Oracle Application Server 10.1.0.2 contains JDK 1.4?

I download Oracle Application Server 10.1.0.2 and this contains JDK 1.4. How alter to JDK 1.5 or 1.6?

You need to decide if you want to use the configuration I pointed too above which lets you use JDK 5 in an OC4J 10.1.3 installed under an OAS 10.1.2.
If you don't want to take this approach and you want to deploy directly into the OC4J that comes with OAS 10.1.2 and supports JDK 1.4 - then you'll need to setup JDeveloper to compile with JDK 1.4 - instructions for this are here:
http://download.oracle.com/docs/html/B25947_01/deployment_topics006.htm#CIHGIAAE

Similar Messages

Apex Listener vs. Oracle Application Server... advantages?

Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?
We have an existing application server instance in production. Would introducing Apex Listener and the extra overhead be of any advantage?
Thanks in advance for your thoughts.

Hello "Portal Dude",
Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?APEX Listener introduces some additional features, such as Resource Templates, but lacks some others. Some people might want to migrate from OAS to another JEE Container that doesn't come along with a OHS/mod_plsql. Depending on the JEE Container, you could use AJP for load balancing, avoiding plain HTTP through a firewall, etc.
Would introducing Apex Listener and the extra overhead be of any advantage?The "extra overhead" may be smaller than you think. If you don't need the HTTP_Server component any longer, but can just deploy APEX Listener on the OC4J of your OAS, you might even save some bytes.
For several other aspects, there have been a few posts on that topic in the past:
{thread:id=1100122}
{thread:id=1555908}
{thread:id=1594158}
If there's anything you don't find in either the posts or the documentation, don't hesitate to ask.
-Udo

Client-cert auth impl in web.xml does not work in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

Oracle Application Server 10g Cloning - Urgent

Hello All,
I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
Eagerly waiting for a reply

user12077492 wrote:
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
To make a redundant/alternate environment for OAS, you can do the following:
- a) either use the same infra on machine 1, and install another midtier and register with the same infra.
- b) or install a separate infra on machine 2, and also a midtier registered with it.
Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
Oracle® Application Server Administrator's Guide
10g Release 2 (10.1.2)
B13995-08
[10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
For b), you will need to Stage a server as defined in this reference.
[11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
hope that helps!
AMN

Oracle Application Server 10g R3 with patch set 10.1.3.5.0

Hi All,
Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
Please help me.
Regards,

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

How to create client stub while deployign EAR on Oracle Application Server

Hi,
I have deployed an EJB on Oracle Application Server 10g 10.1.2.0.2. And i want to call this ejb from other app server using ejb client. For that i need client stub.
Is there any way I can create client stub while deploying EJB on the OC4J?
I am sure there will be some options.
Thanks and Regards
AT

Amit,
It depends on which transport protocol you use to transmit both the client requests and the server responses: either IIOP or ORMI.
Here's how it works: if you've chosen the IIOP protocol, the client stubs are generated at deploy time and stored in the iiopClient.jar file. Once created, you append this file to your java client's classpath.
Now, if your choice is ORMI, the client stubs are created on demand by the container, so there is no need to append any jar file to the client classpath.
Consult the OC4J Services Guide in the Official Oracle Application Server docs for further inforrmation on this topic, specially the "Remote Method Invocation" chapter.
RB

Does Oracle Application Server (10.1.3.4.0) support JSF 1.2?

Sorry for the double post, but I realized this was more appropriate in the OC4J forum so posted it there. Not sure how to delete this one :-(.
I am trying to migrate from JSF 1.1 to JSF 1.2 on OC4j 10.1.3.4.0 and am running in to problems. I recently stumbled on this post:
http://kjvarga.blogspot.com/2008/12/oc4j-1013-does-not-support-jsf-12.html
Which reads as follows:
I spent a very frustrating day wading through the version soup that is JavaServer Faces and trying to deploy a JSF 1.2 app on on OC4J 10.1.3 container. To save you a lot of time, OC4J DOES NOT SUPPORT JSF 1.2.
This technical paper explains that OC4J 10.1.3 (all versions) supports Servlet 2.4, JSP 2.0 and JSF 1.1.
http://www.oracle.com/technology/tech/java/oc4j/1013/whitepapers/OC4J-FOV-10131.pdf
And this handy webpage explains that "JSF 1.2 is the latest release and it works with servlet 2.5 and jsp 2.1". So obviously it's not compatible. It also details all the versions of Java technologies that each JSF version relies upon.
http://www.roseindia.net/jsf/jsf-versions.shtml
Is this true? I can't use the JSF spec released in 06 on the most current version of oracle application server? Could someone please confirm/deny/shed some light?
Thanks so much,
Yeuker
Edited by: yeuker on Jun 29, 2009 10:54 AM

Found a bit more information located here:
http://wiki.glassfish.java.net/Wiki.jsp?page=JavaServerFacesRI
See the section entitled
"Do I have to use a JSP 2.1/Servlet 2.5 container with the Mojarra version 1.2?" which states:
If you're using JSPs for your view descriptions, then yes, you will need to use a JSP 2.1/Servlet 2.5 compliant container. However, if you're using another view technology, such as Facelets or JSFTemplating, you can run JSF 1.2 within a Servlet 2.4 container with out issue.
Now here is the part that may make me look like a newb... not sure if I am "using JSP's for my view descriptions"... what does that mean anyway?
I dont think I am not using Facelets or JSFTemplating. I'm just using standard JSF... All of my pages end in jsp and the standard faces servlet that makes all *.faces requests go through the faces controller servlet. There is really no JSP EL code in my faces pages, just standard jsf tags h:form, f:selectItems, h:inputText etc...
So my question is... am I using JSP's for my view descriptions?

Configure OID 10.1.4.0.1 with Oracle Application Server 10.1.3.3

Dear gurus,
I have configured OID 10.1.4.0.1 and MRCA 10.1.4.0.1 on database 10.2.0.3 with Oracle Application Server 10.1.3.3 (HTTP Server and OC4J Server). it went well, i could login into my oid or sso page. then i deployed a simple jar file into OAS 10.1.3.3 and i updated few lines in mod_osso.conf on midtier 10.1.3.3, so it look like this :
==================================================================================================
LoadModule osso_module libexec/mod_osso.so
<IfModule mod_osso.c>
OssoConfigFile /u01/oraias/midtier/Apache/Apache/conf/osso/osso.conf
OssoIpCheck off
OssoIdleTimeout off
# Insert Protected Resources: (see Notes below for how to protect resources)
# Notes
# 1. Here's what you need to add to protect a resource,
# e.g. <ApacheServerRoot>/htdocs/private:
# <Location /private>
# require valid-user
# AuthType Basic
# </Location>
<Location /JABSUAT>
require valid-user
AuthType Basic
</Location>
<Location /HR>
require valid-user
AuthType Basic
</Location>
</IfModule>
# If you would like to have short hostnames redirected to
# fully qualified hostnames to allow clients that need
==================================================================================================
my application faces name is HR, so i called the URL http://devel.sas.co.id:7778/HR/faces/HomeMenu.jspx, the output was sso login page, so i did login with username : orcladmin and password : oracle1 but it turned me error page on browser, it said :
=========================================================
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
=========================================================
and i found that in /u02/oid/Apache/Apache/logs/error_log.1249430400 contains these lines :
[Wed Aug 5 09:13:33 2009] [notice] Accept mutex: fcntl (Default: sysvsem)
[Wed Aug 5 09:13:33 2009] [warn] long lost child came home! (pid 4924)
[Wed Aug 5 09:14:01 2009] [error] [client 172.16.2.14] [ecid: 1249438441:172.16.5.11:5080:0:2,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:04 2009] [error] [client 172.16.2.14] [ecid: 1249438444:172.16.5.11:5068:0:3,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:24 2009] [error] [client 172.16.2.14] [ecid: 1249438464:172.16.5.11:5093:0:2,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 09:49:36 2009] [error] [client 172.16.2.14] [ecid: 1249440576:172.16.5.11:5074:0:20,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:30:01 2009] [error] [client 172.16.2.14] [ecid: 1249443001:172.16.5.11:5096:0:25,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:34:13 2009] [error] [client 172.16.2.14] [ecid: 1249443253:172.16.5.11:5102:0:26,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:58:58 2009] [error] [client 172.16.2.14] [ecid: 1249444738:172.16.5.11:5093:0:40,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 10:59:09 2009] [error] [client 172.16.2.14] [ecid: 1249444749:172.16.5.11:5093:0:41,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at devel.sas.co.id Port 7782
Note : 172.16.2.14 is my pc and 172.16.5.11 is OID and MRCA's IP, please need your suggestion, Many Thanks.
Regards
Edited by: andes on Aug 4, 2009 9:23 PM
Edited by: andes on Aug 4, 2009 9:28 PM

Dear gurus,
i have solved my problem, i re-run ssoreg.sh and re-configure mod_osso.conf, now it's working.
Regards

Urgent :- Unable to deploy EAR file in Oracle application server

Hello folks,
I am trying to deploy an application containing jsps and servlets
packaged into EAR using ant. However when am trying to do so by using
the Deploy EAR option in the Enterprise manager, it throws the
following error -
"Invalid J2EE application file specified - Jar file:
/var/tmp/jar47241.tmp is missing its standard xml descriptor located at
META-INF/ejb-jar.xml"
I suspect that something could be wrong with regards to the way the ear
file has been created.
Please if someone could pin point the problem and help me understand
the the above error message , it will be of great help to me and I d
really appreciate this.
Many Thanks,
Ramn.

Hello,
I try to deploy an ear file (contains jar and war files) in Oracle Application server in linux, but the time is so long. The same file I deploy in a OAS in windows and the deploy time was 2 minutes, but in linux I leave the hole night and the session close and the deploy in unable.
I don't know if I need configure an especial option in the OAS in Linux, how I can load my ear file.
The OAS in windows was installed with oc4j options only, but the OAS in linux was full installation
Please help me....
Thanks.

Compilation problem in Oracle Application Server (9.0.x)

Hi All,
I have a JSP Page, with more than 200 controls, arranged in a tabs. When I try to run this file under Tomcat or JBoss, it runs fine. But when I run it in Oracle 9iAS (9.0.x), it fails to run. The difference is in the way the servlet is generated from the JSP file. In case of Tomcat and JBoss, the generated java file contains multiple methods for each component, so it runs fine. But in case of Oracle Application Server, the generated file has only one method jspService, which contains all the code. Because of this, the JVM throws an error saying "code too large public void jspService(HttpServletRequest request... ".
Can anyone help me on this issue? Do you know of any configuration setting for the compiler?
Thanks and Regards,
Aniket.

Wich processes don't start? do you have this services in Automatic?
Can you try to pass the to manual, and start the procs suing opmnctl command and check the logs of it?
Regards

Oracle Application Server-Unable to start "WebCache" process.

Hello,
Using "Oracle Application Server" 10g. Right Now, I am getting below error while starting oracle application server by using below commands.
./opmnctl startall ( To start entire oracle service modules)
./opmnctl startproc process-type=WebCache
Both commands giving below error.
./opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
================================================================================
opmn id=warlock3:6200
0 of 1 processes started.
ias-instance id=ias_admin.warlock3
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=250340)
failed to start a managed process after the maximum retry limit
Log:
/oracle/ora10gas/opmn/logs/WebCache~WebCache~1
Also, WebCache event log is showing below message.
[28/Sep/2010:13:23:30 -0530] [notification 9610] [ecid: -] The server is exiting.
[28/Sep/2010:13:23:30 -0530] [alert 9000] [ecid: -] Process 250338 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
[28/Sep/2010:13:23:32 -0530] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[28/Sep/2010:13:23:32 -0530] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[28/Sep/2010:13:23:32 -0530] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[28/Sep/2010:13:23:32 -0530] [alert 13305] [ecid: -] Failed to assign port 7777: Address already in use
[28/Sep/2010:13:23:32 -0530] [alert 9707] [ecid: -] Failed to start the server.
[28/Sep/2010:13:23:32 -0530] [alert 9609] [ecid: -] The server process could not initialize.
[28/Sep/2010:13:23:32 -0530] [notification 9610] [ecid: -] The server is exiting.
[28/Sep/2010:13:23:32 -0530] [alert 9000] [ecid: -] Process 250340 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
Kindly let me know how to solve this issue.
Regards,
Nishith N.Vyas.

Hi,
I have not experience with Oracle Names resolution, but did you start the server "NAMESCTL> START" ? (I'm not sure)
On the client, the SQLNET.ORA file contains an entry that lists onames first in the NAMES.DIRECTORY_PATH parameter ?
e.g.: NAMES.DIRECTORY_PATH=(onames, tnsnames, hostname)
There are some messages on the listener.log file ?
Cheers

Oracle Application Server 10g/Oracle Fusion Middleware 11g

Hi folks, This question related to migration/upgrade of Oracle Application Server infrastructure.
I see that the Oracle has come up with Oracle Fusion Middleware 11g. Is it the next release of Oracle Application Server 10g. I have the following questions. Appreciate if any one can provide answers to the following questions. Please correct me if my understanding of these oracle products is not right! Thanks
1. What is the future of Oracle Application Server?
2. Is it Oracle Fusion Middleware(OFM) 11g is the upgrade path if one need
to upgrade?
3. Is it expected that expected that customers need(if require) to move to OFM 11g?
4. Does OFM 10g comes with Oracle Application Server? If not what does
it comes with?
5. If it does not, what about customers having applications built using oracle forms and reports? Does OFG 11g
support Oracle forms and reports?
I understand that OFM 10g comes with Oracle web logic server!
Thanks in advance.
movva

To run Forms and Reports in Oracle Fusion Middleware 11g you have to use the distribution "Portal, Forms, Reports and Discoverer" in the FMW 11g software pack.
The structure of what we used to call "the application server" has changed a bit however, in the following way:
- In 11g you need to install the Javaserver WebLogic software (version 10.3.3 for the current Forms 11g version 11.1.1.3) first.
In 10g the installation of the Javaserver (OC4J) was part of the App server install.
Note that you just have to install the software, the configuration script for creating a Forms app server instance creates the WebLogic domain (comparable with the OC4J instance) for you.
- In 11g the Fusion Middleware software installation is separate from the creation of an application server instance.
This is more convenient and comparable to Oracle database and Weblogic installation.
- The Fusion Middleware Configuration script installs two parts of the product: 1. A WebLogic Domain. 2. A Fusion Middleware instance.
The first contains everything related to Java, such as the servlet configuration file (formsweb.cfg), while the latter contains everything that has less to do with the Javaserver
- No more Infrastructure server
The Infrastructure server does not exist anymore. If you want to use Single Sign On with Forms/Reports 11g you can install Identity Management 10.1.4.3 (or use Identity Management 11g, and configure separately the 10.1.4.3 Single Sign On) or keep your old 10g Infrastructure installation.
During installation you just have to specify you want to use OID and SSO and it configures out of the box.
Under normal circumstances the same licenses apply to 10g and 11g (as long as you do not use WebLogic for other purposes).

Focus lost in Oracle Application Server

Dear All,
We developed a custom system using Oracle Forms Developer 10.1.2.0.2. An Oracle Application Server 10g runs our forms. Users use it across the Internet using MS Internet Explorer 7. If a form contains 2 blocks and a user clicks the another block, the focus remains at previous block even the cursor is in the proper field.
It used to work properly for a while (about 6 months). About 3 weeks ago the administrator restarted the server due to an error and since then we have been noticing this problem. We tried different versions of Java, different browsers(IE 7 and Firefox 3.6.3) at client side but the result is the same. I think the problem must be at server side but I don't have more ideas where it is.
Can anybody help me?
Thanks & Regards,
Laszlo

Laszlo,
Use the Sun Java console in Internet Explorer to see if you can find any errors ( IE -> Tools -> Sun Java Console). There is not much to see here but you can turn all kinds of logging on. See:
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/console.html
regards,
Bernhard Jongejan
http://bernhardjongejan.spaces.live.com

Oracle Application Server Install Issue

Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
Sheik

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Oracle Application server related issue

My application is developed using Oracle Developer suite 10g (10.1.2.0.2 ) and deployed in Oracle Application Server 10g R2 (10.1.2.0.2) in windows 2003 32 bit and its working fine.
My issue is as follows
1. Since Oracle Application Server 10g R2 (10.1.2.0.2) is not supported in windows 2008 64 bit, pls advise what version of Application Server 10g i should use. Please note that my
programs are developed using Oracle Developer suite 10g (10.1.2.0.2 ).
2. If i want to move to next development version (ie forms / Reports 11g) , which version of application server should i use.
Joe

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Oracle Application Server 10.1.0.2 contains JDK 1.4?

Similar Messages

Maybe you are looking for