Oracle Errorr ORA-04098
I have a customer who is getting ORA-04098 "Trigger is invalid and failed revalidation". The trigger and the procedures it calls compile without errors. The trigger is enabled. I have tried recompiling all the procedures and then the triggers again but this hasn't helped. It is Oracle 8.0.3 on Windows NT. Can anyone suggest a course of action to get this running?
Thanks,
Karl
[email protected]
Karl,
This is the Oracle documentation on the error
Please check back and look for the proper authorizations for the trigger.
ORA-04098 trigger 'string' is invalid and failed re-validation
Cause: A trigger was attempted to be retrieved for execution and was found to be invalid. This also means that compilation/authorization failed for the trigger.
Action: Options are to resolve the compilation/authorization errors, disable the trigger, or drop the trigger.
Hope this helps.
Shyam
null
Similar Messages
-
Please could somebody tell me what to do. I use both Procedure builder and Sql plus (Oracle 8i and Forms 6i). I ran a script catproc.sql (That is bundled in the admin subdirectory) last night. When I try drop a stored procedure or function - I get the error ORA-04098: trigger 'SYS.JIS$ROLE_TRIGGER$' is invalid and failed re-validation. When I try to describe the trigger SYS.JIS$ROLE_TRIGGER$ both logged on as an ordinary database user and as the dba,oracle claims that the trigger does not exist.
Please what do I do.
This problem did not occur until I ran the script catproc.sql.Did you try compiling the trigger as SYS? What user did you run the catproc.sql script as? It should have bee run as the SYS user.
-
i'm getting the error message FRM-40735 AND ORA-04098 unhandled exception other than FORM_TRIGGER_FAILURE when i'm inserting the records into the database table from froms4.5.I DON'T have .fmb file but we have executable files .fmx how can i handle this situation.its an important process..
thank.check out the error message in the oracle db message book (available online on otn).
If you don't have the fmb you can't change the form but it might be a db problem that you can solve in the DB. -
Oracle error ORA-01461when trying to insert into an ORACLE BLOB field
I am getting Oracle error ‘ORA-01461: can bind a LONG value only for insert into a LONG column' when trying to insert into an ORACLE BLOB field. The error occurs when trying to insert a large BLOB (JPG), but does not occur when inserting a small (<1K) picture BLOB.(JPG). Any ideas?
BTW, when using a SQL Server datasource using the same code.... everything works with no problems.
ORACLE version is 11.2.0.1
The ORACLE datasource is JDBC using Oracle's JDBC driver ojdbc6.jar v11.2.0.1 (I also have tried ojdbc5.jar v11.2.0.1; ojdbc5.jar v11.2.0.4; and ojdbc6.jar v11.2.0.4 with the same error result.)
Here is my code:
<cfset file_mime = Lcase(Right(postedXMLRoot.objname.XmlText, 3))>
<cfif file_mime EQ 'jpg'><cfset file_mime = 'jpeg'></cfif>
<cfset file_mime = 'data:image/' & file_mime & ';base64,'>
<cfset image64 = ImageReadBase64("#file_mime##postedXMLRoot.objbase64.XmlText#")>
<cfset ramfile = "ram://" & postedXMLRoot.objname.XmlText>
<cfimage action="write" source="#image64#" destination="#ramfile#" overwrite="true">
<cffile action="readbinary" file="#ramfile#" variable="image_bin">
<cffile action="delete" file="#ramfile#">
<cfquery name="InsertImage" datasource="#datasource#">
INSERT INTO test_images
image_blob
SELECT
<cfqueryparam value="#image_bin#" cfsqltype="CF_SQL_BLOB">
FROM dual
</cfquery>Can't you use "alter index <shema.spatial_index_name> rebuild ONLINE" ? Thanks. I could switch to "rebuild ONLINE" and see if that helps. Are there any potential adverse effects going forward, e.g. significantly longer rebuild than not using the ONLINE keyword, etc? Also wondering if spatial index operations (index type = DOMAIN) obey all the typical things you'd expect with "regular" indexes, e.g. B-TREE, etc.
-
Hi all,
I have an Windows XP OS with SP3.
I have installed the Oracle 11g server.
On trying to connect to the ODBC connection, i get the following error message:
Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170: TNS: Connect timeout occured
On trying the tnsping,
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 09-OCT-2
011 13:11:05
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\app\Gautam\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.
5.207)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl))
TNS-12535: TNS:operation timed out
On trying to connect with SQL Developer, i get the following error:
Status: Failure - Test failed: Io Exception: The Network Adapter could not establish the connection
However i am able to connect to the same using SQL Plus
Another issue that occurs is that the Oracle Enterprise Manager shows the following error after a while:
Agent Connection to Instance
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
The following services are all up during this point of time:
OracleDBConsoleorcl
OracleOraDb11g_home1TNSListener
OracleServiceORCL
Any help in this regard will be very useful as this is hindering the progress of my work.
Thanks in advance for the help.
- Gautam841683 wrote:
Hi,
I did try and delete my listener.ora and then create a new one..
That did not solve my issue..
What are the steps for configuring the listener again.
Thanks for the response..
- Gautamno listener.ora file is required.
just do as below
lsnrctl start -
[Oracle][ODBC][Ora]ORA-01426: numeric overflow
I have a function get data from data base and do some calculating. I call this function from ASP web page. Some times I got the following error. But if I click refresh later. It's ok again. Any ideas?
[Oracle][ODBC][Ora]ORA-01426: numeric overflowCause: Evaluation of an value expression causes an overflow/underflow.
Action: Reduce the operands. -
Oracle returns ORA-03113 EOF error when using openquery in SQLServer 2005
Hi
Our Application runs batch process on every moring . One of jobs is to get all rows from an oracle database and put all data into MS Sql Server Tables. Usally It works fine But Sometimes during getting data from a certain table oracle raise Ora-03113 error during
getting data from MSSQL Server. we use mssql openquery clause to get data from oracle We just use OPENQUERY to get all data of oracle view( i.e Select * FROM OPENQUERY(LINKEDORACLESERVER , "SELECT * FROM SCV0XE") )
This Error comes once a month. So I don't have any idea why this error happens. I am using MSSQL 2005 SP2 , Oracle 9i 9.2.01
And I tested both microsoft provider and oracle ole provider. Both Driver failed
Any Solution or Advice will be appreciated...
Regards,
ParkHi bborie :
I think I encounter same problem as you, I schedule a job of MS SSIS to do data transfer from Oracle to MS sqlserver every morning. Bt MS SQL server report "ORA-03113 : end-of-file on communication channel error ".
And Oracle alertlog report "inbound connection timed out (ORA-3136)"
sqlnet.log list "TNS-12535: TNS:operation timed out"
does your problem solved ? -
---cmd prompt------------------------
H:\>sqlplus scott/tiger
SQL*Plus: Release 10.2.0.3.0 - Production on Sun Mar 28 16:54:53 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
-------------ASP -------------------------
<%@ Language="JScript" %>
<%
var uname=Request.Form("un");
var upwd=Request.Form("pwd");
Response.Write("User Name is " + uname + "<br>" + "password is " + upwd);
var sql = "select * from emp";
var conn = Server.CreateObject("ADODB.Connection");
var rs = Server.CreateObject("ADODB.Recordset");
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';";
rs.Open(sql, conn, 3, 3);
%>
------------------Error------------------
User Name is scott
Password is tiger
Microsoft OLE DB Provider for ODBC Drivers error '80040e4d'
[Oracle][ODBC][Ora]ORA-01017: invalid username/password; logon denied
/prc/main.asp, line 11
variable uname has valid username that is 'scott' and variable upwd as valid password ie 'tiger' both entered by the user.
with the same username and password i am able to connect to the database from the command prompt.
but when i tried using odbc through ASP(javascript) i am getting above error.
and one more thing if i mention username and password directly in UID and PWD it works but when i pass it through variables it wont work.
since variables have username and password it has to take from it directly...........manually i cant give,dynamically it has to take.
plz help me out....how i can pass the parameter to that UID and PWD.
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';";
help plz
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';"; --- does not work
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID=scott;PWD=tiger;"; --- works
but i want the 1st statement to work........since user gives the password and username dynamically.
Thanks
Veeresh Sconn.Open("DSN=tcp;UID="+uname+";PWD="+upwd+";");
this solved me
thanks for all who had vied this..
veeresh -
Using PreparedStatement and the Oracle Error ORA-1000
Hi,
I have a question about PreparedStatement objects that is not so simple to explain for me. What I would like to know is: if I use a PreparedStatement following traditional and generic steps:
1- PreparedStatement pStmt = Connection.prepareStatement(sQuery);
2- pStmt.setXXX(i,j);
n - pStmt.setXXX(i,j);
n+1 - ResultSet rs = pStmt.executeQuery();
n+2 - while(rs.next()){ ... retrive ResultSet data ... }
n+3 - rs.close()
n+4 - back to point number 2
and at the end (as you can see in the point numbered n+4), instead of closing the PreparedStatement pStmt using the close() method, I reuse the PreparedStatement pStmt comeing back to the point numebr 2 and setting again all its parameters with new values ... then ... what heppens in the Oracle database ? Has been the cursor (so the mamory area), associated to my PreparedStatement object pStmt, duplicated or is it the same ?
I know that Java allows you to do this kind of operations with PreparedStatement, and I know that in tha Java Documentation is explained to follow this strategy to optimize the execution time because in this way the same PreparedStatement is precompiled and prepared only once. But if I do a for loop following the steps explained before, after many iterations I have the error "ORA-1000: maximum open cursors exceeded". This error is the reason of my question. Does this error means that it's mandatory to close a PreparedStatement always, otherwise if you reuse it without closing it then the corresponding database cursor will be duplicated ? If it is so, then I think this is a contradiction with official java documentation ...
I'm using Oracle8i (version 8.1.7) and Oracle JDBC Thin Driver (Windows NT) for use with JDK 1.2.x. Moreover, in my database istance the parameter "maximum open cursor" is equal to 800 ...
Thank you very much for suggestions :-)There is no need to close a prepared statement or its resultset for every iteration.
After the first iteration in a loop, all subsequent executions of it will close the previous resultset. By adding close() method, you are making one extra costly call to the DB for no reason.
Following is the sample code.I know what you are saying. In fact at the beginning I wrote my code in the same way of your sample (see the code of my first post at the begin of this page).
But doing so, after thousand iterations of the loop, I had "Oracle Error ORA-1000 : maximun open cursor exeeded" even if in my database istance the parameter "maximum open cursor" is equal to 8000.
At this moment in my code, for each iteration, I close the PreparedStatement and in this way I don't have anymore the error :-((
So it seems that only in theory we can reuse a preparedStatement without closing it. In fact if we see the oracle system table "$open_cursor" (as Konrad Pietzka suggest me) we can find that, for each interation,
at our line code "rs = pstmt.executeQuery();" correspond a new cursor in the database: this means that for each method "pstmt.executeQuery()" the database open a new cursor and do not use the previous one as it should.
I posted a question two months ago to search if someone had the same problem (it seems that Konrad Pietzka had the same situation) and was able to explain me what is the cause.
The only reason I found by myself for this problem, is that probably the Oracle JDBC Thin Driver for Windows NT/2000 has some bugs... but I'm not sure ...
Thank you very much for you time !!
bye :-))
Fidalma -
Unable to connect SQLState=08004 Oracle ODBC Ora-12154
Hi Sir/Madam,
I am Wayne, I need your help to resolve my issue in oracle database 11g.
1. I installed Oracle 11g Personal Edition, Release 11.2.0.10, 64bits,
2. Test connection(oracle in oradb11g_home1) is successed in data source, odbc,
2. Then, I tried to connect this with Visual Basic(Visual Studio 2010), data connections, add connections, .net framework data provider for oracle,
3. but I received an error message as "Attempt to load Oracle client libraries threw BadImageFormatException."
4. Then, I download the ODAC(11.2.0.3.0) for 64bits, and installed,
5. I tried to test the connection, but failed with error message as stated above,
"Unable to connect SQLState=08004 Oracle ODBC Ora-12154: TNS:could not resolve the connect identifier specified"
Could you please give me a help on this, do I need to install ODAC for 11g Personal Edition ? Please advice accordingly, thanks.Hi;
Please review:
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2309520
http://stackoverflow.com/questions/206055/oracle-ora-12154-tns-could-not-resolve-service-name-error
Regard
Helios -
Hi,
I am trying to insert an xml doc into a column of Oracle table which has a datatype CLOB in JSP. PFB my code that I am using --
int id = 100;
String st1 = "NEW";
String st2 = "WLR3_IN_1";
Date dt = new SimpleDateFormat("mm/dd/yyyy").parse("04/02/2008");
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:CST Server","xmluser","xmluser");
String query = "INSERT INTO SEQ_API_MESSAGE_IN(SEQ_NO,MESSAGE_TEXT,STATUS,DIALECT,CREATED_TS) VALUES(?,?,?,?,?)";
out.println(6);
String fn = "C:/order.xml";
out.println(7);
PreparedStatement stmt = con.prepareStatement(query);
out.println(8);
File file = new File(fn);
out.println(9);
FileReader inputFileReader = new FileReader(file);
stmt.setInt(1,id);
stmt.setCharacterStream(2,inputFileReader, (long)file.length());
stmt.setString(3,st1);
stmt.setString(4,st2);
stmt.setDate(5,new java.sql.Date(dt.getTime()));
out.println(10);
if (stmt.executeUpdate() != 1) {
System.out.println("No record inserted.");
But I am getting an output in the form of an Oracle error - 5 6 7 8 9 10 [Oracle][ODBC][Ora]ORA-24801: illegal parameter value in OCI lob function
So all the statements are getting executed after which this Oracle error is thrown. Could you help me with this.
Thanks in anticipation.. :)As suggested I may try switching to JDBC instead of JDBC-ODBC bridge driver , but I also tried doing this to get the sysdate --
//Date dt = new SimpleDateFormat("mm/dd/yyyy").parse("04/02/2008");
String date = DateFormat.getInstance().format(new Date());
stmt.setString(5,date);
and now I am getting this error -- 5 6 7 8 9 10 [Oracle][ODBC][Ora]ORA-01843: not a valid month Hello1
Hello1 is coming from --
catch (SQLException sqle){
out.println(sqle.getMessage());
out.print("Hello1");
} -
Oracle Alert - ORA-1652 Unable to extend the Temp Segment
Hi Team,
During our DB Reorg we have received the Oracle Alert - ORA-1652 Unable to extend the Temp Segment by 15485 in tablespace :PSAPBTABI.
Our DBReorg got cancelled..
We would like to know how we can resolve the above error so that we can reschedule the DB Reorg activity..
Regds,
Satyanarayana NHi,
If you are using UNIX OS, the temp files are created as sparse file due to the OS functionality.
Altough you have assigned 49 GB the actual size will be very very less.
You can check the actula file size with du or df command. To remove these sparse condition you will need to perform certain steps.
Read this note and execute the steps given and then see the file size difference.
548221 - Temporary Files are created as sparse files
Do update the message if the OS is different.
Regards,
Nilesh -
Hello,
I'm using unixODBC with ODBC Oracle client 11 (Debian 7) to connect to Oracle database version 9.2.0.6 (Solaris 10), but show me this message:
[S1000][unixODBC][Oracle][ODBC][Ora]ORA-03134: Connections to this server version are no longer supported.
Note: I can connect to Oracle database version 10+.
Please can you help me.
Thank youAre you positive you're using version 11 Oracle client and 9206 database? That combination should work, and Ive never seen that error message occur for anything but the expected reason.
If you have MOS access you can check the client/database compatibility with the following note:
Client / Server / Interoperability Support Matrix For Different Oracle Versions (Doc ID 207303.1)
Hope it helps,
Greg -
Oracle/PLSQL: ORA-00932 ErrorError: ORA-00932: inconsistent datatypes
I am getting this error in a PL/SQL package, using SQL using the NVL function.
Oracle/PLSQL: ORA-00932 ErrorError: ORA-00932: inconsistent datatypes. Cause: You tried to perform an operation between two different datatypes, but the datatypes are not compatible.
I do not get this error on a 10.2.0.4 instance of the database running in Windows.
Anyone come accross this type of issue in 11g Rel.2 or after migrating from 10g to 11g??
Thanks.Dear user520935,
What are the contents of the package? Where do you exactly get that error?
http://ora-00932.ora-code.com/
Have you checked the metalink about it? There are lots of articles about it.
Ogan -
UPDATE problem - [Oracle][ODBC][Ora]ORA-01456
I try to UPDATE a table using following driver, url and syntax :
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); // load driver
Connection conn = DriverManager.getConnection("jdbc:odbc:JDEV", "salgsinfo", "si"); // get connection
but receives this answer :
java.sql.SQLException: [Oracle][ODBC][Ora]ORA-01456: INSERT-, DELETE- or UPDATE-statements cannot be done in READ ONLY-transaction
the user is granted dba priviliges, what can i do ?
NielsORA-01456:may not perform insert/delete/update operation inside a READONLY transaction
Cause:A non-DDL INSERT/DELETE/UPDATE or SELECT FOR UPDATE operation was attempted.
Action:Commit or roll back the current transaction, then retry the operation.
Maybe you are looking for
-
How to change a photo from 32 bit mode to 16/8 bit mod in Photoshop cs6?
How to change a photo from 32 bit mode to 16/8 bit mod in Photoshop cs6? I tried to go to Image- Mod but i cant press on Mod button.. I saw to late that i cant save the image i created with 32bit mode. Please help..
-
i want to change the layout of a medruck and i want to add a logo of my own .. How can i do. Can anybody help me..
-
Partition by month - Advice please
Guys, I am about to partition a table based on months. I need a months data to get to a single partition. Please can you tell me if this is the best way to do it ? PARTITION BY RANGE(RECEIVED_TIMESTAMP) PARTITION PRT2007_10 values less than '31-OCT-2
-
Hi Experts.. How can check the message control changes in PS Cycle ...can anyone help me .... Like when budget is exceeded from where the message "Error in commitment check " is come ....where I can see this in system .... Thanks & Regards Rama Shank
-
Uploaded new site but want to keep old site-previous topic didn't help
Hello there, hailing from Australia. I've actually read a similar topic on this problem I have. I'm using GoLive 8.0.1 and have just completed a website for a client and wish to upload it to the server. I've used GoLive everytime to publish the site.