 3D 74 63 70 29 28 48 |L=tcp)(H|
nspsend: 4F 53 54 3D 6F 72 61 63 |OST=orac|
nspsend: 6C 65 2D 73 65 72 76 65 |le-serve|
nspsend: 72 29 28 50 4F 52 54 3D |r)(PORT=|
nspsend: 31 36 33 30 29 28 51 55 |1630)(QU|
nspsend: 45 55 45 53 49 5A 45 3D |EUESIZE=|
nspsend: 33 32 29 29 29 29 00 00 |32))))..|
nspsend: normal exit
nsdofls: exit (0)
nsdoacts: flushing transport
nttctl: entry
nsdoacts: normal exit
nsdo: nsctxrnk=0
nsdo: normal exit
nsdisc: entry
nsclose: entry
nstimarmed: entry
nstimarmed: no timer allocated
nstimarmed: normal exit
nsdo: entry
nsdo: cid=1, opcode=98, bl=0, what=0, uflgs=0x40, cflgs=0x2
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=8, flg=0x4209, mvd=0
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsdo: nsctxrnk=0
nsdo: normal exit
nsclose: closing transport
nttdisc: entry
nttdisc: Closed socket 220
nttdisc: exit
nsclose: global context check-out (from slot 1) complete
nsnadisc: entry
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsmfr: entry
nsmfr: 1712 bytes at 0xf1d568
nsmfr: normal exit
nsmfr: entry
nsmfr: 140 bytes at 0xf19650
nsmfr: normal exit
nsmfr: entry
nsmfr: 420 bytes at 0xf1d3b8
nsmfr: normal exit
nsclose: normal exit
nsdisc: exit (0)
nfpgsev: entry
nfpgsev: waiting for an event
nsevwait: entry
nsevwait: 1 registered connection(s)
nsevwait: 0 added to NT list for 0x8
nsevwait: 0 pre-posted event(s)
nsevwait: waiting for transport event (0 thru 0)...
ntctst: size of NTTEST list is 1 - not calling poll
sntseltst: Testing for CONNECTIONS on socket 192
sntseltst: FOUND: connection request on socket 192
nsevwait: 1 newly-posted event(s)
nsevfnt: cxd: 0xf19348 stage 0: NT events set:
CONNECTION REQUEST
nsevfnt: cxd: 0xf19348 stage 0: NS events set:
INCOMING CALL
nsevwait: event is 0x1, on 0
nsevwait: 1 posted event(s)
nsevwait: exit (0)
nfpgsev: # event connections = 1
nfpgevh: entry
nfpgevh: event on cxd 0xf19348 (or cid 0)
nfpgevh: event flags = 0x1
nsanswer: entry
nsopen: entry
nsmal: entry
nsmal: 420 bytes at 0xf1d3b8
nsmal: normal exit
nsopenmplx: entry
nsmal: entry
nsmal: 1712 bytes at 0xf2fa08
nsmal: normal exit
nsopenmplx: normal exit
nsopen: opening transport...
nttcon: entry
nttcon: toc = 3
nttcnp: entry
ntvlin: entry
ntvlin: exit
nttcnp: Validnode Table IN use; err 0x0
nttcnp: getting sockname
nttcnp: exit
nttcnr: entry
nttcnr: waiting to accept a connection.
nttcnr: getting sockname
nttvlser: entry
nttvlser: valid node check on incoming node 85.81.46.145
nttvlser: Accepted Entry: 85.81.46.145
nttcnr: exit
nttcon: NT layer TCP/IP connection has been established.
nttcon: set TCP_NODELAY on 220
nttcon: exit
nsopen: transport is open
nsnainit: entry
nsnainit: normal exit
nsopen: global context check-in (to slot 1) complete
nsopen: lcl[0]=0x1fefff, lcl[1]=0x2153, gbl[0]=0x783f, gbl[1]=0x2001, tdu=32767, sdu=8192
nsopen: Caller is Interchange; telling adapter
nttctl: entry
nsdo: entry
nsdo: cid=1, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=7, flg=0x4200, mvd=0
nsbal: entry
nsbgetfl: entry
nsbgetfl: normal exit
nsmal: entry
nsmal: 44 bytes at 0xf30e48
nsmal: normal exit
nsbal: normal exit
nsbal: entry
nsbgetfl: entry
nsbgetfl: normal exit
nsmal: entry
nsmal: 44 bytes at 0xf1de68
nsmal: normal exit
nsbal: normal exit
nsdo: nsctxrnk=0
nsdo: normal exit
nsopen: normal exit
nsanswer: deferring connect attempt; at stage 5
nsanswer: normal exit
nfpgevh: client side cid = 0x1
nsevreg: entry
nsevreg: begin registration process for 1
nsevregPrePost: entry
nsevregPrePost: normal exit
nsevreg: sgt=0, evn=1, evt[2]=0x0
nsevreg: begin notification process for 1
nsevregAffectNotif: entry
nsevregAffectNotif: exit (0)
nsevreg: rdm=0, sgt=0, evt[0]=0x20, [1]=0x20, [2]=0x0, nrg=0
nsevreg: registering for 0x20
nsevreg: normal exit
nfpgevh: event 0x20 registered for cid 1
nfpgevh: exit
nfpgsev: waiting for an event
nsevwait: entry
nsevwait: 2 registered connection(s)
nsevwait: 0 added to NT list for 0x8
nsevwait: 1 added to NT list for 0x2
nsevwait: 0 pre-posted event(s)
nsevwait: waiting for transport event (0 thru 1)...
ntctst: size of NTTEST list is 1 - not calling poll
sntseltst: Testing for CONNECTIONS on socket 192
sntseltst: Testing for DATA on socket 220
sntseltst: FOUND: read request on socket 220
nsevwait: 1 newly-posted event(s)
nsevfnt: cxd: 0x12a007c stage 5: NT events set:
READ
nsevfnt: cxd: 0x12a007c stage 5: NS events set:
OUTGOING CALL COMPLETE
nsprecv: entry
nsbal: entry
nsbgetfl: entry
nsbgetfl: normal exit
nsmal: entry
nsmal: 44 bytes at 0xf1dea0
nsmal: normal exit
nsbal: normal exit
nsprecv: reading from transport...
nttrd: entry
nttrd: socket 220 had bytes read=270
nttrd: exit
nsprecv: 270 bytes from transport
nsprecv: tlen=270, plen=270, type=1
nsprecv: normal exit
nsevfnt: cxd: 0x12a007c stage 5: NT events set:
READ
nsevfnt: cxd: 0x12a007c stage 5: NS events set:
OUTGOING CALL COMPLETE
nsevdansw: entry
nsevdansw: at STAGE 5
nsdo: entry
nsdo: cid=1, opcode=68, bl=1024, what=8, uflgs=0x0, cflgs=0x3
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=14, flg=0x4204, mvd=0
nsdo: gtn=0, gtc=0, ptn=10, ptc=8163
nscon: entry
nscon: doing connect handshake...
nscon: recving a packet
nsprecv: entry
nsprecv: 270 bytes from leftover
nsprecv: tlen=270, plen=270, type=1
nsprecv: packet dump
nsprecv: 01 0E 00 00 01 00 00 00 |........|
nsprecv: 01 39 01 2C 00 00 08 00 |.9.,....|
nsprecv: 7F FF C6 0E 00 00 01 00 |........|
nsprecv: 00 D4 00 3A 00 00 02 00 |...:....|
nsprecv: 61 61 00 00 00 00 00 00 |aa......|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 00 00 00 00 00 00 |........|
nsprecv: 00 00 28 44 45 53 43 52 |..(DESCR|
nsprecv: 49 50 54 49 4F 4E 3D 28 |IPTION=(|
nsprecv: 43 4F 4E 4E 45 43 54 5F |CONNECT_|
nsprecv: 44 41 54 41 3D 28 53 45 |DATA=(SE|
nsprecv: 52 56 49 43 45 5F 4E 41 |RVICE_NA|
nsprecv: 4D 45 3D 69 66 73 29 28 |ME=ifs)(|
nsprecv: 43 49 44 3D 28 50 52 4F |CID=(PRO|
nsprecv: 47 52 41 4D 3D 43 3A 5C |GRAM=C:\|
nsprecv: 50 72 6F 67 72 61 6D 20 |Program |
nsprecv: 46 69 6C 65 73 5C 4D 69 |Files\Mi|
nsprecv: 63 72 6F 73 6F 66 74 20 |crosoft |
nsprecv: 56 69 73 75 61 6C 20 53 |Visual S|
nsprecv: 74 75 64 69 6F 20 31 30 |tudio 10|
nsprecv: 2E 30 5C 43 6F 6D 6D 6F |.0\Commo|
nsprecv: 6E 37 5C 49 44 45 5C 64 |n7\IDE\d|
nsprecv: 65 76 65 6E 76 2E 65 78 |evenv.ex|
nsprecv: 65 29 28 48 4F 53 54 3D |e)(HOST=|
nsprecv: 4D 4F 52 54 45 4E 53 29 |MORTENS)|
nsprecv: 28 55 53 45 52 3D 6D 6F |(USER=mo|
nsprecv: 72 74 65 6E 29 29 29 28 |rten)))(|
nsprecv: 41 44 44 52 45 53 53 3D |ADDRESS=|
nsprecv: 28 50 52 4F 54 4F 43 4F |(PROTOCO|
nsprecv: 4C 3D 54 43 50 29 28 48 |L=TCP)(H|
nsprecv: 4F 53 54 3D 38 35 2E 38 |OST=85.8|
nsprecv: 31 2E 34 36 2E 31 34 35 |1.46.145|
nsprecv: 29 28 50 4F 52 54 3D 31 |)(PORT=1|
nsprecv: 36 33 30 29 29 29 00 00 |630)))..|
nsprecv: normal exit
nscon: got NSPTCN packet
nsconneg: entry
nsconneg: vsn=313, lov=300, opt=0x0, sdu=2048, tdu=32767, ntc=0xc60e
nsconneg: vsn=310, gbl=0x1, sdu=2048, tdu=32767
nsconneg: normal exit
nscon: got 212 bytes connect data
nscon: exit (0)
nsdo: nsctxrnk=0
nsdo: normal exit
nsevdansw: exit
nttctl: entry
nttctl: Clearing non-blocking mode
nsevwait: event is 0x20, on 1
nsevwait: 1 posted event(s)
nsevwait: exit (0)
nfpgsev: # event connections = 1
nfpgevh: entry
nfpgevh: event on cxd 0x12a007c (or cid 1)
nfpgevh: event flags = 0x20
nfpgevh: async nsanswer is complete
nttaddr2bnd: entry
nttaddr2bnd: exit
nsrefuse: entry
nsdo: entry
nsdo: cid=1, opcode=67, bl=0, what=10, uflgs=0x0, cflgs=0x3
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=2, flg=0x4204, mvd=0
nsdo: gtn=270, gtc=270, ptn=10, ptc=8163
nscon: entry
nscon: sending NSPTRF packet
nspsend: entry
nspsend: plen=12, type=4
nttwr: entry
nttwr: socket 220 had bytes written=12
nttwr: exit
nspsend: 12 bytes to transport
nspsend: packet dump
nspsend: 00 0C 00 00 04 00 00 00 |........|
nspsend: 22 00 00 00 00 00 00 00 |".......|
nspsend: normal exit
nscon: exit (0)
nsdo: nsctxrnk=0
nsdo: normal exit
nsclose: entry
nstimarmed: entry
nstimarmed: no timer allocated
nstimarmed: normal exit
nsdo: entry
nsdo: cid=1, opcode=66, *bl=0, *what=0, uflgs=0x0, cflgs=0x2
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=2, flg=0x4200, mvd=0
nsevunreg: entry
nsevunreg: cid=1, sgt=0, rdm=0
nsrah: entry
nsevunreg: 1 registered connection(s)
nsevunreg: normal exit
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsdo: nsctxrnk=0
nsdo: normal exit
nsclose: closing transport
nttdisc: entry
nttdisc: Closed socket 220
nttdisc: exit
nsclose: global context check-out (from slot 1) complete
nsnadisc: entry
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsmfr: entry
nsmfr: 1712 bytes at 0xf2fa08
nsmfr: normal exit
nsmfr: entry
nsmfr: 420 bytes at 0xf1d3b8
nsmfr: normal exit
nsclose: normal exit
nsrefuse: exit (0)
nfpgevh: exit
nfpgsev: waiting for an event
nsevwait: entry
nsevwait: 1 registered connection(s)
nsevwait: 0 added to NT list for 0x8
nsevwait: 0 pre-posted event(s)
nsevwait: waiting for transport event (0 thru 0)...
ntctst: size of NTTEST list is 1 - not calling poll
sntseltst: Testing for CONNECTIONS on socket 192
Similar Messages
-
Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Thursday 4:20am EST, 02-19-2015
Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
I haven't changed anything and this just started failing this morning.
I've saw same issue on my Blackberry PlayBook 64GB.
Is anyone else recently experiencing AOL IMAP Errors?
Solved!
Go to Solution.Yes! Same thing happened suddenly to my Z10 this morning. No AOL.
-
How can I debug a problem with the 3g data connection on my iPhone 4s?
This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck! -
I'm having problems with my mobile internet connection
I'm having problems with my mobile internet connection. Wifi works fine. It seems like my connection get lost every tuesday and friday between 11 and 12 am local time (guess it would be between 2 and 3 am Los angeles time for example). The connection won't comeback by itself. I have to turn the phone, iPhone 4s iOS 5.0.1, off and back on again. The connection immediatly works fine after the restart and stays fine for days. I really don't know what to do. My provider doesn't seem to know either. Tried a lot of things, new settings, resets, I even got a new iPhone. Still the same problem however. Richt now I changes the time setting to see it the problem occurs at another time. Btw: the phone doesn't say "no service" and I can send sms messages and make phonecalls. The 3G symbol or the circular symbol is shown next to the name of the provider.
Does somebody has an idea what this might be? Thanks a lot.Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch -
I had a problem with my WRT54GS not connecting to my inte...
I had a problem with my WRT54GS not connecting to my internet until I cloned my old routers mac address. I was using a BEFW11S4 which was bullet proof and worked for several years until I changed to Wireless G. Upon purchasing the WRT54GS and setting up all parameters exactly like I had before I could not make any connections, wireless or otherwise until I cloned my mac address to the same address as my previous router. Apparently my ISP had that mac address registered and would not properly perform DHCP even though all other paremeters were correct. I read lots of messages here on line with issues with the WRT54GS connecting and this fixed my problem outright. If you upgrade from a previous generation router (Linksys or otherwise apparently) copy your old routers mac address and clone it to your new router and you should be able to connect. This fixed my problem after several hours and days of troubleshooting. Good Luck Karnage
As an alternative to using MAC address cloning, you can phone your ISP, tell them you have a new router, and tell them to reset their system to accept the MAC address of your new router. This way, you won't have to remember the old MAC address, in the event that you need to reset your router to factory defaults.
-
Problem with not getting Internet Connect on AirPort Express
Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.
Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None. -
Problems with Sybase Database for Collection Manager in SCE2020
We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
[root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00 149559596 138280700 3681636 98% / /dev/sda1 101086 20685 75182 22% /boot none 1036624 0 1036624 0% /dev/shm
We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
Here is the info:
Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
[root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
[root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
Name % Data Free % Log Free
Database 55 99
[root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
/home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
/home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
[root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
Test: 01db_up.sh. Status: FAIL. Message: DB is not running
Test: 02cm_up.sh. Status: PASS. Message: CM is running
Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
Message was edited by: EMILIO MENCIATomo:
we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
This is the log of the CM. What can be the problem? Thanks tomo
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts during current sample period: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts since startup: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections during current sample period: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections since startup: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections during current sample period: 15.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections since startup: 18.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used during current sample period: 1.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used since startup: 3.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server Error: 1608, Severity: 18, State: 4
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server Error: 1608, Severity: 18, State: 4
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Error: 632, Severity: 20, State: 2
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Attempt to move memory with an incorrect length
of -794444483. Maximum allowed length is 16384.
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel SQL causing error : =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curdb = 4 tempdb = 2 pstat = 0x10000
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel lasterror = 632 preverror = 0 transtate = 3
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curcmd = 0 program =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel end of stack trace, spid 11, kpid 1755578479, suid 3
AFTER RESTART
ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Adaptive Server Enterprise (Small Business Edition)
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel Using config area from primary master device.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel Locking shared memory into physical memory.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel Internal run-time model set for Linux - Native
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using 1024 file descriptors.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Copyright 1987, 2007
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. All rights reserved.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Unpublished rights reserved under U.S. copyright laws.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel
Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel This software contains confidential and trade secret information of Sybase,
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Inc. Use, duplication or disclosure of the software and documentation by
Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel the U.S. Government is subject to restrictions set forth in a license
Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement between the Government and Sybase, Inc. or other written
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement specifying the Government's rights to use the software and any
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel applicable FAR provisions, for example, FAR 52.227-19.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Platform TCP network is forced to IPv4-only.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel ASE booted with TCP_NODELAY enabled.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel SSL Plus v5.0.4 security modules loaded successfully.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel Network and device connection limit is 1009.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Number of blocks left for proc headers: 12760.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Proc header memory allocated 2552 pages for each per engine cache
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Size of the 16K memory pool: 307200 Kb
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Memory allocated for the default data cache cachelet 1: 307200 Kb
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Virtual device 0 started using asynchronous i/o.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server Loaded default Unilib conversion handle.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel Worker Thread Manager is not enabled for use in ASE.
Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Unix interval timer enabled for sysclk interrupts.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel Begin processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Completed processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Encryption provider initialization succeeded on engine 0.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel engine 0, os pid 27618 online
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server No active traceflags
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel libomni1 - Component Integration Services: usin
g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server Opening Master Database ...
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server Loading ASE's default sort order and character set
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server Recovering database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server Started estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started REDO pass for database 'master'. The total number of log records to process is 13.
Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Completed REDO pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Recovery of database 'master' will undo incomplete nested top actions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Started recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server Completed recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server Started filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server Completed filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Started cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Completed cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server Checking external objects.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server Database 'master' is now online.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server The transaction log in the database 'master' will use I/O size of 16 Kb.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server Warning: ASE_HA has no valid license and therefore is not initialized.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server server name is 'pqbsyb1'
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server Activating disk 'sysprocsdev' of size 126976 KB.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Virtual device 1 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server Activating disk 'systemdbdev' of size 49152 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Virtual device 2 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server Activating disk 'apricot_data1' of size 35082660 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server Activating disk 'apricot_log1' of size 2980002 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server Activating disk 'tempdb_dev' of size 1048576 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Virtual device 5 started using asynchronous i/o.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server Recovering database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server Started estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Completed REDO pass for database 'sybsystemdb'.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Started recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server Completed recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server Started filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server Completed filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Started cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Completed cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Boot Count: 13
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server Checking external objects.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server Completed recovery checkpoint for database 'model'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server Started filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server Completed filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Started cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Completed cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server Checking external objects.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server The transaction log in the database 'model' will use I/O size of 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Database 'model' is now online.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server The logical pagesize of the server is 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server 0 dump conditions detected at boot time
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Clearing temp db
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server Database 'tempdb' is now online.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server Recovering database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server Started estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed REDO pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server Completed recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server Started filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server Completed filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Started cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Completed cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server Checking external objects.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server Database 'sybsystemprocs' is now online.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server The server will recover databases serially.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server Recovering database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server Started estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started REDO pass for database 'apricot'. The total number of log records to process is 846.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Redo pass of recovery has processed 2 committed and 138 aborted transactions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Completed REDO pass for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Recovery of database 'apricot' will undo incomplete nested top actions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Started recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server Completed recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server Started filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server Completed filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Started cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Completed cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server Checking external objects.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server The transaction log in the database 'apricot' will use I/O size of 16 Kb.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server Database 'apricot' is now online.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server Recovery complete.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default unicode sort order is 'binary'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default sort order is:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'bin_iso_1' (ID = 50)
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server on top of default character set:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'iso_1' (ID = 1).
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel Cannot send, host process disconnected: btl-sce-cm suid: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server Error: 1608, Severity: 18, State: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0) -
Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate
Has anyone had this problem with IPad 3 after upgrade to IOS 7,
trying to to connect VPN , but I get this messag, "could not validate the server certificate".
I am trying to connect to Oracle VPN.Has anyone found a solution for this yet? I am still getting the could not validate server certificate error. I have tried importing the entire certificate chain as well as importing each individual cert in the chain. My certificate works perfectly with the cisco vpn on my pc.
This is my first experience owning an apple product, and I am very disappointed with the customer support that I have received. I tried calling the help line and no one would even attempt to answer my question. I was then told that the Mac "geniuses" wouldn't know either and that I may be able to find an answer on the message boards. So I am reaching out to the community...Has anyone been able to figure out how to resolve this issue or even the specific cause? Any help is appreciated. -
Face time not working. When dialled it says connecting and drops immediately. When my friends calling it show connecting but it does not.
Is there a problem with face time. I am in south Africa, it was working perfectly up to Easter. Please help this is my life line.There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself. -
I've had my IPad 3 for awhile and had no problems with it. The other day I went to connect to my wi-fi and it told me could not connect to network. It recognizes my wi-fi but won't connect. I have shut off my wi-fi and still the same problem. Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network. What is wrong
Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.
-
Problems with printer and network connectivity
So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!http://support.apple.com/kb/DL907
-
Problem with mac mini 2012 connection
Hello!I have a problem with my mac mini 2012 connection!The hdmi to hdmi connection working great at my mac mini!The thunderbolt(mac mini) to hdmi (display) is not working!But when i have the hdmi to hdmi cable and the thunderbolt to hdmi at the same time (my display have two hdmi output) works fine!!But when i unplug the hdmi to hdmi cable stop working the thunderbolt to hdmi!!Any solution for that??I want only the thunderbolt to hdmi connection!!
Whew, never heard of this problem yet!?
Is it possible the TB->HDMI is set to mirror the HDMI->HDMI screen? -
[SOLVED] Problem with adding a SSH connection to startup
Hi guys. I have a problem with adding ssh connection to startup. i want this command to run before kde login screen and keep running all time.
ssh -D 9292 remoteuser@remotehost
but it doesnt connect. Thanks for help!
Last edited by alperenel (2011-03-11 00:10:27)cactus wrote:
ssh -fN -D 9292 remoteuser@remotehost
you need -f, which sends ssh to the background, and -N which does not execute a remote command.
If you need it to run as a user other than root, then you probably need to utilize su as well.
it didnt work either. i am putting it in rc.local but doesnt work. -
Problems with Zone based Firewall and mtr (mytraceroute)
We are using ZFW on an ASR1001 and have experienced a problem: when I try to use mtr (mytraceroute, see
http://en.wikipedia.org/wiki/MTR_%28software%29), I am getting packetloss on all hops between the source and the destination. e.g.:
<code>
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 100.0 8 0.0 0.0 0.0 0.0 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
7. de-cix20.net.google.com 100.0 7 0.0 0.0 0.0 0.0 0.0
8. 72.14.238.230 100.0 7 0.0 0.0 0.0 0.0 0.0
9. 72.14.239.62 100.0 7 0.0 0.0 0.0 0.0 0.0
10. 209.85.242.187 100.0 7 0.0 0.0 0.0 0.0 0.0
11. ???
12. ???
13. ???
14. bk-in-f94.1e100.net 0.0% 7 20.0 20.6 20.0 21.2 0.4
</code>
So it seems that the Firewall on my asr1001 is throwing away all packets with ttl-exceeded coming back from hops in between, they have another destination address.
At the moment I am inspecting all kind of traffic from my network outgoing:
ip access-list extended 101
permit ip any any
class-map type inspect match-all cmap1
match access-group name 101
policy-map type inspect pmap1
class type inspect cmap1
inspect
etc... (zones, zone-pair in-out with policies applied)
So I tried to let pass all icmp-traffic from the outside to my network:
class-map type inspect match-all cmap_icmp
match protocol icmp
policy-map type inspect pmap2
class type inspect cmap_icmp
pass
etc... (zones, zone-pair out-in with policies applied)
So this has no effect, but I tested and I could figure out, that when I pass all icmp-traffic from my network to the outside, THEN mtr does work.
BUT then normal ping does not work anymore, because it will not be inspected any more.
But I want to have a secure Firewall with inspecting echo-replys and working mtr anyway.
Has anyone the same problem or can even solve this issue?
Thanks in advance,
StefanHi Andrew, thanks for Your answer...
So I have now:
class-map type inspect match-any cmap_icmp
match access-group name icmp_types
ip access-list extended icmp_types
permit icmp any any ttl-exceeded
PMAP IN--> OUT
(don't be confused, my "vlanxxx_pmap_in" is the pmap FROM my network TO the outside...)
policy-map type inspect vlan664_pmap_in
class type inspect vlan664_cmap_in (this is an extended ACL "permit ip x.x.x.x any")
inspect
class type inspect ipsec_cmap_in (this is because I have problems with VPN when inspected, another problem...)
pass log
class class-default
drop log
PMAP OUT-->IN
policy-map type inspect vlan664_pmap_out
class type inspect cmap_icmp (here comes the "ttl-exceeded"-ACL)
pass log
class type inspect vlan664_cmap_out (some open ports for some clients)
inspect
class type inspect ipsec_cmap_out (same problem with VPN when inspected)
pass log
class class-default
drop log
But unfortunately, the same problem occurs. Curiously, the first two packets seem to go "through" the firewall, but with 3rd packet the packetloss comes up:
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 50.0% 3 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 50.0% 3 0.9 0.9 0.9 0.9 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 0.0% 2 2.7 2.7 2.7 2.7 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 0.0% 2 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 0.0% 2 2.5 2.5 2.5 2.5 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 0.0% 2 4.1 4.1 4.1 4.1 0.0
7. de-cix20.net.google.com 0.0% 2 5.0 5.0 5.0 5.0 0.0
8. 72.14.238.44 0.0% 2 39.2 39.2 39.2 39.2 0.0
9. 72.14.236.68 0.0% 2 5.4 5.4 5.4 5.4 0.0
10. 209.85.254.118 0.0% 2 5.4 5.4 5.4 5.4 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 2 5.5 5.3 5.2 5.5 0.2
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 66.7% 4 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 66.7% 4 0.8 0.8 0.8 0.8 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 66.7% 4 2.1 2.1 2.1 2.1 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 66.7% 4 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 66.7% 4 2.6 2.6 2.6 2.6 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 66.7% 4 4.2 4.2 4.2 4.2 0.0
7. de-cix20.net.google.com 66.7% 4 5.3 5.3 5.3 5.3 0.0
8. 72.14.238.44 66.7% 4 70.3 70.3 70.3 70.3 0.0
9. 72.14.239.60 66.7% 4 5.8 5.8 5.8 5.8 0.0
10. 209.85.254.116 66.7% 4 5.8 5.8 5.8 5.8 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 4 6.3 5.7 5.2 6.3 0.5
In the sessions on the routers, I see only this entry:
Session 206F66C (129.143.6.89:8)=>(8.8.8.8:0) icmp SIS_OPEN
Any other suggestions? -
Oracle Text - Problem with filtering binary documents (.doc, .pdf, etc...)
Hi, I have a problem with filtering binary documents (.doc, .pdf, etc...). I use SQL*PLUS for remote access to Oracle 10.2 on Linux and I create table:
CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
I insert to this table:
INSERT into test values(1, 'PATH/text1.doc‘);
INSERT into test values(2,'PATH/text2.doc‘);
and then:
CREATE INDEX test_index ON test(text) indextype is ctxsys.context
parameters (’datastore ctxsys.file_datastore
filter ctxsys.auto_filter’);
Message "Index created" is displayed, but objects: DR$test_index$I, DR$test_index$K, DR$test_index$N, DR$test_index$R and DR$test_index$P are empty => index wasn´t created probably.
I don´t know, where is bug, either bug is somewhere in this code or on the server (wrong installation oracle or constraint privileges). Do you know in what is bug?The following is an excerpt from the 10g online documentation. Note the items that I have put in bold.
"FILE_DATASTORE
The FILE_DATASTORE type is used for text stored in files accessed through the local file system.
Note:
FILE_DATASTORE may not work with certain types of remote mounted file systems.
FILE_DATASTORE has the following attribute(s):
Table 2-4 FILE_DATASTORE Attributes
Attribute Attribute Value
path path1:path2:pathn
path
Specify the full directory path name of the files stored externally in a file system. When you specify the full directory path as such, you need only include file names in your text column.
You can specify multiple paths for path, with each path separated by a colon (:) on UNIX and semicolon(;) on Windows. File names are stored in the text column in the text table.
If you do not specify a path for external files with this attribute, Oracle Text requires that the path be included in the file names stored in the text column.
PATH Attribute Limitations
The PATH attribute has the following limitations:
If you specify a PATH attribute, you can only use a simple filename in the indexed column. You cannot combine the PATH attribute with a path as part of the filename. If the files exist in multiple folders or directories, you must leave the PATH attribute unset, and include the full file name, with PATH, in the indexed column.
On Windows systems, the files must be located on a local drive. They cannot be on a remote drive, whether the remote drive is mapped to a local drive letter."
With accessible paths and files, you get something like:
SCOTT@orcl_11g> CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
Table created.
SCOTT@orcl_11g>
SCOTT@orcl_11g>
SCOTT@orcl_11g> INSERT into test values(1,'c:\oracle11g\banana.pdf');
1 row created.
SCOTT@orcl_11g> INSERT into test values(2,'c:\oracle11g\cranberry.pdf');
1 row created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> CREATE INDEX test_index ON test(text) indextype is ctxsys.context
2 parameters ('datastore ctxsys.file_datastore
3 filter ctxsys.auto_filter');
Index created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> select count(*) from dr$test_index$i
2 /
COUNT(*)
608
SCOTT@orcl_11g> In the following, I used a non-existent path and non-existent file name, which produces the same results as when you use a remote path that does not exist locally.
SCOTT@orcl_11g> CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
Table created.
SCOTT@orcl_11g>
SCOTT@orcl_11g>
SCOTT@orcl_11g> INSERT into test values(3,'c:\nosuchpath\nosuchfile.pdf');
1 row created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> CREATE INDEX test_index ON test(text) indextype is ctxsys.context
2 parameters ('datastore ctxsys.file_datastore
3 filter ctxsys.auto_filter');
Index created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> select count(*) from dr$test_index$i
2 /
COUNT(*)
0
SCOTT@orcl_11g>
Maybe you are looking for
-
ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3
Hi, we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA. Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios
-
Copy document from one library to other when workflow is completed in sharepoint.
I have created a state machine workflow for document library for template approval process .When workflow is completed ,i need to need to copy that document to other library on the same site. Regards, .NetUser
-
IDOC reduction for MSG type MATMAS
HI all, i have a requirement where clients need only some standard segments and some particulars staructure.We are using MATMAS as a message type and MATMAS05 as a basic type.Basically it leads us for IDOC reduction. Can someone pl
-
How to enable shortcuts on "MAC" as in windows. (ie : Alt+I+I = for image size in PS )
How to enable shortcuts on "MAC" as in windows. (ie : Alt+I+I = for image size in PS ) Im using a mac system and adobe CS6 package. mainly works with Indesign, Illustrator and Photoshop. But shortcuts doesn't works like Alt+I+I, Alt+I+S..... like tha
-
JPA entities to the database generation
Hi, I am trying to create JPA entities in an EJB diagram and then automatically get the tables created in a database schema. I started by creating some entities from the Entity wizard, then added some fields, dragged them into the diagram and added s