Oracle Email Center Installation

Hi Experts,
Can anyone share the information of how to search & download Oracle modules?
For E.g: I need to Implement Oracle Email Center for a client. But before implementing, i need to install the module in the AS.
So, how to go about it?
Regards
Ari :)

Hi Hussein,
Its done. Now the download processor is working fine and successfully downloading the messages.
But few problems i'm facing which is not the required behavior is:
1. All the messages are downloaded and are shown in "Messages in Queue", but we've to get the messages one-by-one via "Get Next Message". Is there any way how we can populate all the oracle processed messages into the a/c inbox at once?
2. I've composed a mail to a valid random email address and put the action as SEND and clicked GO. The count of composed messages in the side panel shows as Composed: 1 but the message ain't sent.
3. The Oracle processed messages are often not available directly at the inbox when externally logged in. I mean, the download processor may be is deleting the message from mail server inbox and putting it into the Oracle Processed folder.
Please resolve this issues. I'm very thankful to you for your precious time.
Regards
Ari :)
Edited by: ac4991 on Mar 22, 2013 12:51 AM
Edited by: ac4991 on Mar 22, 2013 12:52 AM

Similar Messages

Oracle Email Center Calendar

Hi Guyz,
Can anyone provide some helpful docs on "Oracle Email Center Agent Console - Calendar Tab".
As the utilities of the Calendar Tab in the Agent Console is not properly described in the OEC User Guide.
So, if anyone has got some Oracle doc or custom doc. Please provide me, i'll be grateful.
Regards
Ari :)

We create synonyms for 11i tables in R12 and user the regular
APIs for creation of customer , install base ,contract ,service request
Etc..
This works very well for data conversion.
I am not sure if there are any Apis which convert data from 11i to 12
Regards
Vamshi

Installation error in Oracle Web Center 11.1.1.3.0

Hi,
I have downloaded the ofm_wc_generic_11.1.1.3.0 from OTN.
I installed the WLServer successfully. While trying to install Oracle Web Center 11.1.1.3.0 I am getting the below error.
Do I need to install Web Center Suite 11.1.1.2.0?
Is there any sequence to install?
Please help me.
INST-07010: Validation of Oracle Home location failed. The location specified does not exist.
Enter a valid existing directory
INST-07286: Specified Oracle Middleware home location does not have version 10.3.3 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.3.0 or upgrade the Weblogic server to 10.3.3.0 and restart the install.
INST-07100: The Oracle home provided does not contain Oracle WebCenter 11.1.1.2.0.
In order to patch your existing version please provide an Oracle home that contains the product mentioned above. If you choose to continue, only the oracle_common directory and any components that both products have in common will be patched.
INST-07293: Middleware home location specified does not have the required Oracle homes installed in it. The Oracle homes for the following components is not installed oracle.as.webcenter.top.
Provide a different Middleware home location or install the required Oracle Products and try the install again
Regards,
Venu--
Edited by: [email protected] on Sep 6, 2010 5:04 AM

Hi,
Thanks for reply.
I installed the latest WLServer from
http://download.oracle.com/otn/nt/middleware/11g/wls1033_oepe111150_win32.exe
Is this is the right one?
Regards,
Venu--

Oracle 9i R2 Installation on RH Linux 7.3 -- Have a few questions.

Hello,
I am at the end of the Oracle 9i R2 installation and have a few questions.
1) The "Agent Configuration Assistant" keeps failing. I get the following message.
Parameters "orahome" = /opt/oracle/product/9.2.0
Parameters "nodeinfo" = NODE_VALUE
Agent Service Failed
What does this mean and how can I complete Agent Configuration Assistant install?
2) I completed the Oracle Database Configuration Assistant successfully and created passwords for sys and sysoper (not sure if these were the exact users). Note I did not modify any other users or unlock them.
How do I log into the sqlplus prompt, what users should I use and how can I create new users and databases?
Thanks for your help in advance.
Regards,
Chris Barone
[email protected]

(1) You can probably just ignore the Agent Configuration (are you using the Agent to collect data?)
(2) sqlplus '/ as sysdba' will log you into the SQL*Plus prompt.
Rob

How to start EM in Oracle Web Center?

Please guide how to start EM in Oracle Web Center?
as i am not getting emctl file in BIN Directory of Oracle Web Center Home...
Please guide and help
Thanks,
Waheed.

Hi All,
I got the solution how to start EM in Webcenter .
If in your configuration is there any other HTTP server is running then its comfilect with your current Webcenter with HTTP server installation. so try to installed only Oracle Webcenter Freamwork only...after that try to open the Application server control page with 8888, it will definately work...

Install Oracle Email Server

Hi
I am trying to install Oracle Email Server in a e-Business Suite(LInux) environment.
My system:
E-Business Suite 11.5.0 is installed in Linux
Oracle Email Server 5.2.0 is installed in Windows 2000 Server
And on my network I have a Exchange Server
My first problem is that I can’t find any Windows sendmail to connect my Oracle email Server. I have found a sendmail “copy”( http://www.indigostar.com/sendmail.htm) but only use command line to send/receive emails.
And Second, how to connect my Oracle Email Server to my Exchange network? Only a smtp/pop connector between the two will do?
If anyone can help it would be great.
Tanks
JailBreak

Hi JailBreak!
I know that the 8.1.7 version of the database on Linux was not perfect.
The approach you took is somewhat valid but be aware that there are some issues (at least I hit them in my last project with HP-UX) where the combination of Oracle 9i with the ES 5.2.2 is tricky (need the patch libraries in the 9i tree and so on.
So my advise would be the following:
- Install an 8.1.7 software tree - build no db yet (you already did this)
- Install the ES 5.2 - do not run the imconfig yet
- Install the ES 5.2 Patchset 2
- Build a database
- Run the imconfig
- Configure sendmail
This will work! I did this so often I can guarantee you that this will work.
However be careful - the configuration of the EMail Center is very dificult and the documentation is somewhat vague about which values to fill in.
Try to have an english setup of the EMC as it makes life easier to compare the screens with the manuals.
cu
Andreas

Installing oracle ops center with a Customer-Managed Database.

Hi Everyone,
I am trying to install oracle ops center with a Customer-Managed Database.
I followed this document http://docs.oracle.com/cd/E27363_01/doc.121/e25139.pdf
but I fail.
this is the error I get
Executing job: jobs/40installOracle.pl --install --remoteDBprops=/var/tmp/RemoteDBProps.txt
40installOracle.pl Job Start = Wed Aug 6 11:16:25 2014
looking for props file: /mnt/xvmoc_full_bundle/./Linux_i686/Product/installer/scripts/localOracleConfig.propertieslooking for alter storage file: /mnt/xvmoc_full_bundle/./Linux_i686/Product/installer/scripts/alterStorage.sqlRestarting install at state=done_install_ic
Skipping Step:PrepOraDB because currentState=done_install_ic
Skipping Step:Install IC because currentState=done_install_ic
Error: Failed to get a database connection: Connection refused
satadm: ERROR: --- Failed to verify database
Cannot verify remote database
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.28153.
t. Try this step again (correct the failure before proceeding)
x. Exit
this is my RemoteDBProps.txt
mgmtdb_appuser=OPSCENTER
mgmtdb_password=xxxxxxxx
mgmtdb_roappuser=OPSCENTER_RO
mgmtdb_ropassword=xxxxxxx
mgmtdb_dburl=jdbc:oracle:thin:@192.168.1.100:1521/oem
I tested the connection to the sql using OPSCENTER and is working fine.
What am I doing wrong?
kind regards
Albert Boqo

Hi Albert,
which Version of remote DB do have installed ?
As the error indicates that the error say sqlpplus can't connect to it.
Is the Oracle listener running for port 1521 ?
Error: Failed to get a database connection: Connection refused
satadm: ERROR: --- Failed to verify database
example to verify the status:
/export/home/oracle/u01/app/oracle/product/11.2.0/db_1/bin/lsnrctl status
and what is ../oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
configured is these same port/hostname as in RemoteDBProps.txt
Regards
Klaus M

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Oracle 11g R2 Installation on Windows 7 (64 bit)

While installing, it is asking for Proxy Server. What should I enter?

I'm installing on laptop Oracle 11g R2 Installation on Windows 7 (64 bit) it was asking me to enter Proxy server details, since I'm not connecting internet with proxy I've skipped the step. But after that when reached the "System class" there was two radio buttons 1)Desktop Class - which selected default and clicked on Next button, then it disappeared. Looks like process was stopped. i have looked it in Windows Task manager it is not there.
Is any one know what is going on?
Thanks.

Oracle R Enterprise installation ERROR: cannot copy dll file

This is bit strange, I posted this message in 2 forums but surprisingly can't find it anymore!! Anyways, I would appreciate if anyone can help me a bit on this issue:
I am having trouble installing ORE 1.3 on my windows 7 (home premium, personal notebook) 64 bit. I strictly followed the installation note and made sure all the path variables are defined properly. My R version is 2.15.1. My Windows user is a member of ora_dba group as can be seen below.
C:\Users\sourabh>net localgroup ora_dba
Alias name        ora_dba
Comment         Oracle DBA Group
Members
NT AUTHORITY\SYSTEM
sourabh
The command completed successfully.Now when I try to install.bat (bare with me as I try to include the whole path as I believe there may be the problem. Note that my oracle and R installation is in H:\ drive, not in C:\. Can that be an issue about some windows permission? I off-course tried many ways, gave the user full permission, but no luck.)
C:Users\sourabh>H:\ORACLE\OracleREnterprise\ORE\ore-server-win-x86_64-1.3\server\install.bat
Oracle R Enterprise 1.3 Server Installation.
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Checking R ...................................
Pass
Checking R libraries ........................
Pass
Checking ORACLE_HOME ...............
Pass
Checking ORACLE_SID ..................
Pass
Checking sqlplus ...........................
Pass
Checking ORE ..............................
Pass
Current configuration
R_HOME            = H:\ORACLE\OracleREnterprise\R\R-2.15.1
R_LIBS_USER     = H:\ORACLE\Oracle11g\product\11.2.0\dbhome\R\library
ORACLE_HOME = H:\ORACLE\Oracle11g\product\11.2.0\dbhome
ORACLE_SID      = SINHA
Do you wish to install ORE? [yes]
Choosomg RQSIS tablespace
PERMANENT tablespace to use for RQSYS [SYSAUX]:
Using default SYSAUX
TEMPORARY tablespace to use for RQSYS [TEMP]:
Using default TEMP
Tablespace summary
PERMANENT tablespace = SYSAUX
TEMPORARY tablespace = TEMP
Installing libraries ..............
Fail
ERROR: cannot copy "rqe.dll" to "H:\ORACLE\Oracle11g\product\11.2.0\dbhome\bin"
C:Users\sourabh>Now here is the default group/user and permissions structures for C:\ and H:\ installation directories on my computer:
C:\program files :
        Group or user names                                    Permissions
        CREATOR OWNER                                          Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control
        Users (Win7\Users)                                     Read & execute, List folder contents, Read
        TrustedInstaller                                       List folder contents, Special Permissions
H:\%ORACLE_HOME% :
        Group or user names                                    Permissions
        Authenticated Users                                    Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control                Now noticed that there is no user called sourabh (Win7\Users) or Users (Win7\Users) on H:\, so I created and gave them "Full control" permission before running install script, but still no luck.... Any help please?
Thanks,
Sourabh

Hi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
    cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

Oracle Email Center Installation

Similar Messages

Maybe you are looking for