Oracle Ent Linux 5.3 GridControl 10/rel2 installer failure Xp.so.6 error

I tried some of the sus10 work arrounds but to no avail still get error.
So... apparently there is no way to install 10G grid on OELinux 5.3 until someone comes up wit another workaround
I am attempting to get to grid control/R4 but you have to start with /R2 full install
same errors before and after export
[oracle@localhost racinst]$ export libXp_HM=/usr/X11/lib
[oracle@localhost racinst]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, redhat-4 or SuSE-9
Passed
Checking for Kernel version 2.4.21 Passed
Checking for glibc version glibc-2.3.2-95.3 Passed
Checking swap space: must be greater than 150 MB. Actual 3770 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-14_11-30-22AM. Please wait ...[oracle@localhost racinst]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-14_11-30-22AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.emgc.oneclick.OneClickWizard.getGuiDefaults(OneClickWizard.java:239)
at oracle.sysman.emgc.oneclick.OneClickWizard.<init>(OneClickWizard.java:205)
at oracle.sysman.emgc.oneclick.OneClick.<init>(OneClick.java:230)
at oracle.sysman.emgc.oneclick.OneClickInstaller.<init>(OneClickInstaller.java:116)
at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:268)
at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:359)
at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:650)
at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:367)
[oracle@localhost racinst]$

Are u doing oms or agent install ? any way Install the package xorg-x11-deprecated-libs-6.8.2-1.EL.13.37.i386.rpm and then try

Similar Messages

GridControl 10/rel2 runInstaller failure Xp.so.6 error on OrEntLinux5.3

Oracle Linux 5.3 and 11g installed ok but when attempting to install R2 gridcontrol get the following error:
[oracle@localhost racinst]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, redhat-4 or SuSE-9
Passed
Checking for Kernel version 2.4.21 Passed
Checking for glibc version glibc-2.3.2-95.3 Passed
Checking swap space: must be greater than 150 MB. Actual 4031 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-14_11-27-41PM. Please wait ...[oracle@localhost racinst]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-14_11-27-41PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.emgc.oneclick.OneClickWizard.getGuiDefaults(OneClickWizard.java:239)
at oracle.sysman.emgc.oneclick.OneClickWizard.<init>(OneClickWizard.java:205)
at oracle.sysman.emgc.oneclick.OneClick.<init>(OneClick.java:230)
at oracle.sysman.emgc.oneclick.OneClickInstaller.<init>(OneClickInstaller.java:116)
at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:268)
at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:359)
at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:650)
at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:367)
[oracle@localhost racinst]$

found the correct lib

Oracle ENT Linux Install ??

I downloaded 64bit linux from oracle about 8cds. During the installation it ask for cd 2 and when put cd 2 getting error saying not a linux CDROM.
I validated the media disc 2 with the linux utility it came with.
Has anyone seen this issue.??

Hi,
It's seems like your CD have some problem on the file .discinfo.you can mount the cd and check on the file with other CD and there should be just only one difference that the CD's number between the content of .dicinfo on different CD.
You can re-download this ISO from oracle ULN and re-burn this CD.
Best Regards
terry

11g on Oracle Ent Linux ./runInstaller fails: Error: can't open display:...

X-server stuff is killing me...
As root:
[root@blackbox ~]# xclock
the xclock starts right up.
[root@blackbox ~]# su - oracle
[oracle@blackbox ~]$ /usr/bin/xclock
xclock DOES NOT start. Permissions are fine and command just sits there until Ctl-C to abort.
[oracle@blackbox ~]$ hostname
blackbox
[oracle@blackbox ~]$ echo $DISPLAY
blackbox:0.0
[oracle@blackbox ~]$./runInstaller
...some checks are done and passed
...>>>Could not execute auto check for display colors using command /usr/bin/xdpinfo. Check id the DISPLAY variable is set...
Continue? yes
Can't connect to the X11 window server using blackbox:0.0...
...OUI-10027: To enable clent users to access the X server, ...# xhost +
etc., etc.
I tried all the checks suggested in the message including setting the DISPLAY to:
DISPLAY=192.168.1.110:0.0; export DISPLAY (shell is bash)
I seems that as the oracle user I cannont connect to the Xserver? Not sure how to check other than testing w/ something like xclock.
Any assistance much appreciated.

...ok...I still don't understand what the difference is from before. But, as you suggest...
(btw, the error message ">>> Could not execute auto check..." seems erroneous to me in that I'm running the KDE desktop just fine???)
[root@blackbox ~]#
[oracle@blackbox database]$ echo $SHELL
/bin/bash
[oracle@blackbox database]$
[root@blackbox ~]# DISPLAY=:0.0
[root@blackbox ~]# export DISPLAY
[root@blackbox ~]# echo $DISPLAY
:0.0
[root@blackbox ~]# su - oracle
[oracle@blackbox ~]$ cd /tmp/database/
[oracle@blackbox database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 13706 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1791 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n] y
Rechecking installer requirements....
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-07_04-14-47PM. Please wait ...[oracle@blackbox database]$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Can't connect to X11 window server using '192.168.1.110:0.0' as the value of the DISPLAY variable.
192.168.1.110:0.0
192.168.1.110:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '192.168.1.110:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
--------------------------------

Oracle Ent Linux 5.3 ASM install Ok then Demon fails looking for odd lib

after installed correct libraries for 32 bit 5.e OELinux on a quad core core 2 duo I get the following error
when trying to manually load ocssd.bin deamon
this lib is not available on net and seems very rare.
root@localhost /# /app/oracle/product/11.1.0/db_1/bin/ocssd.bin
/app/oracle/product/11.1.0/db_1/bin/ocssd.bin: error while loading shared libraries: libhasgen11.so: cannot open shared object file: No such file or directory
I have already installed a 11g database on this machine then added asm packages.
oracleasm-2.6.18-128.1.1.el5-2.0.5-1.el5.i686
oracleasmlib-2.0.3-1.el5.i386
oracleasm-support-2.1.2-1.el5.i386

I haven't to install anything on my RHEL 5.3 to get ASM workng, oly on RHEL 4.x.
Just have to install package pre-reqs for Oracle RDBMS.
As RHEL is almost the same as OEL, you can trry to uninstall these manually added libraries.
These are the packages required:
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3 (32 bit)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
gcc-4.1.1
gcc-c++-4.1.1
glibc-2.5-12
glibc-2.5-12 (32 bit)
glibc-common-2.5
glibc-devel-2.5
glibc-devel-2.5-12 (32 bit)
libaio-0.3.106
libaio-0.3.106 (32 bit)
libaio-devel-0.3.106
libgcc-4.1.1
libgcc-4.1.1 (32 bit)
libstdc++-4.1.1
libstdc++-4.1.1 (32 bit)
libstdc++-devel 4.1.1
make-3.81
sysstat-7.0.0

Oracle Ent Linux after installation

I installed OEL 5.0 and after all installation is finised and Rebooted the machine its turn off automatically and said OUT OF RANGE ... i Think is an error with the video and before intall I Typed : linux resolution=1024x768
but still getting the same error ...
thx

The out of range error usually means your monitor can not display the video modus the card has set.
In order to resolve, press CTRL+ALT and while holding press F1. That should give you a character based login.
Login as root, and go to /etc/X11 (cd /etc/X11)
Now edit xorg.conf (vi xorg.conf)
Go to: Section "Screen" and look for SubSection "Display"
If not already present, add or modify the line(s) with: Modes, and only list "1024x768" there.
Another possiblity, which also can be checked in the xorg.conf file, is the horizontal and vertical refresh rate, look for the words "HorizSync" and "Vertrefresh", and check and change the rates for your monitor (the refresh rates can be found on the internet and/or in the booklet you've gotten with your monitor)

11g on Oracle Ent Linux ./runInstaller Pop is not displayed...

I am having a very weird error...While installing the CRS my OUI does not show the popup where I can add 2nd node info. Just a grey screen.
I have XCLOCK running... Any help is greatly appreciated.
Thanks,
Paru

What of these method are you using?
1. export DISPLAY=localhost:10.0 or export DISPLAY=127.0.0.1:10.0
OR
2. export DISPLAY=<remote_hostname>:0.0 or export DISPLAY=<remote_IP>:0.0

Oracle Enterprise Linux Release 5 installation on DELL Studio 15

Hi All,
Please let me know if any done Oracle Enterprise Linux Release 4 or 5 version installation on Dell Studio 15 or any New laptop of any company.Planing to install oracle application on new laptop of any company.
Thank You Advance.
Bestregards,
Venkat.

Hi Venkat,
No, Some of the laptops are not allowing to install linux.Not detecting the HDD and LAN drivers.This is an OS issue (NOT an Oracle E-Business Suite issue).
Regards,
Hussein

Oracle Ent. Linux drivers for HP Smart Array B110i Sata Raid Controller

Trying to install Oracle Ent. Linux (OEL) release 4 update 8 on HP DL 180 G6 server. Where we can find OEL drivers for the sata raid controller ?
(HP Smart Array B110i Sata Raid Controller)
Thanks in advance.

The HP support side shows a Linux certification matrix at: http://h18000.www1.hp.com/products/servers/linux/hplinuxcert.html
From there you can also download the necessary drivers and instructions or use HP smartstart CD which prepares the system for the OS you need to install. Oracle Enterprise Linux is binary compatible with RHEL. You will need to click on "Archive" to see support for Enterprise Linux version 4 and older.
Also interesting should be Red Hat Enterprise Linux Technical Exceptions at
http://h18000.www1.hp.com/products/servers/linux/supportmatrix/rhel/exceptions/rhel-exceptions.html

Installation of Oracle Failed on Oracle Enterprise Linux.

Hi All,
I have installed Enterprise Linux Release 5 Update 2 for x86 (32 Bit) provided by oracle e-delivery on my Vmware Virtaul machine.When i try to install Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86,after running the runInstaller i am getting the following error.
[oracle@vmware database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Note:Oracle E-Delivery has provided 5 CD's to downlaod for Enterprise Linux Release 5 Update 2 for x86 (32 Bit).But the installation of LINUX finished succesfully with 3 CD's only.I donot have any idea for what purpose the remaining CD's 4 and 5.Do i need to install CD's 4 and 5 seperately.Is this the problem for orcle DB installation failure or is there any exclusive database which i need download for Enterprise Linux Release 5 Update 2 for x86 (32 Bit).
Any help in this issue is highly appreciated.
Thank You Very Much.

I am also getting the same error as a previous poster:
>>>
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-02_04-31-29PM. Please wait ...[ora10@el5a database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-02_04-31-29PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
<<<
I downloaded and installed Oracle EL5 (64 bit). I have a Network-level support, so I ran the up2date and picked up all the updates and installed them. My company is a licensee of 10g, so I downloaded 64bit 10g, and ungzip-uncpio'd it into a work directory. When I try to install it, it blows up at the above point.
In reading the above comments, I rpm'd libXp and libaio, but this does not change the failure of runInstaller.
Any hints?
--Ewin

Problems dual booting Windows Vista with Oracle Enterprise Linux 4

I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
Initializing hardware....Storage network"
It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

hi,
r u getting this error while installing oel or after installation?
which version of oel u r installing?
u may get this error probably due to hard disk (usually sata) compatility with linux.
--Regards
Xaheer

Question regarding Oracle and Linux on VMware

Hello,
I carefuly read the paper on Oracle and Linux on Your Own VMware and I'm missing a point.
The paper explains how to start a cluster on a single host in a single Linux VM on VMware.
So, there are 2 instances of Oracle 10g DB on the same Linux VM inside VMware. What does allow that?
Is it possible to run 2 instances on any (single) Linux box, or is VMware required? If VMware is not required, why this complication in that paper? If VMware is required, what does it bring that make running 2 cluster instances on the same host possible?
Many thanks for your help.

userLynx wrote:
I have an oracle database (10.2) and I have a query that needs to compare data on the Oracle database to data on a MS SQL server DB. I'm using a DB Link between the two databases.
How would I compare the date fields?
I have a table that has a date as one of the fields and I need to restrict the records where the date is equal to the date on SQL, however the formats are different:
My query is as follows:
SELECT mkt_css_name,
pmv_rqst_corp_id,
pmv_rqst_source,
'G',
pmv_css_acct_no,
eq.start_date
FROM power_move@cmdt,
enroll_que@tcis eq,
marketer@cmdt
WHERE eq.css_account_number = pmv_css_acct_no
AND eq.requestor_type = 'P'
AND eq.status IN ('A','P','G','S')
AND eq.marketer_id = mkt_seq_no
AND pmv_service_type IN ('G','D')
And Pmv_Gas_Mktr_No = Eq.Marketer_Id
AND pmv_received_timestamp= eq.enroll_date ;
The problem is that the date is stored in Oracle in the following format: DD-MON-YYYY and in SQL as 'YYYY-DD-MM HH:MI:SSSSSS'
for example: Data in Oracle would be 27-JAN-2012 and in SQL as 2012-01-27 00:00:00.000
I get an error when I compile.
How do you reconcile the formats when the syntax is different between databases?
Thanks, SeanDATE datatypes do NOT have any "format"
DATE datatype is stored in internal binary notation.
use TO_CHAR to display, present & compare the DATE datatypes

Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2

Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+     libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+     libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+     libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+     yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+     yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+     yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Roger

error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies.

Unable to auto start database/listener/EM on Oracle Enterprise Linux 5

All Experts
I have install oracle 11g on Oracle Enterprize Linux 5 successfully.
done all post installating steps, but when i restart server oracle listener/database/EM not automatically start.
Please guide what is wron (server dbora error: /bin/sh: :No such file or directory).
1. Log in as the root user
2. Edit the oratab file (SID=Y)
3. Create a file called dbora
4.Run chmod and chgrp on the dbor file
# chgrp dba dbora
# chmod 750 dbora
6.Creat symbolic links to the dbora script
# ln -s /etc/init.d/dbora /etc/rc.d/rc0.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
7. add service
# chkconfig --add dbora
# chkconfig –list dbora
0:off 1:off 2:off 3:on 4:off 5:on 6:off
# ls -l /etc/rc*.d/*dbora
# !/bin/sh -X
# chkconfig: 35 99 10
# description: Start and stop the Oracle database, listener, EM, and iSQLPlus
# Change the value of ORACLE_HOMe to specify the correct Oracle Home Firectory for your installation.
# Change the value of ORACLE to the login name of the oracle owner at your site
ORACLE_HOME=/oradisk/app/oracle/product/11.1.0/db
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
HOST="hostname"
PLATFORM="uname"
export ORACLE_HOME PATH
if [ ! -f $ORACLE_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case $1 in
'start')
su - $ORACLE -c "$ORACLE_HOME/bin/dbstart $ORACLE_HOME"
'stop')
su - $ORACLE -c "$ORACLE_HOME/bin/dbshut $ORACLE_HOME"
echo "usage: $0 {start|stop}"
exit
esac
exit

does the script work when you log on to your freshly started system, logon as root and execute /etc/init.d/dbora start?
the script does not have to have group membership of the dba group.
also, do not create symlinks yourself.
by adding the service using chkconfig the script is started and stopped as indicated by chkconfig --list, no need to do additional steps like creating symlinks.

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Oracle Ent Linux 5.3 GridControl 10/rel2 installer failure Xp.so.6 error

Similar Messages

Maybe you are looking for