Oracle 9i Lite Mobile Server deploye Problem As Apache Module

I am trying to get the Oracle9i Lite Mobile Server run as a Module under Apache.
my platform is Linux 7.2, which of course is documented as an option.
I managed to install the mobile server and the following document is
the latest from ORACLE site. and is very useful.
http://technet.oracle.com/docs/products/lite/doc_library/release501/readme.htm#new
I have one problem to overcome the module to load in Apache
'libwtgapach.so'
is the required shared library.
This does not load due to following error,
Cannot load /var/ORACLE/mobile/server/bin/libwtgapach.so into server:
/var/ORACLE/mobile/server/bin/libwtgapach.so: undefined symbol:
ap_global_ctx
All the libraries can be resolved here is the ldd ( link map )
ldd libwtgapach.so
liborafc.so => /var/ORACLE/mobile/server/bin/liborafc.so (0x40007000)
libjvm.so => /var/ORACLE/jdk/jre/lib/i386/classic/libjvm.so
(0x4002a000) libhpi.so =>
/var/ORACLE/jdk/jre/lib/i386/green_threads/libhpi.so (0x400bd000)
libdl.so.2 => /lib/libdl.so.2 (0x400dd000)
libpthread.so.0 => /lib/i686/libpthread.so.0 (0x400e1000)
libstdc++-libc6.1-1.so.2 => /usr/lib/libstdc++-libc6.1-1.so.2
(0x400f7000)
libm.so.6 => /lib/i686/libm.so.6 (0x40139000)
libc.so.6 => /lib/i686/libc.so.6 (0x4015c000)
libnsl.so.1 => /lib/libnsl.so.1 (0x40297000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
I found this post explaining to recompile Apache
This actually means you installed mod_ssl as a DSO, but
. without rebuilding Apache with EAPI. Because EAPI is a
requirement for mod_ssl, you need an extra patched Apache
(containing the EAPI patches) and you have to build this
Apache with EAPI enabled (explicitly specify --enable-rule=EAPI
at the APACI command line).I recompiled apache with the following
./configure --prefix=/usr/local/ssl-apache/httpd-2.0.39
--enable-rule=EAPI ; make ; make install
I still get the same error when I try to load the module.Am I missing
something?
Any help is deeply appreciated.
-- ajith

Scott, I have yet to get WTG server to work as an NT service when loaded as an Apache module.
We've had to load it into a non-service based Apache server (one that runs from the command line in a MS-DOS prompt window). This is on XP Pro.
We've switched to running our WTG server on Linux.

Similar Messages

How to install the oracle lite mobile server?

hi,every one!
I follow the wizard of the oracle lite mobile server,then
pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
tells me that "invalid server name",how can i do?
somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

Andy,
It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
TNX,
Phil

Oracle Lite Mobile Server Standalone Version

We are planning to run the Mobile Server in the DMZ and wanted to run the Mobile Server as standalone on it's own box. I found in the documentation that Oracle does not recommend to run the standalone version in production. Oracle recommends that the production use the Oracle Application Server for the middle-tier.
Does anyone know why Oracle recommends we don't use Mobile server as standalone in a production environment?
Message was edited by:
Javier Ruiz

I have used the stand-alone as a production solution with 1000 users synching approx 2 GB a day and users databases having databases ranging from 50 MB to 1 GB.
I am deploying to app server and here is what I have found to be better.
* <strike>better</strike> easier management of the JVM. Actually, maintenance in general is much easier. I like the performance monitors that come with application server. Easier then logging into a telnet session and using mpstat and prstat.
Does it limit you going stand-alone? No.
But I would recommend that the bigger the system, the more robust your application server should be. Both in hardware and software (webcache, app server)

Oracle 10g Lite Mobile Devices

Hi,
1. Does Oracle 10g lite Support Arabic?
2. Does Oracle 10g lite Support Windows Mobile 5.0, PPC 2005?
3. On a PPC 2003 OS the sync worked well but after it finished the device manager started to register the device on the mobile server, there is an error raised that has invalid error code and as description 'Insufficient information to proceed',
Help Me In That Please?

Hi,
ad 1: Oracle Lite should support all the charsets the "big" Oracle server supports - even unicode afaik.
ad 2: yes, OLite supports WM5 (you have to install a patchset from metalink to enable WM5 support - try to search previous threads)
ad 3: what is the regional settings of your device? if it's some arabic culture which is not present in default OLite installation, you'll have to make some changes into Oracle Lite system tables to support your platform. In OL10g the "platform" is defined as a combination of OS type, CPU type and current OS culture settings - for example something like "WM5 + XScale CPU + czech culture". I used something like this to replace all the japanese platforms with our language to enable support for devices wit czech locale settings:
UPDATE mobileadmin.dm$all_platforms
SET NAME = REPLACE(NAME, ';JA', ';CS'),
TYPE = REPLACE(TYPE, '_JA_', '_CS_')
WHERE NAME LIKE '%;JA';
INSERT INTO mobileadmin.DM$LANG_MAP
(LANG_ID, LANG_NAME, LANG_CODE, LANG_REG, CODE_PAGE)
VALUES
('CS', 'Czech', 'CS', 'CZ', '1250');
you'll than probably also need to copy some files from default US locale to your new locale directory:
{ora10gLiteR2}\mobile_oc4j\j2ee\mobileserver\applications\mobileserver\setup\us => {ora10gLiteR2}\mobile_oc4j\j2ee\mobileserver\applications\mobileserver\setup\{your_locale}
than the device should be able to get registered...

Branch Office - Mobile Server connection problem

Branch Office is successfully installed on a XP-PC inclusive the services are started, Mobile -Server is installed on a remote Server. After login with user and password in http://localhost/webtogo/ "Branch Office Web" it takes a while (we think in case of synchronization) but then we get the message at the left side of the browser "javax.servlet.ServletException: Could not get Automatic Sync Status"
We think its a problem of the connection to the Mobile-Server but we have no Idea, how we can solve this problem because we can't verify the problem. There is no firewall and no restriction in our network.
We hope that anybody has an idea!

BTW. How may concurrent user can be support by Oracle9iLite?

Oracle 9i Lite Mobile

Where can I find the API documentation for
oracle.mobile.admin.ResourceManager ?
The oracle.lite.sync.Consolidator API docs refer to this API in
several places as the preferred replacement for deprecated
methods but I can't find the javadoc for these classes anywhere.
Thanks,
Allen.

In your Oracle 9i Lite Documentation index, look for 'Web-to-Go
API Specification' (is right below of 'Consolidator Admin API
Specification' link in the References).

External table in Oracle 10g and Windows server 2003 problem

I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063.
I have the [seemingly] exact same setup in an Oracle 9i and Windows 2000 server environment which works perfectly. Services run as local SYSTEM and SYSTEM has full permissions on the disk. Directories exist and so do the permissions to the directories.
In the Oracle 10g and Windows 2003 environment, services run as local SYSTEM and SYSTEM has full permissions on the mapped disk. Directories exist and so do the permissions to the directories.
This obviously effects mappings, deployments, etc.
Does anyone know if something changed in either the db or the os?
Thank you,
Michael

Thank you for your reply.
Your proposal is the standard solution. As a matter of fact, that's how it is on my "old" system. Server "A" Oracle services are started by SYSTEM. Server "B" Oracle services are started by SYSTEM and is where the flat files reside. SYSTEM has full permissions on a disk local to Server "B". Database directoriies defined on Server "A" point to Server "B" remote disk. External Tables on Server "A" are defined with directories that point to Server "B" remote (mapped) disk. I have no problems with this configuration.
I'm having a problem acheiving the same configuration with Oracle 10g and Windows 2003. I guess I'm baffled over the fact it isn't working the same way as my "old" environment. Why shouldn't it? Oracle (and you) want me to start services as a specific user. It shouldn't have to be that way unless something changed in the way the database makes calls to the os or if Microsoft slipped something in with one of it's numerous security patches.

Oracle Service Bus configuration project deployment problem

I cannot deploy the "OSB30 Book Conf" configuration project to the server. "The specified domain path is not a valid Oracle Service Bus domain" error appears. Where is the domain path specified? Where can I get know which paths are valid Oracle Service Bus domains?
I am using OSB 10.3.1, WebLogic server 10.3, Oracle Workshop for WebLogic 10.3 running on RHEL4.
Thank you.

Your first message about "THE SPECIFIED DOMAIN PATH IS NOT A VALID ORACLE SERVICE BUS DOMAIN" is the most annoyingly stupid message and wasted days of my time when I was trying to script the creation of an OSB domain.
The way Workshop decides that a domain is a valid OSB domain or not is by checking the config.xml for the prescense of "lib/kernel.ear" - if that's not EXACTLY like that, that it decides its not a valid domain.
If you look in the config.xml, you must have an entry like
<app-deployment>
<name>XBus Kernel</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>C:\osb1031\osb_10.3/lib/kernelEar</source-path>
and not something like this
<app-deployment>
<name>XBus Kernel</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>c:\domains\user_projects\applications\MyESB11g/kernelEar</source-path>
It's all to do with the path you choose for the applications when creating the domain and there's a bug raised for it. Sounds like you're working anyway.
Pete

Weblogic server deployment problem.

Dear All,
I create a package as webservice. I deployed it into the weblogic server. When i start the webservice, it shows this error.
java.lang.Exception: [DeploymentService:290049]Deploy failed for id '1,239,100,872,065' since no targets are reachable.
Nothing displayed under the webservice
Thanks
Resmi

You're welcome.
I assume you are looking for an answer to your problem, though ;)
Perhaps a bit more explanation is in order:
I create a package as a webserviceExplain more what you mean - a PL/SQL package? A Java package (which doesn't make sense as a web service by the way)? Do you mean you created a Java class that you wanted to be made into a web service? How did you create the web service based upon the "package?"
I deployed it into the weblogic serverAgain, how? What are the steps you used?
When I start the webserviceHow do you start a web service? Do you mean when you start the Weblogic Server? Do you mean when you try to access the web service?
Nothing displayed under the webserviceAgain, not clear at all what you mean. Web services don't "display" things. Do you mean when you attempted to call the web service from some tool, you got no result back?
Sorry to nitpick your question apart, but it's really important to be both complete and precise when you ask a question.
Best,
john

CORBA Server Deployment Problem

Hi,
I was trying to run the Hello CORBA Tutorial example included
in Jdeveloper2.0. I got stuck with the "Deploying the CORBA
Server Object" where Step 7 needed to use 2481 as IIOP port
and Step 8 needed testing. Since I only configure 1521 TCP
port in listner, I always got 'Can not find resource' error
message when testing the connection. (I have pasted these
two steps from the tutorial below).
where/How do I configure the IIOP 2481 connection/listner?
Where do I get IIOP? Please advise. Thanks.
Mei
============================================================
Step7 : For your ORB Connection Information, provide the host
name of your database, the Service (SID), and port number(the
default port for IIOP is 2481). If you do not know the values
for these fields, contact your database administrator.
Step 8: Test the connection by clicking Test Connection. The
message, "Success!" appears if all goes well. Click OK to
close the dialog box. MyCORBAConnection database connection
is now selected in the connection list, and summary
information appears below it. Click Next. ... ...
==============================================================
null

Hi
If it is NT machine you can use 'Net8 Configuration Assistant' to
create a listerner which can take IIOP connections. By default
the listener listens on port 2481.
Did you try putting 2481 as port number in the connection manager
Check out the messages with subject
' Invincible iiop connection problem '
and
'How to get IIOP to work with port 2481'
on this forum they have very useful info..
Also check the Net8 documention for more info.
regards
mei (guest) wrote:
: Hi,
: I was trying to run the Hello CORBA Tutorial example
included
: in Jdeveloper2.0. I got stuck with the "Deploying the CORBA
: Server Object" where Step 7 needed to use 2481 as IIOP port
: and Step 8 needed testing. Since I only configure 1521 TCP
: port in listner, I always got 'Can not find resource' error
: message when testing the connection. (I have pasted these
: two steps from the tutorial below).
: where/How do I configure the IIOP 2481 connection/listner?
: Where do I get IIOP? Please advise. Thanks.
: Mei
: ============================================================
: Step7 : For your ORB Connection Information, provide the host
: name of your database, the Service (SID), and port number(the
: default port for IIOP is 2481). If you do not know the values
: for these fields, contact your database administrator.
: Step 8: Test the connection by clicking Test Connection. The
: message, "Success!" appears if all goes well. Click OK to
: close the dialog box. MyCORBAConnection database connection
: is now selected in the connection list, and summary
: information appears below it. Click Next. ... ...
: ==============================================================
null

Flex + amf php server deployment problem

Hi all,
After almost a month of research on this problem. I was able to remove all my errors on production but still not able to retrieve data.
Please help......
Here is the scenerio details :
I created a form which will take input from user and store those values in database.you can visit it here on web server :
http://www.accurateoptics.in/
I followed all the steps mentioned on adobe's test drive tutorial. It works fine on my local machine with WAMP installation. But the moment,
I upload it...Bang!!!! there comes the error ::::
Channel.Connect.Failed error NetConnection.Call.BadVersion: : url: http://www.accurateoptics.in/gateway.php
I googled again, read a lot of articles and figured out that some changes are required in my gateway.php and amf-config.ini files for production environment.
Did the necessary changes and uploaded again.Bang!!!!!!! new error comes:::::::
Channel disconnected before an acknowledgement was received.
to solve this, again googled a lot and figured out that i need to upload zend framework files so, did that and setting up the path for zend in amf-config.ini.
uploaded again.
Now, i am stuck at this point where no error is thrown only an alert box comes with a ok button. also, data is not retrieved from server.
I dont know what error i am making.here is my amf-config.ini file:::::::::::::
[zend]
;set the absolute location path of webroot directory, example:
;Windows: C:\apache\www
;MAC/UNIX: /user/apache/www
webroot =http://www.accurateoptics.in
;set the absolute location path of zend installation directory, example:
;Windows: C:\apache\PHPFrameworks\ZendFramework\library
;MAC/UNIX: /user/apache/PHPFrameworks/ZendFramework/library
;zend_path =
zend_path = ./ZendFramework/library
[zendamf]
amf.production = true
amf.directories[]= http://www.accurateoptics.in/services
here is my gatway.php file :::::::::::::;
<?php
ini_set("display_errors", 1);
//$dir = dirname(__FILE__);
$dir = '.';
$webroot = $_SERVER['DOCUMENT_ROOT'];
//$configfile = "$dir/amf_config.ini";
$configfile = "amf_config.ini";
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library';
//Load ini file and locate zend directory
if(file_exists($configfile)) {
$arr=parse_ini_file($configfile,true);
if(isset($arr['zend']['webroot'])){
$webroot = $arr['zend']['webroot'];
$zenddir = $webroot. '/ZendFramework/library';
if(isset($arr['zend']['zend_path'])){
$zenddir = $arr['zend']['zend_path'];
// Setup include path
//add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
$dirs = $amf->directories->toArray();
foreach($dirs as $dir) {
// get the first character of the path.
// If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
$length = strlen($dir);
$firstChar = $dir;
if($length >= 1)
$firstChar = $dir[0];
if($firstChar != "/"){
// if the directory is ./ path then we add the webroot only.
if($dir == "./"){
$server->addDirectory($webroot);
}else{
$tempPath = $webroot . "/" . $dir;
$server->addDirectory($tempPath);
}else{
$server->addDirectory($dir);
// Initialize introspector for non-production
if(!$amf->production) {
$server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
$server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
?>
Looking for some help!! Thanks in advance..............

Please elaborate.
I tried visitng http://www.accurateoptics.in/endpoint.php
but "page not found " returned
However, i also tried visitng "http://www.accurateoptics.in/gateway.php"
it shows me this echo result on page " Zend Amf Endpoint ".
so, if i m reaching to this place that means my gateway.php and amf-config.ini is fine.
the problem is somewhere else in any of these three files.

Oracle form 6i client server deployment in windows

I am looking for a utility that will automatically deploy the forms, reports, and database objects.
For Example, in the tool's UI, I enter where the source code is, i.e., c:\source ( which contains fmb, rdf, stored procedures, or db scripts), I also enter the db connect info, such as user name, pwd, and db name, I also enter the network detination folder, i.e. s:\uat\
Then I click a button, "Deploy", the tool should automatically compile the fmb and rdf, generate the fmx and rep, and put on the network folder. And, it will take the pkgs and db scipts and compile against the db I specify.
Please advise if there is a tool like this.
Thanks in advance.
Frank

I don't know of any tool that will do that. But you may be able to use these commercial tools to write your own script to do it.
http://www.orcl-toolbox.com/
http://www.orcl-toolbox.com/fapimasterscripts.asp

Palm 5 and 9i Lite (mobile Server)

Hi all,
Does 9i Lite can be used in the new Palm5 environment???

No, the next 5.0.3 release will certify Palm 5

Jsr168 portlet deployment problem in Apache Pluto...

Hi Friends ...i am new to this Apache Pluto..
Accuvally i am trying to deploy my portlets in Apache Pluto 1.1.7 with Tomcat 5.5.20
i tried with the Following procedure
http://portals.apache.org/pluto/v11/deploying.html
but after deploment and when i am hitting the Page i am getting the Problem like
Error rendering portlet.
javax.portlet.PortletException
     at org.apache.pluto.core.DefaultPortletInvokerService.invoke(DefaultPortletInvokerService.java:191)
     at org.apache.pluto.core.DefaultPortletInvokerService.render(DefaultPortletInvokerService.java:101)
     at org.apache.pluto.core.PortletContainerImpl.doRender(PortletContainerImpl.java:172)
     at org.apache.pluto.driver.tags.PortletTag.doStartTag(PortletTag.java:152)
     at org.apache.jsp.WEB_002dINF.themes.portlet_002dskin_jsp._jspx_meth_pluto_portlet_0(portlet_002dskin_jsp.java:99)
     at org.apache.jsp.WEB_002dINF.themes.portlet_002dskin_jsp._jspService(portlet_002dskin_jsp.java:74)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
     at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
     at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
     at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:966)
Could any one help in resolving this ...
And i have one more doubt .....
Using Maven tool and creating WAR ... is this compulsory to Deploy any portlet in Apache Pluto ?+
Thanks & Regards
Suresh.Vadlamudi

Hi Friends ...i am new to this Apache Pluto..
Accuvally i am trying to deploy my portlets in Apache Pluto 1.1.7 with Tomcat 5.5.20
i tried with the Following procedure
http://portals.apache.org/pluto/v11/deploying.html
but after deploment and when i am hitting the Page i am getting the Problem like
Error rendering portlet.
javax.portlet.PortletException
     at org.apache.pluto.core.DefaultPortletInvokerService.invoke(DefaultPortletInvokerService.java:191)
     at org.apache.pluto.core.DefaultPortletInvokerService.render(DefaultPortletInvokerService.java:101)
     at org.apache.pluto.core.PortletContainerImpl.doRender(PortletContainerImpl.java:172)
     at org.apache.pluto.driver.tags.PortletTag.doStartTag(PortletTag.java:152)
     at org.apache.jsp.WEB_002dINF.themes.portlet_002dskin_jsp._jspx_meth_pluto_portlet_0(portlet_002dskin_jsp.java:99)
     at org.apache.jsp.WEB_002dINF.themes.portlet_002dskin_jsp._jspService(portlet_002dskin_jsp.java:74)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
     at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
     at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
     at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:966)
Could any one help in resolving this ...
And i have one more doubt .....
Using Maven tool and creating WAR ... is this compulsory to Deploy any portlet in Apache Pluto ?+
Thanks & Regards
Suresh.Vadlamudi

Oracle Database Lite deploying EJBs and struts

I need to deploy my enterprise application on Mobile server. My application uses EJBs and struts, are EJBs and Struts supported by Oracle Database Lite Mobile server? If yes do we need to do anything different for deploying EJBs on Mobile Server?
Regards
Roomap

Already posted a response to this here today
New Application

Oracle 9i Lite Mobile Server deploye Problem As Apache Module

Similar Messages

Maybe you are looking for