Oracle Forms (11.1.2.2.0) is supported on RED HAT 7
Hi, all...
I need know if Oracle Forms (11.1.2.2.0) is supported on RED HAT 7, in certmatrix, the RED HAT 6 is supported, if I install in RED HAT 7, Oracle supports the product?
Thank you.
This forum is dedicated to support the Oracle Maven Repository and related Maven functionality and therefore, are unlikely to find answers to your Oracle Forms-related questions here. However, if the certification matrix does not explicitly list RHEL 7, that means that it has not been certified to run on RHEL 7.
Similar Messages
-
Oracle Linux 6.2 with RH compatible kernel .versus. Red Hat Linux 6.2 diff?
Hello everyone
* assume that I booted Oracle Linux 6.2 with a Red Hat Compatible Kernel - as opposed to booting the Oracle Linus 6.2 with UEK R1 or UEK R2 kernels *
I am interested in any feature differences between the two OS relating to: functionality, reliability, performance, stability and tools.
The reason I ask is that my employer is trying to figure out if OL 6.2 with a RH compatible kernel is identical to the RHEL 6.2 OS, if we excluded the Oracle UEK and Oracle clustering extra functionality.
This OS will not be used to run Oracle 11g R2 database, this is to be used for any other Linux based non-database applications (such has running Java, JDBC, Apache, C/C++, etc).
many thanks
Yuriyurib wrote:
So now I can tell them to use Oracle Linux 6.x with a RH compatible kernel for all those non-DB systems and use OL 6.x with UEK for Oracle 11g database.
And I remember there was (still is?) a third kernel, which does not contain new features or performance enhancements, but only bug fixes for the RH compatible kernel.
I am not sure if you are going to need it, but it can be very useful in some cases. For example, if there is a bug in the RH kernel, and you don't want to run the UEK line as you want to stick to 100% strict RHEL compatibility, then Oracle can put the fix into this 3rd bug-fix only RH compatible kernel series.
(For me, I've set up dual-boot UEK & standard RHEL kernels on my machines and never have never encountered issues or bugs.)
>
Many thanks, as always
Yuri -
Oracle Forms New Features - Your input. Supporting data types
I am interested to know IF we were to support any new database types in Oracle Forms 11g, which types would you like supported and why. I'd also like to know if you are currently working around the absence of a database type.
Please note, this is not any kind of commitment to support new data types in Oracle Forms applications but we are interested to know if there is demand and if so, for what types.
Thanks
Grant Ronald
Oracle Forms Product Management
p.s lets keep the thread focused on the topic so please don't post technical questions or comments about different new features - if you want to, start a new thread - thanksHi Grant,
support for the "new" - well they exists since 9iR1 ... 2001 - data types TIMESTAMP, TIMESTAMP WITH TIME ZONE, TIMESTAMP WITH LOCAL TIME ZONE, INTERVAL YEAR TO MONTH and INTERVAL DAY TO SECOND would be very helpful.
Currently it's not possible to use the Data Block Wizard to create a data block for table/view that contains one of these columns.
(In Forms Builder 10.1.2.3 it fails with a strange error message ... iewbdbc_oracle_to_id ... C:\forms\101220\src\ie\iewbdb.c:724 ...)
So, one has to create the data block and the items manually. The items have to be CHARS.
Then forms is able to fetch and display these columns. The user can edit them as normal.
A WHEN-VALIDATE-ITEM trigger can be used to make sure that the implicit conversion from CHAR to the "new" datatype works.
For example, an INTERVAL YEAR TO MONTH column (b):
declare
l_invalid_interval exception;
pragma exception_init(l_invalid_interval, -1867);
l_invalid_month exception;
pragma exception_init(l_invalid_month, -1843);
l_dummy interval year(9) to month;
begin
l_dummy := to_yminterval(:block2.b);
exception
when l_invalid_interval
then
message('invalid interval');
raise form_trigger_failure;
when l_invalid_month
then
message('invalid month');
raise form_trigger_failure;
when others
then
message(error_text);
raise form_trigger_failure;
end;This nasty trick works for most of the "new" datatypes except with TIMESTAMP WITH TIME ZONE.
In Forms 10.1.2.3 the following WHEN-VALIDATE-ITEM trigger can (incorrectly!) fail:
declare
l_dummy timestamp with time zone;
begin
l_dummy := to_timestamp_tz(:block2.a);
end;It fails with "ORA-01804: failure to initialize timezone information", if the time zone is not like "-11:00", but like "EUROPE/PARIS". Don't know why...
If we recode our trigger to make a round-trip to the database, it works:
declare
l_dummy timestamp with time zone;
begin
select to_timestamp_tz(:block2.a)
into l_dummy
from dual;
end;We could avoid these tricks, if Forms (and Reports) would support these type natively.
Thanks, Michael
PS: The TIMESTAMP and INTERVAL data types should of course be supported as items, parameters, globals and record groups columns.
Edited by: michael76 on 25.10.2010 01:14 -
Oracle Forms 11g SSO with OID and IAM
What versions of OID and Access Manager are required to get an Oracle Forms and Reports 11.1.1.2 application
on Weblogic 10.3.2 configured for Oracle SSO using OID authentication?
We want the OID to store and authenticate Users for username and password logins to the database, then
ultimately by user Certificate authentication in OID. I have OID 11.1.1.2 installed and SSO enabled for Forms
in Enterprise Manager.
Is Access Manager required for Forms SSO with OID authentication to work or just to allow user interaction
for registration and Password reset?
Things mention OAM 10.4.3 and others talk about IAM 11g for Forms 11.1.1.2 SSO to work with OID.
We did this back in Oracle Forms and OID 10g with JSP and LDAP to setup users but I understand 11g is
different and IAM can help or is required for this type of SSO to work.
Any help?
Edited by: Kirch on Apr 30, 2013 7:39 AMHi,
According to Oracle's certification matrix found at http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls, Oracle Forms 11.1.1.2 is not supported to use any Oracle Access Manager (OAM) version. OAM is a component of IAM. It is only supported with Oracle SSO 10.1.4.x. The best solution would be to upgrade the Forms and Reports environment to either 11gR2 (11.1.2.1) or to the latest 11gR1 patchset 11.1.1.7. Both versions are compatible with OAM 11.1.1.7.0 and OID 11.1.1.7.0 where only Forms 11gR2 (11.1.2.1) is compatible with OAM 11.1.2.0 and OID 11.1.1.7.0. That would be the best solution as we have ran into configuration problems in the past with using Oracle SSO 10.1.4.x.
Since OID 11.1.1.2.0 is already installed, you should be able to patch it up to 11.1.1.7.0.
For user authentication in OID, it is required to have OAM or Oracle SSO as both products use WebGate or mod_osso agents for authentication and authorization. For purposes of allowing end users to register accounts and password reset, you will either need to also install another IAM component called Oracle Identity Manager (OIM) or create a customized SSO login page that can be coded to perform these actions. I believe there are some examples available on the Internet.
Thanks,
Scott
http://pitss.com/us -
Installation of Oracle AS 10g on Red Hat ES 3.0
Installation of Oracle AS 10g on RedHat ES 3.0 (All issues are cleared and u will b done with no error like Java Configuration Failed and make files errors)
Red Hat Enterprise Linux 3 Custom Installation
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1. Boot the server using the first CD.
o You may need to change your BIOS settings to allow booting from the CD.
2. The boot screen appears with the boot: prompt at the bottom of the screen.
o Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3. Language Selection
o Accept the default.
4. Keyboard Configuration
o Accept the default.
5. Welcome Screen
o Click on Next.
6. Mouse Configuration
o Accept the default.
7. Installation Type
o Select Custom.
8. Disk Partitioning Setup
o A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9. Boot Loader Configuration
o Accept the default.
10. Network Configuration
o It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o In the Hostname box, select manually and enter the hostname.
o In the Miscellaneous Settings box, enter the remaining network settings.
11. Firewall Configuration
o For the purposes of this walk-through, no firewall is configured. Select No firewall.
12. Additional Language Support
o Accept the default.
13. Time Zone Selection
o Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14. Set Root Password
o Enter a password for root, and enter it again to confirm.
15. Package Group Selection
o Select only the package sets shown here. Leave all others unselected.
o Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o Applications
- Editors
- Graphical Internet
o Servers
- Do not select anything in this group.
o Development
- Development Tools
o System
- Administration Tools
o Red Hat Enterprise Linux
- Do not select anything in this group.
o Miscellaneous
- Legacy Software Development
o Click on Next to proceed.
16. About to Install
o Click on Next.
17. Installing Packages
o Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18. Graphical Interface (X) Configuration
o Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19. Monitor Configuration
o Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20. Customize Graphical Configuration
o Accept the defaults.
21. Congratulations
o Remove the installation media from the system, and click on Next.
22. The system automatically reboots and presents a new welcome screen.
o Click on Next.
23. License Agreement
o Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24. Date and Time
o Set the Date and Time.
o If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25. User Account
o Create an account for yourself.
o Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26. Red Hat Network
o If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27. Additional CDs
o Click on Next.
28. Finish Setup
o Click on Next.
29. A graphical login screen appears.
30. Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln âsf /usr/bin/gcc296 /usr/bin/gcc
ln âsf /usr/bin/g++296 /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora ⦠oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan
@CES
[email protected]Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
oracleasmlib-1.0.0-1.i386.rpm \
oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant -
Installation of OracleAS 10g on Red Hat Linux ES 3.0
Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1. Boot the server using the first CD.
o You may need to change your BIOS settings to allow booting from the CD.
2. The boot screen appears with the boot: prompt at the bottom of the screen.
o Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3. Language Selection
o Accept the default.
4. Keyboard Configuration
o Accept the default.
5. Welcome Screen
o Click on Next.
6. Mouse Configuration
o Accept the default.
7. Installation Type
o Select Custom.
8. Disk Partitioning Setup
o A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9. Boot Loader Configuration
o Accept the default.
10. Network Configuration
o It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o In the Hostname box, select manually and enter the hostname.
o In the Miscellaneous Settings box, enter the remaining network settings.
11. Firewall Configuration
o For the purposes of this walk-through, no firewall is configured. Select No firewall.
12. Additional Language Support
o Accept the default.
13. Time Zone Selection
o Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14. Set Root Password
o Enter a password for root, and enter it again to confirm.
15. Package Group Selection
o Select only the package sets shown here. Leave all others unselected.
o Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o Applications
- Editors
- Graphical Internet
o Servers
- Do not select anything in this group.
o Development
- Development Tools
o System
- Administration Tools
o Red Hat Enterprise Linux
- Do not select anything in this group.
o Miscellaneous
- Legacy Software Development
o Click on Next to proceed.
16. About to Install
o Click on Next.
17. Installing Packages
o Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18. Graphical Interface (X) Configuration
o Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19. Monitor Configuration
o Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20. Customize Graphical Configuration
o Accept the defaults.
21. Congratulations
o Remove the installation media from the system, and click on Next.
22. The system automatically reboots and presents a new welcome screen.
o Click on Next.
23. License Agreement
o Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24. Date and Time
o Set the Date and Time.
o If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25. User Account
o Create an account for yourself.
o Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26. Red Hat Network
o If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27. Additional CDs
o Click on Next.
28. Finish Setup
o Click on Next.
29. A graphical login screen appears.
30. Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln âsf /usr/bin/gcc296 /usr/bin/gcc
ln âsf /usr/bin/g++296 /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora ⦠oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
oracleasmlib-1.0.0-1.i386.rpm \
oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant -
How to install Oracle 10g on to Red Hat Linux 5 Server
I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
ThanksUnfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid. -
ORA-3115 occuring after migration to Oracle 11.1.0.6 on Red Hat
Our application has been running on Tru64 5.1b, Oracle v9 for years quite happily. Since migrating to Red Hat Linux, Oracle 11 we've encountering ORA-3115 errors sporadically from a Pro*C call.
Our C executable maintains a connection to the database. Once the 3115 error occurs it occurs on every query to the database from that executable (other processes continue OK, something with the connection?). Our proram uses Pro*c queries with dynamic binds.
There seems to be no pattern to the frequency with which the error occurs.
The offending bit of code is usually:
EXEC SQL SELECT
UPDATE_INHIBITED,
LAST_UPDATE_TIME,
TO_CHAR(LAST_LIVE_UPDATE, 'HH24:MI:SS DD-MM-YYYY'),
LAST_TRANSACTION,
LAST_TRANSACTION_DG
INTO
:sql_update_inhibited,
:sql_last_update,
:sql_last_operational_update,
:sql_last_trans,
:sql_last_trans_dg
FROM SET_DETAILS
WHERE SET_ID = :sql_set_id;
This code has been unchanged for years. The fact that it usually occurs here probably more because this is the first database call completed as part of a scheduled process.
This problem is having an operational impact (as the updates do not occur) and I really need to get a resoltuion before the Christmas break.
As I said we've just migrated to a new server. There may be configuation parameters that are not perfect. Any suggestions on what we could double check?
Has anyone seen this before? Any ideas how I can work around this?
Thanks,
BeckIs your client is also 11g is not upgrade to 11g Client and try.
-
Oracle 10g/11g database use on UEK versus Red Hat kernel? How widely used?
Greetings
is there any official or semi-official information regarding how widely used is Oracle UEK to run Oracle 10g/11g database (RAC or single-node) versus running Oracle database on Red Hat Linux or on Oracle Linux with Red Hat kernel ?
I am asking because at my customer site there is a perception that Red Hat (or Oracle Linux with Red Hat kernel) is much more widely used in production to run Oracle 10g/11g database and therefore it will provide better stability even if the performance may be somewhat reduced compared to Oracle UEK option.
So I need some sort of approximate percentage numbers of how well is UEK used in Linux Oracle community to run Oracle 10g/11g databases.
Many thanks.
Yuri BThe problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. Well, in my opinion, a higher market share does not reflect the quality or reliability of a product. Take MS Windows for example. Unfortunately, the reason for success is often not due to knowledge and experience, but rather due to fear and sheep effect or herd behavior.
Perhaps you can use other arguments or questions to help you to make a decision, eg.:
Oracle has a better understanding of what Oracle products require than Red Hat.
Oracle takes full responsibility for the OS and Database, no finger pointing.
Oracle tries to provide a better product than the RHEL kernel.
The Oracle UEK kernel contains Oracle driver software, not available for RHEL 6 or later.
Oracle updates are free of charge, RHEL requires a subscription.
Oracle as a company is about 20 times bigger than Red Hat.
There can be reasons that require the use of the original RHEL kernel, for instance if the vendor of a specific driver for your hardware demands it. But otherwise... -
Red Hat Cluster Suite and Oracle RAC
HI Guys,
Our boss will plan to configure Red Hat Cluster Suite to replace to update oracle RAC.
Are there some experienced expert to explain advantage and risk of Red Hat Cluster Suite v Oracle RAC 11.2
Thanks
JinHi,
first of all Red Hat Cluster Suite cannot replace the RAC functionality. RAC is database Red Hat Cluster Suite, just provides clusterware. So all with what you will end up is a plain old failover cluster solution.
So in maximum Red Hat Cluster Suite can replace the Oracle Clusterware. (But not below a RAC, since this is not supported and even with integration with other clusterware Oracle Clusterware will still be there).
So what he will end up is also replacing RAC with single instance databases in a failover cluster solution, and with this will decrease a lot of RAC capabilities:
=> Rolling Upgrade (OS / Clusterware and some database patches)
=> Storage migration/consolidation
=> Fast failover (30 seconds vs. minutes).
See www.oracle.com and you will find whitepapers with differences between failover clusters and RAC.
http://www.oracle.com/technetwork/database/enterprise-edition/failover-cluster-134770.pdf
But even if there are other justifications to reduce availablity (which actually can only be costs), I still wonder, why he wants to replace Oracle Clusterware - the clusterware shipped with Oracle is far more mature than the one from the Red Hat cluster Suite.
And there is no better integration for Oracle databases in clusterware than what Oracle clusterware can provide.
Even more so, OCW is a full capable clusterware and you can build your own failover cluster solution for free.
The same would have to be done if he replaces it with redhat cluster.
PS: If someone is providing failover scripts for Oracle in Redhat clusters, it will be Redhat (but I think you have to write them yourself).
Regards
Sebastian -
I've downloaded Oracle 10g Express edition on to my computer running a Red Hat Fedora Linux OS. However having read the getting started page of the database setup and followed the instructions to open the Go To Database Home Page, on my applications menu section, I am greeted by a Unable to Connect to Server page. Followed by: Firefox can't establish a connection to the server at 127.0.0.1.
Has any one else had this problem? If so how can it be resolved?
I have already turned off the firewall on my OS and it has made no difference. Is it Oracles fault in that they have not maintained this page on their website? Or is it a problem with the way my computer is set?If you were able to reach to the end of the installation, then make sure both your database and listener are up and running. OracleXE requires the database to be registered against the listener to have the http access enabled.
From an OS prompt, ensure your environment variables are properly set,
ORACLE_HOME=pathToYourOracleHome
ORACLE_SID=XE #verify the instance name, xe or XE, it is case sensitive
PATH=$ORACLE_HOME/bin:$PATH
Then issue this command to verify the listener is up and running:
lsnrctl status
There you should see the http port at 8080 and the XE instance registered against the listener.
And verify the database is working:
sqlplus / as sysdba
SQL> select status from v$instance
You should see OPEN as the status.
Please post the output of the above commands.
~ Madrid -
SSO to Oracle Forms 6.0 and Oracle Reports 6.0
Hi,
Could somebody please explain how I should implement the SSO so that I can log on a forms application?
Should I use external partner app. ??
How can I parse the right parameters to the forms server ??
thanks,
JeromeHi,
Oracle Forms 6i does not support Advances Security for SQL*Net if this is what your question is. ASO is supported with Forms 9i and above
Frank -
Calling web service from oracle forms 10g
Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://gend:83/DesignService.svc?wsdl
The service was developed by us.
Calling the web service using JDeveloper works fine but when I complie in Oracle Forms it returns wrong number of types of arguments in call SENDHELLO.
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
xo ora_java.jobject;
rv varchar2(2000);
ex ora_java.jobject;
str varchar2(100);
BEGIN
jo := GendServiceClient.new;
rv := GendServiceClient.sendHello('Nora');
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
message(Exception_.toString(ex));
END;
Any help/ideas on this is greatly appreciated. Thanks.
Edited by: KE Nora Loera on Jun 1, 2012 1:24 PMMy primary skill is PL/SQL but the only information I found on Oracle's site to call a web service from a 10g Form was creating a jar file and importing the java class. Since I don't want to ask our corporate IT to make changes on the UNIX box for the jar files I went a different route.
I use UTL_HTTP.BEGIN_REQUEST to call a URL then load I load the data to a table as a CLOB since we have more than 4000 characters. Now I need to parse the XML and load it into a form. I have never done this so if there is a helpful site please let me know. I have looked at several sites but none do what I want.
Thanks -
Calling web service from oracle forms fails with ORA_JAVA.JAVA_ERROR
Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://www.webservicex.net/CurrencyConverter.asmx?wsdl
Calling the web service using JDeveloper works fine but from Oracle Forms returns ORA_JAVA.JAVA_ERROR; Unable to call out to Java, Invalid object type for argument 1
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
rv ora_java.jobject;
ex ora_java.jobject;
outString varchar2(2000);
BEGIN
jo:= CurrencyConvertorStub.new;
--This will get the exchange rate from US Dollars to UK Sterling.
rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD');
message (float_.floatValue(RV));
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
outString := Exception_.toString(ex);
message(outString);
END;
Any help/ideas on this is greatly appreciated. Thanks.Yes, it is the message line - so basically this call fails => rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD'); and control goes in the exception block
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
Below is the code from java stub that was generated using JDeveloper by using web services stub/skeleton and associating the WSDL
public Double ConversionRate(String FromCurrency, String ToCurrency) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "ConversionRate";
String targetNamespace = "http://www.webserviceX.NET/";
Vector requestData = new Vector();
requestData.add(new Object[] {"FromCurrency", FromCurrency});
requestData.add(new Object[] {"ToCurrency", ToCurrency});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
msg.send(endpointURL, "http://www.webserviceX.NET/ConversionRate", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (Double)fromElement((Element)responseData.elementAt(0), java.lang.Double.class);
} -
List Item problem in oracle forms
Hi,
I am using list item in oracle forms 6i and facing one problem. I am populating list using following built-in.
Clear_list()
Create_Group_From_Query( )
Populate_list()
The problem I am facing is when list gets populate it keep the cursor at last element of list with null value. I want cursor to go at first item in the list. Is this thing is possible. The list item I am using is pop-list. In combo its showing list perfectly but I have to use pop-list only. Please help to come out of this problem.
Thanks in advance
Shweta.Hi Shweta,
Please post your query in Oracle Forms discussion forum.
Thanks,
Wilson.
Maybe you are looking for
-
My three Time Capsules no longer show up anywhere in the Finder.
I have two older Time Capsules and one new Airport Time Capsule. They show up nicely in the AirPort Utility, but do not show up anywhere in the Finder-neither on the desktop nor the sidebar. The Yosemite software is all up-to-date on my iM
-
HT1351 I can't see device as an option when I try to sync my ipod
I can't see device as an option when I try to sync my ipod
-
Fatal error when trying to execute a dml-command with OLAP API
Hi, when I created an OracleConnection using the jdbc thin driver. The connection works fine. But when I try to execute any dml-command with an SPLExecutor the following fatal error occurs: oracle.express.idl.util.OlapiException: ORA-37118: Message 3
-
How to develop e-commerce using java
Can you please give me the source code for building e-commerce/web site using java?
-
hi i tried installing lion onto my macbook via a usb and when asks me to chose disk it says it can't install from this usb. anyone can help me figure out how to install it if i even can.