Oracle error ORA-01461when trying to insert into an ORACLE BLOB field

I am getting Oracle error ‘ORA-01461: can bind a LONG value only for insert into a LONG column' when trying to insert into an ORACLE BLOB field. The error occurs when trying to insert a large BLOB (JPG), but does not occur when inserting a small (<1K) picture BLOB.(JPG). Any ideas?
BTW, when using a SQL Server datasource using the same code.... everything works with no problems.
ORACLE version is 11.2.0.1
The ORACLE datasource is JDBC using Oracle's JDBC driver ojdbc6.jar v11.2.0.1 (I also have tried ojdbc5.jar v11.2.0.1; ojdbc5.jar v11.2.0.4; and ojdbc6.jar v11.2.0.4 with the same error result.)
Here is my code:
<cfset file_mime = Lcase(Right(postedXMLRoot.objname.XmlText, 3))>
<cfif file_mime EQ 'jpg'><cfset file_mime = 'jpeg'></cfif>
<cfset file_mime = 'data:image/' & file_mime & ';base64,'>
<cfset image64 = ImageReadBase64("#file_mime##postedXMLRoot.objbase64.XmlText#")>
<cfset ramfile = "ram://" & postedXMLRoot.objname.XmlText>
<cfimage action="write" source="#image64#" destination="#ramfile#" overwrite="true">
<cffile action="readbinary" file="#ramfile#" variable="image_bin">
<cffile action="delete" file="#ramfile#">
<cfquery name="InsertImage" datasource="#datasource#">
INSERT INTO test_images
image_blob
SELECT
<cfqueryparam value="#image_bin#" cfsqltype="CF_SQL_BLOB">
FROM dual
</cfquery>

Can't you use "alter index <shema.spatial_index_name> rebuild ONLINE" ? Thanks. I could switch to "rebuild ONLINE" and see if that helps. Are there any potential adverse effects going forward, e.g. significantly longer rebuild than not using the ONLINE keyword, etc? Also wondering if spatial index operations (index type = DOMAIN) obey all the typical things you'd expect with "regular" indexes, e.g. B-TREE, etc.

Similar Messages

Sandee mendelson reid : Oracle Error: ORA-01403

Hi everyone!!!
Please could you tell me why I get an error (ORA-01403: No data found) when executing a sql query on Oracle 8i?
The query is:
"INSERT INTO TABLE1 SELECT * FROM TABLE2"
NB:
when I run the query "SELECT * FROM TABLE2"
I get property registration!
it is at the time of insertion of recording in Table 1 that the error occurs:
ORA-01403: No data found
thank you in advance for your help
Sandee mendelson reid

Even on your really old version of Oracle, the insert select should not raise a no data found error. Is that the full error stack you get? Typically that error comes in a PL/SQL block where you are selecting a value into a variable. I would expect the full error stack would also include the name of the PL/SQL unit where the error occurred. Is ther a trigger defined on table1?
John

JQuery UI Widget trying to insert into DW

Hello, I have just been trying for a long time to insert a new (jQuery) "tabs" widget into my DW CS6 via the import widget button, but DW will absolutely not let me.
THE ERROR MESSAGE BELOW IN THE WIDGET BROWSER:
There was an error importing the widget:
The file:///C:/Users/sara/Desktop/jquery-ui-1.11.0.custom.zip could not be unzipped. Make sure that this file is a valid Open Ajax Widget packaged by the Adobe Dreamweaver Widget Browser
Last year before all the updates (in CS6) I was able to insert a tabs widget from jQuery just fine, but now, so many problems!. When I select the widget .zip file to load I get the above error and after reading others messages i'm pretty sure its not jQuery, but DW who have disabled things to try and make me upgrade to CC. If this is the case how can I back roll to previous updates of dreamweaver?
@I am using http://jqueryui.com/themeroller/ and have made a custom themed Tabs widget
Is there another way round this, i.e can I drop the .zip file wherever the widgets folder is location etc or has anyone found another way around the DW restrictions?
thanks
Sara

Hi Nancy, if Adobe has completely pulled the plug on the widget browser, then how do I now insert / load the widgets from the jQuery website? - I tried for a day, but cannot find a way.
The direct link you gave is what I am already trying to insert into DW (see my original message), to insert the tabs from jquery, you have to go to the theme roller to download it. (.zip file). How do I now get it on my .PHP page without the load widget that DW has disabled?
I have paid a lot of money for this software and really don't think its fair that an update can disable important things like this without warning. Is there somewhere where I can maybe download the widget installer, i.e the one I already paid for when I bought CS6 DW?

Oracle Error :: ORA-12637 Packet receive failed

Hi buddies,
One of my staff's PC is receiving this error sometimes when she is trying to connect to the database and she is able to connect sometimes.
Oracle Error :: ORA-12637 Packet receive failed What could be the cause.
I tried replacing her tnsadmin with my tnsadmin and it didn't make a change, still able to connnect sometimes and sometimes not.
Able to connect using PL/SQL developer, but not using our customized application. (Everyone else are able to connect)
Is it network problem?
Please advice.
Thank You very much.
Alagu
Edited by: user645399 on Sep 16, 2009 8:37 PM

And from this cut-and-paste the OP is supposed to take what actions to solve the problem? Please don't just post that which is one google away every time someone posts an ORA- exception. You make some valuable contributions here but just posting expanded text doesn't give someone a list of actions to take that will help them resolve the issue. Better the question is left unanswered so others will be more likely to offer help.
To the OP:
It is highly likely you have a network issue and the fact that it is isolated to a single machine makes it reasonably easy to fix. First try to figure out which component is failing. Go to the router or switch and swap wires between that client machine and another one that is working properly. Does the problem move? If not then swap the wires. Again does the problem move? Next the NIC card? What if you put another machine on the desk and put the original hard disk in it?
Sometimes it just isn't worth the effort so you just swap out the machine.
Intermittent problems are always hard to identify and fix. What is on your side is that this is only affecting a single user.

Urgent-Oracle Error :: ORA-39778-

Hi
I got following Oracle Error : ORA-39778 "the parallel load option is not allowed when loading lob columns" on production. yesterday we updated database with patchset 9.2.0.7 and DST/JVM compliant.
Please reply me ASAP.
Regards,
RJ

Sry I didn't check back this afternoon.
As posted,
Here's the note from metalink doc Note:396387.1
Then e this to apply the files manually in the following way:
Download the identified patch.
Unzip the patch, and locate the 2 files timezone.dat and timezlrg.dat in the "files/oracore/zoneinfo" directory of the uncompressed patch (or from the relevant .jar file of a patchset). If there is also a readme.txt in this location then make a note of this as well.
Backup your existing files in $ORACLE_HOME/oracore/zoneinfo - THIS CAN BE VITAL, DO NOT SKIP.
Copy the 2 .dat files and possibly the readme.txt file that were found in step 2 into the $ORACLE_HOME/oracore/zoneinfo directory.
Restart the database (in case of installation on a database), or restart the client applications (in case of client install). Note that the database did not need to be down before the time zone files were applied, but it does need to be restarted afterwards.

Oracle error ORA-22905: cannot access rows from a non-nested table item

Oracle error ORA-22905: cannot access rows from a non-nested table item
Creating a report using oracle plsql code .
Getting error ;
Oracle error ORA-22905: cannot access rows from a non-nested table item
when I am trying to pass data in clause in pl sql proc
basically I have a proc which takes 2 parameters(a and b)
proc (
P_a varchar2,
p_b varchar2,
OUT SYS_REFCURSOR
culprit code which is giving me the error and on google they say cast it but I dont know how to do it in my context
--where id in (
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
--        union
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
data sample returned from this :SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
'Abc','def',
data sample returned from this;SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
'fgd','fth',
Any answers ?
How to pass data in clause in a better way

Why are you creating a duplicate post? I already asked you to post p_cd_common.get_table_from_string. In particular what is function return type and where it is declared. As I already mentioned, most likely function return type is declared in the package and therefore is PL/SQL type. And TABLE operator can only work with SQL types.
SY.

I get an error message when trying to sign into the support community with another Apple id. On the pick a username screen I get "an account utilizing this address already exists...." despite trying a few usernames. Anyone know how I can resolve this?

I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?

This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful.

Using PreparedStatement and the Oracle Error ORA-1000

Hi,
I have a question about PreparedStatement objects that is not so simple to explain for me. What I would like to know is: if I use a PreparedStatement following traditional and generic steps:
1- PreparedStatement pStmt = Connection.prepareStatement(sQuery);
2- pStmt.setXXX(i,j);
n - pStmt.setXXX(i,j);
n+1 - ResultSet rs = pStmt.executeQuery();
n+2 - while(rs.next()){ ... retrive ResultSet data ... }
n+3 - rs.close()
n+4 - back to point number 2
and at the end (as you can see in the point numbered n+4), instead of closing the PreparedStatement pStmt using the close() method, I reuse the PreparedStatement pStmt comeing back to the point numebr 2 and setting again all its parameters with new values ... then ... what heppens in the Oracle database ? Has been the cursor (so the mamory area), associated to my PreparedStatement object pStmt, duplicated or is it the same ?
I know that Java allows you to do this kind of operations with PreparedStatement, and I know that in tha Java Documentation is explained to follow this strategy to optimize the execution time because in this way the same PreparedStatement is precompiled and prepared only once. But if I do a for loop following the steps explained before, after many iterations I have the error "ORA-1000: maximum open cursors exceeded". This error is the reason of my question. Does this error means that it's mandatory to close a PreparedStatement always, otherwise if you reuse it without closing it then the corresponding database cursor will be duplicated ? If it is so, then I think this is a contradiction with official java documentation ...
I'm using Oracle8i (version 8.1.7) and Oracle JDBC Thin Driver (Windows NT) for use with JDK 1.2.x. Moreover, in my database istance the parameter "maximum open cursor" is equal to 800 ...
Thank you very much for suggestions :-)

There is no need to close a prepared statement or its resultset for every iteration.
After the first iteration in a loop, all subsequent executions of it will close the previous resultset. By adding close() method, you are making one extra costly call to the DB for no reason.
Following is the sample code.I know what you are saying. In fact at the beginning I wrote my code in the same way of your sample (see the code of my first post at the begin of this page).
But doing so, after thousand iterations of the loop, I had "Oracle Error ORA-1000 : maximun open cursor exeeded" even if in my database istance the parameter "maximum open cursor" is equal to 8000.
At this moment in my code, for each iteration, I close the PreparedStatement and in this way I don't have anymore the error :-((
So it seems that only in theory we can reuse a preparedStatement without closing it. In fact if we see the oracle system table "$open_cursor" (as Konrad Pietzka suggest me) we can find that, for each interation,
at our line code "rs = pstmt.executeQuery();" correspond a new cursor in the database: this means that for each method "pstmt.executeQuery()" the database open a new cursor and do not use the previous one as it should.
I posted a question two months ago to search if someone had the same problem (it seems that Konrad Pietzka had the same situation) and was able to explain me what is the cause.
The only reason I found by myself for this problem, is that probably the Oracle JDBC Thin Driver for Windows NT/2000 has some bugs... but I'm not sure ...
Thank you very much for you time !!
bye :-))
Fidalma

Oracle 10g performance degrades while concurrent inserts into a table

Hello Team,
I am trying to insert into single table via multiple threads, Some of these threads perform reasonably well but some will take really longer time, As the time goes on performance drastically degrades (even down by 500 to 600 times). With AWR report i see that there quite huge number of buffer gets there. I am not sure how can i reduce those. If i ran on a single thread this operation is consistent.
I tried quite a few options like
1. Increasing SGA Memory
2. Moving redo logs to another disk drive.
3. Trying it on a empty table
4. Trying it on a table which has huge data (4 Million rows)
5. I have even tried partitioning the table with HASH algoritm
Note: Each thread i am pupming equal amount of data (let say 25K rows).
Can any body suggest me a clue what could be the culprit here.
Thanks in Advance
Satish Kumar Ballepu

user11150696 wrote:
Can you please guide me how do i do that, I am not aware of how to generate explain plan for that query.Since you have the trace file already (and I don't mean the tkprof output), you could do the following:
Read the trace file to find the statement you're interested id - the line above it will be a +"PARSING"+ line, and will include a reference to the statement hash_value look like +'hv=3838377475845'+.
Use the hash_value to query v$sql to get the sql_id and child_number;
Use the sql_id and child number in a call to dbms_xplan.display_cursor:
PARSING IN CURSOR #7 len=68 dep=0 uid=55 oct=3 lid=55 tim=448839952404 *hv=3413100263* ad='2f6ede48'
select ... etc. (the statement I want the plan for)
SQL> select sql_id , child_number from v$sql where hash_value = *3413100263*;
SQL_ID        CHILD_NUMBER
053tyaz5qzjr7            0
SQL> select * from table(dbms_xplan.display_cursor(*'053tyaz5qzjr7'*,*0*));
PLAN_TABLE_OUTPUT
SQL_ID 053tyaz5qzjr7, child number 0
select /*+ use_concat */ small_vc from t1 where n1 = 1 or n2 = 2
Plan hash value: 82564388
| Id | Operation                    | Name | Rows | Bytes | Cost |
|   0 | SELECT STATEMENT             |       |       |       |     4 |
|   1 | CONCATENATION               |       |       |       |       |
|   2 |   TABLE ACCESS BY INDEX ROWID| T1    |    10 |   190 |     2 |
|* 3 |    INDEX RANGE SCAN          | T1_N2 |    10 |       |     1 |
|* 4 |   TABLE ACCESS BY INDEX ROWID| T1    |    10 |   190 |     2 |
|* 5 |    INDEX RANGE SCAN          | T1_N1 |    10 |       |     1 |
Predicate Information (identified by operation id):
   3 - access("N2"=2)
   4 - filter(LNNVL("N2"=2))
   5 - access("N1"=1)
Note
   - cpu costing is off (consider enabling it)Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
"For every expert there is an equal and opposite expert."
Arthur C. Clarke
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.

TS1424 i'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

I'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNM

We have Upgraded DB from 10.2.0.2 to 10.2.0.5 having same Apps version 11.5.10.2,
we have seen below issue upon upgrade,
While updating any information in Assignment i.e. Assignment Status getting following error.
APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNMENTS_F
How to overcome these errors, please advise,
RM

Please see these docs.
PERWSHRG: Updating Assignment Gives Error APP-DT-34605 ORA-6510 [ID 286294.1]
Update Employee Assignment Details Cause Error: APP-DT-34605-- ORA-20001 occurred writing to PER_ALL_ASSIGNMENTS_F [ID 793451.1]
APP-DT-34605 Error When Saving on Assignment Form [ID 829292.1]
Receive APP-DT-34605 Error When Updating an Existing Payment Method [ID 780090.1]
ORA-06508 PL/SQL Could Not Find Program Unit Being Called: "APPS.PAY_PAY_SHD" [ID 1170903.1]
Thanks,
Hussein

ORA-00604 error when trying to insert into a XMLTYPE stored as BINARY

Hi. Here's the scenario.
Here's my Oracle version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
The database is encoded as AL32UTF8.
First I create the table...
create table binary_table (the_field XMLTYPE) XMLTYPE COLUMN the_field STORE AS BINARY XML;
Now I try and do an insert like this...
insert into binary_table values (xmltype('<?xml version="1.0" encoding="AL32UTF8"?>' || chr(10) || '<a>b</a>' || chr(10)));
and I get this error:
SQLState: 60000
ErrorCode: 604
Position: 122
Error: ORA-00604: error occurred at recursive SQL level 1
ORA-00942: table or view does not exist
If I create the table with a CLOB storage option for the XMLTYPE, the insert works fine. If I repeat these steps in another database instance, same Oracle version, that's encoded as WE8ISO8859P1, it also works fine. It behaves the same in several clients. I also tried it with several different values for NLS_LANG and that didn't help.
I do want to say that this database instance has just been set up especially for me so I can do some R&D on AL32UTF8 and XMLTYPE to see if it fits our needs. So it might be a problem with the database instance.
Thanks for taking a look at this.
Ralph
Edited by: stryder100 on Jul 24, 2009 12:11 PM

Hi,
Use this
Load data
append Into TABLE HS_HRMIG_EMP_PER_20MAR07 fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS.
Here optional enclosed by is for doubles quotes which should needs to place in single quotes.
like '"'.
try with this.
--Basava.S

RE:ora-28500 when trying to insert into SQL Server table

Hi all!
I'm getting this when i attempt to insert into my table test in a SQL Server database. As u can see from the select, the database link seems ok. Any ideas plz. Thnx..
SQL> select "idAges" from test@try2;
no rows selected
SQL> insert into test@try2 ("idAges","nARAges","nAPAges") values(10,'','');
insert into test@try2 ("idAges","nARAges","nAPAges") values(10,'','')
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver][SQL
Server]Cannot insert explicit value for identity column in table 'test' when
IDENTITY_INSERT is set to OFF. (SQL State: 23000; SQL Code: 544)
ORA-02063: preceding 2 lines from TRY2

IDENTITY_INSERT on works only for particular session and for one table. It's not global variable.
The only idea what I have is to create link from MS Sql to Oracle (right now You have oracle ->ms sql)and then before insert You will set identity_insert on and will run insert.

ORA-01008 - not all variable bounfd when trying to insert into trigger

Hi,
Uisng Oraclle 11.2.0.3 and trying insert into table on remote schema.
Tracked problem down to one column - the parent_num..
Offending code
a.mult_parent_num = ( select   nvl(MGrp_num, 0)
                            from     [email protected]
                            --where   MGrp_PARENT_num is not null
                            --and
                            where substr(upper(MGrp_DESCRIPTION), 2) = (select MULT_NAME
                                                               from por_multiple p
                                                               where p.mult_link_multiple_code = B.MULT_LINK_MULTIPLE_num)Complete truigger
create or replace trigger POR_TRG_POP_IKNOW_MULTIPLE
after INSERT OR UPDATE or delete   on por_MULTIPLE
for each row
-- tO ENSURE I-KNOW KEPT UP-TO-DATE WITH HOMIS MULTIPLE
-- delib not delet form i-know as if has been used by customer cannot delete
-- due to referential inetgrity constraints in i-know
declare
begin
-- ensure if updating record one of attributes interested in for ho_issues_stg changed
   IF INSERTING OR UPDATING
   THEN
      MERGE INTO [email protected] a
      USING
       select
       :NEW.MULT_ANMW_MULTIPLE_CODE MULT_ANMW_MULTIPLE_CODE,
       :new.MULT_AUTH_REQUIRED MULT_AUTH_REQUIRED,
       :new.MULT_JMW_MULTIPLE_TYPE_CODE MULT_JMW_MULTIPLE_TYPE_CODE,
       :new.MULT_LINK_MULTIPLE_CODE MULT_LINK_MULTIPLE_num,
       :new.MULT_MULTIPLE_CODE MULT_MULTIPLE_NUM,
       :new.MULT_NAME MULT_NAME,
       :new.MULT_PROM_AUTH_REQUIRED MULT_PROM_AUTH_REQUIRED,
       :new.MULT_SELECTED_MULTIPLE MULT_SELECTED_MULTIPLE,
           'Y' MULT_active_flag,
       nvl(:new.MULT_JMW_MULTIPLE_TYPE_CODE, 0) MULT_CHANNEL_NUM--,
      -- :new.MULT_LINK_MULTIPLE_CODE MULT_PARENT_NUM
       from dual
       ) b
    on
       a.mult_multiple_NUM = b.MULT_MULTIPLE_NUM
when matched THEN update set
       A.MULT_ANMW_MULTIPLE_CODE = B.MULT_ANMW_MULTIPLE_CODE ,
       A.MULT_AUTH_REQUIRED = B.MULT_AUTH_REQUIRED,
       A.MULT_JMW_MULTIPLE_TYPE_CODE = B.MULT_JMW_MULTIPLE_TYPE_CODE ,
       A.MULT_LINK_MULTIPLE_num = B.MULT_LINK_MULTIPLE_num,
       A.MULT_NAME =B.MULT_NAME,
       A.MULT_PROM_AUTH_REQUIRED=B.MULT_PROM_AUTH_REQUIRED,
       A.MULT_SELECTED_MULTIPLe=B.MULT_SELECTED_MULTIPLE,
           A.MULT_ACTIVE_FLAG = B.MULT_ACTIVE_FLAG,
       A.MULT_CHANNEL_NUM= B.MULT_CHANNEL_NUM
       a.mult_parent_num = ( select   nvl(MGrp_num, 0)
                            from     [email protected]
                            --where   MGrp_PARENT_num is not null
                            --and
                            where substr(upper(MGrp_DESCRIPTION), 2) = (select MULT_NAME
                                                               from por_multiple p
                                                               where p.mult_link_multiple_code = B.MULT_LINK_MULTIPLE_num)
when not matched
then insert
A.MULT_ANMW_MULTIPLE_CODE,
       A.MULT_AUTH_REQUIRED,
       A.MULT_JMW_MULTIPLE_TYPE_CODE,
       A.MULT_LINK_MULTIPLE_NUM,
       A.MULT_MULTIPLE_NUM,
       A.MULT_NAME,
       a.MULT_PROM_AUTH_REQUIRED,
       a.MULT_SELECTED_MULTIPLE,
       -- NEW FIELDS ON I-KNOW
       a.MULT_ACTIVE_FLAG,
        a.MULT_CHANNEL_NUM,
         a.MULT_PARENT_NUM
values
       b.MULT_ANMW_MULTIPLE_CODE,
       b.MULT_AUTH_REQUIRED,
       b.MULT_JMW_MULTIPLE_TYPE_CODE,
       b.MULT_LINK_MULTIPLE_NUM,
       b.MULT_MULTIPLE_NUM,
       b.MULT_NAME,
       b.MULT_PROM_AUTH_REQUIRED,
       b.MULT_SELECTED_MULTIPLE,
       -- NEW FIELDS ON I-KNOW
       b.MULT_ACTIVE_FLAG,
        b.MULT_CHANNEL_NUM,
     --   711-- parent to have parent_num group name of link multiple code
       ( select   nvl(MGrp_num, 0)
          from      [email protected]
                 --where   MGrp_PARENT_num is not null
                 --and
                   where   substr(upper(MGrp_DESCRIPTION), 2) = (select MULT_NAME
                                                               from por_multiple p
                                                               where p.mult_link_multiple_code = B.MULT_LINK_MULTIPLE_num)
update   [email protected]
set
MULT_PARENT_num =   ( select   nvl(MGrp_num, 0)
          from     bidsaMULTIPLE_GROUPS
                 where   MGrp_PARENT_num is not null
                 and     substr(upper(MGrp_DESCRIPTION), 2) = MULT_NAME
      MULT_CHANNEL_num = nvl(MULT_JMW_MULTIPLE_TYPE_CODE, 0),
      MULT_ACTIVE_FLAG = 'Y'
where
MULT_PARENT_num is null;
else
     update [email protected] p
     set mult_active_flag = 'N'
     where p.mult_multiple_num = :old.mult_multiple_code;
END IF;
EXCEPTION
     WHEN OTHERS THEN
        RAISE_APPLICATION_ERROR(-20010,'Error when writing to i-know multiple '||SQLERRM||' '||SQLCODE);
END POR_TRG_POP_IKNOW_MULTIPLE;What am I doing wrong?

Definitions bleow.
Performanve fine - source table rarelyy changed - a temporary solution until the source system replaced with desination system.
Error:
Error when writing to multiple (sourec table) ORA-01008 - not all variables bound ORA-02063 - preceding line form bisapprd.
- 1008 error during execution of trigger
Source table upon which trigger acting
-- Create table
create table POR_MULTIPLE
mult_multiple_code          NUMBER(4) not null,
mult_name                   VARCHAR2(20) not null,
mult_selected_multiple      VARCHAR2(1) not null,
mult_anmw_multiple_code     VARCHAR2(3),
mult_link_multiple_code     NUMBER(4),
mult_jmw_multiple_type_code VARCHAR2(3),
mult_auth_required          VARCHAR2(1),
mult_prom_auth_required     VARCHAR2(1)
)Destination tables being inserted into
create table POR_MULTIPLE
mult_multiple_num           NUMBER(4) not null,
mult_name                   VARCHAR2(20) not null,
mult_selected_multiple      VARCHAR2(1) not null,
mult_anmw_multiple_code     VARCHAR2(3),
mult_link_multiple_num      NUMBER(4),
mult_jmw_multiple_type_code VARCHAR2(3),
mult_auth_required          VARCHAR2(1),
mult_prom_auth_required     VARCHAR2(1),
mult_parent_num             NUMBER(4),
mult_channel_num            NUMBER(4),
mult_active_flag            VARCHAR2(1) not null
create table MULTIPLE_GROUPS
mgrp_num         NUMBER(4) not null,
mgrp_description VARCHAR2(40) not null,
mgrp_parent_num NUMBER(4)
)

Receiving error message while trying to insert a pdf file into a Word document

Error while trying to insert a pdf file as object into a word documnet , error: "The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding.

Try disabling Protected Mode in Adobe Reader [Edit | Preferences | Security (Enhanced)].

Oracle error ORA-01461when trying to insert into an ORACLE BLOB field

Similar Messages

Maybe you are looking for