Oracle Data Gatherer

Hello everyone,
I installed Oracle 8.1.5.0.1 on Linux Redhat 6.1. I start the
Inteligent agent, discover the service from the entreprise
manager console on a WIN98 station, but i can't start the data
gatherer.
The output from:
vppcntl -start is:
The Oracle Data Gatherer is runing.
vppcntl -ping is:
The Oracle Data Gatherer is not runing.
When i use the console debug option the output is:
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid =
5016
DBG: error
DBG: vppdgerr: ERROR: Error: unable to open file
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid =
5001
DBG: error
DBG: vppdgerr: ERROR: Error: unable to open data cartridge
registry file
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid =
5085
DBG: error
DBG: vppdgerr: ERROR: Error: failed to get DG cartridge
information
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid =
5773
DBG: error
DBG: vppdgerr: ERROR: Error: failed to initialize state
information during startup
The error 5001 is explained as follows:
05001, 0, "Error: unable to open data cartridge registry file"
// *Cause: an error occurred attempting to open the cartridge
registry file (svppcart.dat)
// *Action: ensure the file exists in the directory $OHOME/odg
and that it has read access
The file exist in the specified directory and has read access.If
i delete the file the error is the same.The content of the file
is:
ODB ALL vpxodb vpxodb
SOL ALL svpxos svpxos
If somebody has an ideea please tell me.
Thenks!
Costel

The data gatherer is not usable on Linux with the 8.1.5 release.
There is an existing bug (1121827) for this issue. You really
need to upgrade to 8.1.6 or 8.1.7 as everything works much
better on Linux with these versions.

Similar Messages

DATA GATHERER on Linux does not work

I have spent 2 days and it does not change, I can find 4 other posts in here where people asked for help and nothing ever happened.
It seems pretty clear that this is a waste of time so I am going to move on.
If I am mistaken, please tell what you know,
Thanks
[email protected]

Well its 815 on red hat 6.1 and when you load the data gatherer it
says its fine, then you get this from performance manager:
vtm-0005:Error connecting to server
java.net.ConnectException:Connection refused
oracle performance manager
Which means -> The Oracle Data Gatherer is not running
which is also the output from -test,
here is output from debug console
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid = 5016
DBG: error
DBG: vppdgerr: ERROR: Error: unable to open file
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid = 5001
DBG: error
DBG: vppdgerr: ERROR: Error: unable to open data cartridge registry file
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid = 5085
DBG: error
DBG: vppdgerr: ERROR: Error: failed to get DG cartridge information
DBG: Error: lmsagbf returned error in vp_get_catmsg(), msgid = 5773
DBG: error
DBG: vppdgerr: ERROR: Error: failed to initialize state information during startup
Sounds a little bit like there is some user account that it cant log into or
something, no idea
please help if you can, 4 other people had same problem, no solution.
cept to attempt data gatheref from NT but that doesnt seem to connect either.
Thanks!!
[email protected]
[email protected]

Data gatherer SUSE 6.2

Hi there, I have opened a TAR with support on this but I thought that I would pose the question to others.
I have installed 8.1.5.0.2 and the agent will start but data gatherer will not. I execute the command "vppcntl -start" and receive feedback "The Oracle Data Gatherer is running." I then ping it and I am told that the data gatherer is not running.
Any ideas?
Thanks,
James

Kari Pannila (guest) wrote:
: I try to start WEBDB but get only following lines
: to the log file:
: *** Oracle WebDb Listener Version 2.0.5.6.1 built
: on May 7 1999 at 14:16:59 **
: Attempting to Listen on hp.ougf.fi, port 90 at
: 27/Sep/1999:14:11:43.
: Fatal error: bind failed
: DNS is working properly... but what is wrong?
: rgrds Kari
This might happen because the IP for hp.ougf.fi is no local IP of
any interface on that system.
null

Oracle 9.2 OEM Data Gatherer won't connect to database agent

I'm trying to get an older version of Enterprise Manager (9.2.0.1) Data Gatherer to work with one of our 9.2 databases. The agent is running on the server but when I try to connect to the database instance using Capacity Planner from the OEM Console I receive the error "java.net.ConnectionException: Connection Refused".
We have opened port 1808 from the Windows server running the OEM Management Server to the Database server.
What I need to know is : do we have to have port 1808 opened in both directions (oem server to database server & database server to oem server), for the Data Gatherer to work.
Systems:
OEM:
Windows 2003 server
Oracle Enterprise Manager Management Server 9.2.0.1
Database:
Red Hat Linux AS4
Oracle Enterprise Edition 9.2.0.8
Thanks,
John

Vendor code 17002 generally means a major network problem like invalid host or port number. Using ssh tunneling complicates the troubleshooting. It may be best to try to replicate the other machine setup as far as possible, including ssh setup, name resolution and sql developer configuration.
These are the normal troubleshooting steps.
Given a SQL Developer connection definition of DBSERVER, 1521, ORCL...
Can you ping DBSERVER?
Can you telnet to DBSERVER on port 1521 (telnet DBSERVER 1521). If you don't have windows telnet you can use a putty telnet session.
I assume somewhere in your tunnelling setup you have something like locahost:1521 mapping to DBSERVER:1521. In that case you can replace localhost in the troubleshooting steps.

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

Powerpivot Data Refresh Not working with Oracle Data Source in sharePoint 2013

I am using SQL Server 2012 PowerPivot for Excel 2010. Getting the following error in SharePoint 2013 environment, when using Oracle data source within a workbook -
EXCEPTION: Microsoft.AnalysisServices.SPAddin.DataRefreshException: Engine error during processing of OLE DB or ODBC error: The specified module could not be found..:
<Site\PPIV workbook>---> Microsoft.AnalysisServices.SPAddin.DataRefreshException: OLE DB or ODBC error:
The specified module could not be found..
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing)     -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing)
at Microsoft.AnalysisServices.SPAddin.DataRefresh.DataRefreshService.ProcessingJob(Object parameters)
I created a simple Excel 2013 PPIV workbook with an oracle data source and uploaded that to SharePoint 2013, but no change in the results - still getting the above error.
What is this error? We have installed Oracle client (64-bit, since we use 64-bit Excel and Sp is also 64-bit) on SSAS PPIV Server and SharePoint Content DB Server. Do we need
to install it anywhere else?
Thanks,
Sonal

Hi Sonal,
To use PowerPivot for SharePoint on SharePoint 2013, it is required to install PowerPivot for SharePoint with the Slipstream version of SQL Server 2012 SP1. If you install SQL Server 2012 and then use the upgrade version of SQL Server 2012 SP1 to upgrade,
the environment will not support SharePoint 2013.
I would suggest you refer to the following articles:
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://technet.microsoft.com/en-us/library/jj218795.aspx
Upgrade SQL Server BI Features to SQL Server 2012 SP1:
http://technet.microsoft.com/en-us/library/jj870987.aspx
Regards,
Elvis Long
TechNet Community Support

Performance Manager and Data Gatherer

Hello,
I am looking for some basic info (I think). I have been using the EM Console - standalone for some time now but would like to use the diagnostic pack and Performance Manager. Can this be used in a standalone configuration or do I need to buy Enterprise Manager? If it works in a standalone configuration and I do not need to buy it, could you point me in the direction of documentation on how to start the data gatherer on my 9i database on AIX 5?
Thanks,
Jeff Graham

Post Author: Ferhat
CA Forum: Performance Management and Dashboards
you have to find the keyword to see...
i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
while you install, check the install performance management also(you have to have the keyword).

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

Performance issue with Oracle data source

Hi all,
I've a rather strange problem that I'm stuck on need some assistance on.
I have a rules file which drags data in via an SQL data source thats an Oracle server. If I cut/paste the 3 sections of "select" "from" and "where" into SQL-Developer and run the query, it takes less than 1 second to complete. When I run the "load data" with this rule file or even use the "Retrieve" with the rules file edit, it takes up to an hour to complete/retrieve the data.
The table in question being used has millions of rows and I'm using one of the indexed fields to retrieve the data. It's as if the Essbase/Rule file is ognoring the index, or I have a config issue with the ODBC settings on the server that is causing the problem.
ODBC.INI file entry for the Oracle server as follows (changed any sensitive info to xxx or 999).
[XXX]
Driver=/opt/data01/hyperion/common/ODBC-64/Merant/5.2/lib/ARora22.so
Description=DataDirect 5.2 Oracle Wire Protocol
AlternateServers=
ApplicationUsingThreads=1
ArraySize=60000
CachedCursorLimit=32
CachedDescLimit=0
CatalogIncludesSynonyms=1
CatalogOptions=0
ConnectionRetryCount=0
ConnectionRetryDelay=3
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
HostName=999.999.999.999
LoadBalancing=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=xxx
Password=xxx
PortNumber=1521
ProcedureRetResults=0
ReportCodePageConversionErrors=0
ServiceType=0
ServiceName=xxx
SID=
TimeEscapeMapping=0
UseCurrentSchema=1
Can anyone please advise on this lack of performance.
Thanks in advance
Bagpuss

One other thing that I've seen is that if your Oracle data source and Essbase server are in different geographic locations, you can get some delay when it retrieves data over the WAN. I guess there is some handshaking going on when passing the data from Oracle to Essbase (either by record or groups of records) that is slowed WAY down over the WAN.
Our solution to this was remove teh query out of the load rule, run it via SQL+ on a command line at the geographic location where the Oracle database is, then ftp the resulting file to where the Essbase server is.
With upwards of 6 million records being retrieved, it took around 4 hours in the load rule, but running the query via command line took 10 minutes, then the ftp took less than 5.

Unable to replicate oracle data into timesten

I have created CACHE GROUP COMPANY_MASTER
Cache group :-
Cache Group TSLALGO.COMPANY_MASTER_TT:
Cache Group Type: Read Only
Autorefresh: Yes
Autorefresh Mode: Incremental
Autorefresh State: On
Autorefresh Interval: 1 Minute
Autorefresh Status: ok
Aging: No aging defined
Root Table: TSLALGO.COMPANY_MASTER
Table Type: Read Only
But whenever I start timesten server the following lock seen in ttxactadmin <dsn_name>
Program File Name: timestenorad
30443   0x7fab902c02f0        7.22     Active      Database 0x01312d0001312d00   IX    0
                                                   Table     1733200              S     4221354128           TSLALGO.COMPANY_MASTER
                                                   Row       BMUFVUAAAAaAAAAFBy   S     4221354128           SYS.TABLES
                                                   Row       BMUFVUAAACkAAAALAF   Sn    4221354128           SYS.CACHE_GROUP
Due to the following lock oracle data is not replicated in timesten.
When we check sqlcmdid it shows following output
Query Optimizer Plan:
Query Text: CALL ttCacheLockCacheGp(4, '10752336#10751968#10751104#10749360#', 'S', '1111')
STEP:             1
LEVEL:            1
OPERATION:        Procedure Call
TABLENAME:
TABLEOWNERNAME:
INDEXNAME:
INDEXEDPRED:
NONINDEXEDPRED:
Please suggest why timesten take lock on following table.

966234 wrote:
Unable to download Oracle Data Integrator with version 11.1.1.6.Hope this could be resolved ASAP.What is the file you are trying to download? Is it for Windows or Linux or All Platforms?
Thanks,
Hussein

Unable to download Oracle Data Integrator-Version 11.1.1.6(Important)

Unable to download Oracle Data Integrator with version 11.1.1.6.Hope this could be resolved ASAP.

966234 wrote:
Unable to download Oracle Data Integrator with version 11.1.1.6.Hope this could be resolved ASAP.What is the file you are trying to download? Is it for Windows or Linux or All Platforms?
Thanks,
Hussein

Data Gathering Application - Architecture Question

I'm working on revising an existing application that's used to collect data gathered by users from various sources (various computer systems, paper files, discussions/interviews with other employees, etc.) which is then used for analysis and reporting of level of compliance with mandates at various levels (overall, location, individual).
The existing application gathers data via two basic form types: one is for a specific individual having multiple data points; the other is for everyone in the location with multiple data points. For example, type 1 looks like:
Person
Question 1 Response 1
Question 2 Response 2
Question N Response N
While the Type 2 form looks like:
Location
Person 1 Question 1 Question 2 ... Question N
Person 2 Question 1 Question 2 ... Question N
Person N Question 1 Question 2 ... Question N
The questions are grouped by types of information being analyzed, so that those questions appear on different pages and may apply to different sets of individuals or locations. Not all locations are required to gather information on the same questions, depending on their compliance level last year. So, location A may have to answer questions 1, 2 and 3, while location B may answer questions 1, 3 and 4.
My question is this: The table used to store the data is structed like:
Person ID, location, page, q1, q2, ..., qN
To continue the above example of locations A and B, both locations would store the responses in columns q1, q2, and q3 since they had three questions that applied to them. We can then reconstruct which question the response applies to by checking which questions applied to the location. We're using the apex api in the query to generate select-list items for the questions with the valid responses for each question (some are yes/no, others allow NA, a number 1-3, or a typed-in positive integer for a couple of questions).
Since we need to maintain the data from two forms (either for an individual or for all individuals at a location), would it be easier to maintain in APEX using a table that stores each question in a separate row?
PersonID, location, Page, question, response
Further, we want to simplify the application which currently uses a separate page for each item type which is customized to the max number of questions for that page for the year. Instead we want to make a more generic set of pages that can at least handle an arbitrary number of items or, ideally, however many questions may be applicable in the future. While we can assume that the practical upper limit would be 30 questions, in the future it is possible we could be mandated to ask several times that number, maybe 100 or more.
The main goal is to make the application robust to handle the questions consistenly, no matter how many are defined for a type and no matter how many are required for the selected individual or location.
I'm already working on the page simplification process by replacing literals with session-state and application items, and realize that to make the pages robust we'll have to convert from static queries to generating the query from plsql using generic columns for the report in APEX.
If anyone could share their thoughts/experience with this type of application, your input is greatly appreciated.
Thanks,
Richard

Hi Richard,
I find it bad practice to make a table PersonId, location, page, q,q1 .. qN
it will do more harm in analysing the data than you will benefit in collecting the information.
In my opinion you should normalize it a bit more. Seperate table for Person, with it's attributes. and if it is a 1 to 1 relation, also an locationId. Then a seperate table to hold the location information. Then you are having questions and awnsers. based on compliance level of the location persons may answer these questions. So in my opinion, youre location-table will have an attribute 'compliance_level' and in the question table also an attribute, like minimum compliance level. so this could be an criteria for showing questions or not.
To register the answers done bij a person, also an awnser-table will be nesseccary, with relation to the specific question and the personId who answer it. Because of the 1 to 1 relation between person and location, this information does not have to be registerd with the anwsers.
so in short:
5 tables =>
Person (id, name, locationId, etc. )
Location (id, locationName, complianceLevel)
Question(id, quetion, minCompliance)
Anwser(id, questionId, personId, answerId)
In order to create these forms, i guess a master-detail form will be in place. where for one master (person in this case), the details can be shwon (question) in a tabular form with input for the answers.
hope this will help!

Can SQL*Plus connect via ODBC to NON-Oracle data source?????

I am struggling to understand something. I downloaded Oracle instance client, SQL*Plus and ODBC components with the hopes of being able to connect via SQL*Plus to a non-Oracle/ODBC compliant database.
Is this possible? Or is SQL*Plus ability to connect via ODBC only to an Oracle data source??
Thanks...

sqlplus only connects to oracle. you can use the odbc driver from instant client to allow other applications to access oracle via odbc (e.g. excel). if you need to connect to non-oracle odbc database (ms-access, foxpro, etc.) you need odbc driver for those sources.
you can use sqldeveloper to connect to oracle and non-oracle databases. check otn product info for sqldeveloper for more details.

Error while installing Oracle Data miner 10G Release 2

Hello,
I am a student involved in research in Data mining. I am new to Oracle Database and data miner.
I installed Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1). Now I am trying to install ORacle data miner (10.2.0.1). However, at the time of installation ODM gives the following error:
"specified data mining server is not compatible. 10.1.0.4.0."
I have installed Oracle 10.2.0.1 but when I login using SqlPlus I get the following information -
SQL*Plus: Release 10.1.0.4.0 - Production on Sun Jul 23 09:52:41 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
I would be really obliged if someone can help me with this.
Thanks in advance
Pooja

Hi ,
Download and install the product version(10.2.0.1.) of Oracle Data Mining....
Simon

Oracle Data Miner 10.1.0.2 Interoperate with Database 10g Release 2

Hi all,
I cannot connect from Oracle Data Miner to a newly upgraded Database 10g Release 2 with Data Mining option. This database was 10.1.0.2 before upgrade, and I could connect via Oracle Data Miner before the upgrade (though it needs to be upgraded to 10.1.0.3+ for data mining to function).
I have similar problem for a new installation on another computer. The error message in either case is "Cannot connect to specified Data Mining Server. Check connection information and try again."
I can use SQL*Plus to login as the data mining user using the net service corresponding to the connect string. I check the v$option and DBA_REGISTRY as per the Data Mining Admin. documentation to verify that the data mining option exists and is valid. I am able to use the same connect string "host:port:SID" to connect from Analytical Workspace Manager to verify that the connectivity is OK.
Furthermore, some Oracle by Example seems not valid for a DB of version 10.2. For example, at the URL http://www.oracle.com/technology/obe/obe10gdb/bidw/odm/odm.htm#p, the point 6 <ORACLE_HOME>\dm\lib\odmapi.jar is not applicable, because the path <ORACLE_HOME>\dm no longer exists.
Therefore, I have query if Oracle Data Miner 10.1.0.2 can work with DB 10.2? What procedure should I follow? Please advise.
Thanks and regards,
lawman

I am waiting on the beta version since I have installed Oracle10gR2.
I've been checking the OTN website every day to see when it is released.
If it is not a bother, can you send me an email when I can download it.
Thanks in advance.
Have a wonderful day/weekend,
Andy

Oracle Data Gatherer

Similar Messages

Maybe you are looking for