Oracle.exe using 100% when loadjava

I have a problem when loading a jar file that pause at resolving stage for a long time. This is because the oracle.exe to use up 100% system resource. Could anyone tell me how large the jar file have to be inorder to avoid it? I had try to restart the system and it work only for one jar file after that my second jar file lead to the same problem again.

Similar Messages

Oracle.exe consuming 100% CPU on windows and database hang

Hi all,
every time my oracle database is hanging when the application run, the problem is the oracle.exe consum 100% CPU but not memory and the server hang and the dabase is going to inaccessible, we need to restart oracle instance service or server to bring the databas eback to normal but it's not permanent because the problem occurs once the application turn on.
Checking the log file i found the below error every time:
My database version is 9.2.0.7.0
OS: Windows 2003 Server Standard Edition Service Pack 2
RAM: 3,5Gb
CPU: Inte Xeon 3.20 GHz
ORA-00600: internal error code, arguments: [kghuclientasp_03], [0xBFEADCE0], [0], [0], [0], [], [], []
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04050: error while attempting to allocate 163500 bytes of memory
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
Fri Mar 05 05:35:15 2010
Errors in file e:\oracle\admin\optprod\udump\optprod_ora_5876.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-04030: out of process memory when trying to allocate 8389132 bytes (pga heap,redo read buffer)
ORA-04030: out of process memory when trying to allocate 8389132 bytes (pga heap,redo read buffer)
ORA-04030: out of process memory when trying to allocate 8180 bytes (callheap,kcbtmal allocation)
Thank you
Lucienot.

Is this a new application on this database?
Has it run well in the past?
I have had this happen before on a 32bit Windows server. Our problem was a poorly written procedure that kept pegging the cpu to 100%. You should be able to figure out what SQL is being used that is causing this problem, it will be the Top Working SQL most likely.
I also had this problem on a Logical Standby server which was trying to apply SQL to the SYS.AUD$ table. As soon as SQL Apply was started, the CPU went to 100%. Once I truncated that table, the cpu usage went back to normal. Not sure what you are using to monitor your database but if you can, try to find out what SQL is running when your CPU goes to 100%.

I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

When I called Apple Support to ask about the 100% CPU usage, they wanted to charge me because my Ipod was out of warranty. I insisted on talking to someone and finally got to talk to a software engineer for free. He said that he had never heard of the problem in his three years at Apple. Nonetheless, he sounded really interested and suggested that it might be a conflict with anti-virus software. I deleted the antiviruse and that DID NOT HELP AT ALL.
It seems as if Apple could care less. There is no official response. Their primary response is to look at the Forum. At least you find out that the problem isn't your fault, it really is Apple!!!!
So far the best solution is just to delete iTunes and use Mediamonkey to sync your pod.
Apple, please fix this!!!!!

W3wp.exe using 100% user time and 0 % priviledge time

Hi all
We deployed application (enhancements) which is developed with ASP.NET with C# code behind.
After deploying in Application server we are getting problem
Like "w3wp.exe using 100% user time and 0 % priviledge time"
Please help me regarding what may be the problem.

How to trace web URL ?
Refer:
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/c56d19af-b3d1-4be9-8a6f-4aa86bacac3f.mspx?mfr=true
http://forums.iis.net/t/1146821.aspx
Regards, RSingh

Colsvrcore.exe using 100% cpu load - how to debug ?

Hi,
I'm new to Zenworks and facing a high load issue on one of my Collection Servers.
Colsvrcore.exe goes 100% load after 30 sec and stays there.
My question is: How can i debug on this issue ?. I was thinking bad data or something could lead to this high load.
Regards
Anders Jensen

gf2e,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How oracle.exe uses cpu

Hi all,
Does anyone know how Oracle 10g uses CPU on windows OS?
I'm interested to know is the oracle responsible for load balancing across the CPUs or OS do that.
Is there some Oracle technical documentation?
Thanks.

The OS handles CPU scheduling, not Oracle.
All of the Oracle docs can be had at http://docs.oracle.com

A process java.exe uses 100% cpu

This problem stops me start database 10g on Windows XP. I am wondering anyone might have same experience before and could share how to fix the issue. Here is situation:
Every time when 10g database starts, a process java.exe which is loaded by nmesrvc.exe (I think it is OracleDBConsoleMyInstance, right?) uses 89% cpu forever. Because of this, OEM couldn't work! Shutdowning the database and restarting it didn't solve the problem. Killing nmesrvc.exe can stop the java.exe. SQL*Plus still works. But iSQL*Plus didn't works.
If I stop process OracleDBConsoleMyInstance from Services of Windows, I got error: Error 1053.
What is wrong here. Your help will be appreciated,

I had the same problem and was able to resolve it.
I am using 2 W2K3 servers, one for infrastructure and one for mid-tier (Portal). On the infrastructure machine I used the Administrative Tools -> Services Management Console and first stopped the OracleDBConsole, CPU was still 100% busy. Then I stopped the OracleINFRAControl and the CPU went to 0%. Then I restarted the OracleINFRAControl and then OracleDBConsole and now the CPU is hovering around 2%.
I ran some tests from another machine and everything seems fine.
Bill G...

Cwjava.exe uses 100% utilization in LMS 3.1

We have observed that cwjava.exe process nearle utilizing 80% - 90% cpu utilization in LMS 3.1
It makes that LMS server responding slow.
Please tell how to overcome this problem.

On which platform is LMS running?
what size does the syslog file has?
If you have Firewalls sending logs to LMS, this could bring heavy load on the server.
Another issue could be the name resolution mechanism for syslog messages and a slow or even failing DNS for these requests.
In LMS 2.6 - LMS 3.0.1 this could be enabled/disabled in
Common Services > Server > Admin > System Preferences
But it seems that they removed this config point in LMS 3.1 - at least I cannot find it...
These log files could shed some light on this:
AnalyzerDebug.log
SyslogCollector.log
Also the defined syslog filters could have an impact and slow down the process.
As a last resort, you also can try to just restart SyslogAnalyzer and SyslogCollector process and see if the problem goes away. You should do this in a one-liner to avoid a manual resubscription of the SyslogCollector
# stopping the processes:
pdterm SyslogCollector SyslogAnalyzer
# control their state:
pdshow SyslogCollector SyslogAnalyzer
# starting the processes:
pdexec SyslogCollector SyslogAnalyzer

Internet browsing uses 100% cpu

Hello everybody.
This situation has driven me crazy the last 4 months and till now i have not figure it out.
Everytime i have a video streaming in my computer, CPU usage goes to 100%. It happens every time, either using internet explorer or Firefox or Google chrome. Even when i have a skype video call or a gtalk video call. Some description of each one:
Using internet explorer: While i am watching a youtube video, CPU limits up to 100% after 1 minute or sometime 5 minutes. I am not able to watch a 15min video. Internet explorer process uses 100%CPU. When i kill it via task manager, another instance of IE
appears with the same CPU usage. I also kill it and then 4 or 5 instances of rundll32.exe appear consuming 100CPU. If i kill them, explorer.exe uses 100% of cpu. If i do nothing and just wait, CPU is 100% for two hours. If i just kill only IE instances, taskmngr.exe
is consuming 40-50% of CPU for 1-2 minutes, then other processes like conhost or csrss consumes the same amount of CPU and after 4-5 minutes everything comes back to normal. That's the story everytime i use IE 11.0.9600.16518
Using Firefox: While video streaming, flash player process consumes all CPU. When i kill it, the same behaviour described above occurs.
Using Google Chrome: When i run it, 5-6 instances of google chrome appear in task manager and after some time this browser also hungs with 100CPU.
All above are also happening while i run Skype either i have a video call or just text messaging. Sometimes svchost is 25-30 % and system hungs.
Operating system is Windows 7 home premium 64bit with SP1, my graphics card is NVidia Gforce GT 230M (latest drivers 20% when these situations occur, my system is extremely slow and whatever i do, it limits up CPU usage.
Any assistance is acceptable. Thanks for the patience.

Hi,
First, I would suggest that you reduce the hardware acceleration on the computer and check if it helps.
a. Open Screen Resolution by clicking the Start button, clicking Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
b. Click Advanced Settings, click the Troubleshoot tab, and then click Change settings.
c. Note that some video card drivers do not permit you to change settings.
d. Move the Hardware acceleration slider toward None to reduce or turn off video hardware acceleration.
This issue can be caused by confliction from one of the background programs or add-ons.
You may use Process explorer as Milos mentioned to find the root cause to fix the issue:
Process explorer:
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
You can follow the references below to troubleshoot the issue:
1. 3RD part app: Remove to check the issue
2. Drivers: Update or install compatible version
3. System process/service: Upload the log file for analyzing.
I also would like to suggest you use Windows Performance Recorder to check the issue:
Troubleshooting Windows Performance Issues Using the Windows Performance Recorder
http://blogs.technet.com/b/askpfeplat/archive/2013/03/22/troubleshooting-windows-performance-issues-using-the-windows-performance-recorder.aspx
To diagnose HDD and RAM, I would like to suggest you contact your computer vender.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Solution: iTunes 10.5 using 100% CPU / Not backing up your iPhone.

This solution has been documented on this forum by several people, but the solution is usually deep in multiple threads. I really don't know who came up with it first, but it does indeed work.
I had an issue with iTunes.exe, APSDaemon, and AppleMobileDeviceHelper.exe using 100% CPU per core. (Showed as 25% in Task Manager.)
I could not backup my iPhone and the CPU spike happened as soon as iTunes 10.5 was started on Windows 7 Home Premium x64.
This solved it.
Sounds stupid but works:
1. Quit iTunes.
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> Right Click "Command Prompt" -> "Run as Administrator")
3. Once in the command prompt, type "netsh winsock reset" and hit ENTER.
4. Reboot your machine.
5. Restart iTunes.
6. ???
7. Profit!

The netsh winsock reset resolved both the problem of AppleMobileDeviceService.exe using 100% of my CPU and the blank iTunes blank store issue.
XP Pro user here that had gone through the detailed step-by-step process of uninstalling iTunes as described on the support page but both problems still existed.
Glad I saw this. Thanks.
Now on to :
7. Profit!

Oracle.exe(oralce 10.1) on Window 2003 is using 100% CPU

Oracle.exe(oralce 10.1) on Window 2003 is using 100% CPU.
while using importing. CPU IS PENTIUM 4 AND RAM IS 2G
any tuning ideas ?

WEll I just did google for you:
Take a look at:
http://www.dba-village.com/village/dvp_forum.OpenThread?ThreadIdA=15940&DestinationA=RSS
Hope this Helps
Regards

Vtserver.exe cpu usage at close to 100% when using Media Manager

On an Intel P4 PC running 32-bit Windows XP (sp-3), 2 GB of RAM and 500 GB hard disk, hardwired 100 Mbs connection:
When attempting to stream video from the MM PC to the DVR, the video is choppy. Upon examination of the processes running on the MM PC, VTServer.EXE is running at about 90-100% when streaming video. There is plenty of available memory.
Media Manager software has been uninstalled and reinstalled.
MM video component check has been run.
New MM version check run - no new version.
No SW firewall software/hardware in place.
Virus Scan disabled.
DVR has been rebooted.
Router has been rebooted.
Videos play without problem on the PC either via Windows Media Player or via the Media Manager player. The problem is when they are streamed to the DVR (choppy video/audio)
When playing videos, choppy video and audio is observed.
Does anyone have an idea what the problem is?

ak2,
Pls check your PMs. Thanks.
Regards,
Chris
Christian
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

Oracle uses 100% CPU

Hi,
I have installed Oracle 10g R2 on 64bit linux. It was working fine, until last week. I got alert that oracle uses 100% CPU.
Some lines from alert:
4894 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 56.3 12978 7720 22860 oracle
9244 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 50.4 10357 7720 22860 oracle
11798 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 41.1 4429 7720 22860 oracle
11740 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 28.3 45350 7724 22864 oracle
1516 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 24.2 29968 7728 22868 oracle
17006 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.8 21913 7724 22864 oracle
19449 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.5 20865 7720 22860 oracle
24877 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.0 18708 7728 22868 oracle
26566 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 18.4 5727 7724 22864 oracle
1788 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 17.1 3319 7724 22864 oracle
When I log in to EM, I can see section
Host CPU
It is 100%.
I have only instance named "parama". and it uses 1% CPU ant the picture shows that 99% CPU is used By Other.
What is Other? Why does it use that much CPU?
I had another oracle instance few months ago, but I is not used now (it is not even started).
How do I restore normal system performance?
Can I kill these processes?

Hello,
I have a similar problem. I see 2 perl processes related to Oracle that are taking up 99% of 2 cpus. These 2 perl processes have been running for days and keeping the load average high (above 2) on a mostly idle system.
The 2 perl processes are running:
/oracle/app/product/10.2.0/db_1/perl/bin/perl /oracle/app/product/10.2.0/db_1/sysman/admin/scripts/db/dbarchfull.pl
and
/oracle/app/product/10.2.0/db_1/perl/bin/perl /oracle/app/product/10.2.0/db_1/sysman/admin/scripts/db/dbresp.pl
Has anyone seen this problem? Can I kill the perl processes?
--Dan

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Oracle.exe using 100% when loadjava

Similar Messages

Maybe you are looking for