Oracle 9i on linux 9 with $GB RAM

Hi,
I have Oracle 9i installed on linux 9.
I also SGA not >1.7GB.
I have read that installing Linux AS 2.1 would help recogainising more RAM ,but after some configurations.
But I have my database running .also i dont have Linux AS
Can anyone helpme how to tune linux 9 ,so as to have more than 1.7 GB of SGA.
Pls guide.
vini

Try with
$ LD_ASSUME_KERNEL=2.4.1 ./runInstaller
Also check installer error log file eg. /tmp/OraInstall2004-01-10_11-12-41PM/oraInstall2004-01-10_11-12-41PM.err

Similar Messages

Host Credential Problem in Oracle 10g on Linux with EMdbconsole HELP!!!!

Please help.
I'm trying since five days I cannot find solutions.
When I try to put the preferred credentials in enterprise manager I get the error:
"Connection to host localhost as user oracle failed: Cannot locate EMD for target localhost, type host."
I've tried with root and oracle user with the same result.
I'm running EM dbcontrol NOT grid control.
Also in em I cannot see the name of the listener and host in General section.
Please HELP!!!
Many, many thanks.
Nicola.

Many thanks again.
Here the emoms.trc file:
2005-12-06 02:08:50,590 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ias.ias.IASIntegration
2005-12-06 02:08:51,452 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.eml.target.slb.common.SLBIntegration
2005-12-06 02:08:52,011 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.eml.ssl.intg.SSLIntegration
2005-12-06 02:08:52,181 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.tip.oem.central.domain.ProcessConnectDomainIntg
2005-12-06 02:08:52,185 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
2005-12-06 02:08:52,190 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
2005-12-06 02:08:52,194 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.webdb.admin.em.SSOIntegration
2005-12-06 02:08:52,199 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.reports.em.RepIntg
2005-12-06 02:08:52,206 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsEmailIntegration
2005-12-06 02:08:52,210 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOidIntegration
2005-12-06 02:08:52,215 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
2005-12-06 02:08:52,220 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
2005-12-06 02:08:52,225 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
2005-12-06 02:08:52,244 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration
2005-12-06 02:09:01,110 [JobWorker 319:Thread-14] ERROR em.jobs executeCommand.159 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup to set required parameters.
2005-12-06 02:09:41,344 [JobWorker 360:Thread-15] ERROR ping.ProcessExecutor execute.299 - timeout while gathering output
2005-12-06 02:09:41,454 [JobWorker 360:Thread-15] ERROR jobs.pingCfmEMDDown pingHost.439 - TimeoutException caught pinging the host for EMD URL http://localhost:1831/emd/main
2005-12-06 02:10:32,085 [MetadataLoad http://localhost:1831/emd/main:A0000000001.dat] ERROR eml.XMLLoader markFileAsError.730 - Failed to load A0000000001.xml because of errors; moving to errors directory
2005-12-06 02:10:51,202 [XMLLoader0 30000000003.xml] ERROR emdrep.XMLLoaderContext loadFromStream.1098 - Error while loading : java.sql.SQLException: ORA-20206:
ORA-06512: at "SYSMAN.ECM_CT", line 298
ORA-01403: no data found
ORA-06512: at line 1
java.sql.SQLException: ORA-20206:
ORA-06512: at "SYSMAN.ECM_CT", line 298
ORA-01403: no data found
ORA-06512: at line 1
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:180)
     at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:783)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1095)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2901)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:2992)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4124)
     at oracle.sysman.util.jdbc.PreparedStatementWrapper.execute(PreparedStatementWrapper.java:622)
     at oracle.sysman.emdrep.dbjava.loader.XMLDocumentSplitter.preLoadProc(XMLDocumentSplitter.java:1327)
     at oracle.sysman.emdrep.dbjava.loader.XMLDocumentSplitter.startElement(XMLDocumentSplitter.java:639)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1181)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:300)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:267)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
     at oracle.sysman.emdrep.dbjava.loader.XMLDocumentSplitter.split(XMLDocumentSplitter.java:372)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoaderContext.loadFromStream(XMLLoaderContext.java:1074)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoader.LoadFile(XMLLoader.java:440)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoader.LoadFiles(XMLLoader.java:593)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoader.run(XMLLoader.java:1146)
     at java.lang.Thread.run(Thread.java:534)
2005-12-06 02:10:51,252 [XMLLoader0 30000000003.xml] ERROR eml.XMLLoader markFileAsError.730 - Failed to load 30000000003.xml; moving to errors directory
2005-12-06 02:10:51,259 [XMLLoader0] ERROR eml.XMLLoader run.1180 - Exception caught while loading: ORA-20206:
ORA-06512: at "SYSMAN.ECM_CT", line 298
ORA-01403: no data found
ORA-06512: at line 1
java.sql.SQLException: ORA-20206:
ORA-06512: at "SYSMAN.ECM_CT", line 298
ORA-01403: no data found
ORA-06512: at line 1
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:180)
     at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:783)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1095)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2901)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:2992)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4124)
     at oracle.sysman.util.jdbc.PreparedStatementWrapper.execute(PreparedStatementWrapper.java:622)
     at oracle.sysman.emdrep.dbjava.loader.XMLDocumentSplitter.preLoadProc(XMLDocumentSplitter.java:1327)
     at oracle.sysman.emdrep.dbjava.loader.XMLDocumentSplitter.startElement(XMLDocumentSplitter.java:639)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1181)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:300)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:267)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
     at oracle.sysman.emdrep.dbjava.loader.XMLDocumentSplitter.split(XMLDocumentSplitter.java:372)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoaderContext.loadFromStream(XMLLoaderContext.java:1074)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoader.LoadFile(XMLLoader.java:440)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoader.LoadFiles(XMLLoader.java:593)
     at oracle.sysman.emdrep.dbjava.loader.XMLLoader.run(XMLLoader.java:1146)
     at java.lang.Thread.run(Thread.java:534)
2005-12-06 02:10:51,292 [XMLLoader0] WARN eml.XMLLoader run.1227 - Rolling back transaction.
2005-12-06 02:14:14,164 [EMUI_02_14_13_/console/pref/setCredentials$targetType=oracle*_database] ERROR creds.SetPrefCreds saveCreds.1070 - SetPrefCreds.saveCreds(): SQLException: ORA-01403: no data found
ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 115
ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 202
ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 334
ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 965
ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1082
ORA-06512: at line 1
2005-12-06 02:14:41,068 [EMUI_02_14_40_/console/pref/setCredentials$targetType=oracle*_database] ERROR creds.SetPrefCreds testCreds.1281 - SetPrefCreds.testCreds(): CredsException: Connection to host localhost as user oracle failed: Cannot locate EMD for target localhost, type host.
2005-12-06 02:17:23,825 [EMUI_02_17_23_/console/pref/setCredentials$targetType=oracle*_database] ERROR creds.SetPrefCreds testCreds.1281 - SetPrefCreds.testCreds(): CredsException: Connection to host localhost as user oracle failed: Cannot locate EMD for target localhost, type host.
2005-12-06 02:23:22,261 [CacheManager] ERROR cache.CacheManager run.519 - Exception message: sleep interrupted
java.lang.InterruptedException: sleep interrupted
     at java.lang.Thread.sleep(Native Method)
     at oracle.sysman.emSDK.svc.cache.CacheManager$Checker.run(CacheManager.java:507)
     at java.lang.Thread.run(Thread.java:534)
2005-12-06 16:20:44,073 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ias.ias.IASIntegration
2005-12-06 16:20:44,834 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.eml.target.slb.common.SLBIntegration
2005-12-06 16:20:45,150 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.eml.ssl.intg.SSLIntegration
2005-12-06 16:20:45,307 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.tip.oem.central.domain.ProcessConnectDomainIntg
2005-12-06 16:20:45,312 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
2005-12-06 16:20:45,316 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
2005-12-06 16:20:45,320 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.webdb.admin.em.SSOIntegration
2005-12-06 16:20:45,325 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.reports.em.RepIntg
2005-12-06 16:20:45,332 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsEmailIntegration
2005-12-06 16:20:45,338 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOidIntegration
2005-12-06 16:20:45,343 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
2005-12-06 16:20:45,357 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
2005-12-06 16:20:45,362 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
2005-12-06 16:20:45,371 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.265 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration
2005-12-06 16:22:10,392 [MetadataLoad http://localhost:1831/emd/main:A0000000001.dat] ERROR eml.XMLLoader markFileAsError.730 - Failed to load A0000000001.xml because of errors; moving to errors directory
Regards,
Nicola.

Oracle10g Installation problem on Linux with DHCP IP

Hi,
I am new to Oracle Products, I have tried to install Oracle 10G on Linux with DHCP IP.
I got the following warning while installing even though I have loopback interface configured.
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Please help me in resolving this problem or Can I ignore this message?
My Server Configurations:
[root@SQAESMRH5 Oracle_Install_Errors]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:3F:79:FA:2C
inet addr:10.10.121.61 Bcast:10.10.121.2 Mask:255.255.255.0
inet6 addr: fe80::212:3fff:fe79:fa2c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20751998 errors:0 dropped:0 overruns:0 frame:0
TX packets:19278549 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2150795393 (2.0 GiB) TX bytes:438232502 (417.9 MiB)
Interrupt:177
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12383146 errors:0 dropped:0 overruns:0 frame:0
TX packets:12383146 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1965045834 (1.8 GiB) TX bytes:1965045834 (1.8 GiB)
[root@SQAESMRH5 Oracle_Install_Errors]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
#::1 localhost6.localdomain6 localhost6
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost6
[root@SQAESMRH5 Oracle_Install_Errors]#

This warning means it is not recommended to install Oracle 10g on a DHCP assigned IP address. It could work, but you won't be able to configure Enterprise Manager, since this tool requires a fixed IP address. If possible, have the IP address fixed.
~ Madrid
http://hrivera99.blogspot.com/

Oracle Workflow 2.6 with Oracle 8.1.7 for linux

Is Oracle Workflow Server 2.6 available for Linux as a
standalone product against an Oracle 8.1.7 database?
Oracle Workflow does not seem to be included in the Integration
Server option with the 8.1.7 installation.
I've only found the Oracle Workflow Server included with the 9i
database. Will this work with 8.1.7 as well or does it require
9i db?
Thanks in advance for your help,
Josi Antonio

Is Oracle Workflow Server 2.6 available for Linux as a
standalone product against an Oracle 8.1.7 database?
Oracle Workflow does not seem to be included in the Integration
Server option with the 8.1.7 installation.
I've only found the Oracle Workflow Server included with the 9i
database. Will this work with 8.1.7 as well or does it require
9i db?
Thanks in advance for your help,
Josi Antonio

Oracle client in linux problem with tnsnames.ora

hi all
i installed oracle-xe-cleint10.2 on linux machine i did not get any tnsnames.ora in my machine i am unable to connect to database. it shows tns connectiont identifier unfound. . is it come all with oracle client or some where else it .
or further any proceeding i should follow steps. if found solution regard this pls forward solution to me
Regard
syam

hi all
i did not get any tnsnames.ora after installing oracle client in linux machine
i installed oracle-xe-cleint10.2 on linux machine i did not get any tnsnames.ora in my machine i am unable to connect to database. it shows tns connectiont identifier unfound. . is it come all with oracle client or some where else it .
or further any proceeding i should follow steps. if found solution regard this pls forward solution to me
Regard
syam
Regards syam

Oracle Unbreakable Enterprise Linux come with an ndiswrapper kernel module?

Hello
Does Oracle Unbreakable Enterprise Linux come with an ndiswrapper kernel module?
Does Oracle Unbreakable Enterprise Linux come with a package for the ndiswrapper kernel module that matches the kernel version?
What wireless driver is compatible with Oracle Unbreakable Enterprise Linux?

Hi,
Oracle Unbreakable Linux does not come with any ndiswrapper kernel module and any package for ndiswrapper module. But it includes many wireless network drivers. You can look at them from kernel package. For example
rpm -qlp kernel-2.6.18-8.el5.i686.rpm |grep wireless
From the output, you can find which wireless drivers are coming with Oracle Unbreakable Linux kernel.

Oracle 8i, SuSe Linux, big performance Problem

Hello,
i have a very interisting problem on SuSe Linux 7.0 (or 7.1).
Engine: Fujitsu Siemens Primargy, 4 Processors, 4 GB RAM
I want to make a hot backup.
After i set the tablespace in backup mode i make a copy of the tablespace.
On that moment goes nothing more with Oracle.
There is no input/output from/to the database. (Every select needs extremly long time)
Have anybody an idea? (I hope so)
What is the break?
Oracle or SuSe Linux? (Any other jobs do the computer all right, very quick)
Bye and thanks
Michael
null

Hello,
i forgot to give a very important detail:
The load average goes from 0.4 up thru 5.X (at that moment i must kill the job)
sorry that i don't write it in the main letter.
Bye and thanks for every hint.
Michael
null

Running Apps 11i on Linux with 200 concurrent users

Hi,
Is there anybody out there running a large apps 11i installation (with the
database and middle tier) on Linux ?
We are currently running 11.5.9 Apps with a 9.2 database on Sun kit but I'd
like to investigate Linux/Intel as we are planning to replace our hardware.
We have about 200 concurrent users, with a total of 1800 registered users, using
Financials, i-Procurement and HR.
Thanks
Tony Vallis

Having worked extensively on Linux, its true that is is limitied in 32 bit mode to addressing a few GB of memory for each application (It is at least better than windows with its 2/3GB limit), although you can play around with it and memory windows to get more out of it for the database tier.
We have used 1 * 6650 with 8GB RAM running AS 2.1 DB Tier
and 2 * 2650 with 8 GB RAM ruuning AS 2.1 Apps Tier with conc mgrs too.
This was with 11.5.10 and it comfortabley supported 200 users. The servers were 2.8GHz Dual core Xeons. Redhat 3 or 4 would have been better becuase of a file cache issue on the database tier.
Also rememeber to consider Oracle licensing, A faster CPU might cost alot more but when oracle licenses are based on core/cpus then you may save alot more by having the highest power cpus u can (MHz rating not ness cores). Sun T2000 servers are quite nifty too if you want to stay with traditional unix kit but not want the price tag.
When workign at internally in Oracle We quoted one client a 3 * 4 CPU 6650 with 8GB in RAC config with 12 * 2 CPU 2650 with 4GB to support 5000 concurrent users. I wasnt convinced this would work at the time but the client had massively over estimated the number of users they would actually have so all was fine.
If I was doing this now I would go for a single 64bit DB tier with 4 CPUs and lots of memory, I would have lots of small8gb mid tiers 2850's, with a hard ware load balancer in front and a dedicated GB backend network. I would ony go for RAC if I needed the resiliance or had a large number of users e.g. 1000+
All in my opinion and I am in no way suggesting this as a solution for any other customers. Always perform a hardware siazing exercise in conjunction with your hardware vendor (remembering they always want you to buy more hadrware than u need).

Any suggestions for virtualising servers with 1GB RAM

Hi Guys
I now have 5 old servers with < 1GB RAM so p2v fails. Has anyone else had this issue and how do you get round it without having to try and source old, out of date RAM? Any help, suggestions appreciated. This might sound crazy but the only thing I can think of at the moment is to virtualise them into a VM environment then export them out and into the Oracle VM environment.
Richard

You can use a Knoppix to boot the physical server and transfer the filesystems you wish to migrate.
Reference prior posting,
P2V
There are number of advantages vs the "linux p2v" method.
Cheers,
Jim

Z77A-GD65 no longer boots with 4 RAM modules

I had 4 x 8GB Cosair Vengeance LP that used to work fine, but no longer boots into Windows with 4 but only with 2 RAM modules. Any help in solving the issue would be appreciated. ( I need 32 GB as I run many virtual machines )
The 4 modules worked fine for few months until couple weeks ago, when I saw issues with booting into Windows 7. The workaround was to "warm up" by leaving the PC in BIOS for about 5 minutes and it would boot fine. Since couple days ago, it would POST but not boot into Windows or into live Linux on USB, so I started troubleshooting with bare bones first ( MB, CPU, 1 RAM, PS ) and then starting adding more and more components until I found that 1 and 2 RAM modules worked in either black or blue rail but with 4 RAM modules, it will POST, but not boot at all into either USB based live system or into Windows 7.
Memtest with 2 separate sets of modules pass with flying colors. Mixing the sets work fine too, but add 2nd set (i.e. 4 modules) and it fails to boot. I am leaning more toward believing the issue is with the MB than with the RAM since mixing them doesn't throw any memory error.
Any suggestion on how to check if it's the RAM or MB ?

Quote from: PirateDog on 25-November-13, 00:23:30
If these were 2 kits mixed, ...
These were 2 mixed kits.
Quote from: XFM on 25-November-13, 07:01:42
What voltage is the RAM running? A slight bump up in voltage might help.
As to voltage, I started with standard 1.5 and then incrementally upped it to 1.65v. At 1.6v and above, it does boot into Windows, but intermittently goes into BSOD... Works perfect with 1.5v with 2 RAM modules.
I'll save the money for next build instead of going for 32GB kit. ... guess I'll live with 16GB for now.
Thank you all for the advice.

10g Grid (RAC) on Linux with ASM and OCR?

I was trying to install 10g on Linux with ASM. The docs are not terribly clear on this, but I'd like to have the Oracle Cluster Registry (OCR) on one of my four ASM disks, rather than dedicate space to OCFS. I have 4 18.2 GB drives setup with ASM now. Is there a way to do this?
I guess the other thing I could do is to cut the ASM disks into two partitions. One, say 200MB and the other the rest. I'd put OCFS for OCR on the 200MB partition on one of the disks. The large partition on each of the rest of the disks would be dedicated to ASM.
What am I missing? I feel it must be something obvious. I'd rather have the OCR on the ASM, so that I don't have to deal with it...
Thanks!
Jeff

Hi.
There shouldn't be a problem with this provided you use a 32-bit OS on the 64 bit machine. RAC doesn't care about the chipset, so long as the same OS is used, but I don't thinkit will support one node on 32 bit and one on 64 bit, since they are actually separate distributions.
Of course, I've never tried it so I can't be sure :)
Cheers
Tim...

Imp dmp file in oracle 10g on linux

i have oracle 10g on linux now i want to imp the dmp file to db.
i put the file in /mnt/erp/file.dmp folder.
i log in as oracle user and ....
and start the imp the file as
imp user/password file=/mnt/erp/file.dmp
but it giver error faile to open the file for read.....
what is the problem.....
is there any privillage issue???????????
helped with full syntax...and steps...

i copy the dmp file in /mnt/erp folder as root user.
i am going to imp it as oracle user.
sir i don't know about dmp group.
i past the error i got..
[oracle@lnxdb erp]$ imp
Import: Release 10.2.0.1.0 - Production on Wed Oct 10 08:09:37 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: FS_10oct2012
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 -
Production
With the Partitioning, OLAP and Data Mining options
Import file: expdat.dmp > FR_10_10_2012.dmp
IMP-00002: failed to open FR_10_10_2012.dmp for read

How to install oracle 10g on linux 9.0

am a student in nigeria and my name is tosin, studing oracle 10g on linux 9.0 with oracle partners NIIT. how do i install 9i and 10g on a linux 9.0.

Hello Tosin,
how do i install 9i and 10g on a linux 9.0. Do you mean Red Hat Linux 9 of on Linux AS? www.redhat.com
Anyways
http://www.puschitz.com/InstallingOracle9i.html
Hope this will help you
Cheers
Ravi
http://ravidba-oracle.blogspot.com/

Can't install Oracle 8 in Linux 6

I can't install Oracle 8 in Linux 6 because I encounted the
following error during installation:
Error during action 'Running startorcl.sql'.
Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
@/u01/app/oracle/admin/orcl/create/startorcl.sql
exit
What should I do ? Please help me.
null

Bjarne (guest) wrote:
: Jameshow (guest) wrote:
: : I can't install Oracle 8 in Linux 6 because I encounted the
: : following error during installation:
: : Error during action 'Running startorcl.sql'.
: : Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
: : @/u01/app/oracle/admin/orcl/create/startorcl.sql
: : exit
: : What should I do ? Please help me.
: I got the same error message, and I still haven't figured out
: what to do. If there are anyone who can help, I think we both
: would appreciate it. Please help us both.
Hi there!
The first thing you should do if you get ANY (almost) error when
installing Oracle Server in RedHat Linux v6,0 is to read this
document carefully: http://jordan.fortwayne.com/oracle/
After hours of struggle it finally worked for me :-)))))
Only two things to add here:
1) If you want to be able to connect to the Linux server
(telnet) and running utilities like sqlplus locally on the
server, you should copy the ".profile" file to the users home
directory, add the user to the group "dba" AND make sure that
the $ORACLE_HOME directory has execute permissions for members
of the "dba" group (mine had default ONLY permission for the
owner to execute).
2) The file "listener.ora" was (for some reason) written
with "oracle_sid" where it really should say the real SID name
that is in my case "ORCL".
I just can't thank the guy who wrote the step-by-step
Installation guide for Oracle on RedHat Linux enough... THANK
YOU!
null

Oracle 9i on LINUX Transparent Gateway for SQL Server

Does anybody know if there is a Transparent Gateway available for Oracle 9i on LINUX to connect to SQL Server? I have run the installer and cannot seem to find the install options for any Transparent Gateways. I am familiar with their location in the universal installer as I have installed the Oracle/SQL Server Transparent Gateway with Oracle in WinNT. Perhaps Transparent Gateways for Oracle/LINUX are not available?
Thanks in advance.

I have the same issue - we want to upgrade our 9.2 to 10g Linux, and need to maintain connectivity to some legacy sqlserver databases. I can't find any mention of tg4msql for linux. What gives? Anyone know the answer to this? thanks, michael

Dual boot kali linux with windows 8

i have ideapad y510p and i want to dual boot kali linux with windows 8
i want a full guide to do it please !!help!!!

Hello,
if you got problems with the kernel, you can try backbox-linux. The kernel there is newer. It is based on Ubuntu 12.04 LTS.
Have a nice day
thoschi
LENOVO IDEAPAD Z710 59403383,i7-4700MQ,8 GB DDR3-RAM,1.920 x 1.080 Pixel,NVIDIA® GeForce® GT 740M,Hybrid (1 TB S-ATA + 8GB SSD)

Oracle 9i on linux 9 with $GB RAM

Similar Messages

Maybe you are looking for