Oracle Application Server 10.1.3 on WinXP (x64)

Hello,
i would like to know, if there is a 64bit-Version of Oracle Application Server 10.1.3 available which can be installed on Windows XP (x64) or if at last a release date for such version exists.
kind regards
chris

Thank you for the response. Actually I came from the pages you proposed. But since I installed "Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)" on the very same machine, which can be found on the Oracle Database 10g Download page, I thought that for "Oracle SOA Suite 10g" there should be the equivalent. However all I found on the "Oracle SOA Suite 10g" downlaod page was "x86" (which means 32bit imho) and "Itanium" (which is 64bit, but the wrong Processor). If somebody could please enlighten me if there is a 64bit Version of "Oracle SOA Suite 10g" to run on the AMD64 Processor I would be gratefull. By the way: I know that I can run the x86-Version on the AMD64, but as I said, I'm looking for a 64bit Version of "Oracle SOA Suite 10g"
kind regards
chris

Similar Messages

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

Developing for a Oracle Application Server with SSO

Hello there,
I'm developing an application (Java) that will be deployed as a partner application within an Oracle Application Server 10g at my client. This Oracle instance has a SSO already configured, and my app will use this Identity Manager (consuming the cookie). The problem is that at my company we don't have a SSO system configured, not even an Oracle Application Server, just a simple Oracle XE 10g to hold data. So I'm wondering how can I do to develop my application and test it.
I was looking forward to install an OAS and configure an SSO to validate my implementation, but the download link provided by Oracle is broken (http://www.oracle.com/technology/products/ias/index.html). Another alternative that I thought of was to install an OC4J and configure a Java SSO to simulate the behavior of OSSO, and make my app the cookie set by it. But OC4J supports only til Servlet 2.4 and my app is using 2.5...
And to complete, I cannot access my client's environment. I'm supposed to write a Deploying document telling him how to deploy my app and then try to access it through Internet.
Does anyone have an idea of how can I develop and test my app in my company's environment?
Thanks in advance,
Bruno Krebs.

Apache 2.0 based OHS is located in Oracle Application Server Companion CD.
Pavna

Oracle application server release 2

hi
i am trying to download oracle 10g application server Release2 from the link
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
but everytime when it starts downloading,it remains on 0% only..
is there any other link by wich i can download the oracle application server release2.....plz help

hi
install download manager and after that try to download application server.
sarah

Oracle Application Server Release 2 (10.1.2) Deployment Notes question

Hi!
I'm following the Oracle Application Server Release 2 (10.1.2) Deployment Notes (http://download-uk.oracle.com/docs/html/B25947_01/deployment_topics006.htm) for deploying an application, built in Jdeveloper 10.1.3 to AS 10.1.2. I have a question about Configuring JDeveloper to Generate Configuration Files That Are J2EE 1.3-Compliant. Do I need all the files in table 34-3? (http://download-uk.oracle.com/docs/html/B25947_01/deployment_topics006.htm#CIHHBJAI)
I already have some of these files. Can I change the version of existing files or do I need new ones? How can I change the version of existing files?
Here are the headers of some of these files:
web.xml: (Here I probably just change version="2.4" to version="2.3")
<?xml version = '1.0' encoding = 'windows-1250'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
 version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee">
orion-application.xml: (Is version="10.0" the version I need to change to "1.2"?)
<?xml version = '1.0' encoding = 'windows-1252'?>
<orion-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://www.oracle.com/technology/oracleas/schema http://xmlns.oracle.com/oracleas/schema/orion-application-10_0.xsd"
 version="10.0"
 xmlns="http://www.oracle.com/technology/oracleas/schema">
data-sources.xml.xml: (This file has only XML version, I don't believe this is the version I need to change)
<?xml version = '1.0' encoding = 'windows-1250'?>I only have these three files from the table in my application. Do I need application.xml and oc4j-connectors.xml too?
Thank you in advance!
BB

Found some more details on this error in emias.log:
2007-11-21 09:22:54,538 [EMUI_09_22_54_/console/ias/oc4j/deployWiz/webModuleMappings$ctxType1=oracle*_ias$target=MY_AS_INSTANCE*_home$type=oc4j$ctxName1=MY_AS_INSTANCE$selectedStep=1]
ERROR ias.oc4j doWebModulesNavigation.920 - DeployWiz: Caught exception in doWebModulesNavigation
2007-11-21 09:23:49,054 [Thread-24] ERROR ias.oc4j doDeployWork.2628 - DeployWiz: Caught exception in doDeploy
java.lang.NoClassDefFoundError: oracle/dms/instrument/CorrelationContext
at oracle.ias.sysmgmt.task.TaskMaster.setContextECID(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
at oracle.sysman.ias.sta.oc4j.DeployAppAdminObj.deploy(DeployAppAdminObj.java:164)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2594)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)
2007-11-21 09:23:49,054 [Thread-24] ERROR ias.IASUtil displayError.753 -
java.lang.NoClassDefFoundError: oracle/dms/instrument/CorrelationContext
at oracle.ias.sysmgmt.task.TaskMaster.setContextECID(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
at oracle.sysman.ias.sta.oc4j.DeployAppAdminObj.deploy(DeployAppAdminObj.java:164)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2594)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)
2007-11-21 09:23:49,054 [Thread-24] ERROR util.iAS displayError.369 - An internal error occurred during the operation.
java.lang.NoClassDefFoundError: oracle/core/ojdl/query/LogQueryException
at oracle.sysman.ias.sta.oc4j.DeployWiz.removeAdminObjectsFromCache(DeployWiz.java:2708)
at oracle.sysman.ias.sta.oc4j.DeployWiz.doDeployWork(DeployWiz.java:2648)
at oracle.sysman.ias.sta.oc4j.DeployWiz.access$000(DeployWiz.java:179)
at oracle.sysman.ias.sta.oc4j.DeployWiz$DeployBean.doWork(DeployWiz.java:3098)
at oracle.sysman.emSDK.eml.util.iAS.ProcessingBean$ProcessingThread.run(ProcessingBean.java:264)
at java.lang.Thread.run(Thread.java:534)

SSL test in Oracle Application Server 10.1.2

Hi ,
we are using one Oracle Application Server Web Cache 10.1.2 as our web server.This redirects users to the Application Server.(EBS 12.0.4)
Now we need to implement SSL to secure user credentials.So i am planing to implement SSL in our web cacahe server.Will this be enough to secure user credentials??I dont have any idea.Please help.
Moreover our web cache is not configured in SSL during the time of installation.Can any body suggest me a place from where i could get one demo Certificate to put it onto my web server and test the SSL confiration.EBS has provided one demo for application tier(inside $ORACLE_HOME/apache/certs/).
But we will have to implement in web cahe tier not in application tier.
We are using EBS 12.0.4 in Hp-Ux v11.23.

Hi susmit;
Please chekc below note which could be helpful for your issue:
SSL Primer on Using OpenSSL as a Certificate Authority with E-Business Suite (with a Windows Example) [ID 1175193.1]
Enabling SSL in Release 12 [ID 376700.1]
R12.0.6+ : Oracle Application Object Library SSL Test Transaction Data Test [ID 732282.1]
R12.0.[3-4] : Oracle Application Object Library SSL Test Transaction Data Test [ID 564066.1]
Regard
Helios

Apex Listener vs. Oracle Application Server... advantages?

Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?
We have an existing application server instance in production. Would introducing Apex Listener and the extra overhead be of any advantage?
Thanks in advance for your thoughts.

Hello "Portal Dude",
Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?APEX Listener introduces some additional features, such as Resource Templates, but lacks some others. Some people might want to migrate from OAS to another JEE Container that doesn't come along with a OHS/mod_plsql. Depending on the JEE Container, you could use AJP for load balancing, avoiding plain HTTP through a firewall, etc.
Would introducing Apex Listener and the extra overhead be of any advantage?The "extra overhead" may be smaller than you think. If you don't need the HTTP_Server component any longer, but can just deploy APEX Listener on the OC4J of your OAS, you might even save some bytes.
For several other aspects, there have been a few posts on that topic in the past:
{thread:id=1100122}
{thread:id=1555908}
{thread:id=1594158}
If there's anything you don't find in either the posts or the documentation, don't hesitate to ask.
-Udo

Discoverer Plus associate with the Oracle Application Server Infrastructure

Hi Everyone,
I just install the Oracle BI (v 10.1.2.0.2) into my 2003 server so I could use the Discoverer Plus and Viewer. This is a stand alone BI installation (I guess, I have little knowledge about Discoverer plus or Oracle AS).
My question is how could I connect the Discoverer plus to my ODS database, so I could create report or view report.
and where to find the Oracle Application Server Infrastructure (or How do I know I have the Oracle Application Server Infrastructure?)
I read the Oracle BI Discoverer Configuration Guide, and it tell me to associate the Oracle BI with the Oracle Application Server Infrastructure to deploy the Discoverer. so I went to the BI Application Server Control page, the Infrastructure section, the Identity Management to configure the Internet Directory, so I could I have the public connection, but it didn't work.
Also do I real need the Oracle AS Infrastructure to make the Discoverer Plus work?
Thanks in advance
Kevin C
Kevin
Edited by: cmingl on Feb 11, 2010 1:30 PM

Hi Kevin,
Oracle AS Infrastructure is needed only if you are implementing SSO for Discoverer or using Public connection .
Else only Oracle AS Middle tier is sufficient to work with Discoverer Plus .
Regarding "how could I connect the Discoverer plus to my ODS database, so I could create report or view report"
You need to create the End User Layer (EUL) and then grant privilege to the EUL to users who will be creating the report .
Thanks,
Sutirtha

Client-cert auth impl in web.xml does not work in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

Client printer on oracle application server

Hi all.
I configured my own system on oracle application server and I connected my printer on client machine.
When I wanted to print through the application server on the printer I did not print.
Please could anyone shows me where is the error file (for the printer) located in oracle application server to check the error.
by

No. Not only it isn't certified, but it is also impossible to run forms compiled with the 11g compiler with the 10g runtime. For 11g there is a install bundle for the developer suite / application server.
cheers

How to install Oracle Report Services in Oracle Application Server 10.1.3.1

My project is running on Oracle Application Server(OAS) 10.1.3.1, and I need to develop some Oracle Reports for my client.
But I find out there is not "Oracle Report Services" component in OAS 10.1.3.1 like OAS 10.1.2.
Is there Oracle Report Services for OAS 10.1.3.1? How to get it?

Max Yuan wrote:
You mean I need to install 2 OAS(10.1.2 for report, 10.1.3 for my project), or deploy my project to 11g? For the Reports reporting project, you'll need a version/edition that includes AS Reports Services.
In "10gr2" that means AS 10.1.2.0.2 (plus Patch set): AS Infrastructure + AS BI&Forms installation (enterprise edition) or the standalone Forms and Reports installation (EE or separate licensing). You also need the Developer Suit (Reports Builder). OFM "11gr1" suite has some version of Reports Services but I don't know the available packages and installation types.

Oracle Application Server 10.1.3.5 and SSL

Hi,
We want to use SSL in combination with Oracle Application Server 10.1.3.5. I installed Oracle Application Server 10.1.3.5 on Windows 2008R2 64 bit. After that I installed 64 bit java(jdk-6-26-windows-x64.exe) to run jvm in 64bit. I'm facing the following problem. The wallet manager won't run on Windows 2008R2 64bit because we're using 64bit jdk. There is also a commandline version; mkwallet. When I start this up it says "Oracle Wallet Commandline tool for 32bit Windows" I also can't create a certificate or certificate request. When I install a 32bit java version I also get a different JAVA_HOME, and that I don't want.
What if I install Oracle Application Server 10.1.3.5 on a 32bit OS and use there also a 32bit jdk, then use wallet manager to generate a certificate? Can I than use this wallet on the 64bit windows and 64bit jdk?
What other options are there available in this situation to use SSL? Is for example keytool from java an option?
Kind regards,
Herman
Edited by: user1950921 on 21-nov-2011 3:59

Hi,
Here an update on this situation. I installed Oracle SOA Suite 10.1.3.5 on Windows 2008r2 64bit in a seperate environment. After that I installed the 32bit version of the jdk we used in the test and production environment. In the seperate environment I can startup Oracle Wallet Manager. Here I created a certificate request and then import the reply certificates from the CA. Then the wallet says "Certificate ready". In the directory where the wallet is, I put the certificate request, and the reply certificates. After that I copy the wallet-directory to the test environment(with a 64bit jdk) and in the ssl.conf file I point to the copied wallet-directory. After a restart of the app-server I got SSL.
Edited by: user1950921 on 2-dec-2011 0:11

Oracle AQ to JMS Queue which is on Oracle Application server

Hi,
I am using Oracle Streams AQ Oracle database 10g
and i have a JMS Queue on oracle Application server.
how i can Propagate message from Oracle AQ (AQ$_JMS_TEXT_MESSAGE)Queue to JMS Queue. ?
Thanks,
Satnani

Hi Justin,
Thanks for Reply, but in my case my JMS queue is on Oracle Application Server.
and i want to propagate message from AQ to JMS queue.
and none of the document is available to describe how to send message from oracle database AQ to JMS queue which is on application server.
please help
Thanks,
Satnani

How to install ADF Runtime libraries to an Oracle Application Server 10g?

Scenario:
- JDev 10.1.3 (production) installed on my Win XP station.
- OC4J 10.1.3 Standalone installed on my Win XP station.
- OAS 10.1.3 (not OC4J Standalone) installed on a Linux SuSe server.
- I have admin credentials for the OAS but don't for the server.
Is it possible to install ADF Runtime from OAS Enterprise Manager? If yes, please, let me know. If not, I will have to bother server admin in order to copy those files. In this case, ca I rely on the log html file resulted from the install I made on my local OC4J instance in order to select the needed files?
Thanks in advance.
Regards,
Gustavo
São Paulo - Brasil

As far as i know the ADF libraries can be updated via the solution you gave :
Tools -> ADF Runtime Installer -> Oracle Application Server
but this only applies for an OAS installed on the same machine where jdev resides
for OAS in UNIX like systems i'm not sure if this can be done
as far as i know the libraries must be copied manually but i can't confirm this theory
i would like to know if it's possible to update the libraries from the Wizard on jdev installed on a windows machine to an OAS installed in UNIX?

How to deploy a web service on Oracle Application Server 10.1.2.0.2?

Hi everyone,
I followed the instructions of the following link to create a web service using jDeveloper 10.1.3.1.0 on Oracle Application Server 10.1.2.0.2. [http://st-curriculum.oracle.com/obe/jdev/obe1013jdev/10131/devdepandmanagingws/devdepandmanagingws.htm#t1]
The web service created was deployed & used with no errors on the standalone OC4J instance.
But my goal is to deploy my web service on Oracle Application Server 10.1.2.0.2.
So after several attempts, I was able to deploy it on the Oracle Application Server 10.1.2.0.2 but unfortunately I didn't know the URL needed to use the web service.
I tried the following link (http://192.168.0.91:18100/JavaWebService-GetDates-context-root/GetDatesWSSoapHttpPort) but also didn't work :(
I also tried converting to J2EE 1.3 and still not knowing how to access the web service.
Please advice with a solution.
Thanks in advance.
Lana

Thanks everyone for your help :)
The problem turned out to be that Oracle application server 10.1.2 is unlike the others servers, it uses 2 ports:
- port (19100) is dedicated for the console.
- port (7779) is to view your applications.
So the URL needed turned out to be "http://acteos-109.beirut.acteos:7779/beanTest" instead of "http://acteos-109.beirut.acteos:18100/beanTest"
Hope this info is useful
Lana

Oracle Application Server 10.1.3 on WinXP (x64)

Similar Messages

Maybe you are looking for