Oracle Forms Reverse Engineering with designer

Hi all,
I 'm trying to do a reverse engineering of Oracle forms with Oracle designer but all the attempts has failed. I'll will appreciate; if somebody can help on this.
thanks
Javed

I'm trying to do a reverse engineering of a simple form and it's crash in between. I'm following the below steps. Pl correct the steps if you think i'm not following in right way.
1. "Generate" menu from designer editor --> "Capture design of" sub menu--- > "form" sub-2 menu.
In the form page; i'm just selecting the form that I want to reverse engineer but when I'm clicking on start to capture the form the process fails.
Will appreciate if you can help on this.

Similar Messages

Module/Forms Reverse Engineering

I am under process of Reverse engineering. I have to create function/FHD from the the existing Modules. I don't know , How to deal it.I create Modules through Forms reverse Engineering , Entities through Tables , But don't know , How to create Function/FHD through Designer by Reverse Engineering.
Some one can help me ?.

Very Sorry to tell you, but this feature is not available in Designer.
You have to manually create functions and add entities to it.

Can we run oracle Forms 5 Application with 10G in Client/Server?

Hi All,
Can we run oracle Forms 5 Application with 10G in Client/Server
Mode?
Regards
Gaurav

In theory you can run it 2 tier - which means that you have the client (the machine the user is sitting at) being the same machine in which the forms application server is running. So yes. But specifically, we don't support a client server runtime anymore. 6i was the last version.
With 10g you will be running through a browser.
Regards
grant

Reverse engineering with Rational Rose

Is anybody using the above?
If so, have you developed any scripts to facilitate updating the Rose model,
and which you'd be willing to share? Or perhaps discuss jointly writing
same?
Ideally, there would be an Fscript to facilitate exposting Forte projects,
and a Rose script to facilitate import.
TIA,
Eric

Eric,
As part of tool evaluation for modeling, We evaluated Rational Rose 98i . We
were able to import forte pex files into Rose model.
We had no problems with reverse engineering but there were problems related to
round trip engineering.
Since Rational Rose 98i did not have a repository based solution for
configuration management, it was quite a task to keep the model in sync with
multiple users updating it. However, I believe you can use Microsoft Source
safe for configuration management though we did not try this.
Ramesh Timakondu
PSI Data SYstems Ltd.
One Bank Street, Ste. 406
Stamford, CT, 06905
(203) 359 3992
tnkrampsidata.com
"Fingerhut, Eric" <Eric.Fingerhuthbo.com> on 02/16/2000 04:26:59 PM
To: "'kamranaminyahoo.com'" <kamranaminyahoo.com>
cc: (bcc: Ramesh Timakondu/Consultant/NAC)
Fax to:
Subject: (forte-users) reverse engineering with Rational Rose
Is anybody using the above?
If so, have you developed any scripts to facilitate updating the Rose model,
and which you'd be willing to share? Or perhaps discuss jointly writing
same?
Ideally, there would be an Fscript to facilitate exposting Forte projects,
and a Rose script to facilitate import.
TIA,
Eric
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Migrating from 6i to 9i for form generating starting with designer

I try to migrating our forms generating 5-6 years start with designer, but they are finished through form builder.
When I tried to use migrating assistant wizard, I get
LMDMANA.CG$WHEN_NEW_FORM_INSTANCE: The String CALL was found. If it is an occurence of the Forms Built-In, It should be replaced with CALL_FORM.
Here is my LMDMANA.CG$WHEN_NEW_FORM_INSTANCE procedure
/* CG$WHEN_NEW_FORM_INSTANCE */
PROCEDURE CG$WHEN_NEW_FORM_INSTANCE IS
BEGIN
/* CGLY$INIT_CANVASES */
/* Call procedure to ensure correct canvases are visible */
BEGIN
CGLY$CANVAS_MANAGEMENT;
END;
/* CGBS$STARTUP */
/* Perform start-up processing for Block Synchronisation */
BEGIN
/* Set the defaults for the globals */
:global.cg$query_mode := 'A';
-- default_value('A', 'GLOBAL.CG$QUERY_MODE');
/* Set the relations to the default query mode */
CGBS$.SET_RELATIONS( :GLOBAL.CG$QUERY_MODE );
/* Set the query mode items */
CGBS$SET_QUERY_MODE( :GLOBAL.CG$QUERY_MODE );
END;
END;
I posted it through metalink and I was told it must be regenerated through designer, and there is no way to do migration.

Hi,
actually you would upgrade the application sources from Forms 6i to Forms9i and then run teh Forms Migration Assistant for the clean up /this at least is my understanding after asking one of our Designer Product Managers).
Frank

Frm-41213 SO: Linux 64bits,Oracle Forms 10g Integration With Reports

Oracle Forms [32 bits] Versión 10.1.2.0.2 with Reports Fails. The Report Server Is Up, the file test.rdf its executed ok. but when a button have the next code. all its wrong.... helpme...
PROCEDURE REPORT IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('mireport');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_serverias_home_middle');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://miserver.dominio.com:7778/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rep_serverias_home_middle');
ELSE
message('Error when running report');
END IF;
END;
REPORTS_CLASSPATH and REPORTS_PATH seting Ok.
the next ist the default.env.
ORACLE_HOME=/oracle/products/middle
FORMS_PATH=/oracle/misaplications/modu01/lib:/oracle/misaplicationes/modu02/menus:/oracle/misaplicationes/modu01/images:/oracle/misaplicationes/modu01/icons:/oracle/misaplicationes/modu01/submod01/source:/oracle/misaplicationes/modu01/submod02/source:/oracle/misaplitaciones/modu01/submod03/source:/oracle/misaplitaciones/modu01/submod04/source:/oracle/misaplicationes/modu01/submod05/source:/oracle/misaplicaciones/modu01/submod07/source:/oracle/products10g/middle/forms
WEBUTIL_CONFIG=/oracle/products10g/middle/forms/server/webutil.cfg
LD_ASSUME_KERNEL=2.4.21-4.EL
CLASSPATH=/oracle/products10g/middle/forms/java/imagenes.jar:/oracle/products10g/middle/forms/webutil/frmwebutil.jar:/oracle/products10g/middle/forms/webutil/jacob.jar:/oracle/products10g/middle/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/oracle/products10g/middle/jlib/repository.jar:/oracle/products10g/middle/jlib/ldapjclnt10.jar:/oracle/products10g/middle/jlib/debugger.jar:/oracle/products10g/middle/jlib/ewt3.jar:/oracle/products10g/middle/jlib/share.jar:/oracle/products10g/middle/jlib/utj.jar:/oracle/products10g/middle/jlib/zrclient.jar:/oracle/products10g/middle/reports/jlib/rwrun.jar:/oracle/products10g/middle/forms/java/frmwebutil.jar:/oracle/products10g/middle/forms/java/frmall.jar
REPORTS_CLASSPATH=/oracle/products10g/middle/jlib/zrclient.jar:/oracle/products10g/middle/reports/jlib/rwrun.jar
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>/forms/server
the next ist the reports.sh.
ORACLE_HOME=/oracle/products10g/middle; export ORACLE_HOME
PATH=$ORACLE_HOME/jdk/bin:$ORACLE_HOME/bin:${PATH}; export PATH
TNS_ADMIN=$ORACLE_HOME/network/admin; export TNS_ADMIN
## TWO_TASK=< two task name >; export TWO_TASK
## ORACLE_SID=< ORACLE SID >; export ORACLE_SID
## setting for Reports Runtime
RW=$ORACLE_HOME/reports; export RW
REPORTS_PATH=$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo:/oracle/aplicaciones/sioper/geo/reports:$ORACLE_HOME/reports/integ:$ORACLE_HOME/reports/printers:${REPORTS_PATH}; export REPORTS_PATH
REPORTS_TMP=/tmp; export REPORTS_TMP
REPORTS_NO_DUMMY_PRINTER=TRUE; export REPORTS_NO_DUMMY_PRINTER
REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar; export REPORTS_TAGLIB_URI
REPORTS_CLASSPATH=$ORACLE_HOME/reports/jlib/rwbuilder.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/j2ee/home/oc4j.jar:$ORACLE_HOME/j2ee/home/lib/ojsp.jar; export REPORTS_CLASSPATH
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1; export NLS_LANG
## Icon variable for Solaris platform
TK_ICON=$ORACLE_HOME/reports/plugins/resource; export TK_ICON
#REPORTS_DEFAULT_DISPLAY=NO; export REPORTS_DEFAULT_DISPLAY

I thought I did, using batch=yes option. However, when running:
$ rwserver.sh server=repsrv
the pop-up window shows "Report Server is starting up". It does not change to "Report Server is ready".
Thanks

Oracle Forms loading slower with Sun JRE in Oracle E-Business Suite 11i

Hi,
After Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite 11i (Note 290807.1) we find that Oracle Forms are loading slower than using Jinitiator.
Also the PDF reports are opening in a minimized fashion. Meaning the PDF reports are opening correctly in new browser window (as expected) but is minimized.
Customer is not willing to go live with Sun JRE due to these issues.
Plz advice is there is any additional configuration I need to do.
Rgds,
Thiru

When the JRE was installed/configured on the workstations was the jar cache placed on a LAN drive instead of the local drive? We have experienced poor performance with both the JRE and Jinitiator when the Workstation Sysadmins configured the jar cache to be located on a LAN drive. Also is the size of the jar cache on the workstation sufficient to hold all of your required jar files. It could be downloading the jar files all the time.
Overall our performance with the JRE is comparible to the Jinitiator.
Sorry I have not experienced the problem that you are having with you pdf reports so I can't provide any comments on it.

How to know report server name in oracle forms and reports with weblogic server 10.3.5

Hello Experts, I am new in oracle forms and reports.I have installed Oracle forms 11g with weblogic server 10.3.5 at windows 7.Forms and reports are working well.But I want to call a report from an oracle form button press trigger. For This I need to know the my report server name which i dont know.Please tell me how can I know my report server name.

I want to call a report from an oracle form button press trigger. For This I need to know the my report server name
You can find the name of the standalone reports server in $ORACLE_INSTANCE/config/ReportsServerComponent.
Or you can use Fusion Middleware Control Console, normally at http://<machine name>:7001/em

Oracle forms 10g 32bit with Oracle 10g database on windows itanium for x64

Hi.....
Currently we are planning to have this configuration
1. Oracle10g RAC on HP rx6600 with windows itanium for x64 architecture
2. Oracle Application Server (32-bit) on windows 2003 (forms & reports services)
3. Application migrated from 6i to 10g
I have to things to ask about?
1.Will it be ok to connect from an application compiled with _(32-bit)_ 10g forms to a x64_ platform without problems ?
2. Can we connect forms and reports of developer 6i +(32-bit)+ to 10g RAC on x64_ platform if the character set is not UTF8 ?

1.Will it be ok to connect from an application compiled with (32-bit) 10g forms to a x64 platform without problems ?I did this also. A 32bit Oracle Form(10gR2) on Linux and a 64 bit (10gR2) database. And this works without a problem. Since you didn't mentioned your versions I would suggest you look for your combination if it is certified combination.
2. Can we connect forms and reports of developer 6i (32-bit) to 10g RAC on x64 platform if the character set is not UTF8 ?I don't know if the combination is certified. But regarding your character set, you have a character set setting (NLS_LANG, DEVELOPER_LANG, etc.. ) for your developer 6i, your database has it's own character set. Depending on those setting a conversion of the character set will take place between your developer 6i and the database, when you get and put data to the database. But like I said I don't know if developer 6i and 10g is still a supported combination.

Oracle Forms 11g SSO with OID and IAM

What versions of OID and Access Manager are required to get an Oracle Forms and Reports 11.1.1.2 application
on Weblogic 10.3.2 configured for Oracle SSO using OID authentication?
We want the OID to store and authenticate Users for username and password logins to the database, then
ultimately by user Certificate authentication in OID. I have OID 11.1.1.2 installed and SSO enabled for Forms
in Enterprise Manager.
Is Access Manager required for Forms SSO with OID authentication to work or just to allow user interaction
for registration and Password reset?
Things mention OAM 10.4.3 and others talk about IAM 11g for Forms 11.1.1.2 SSO to work with OID.
We did this back in Oracle Forms and OID 10g with JSP and LDAP to setup users but I understand 11g is
different and IAM can help or is required for this type of SSO to work.
Any help?
Edited by: Kirch on Apr 30, 2013 7:39 AM

Hi,
According to Oracle's certification matrix found at http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls, Oracle Forms 11.1.1.2 is not supported to use any Oracle Access Manager (OAM) version. OAM is a component of IAM. It is only supported with Oracle SSO 10.1.4.x. The best solution would be to upgrade the Forms and Reports environment to either 11gR2 (11.1.2.1) or to the latest 11gR1 patchset 11.1.1.7. Both versions are compatible with OAM 11.1.1.7.0 and OID 11.1.1.7.0 where only Forms 11gR2 (11.1.2.1) is compatible with OAM 11.1.2.0 and OID 11.1.1.7.0. That would be the best solution as we have ran into configuration problems in the past with using Oracle SSO 10.1.4.x.
Since OID 11.1.1.2.0 is already installed, you should be able to patch it up to 11.1.1.7.0.
For user authentication in OID, it is required to have OAM or Oracle SSO as both products use WebGate or mod_osso agents for authentication and authorization. For purposes of allowing end users to register accounts and password reset, you will either need to also install another IAM component called Oracle Identity Manager (OIM) or create a customized SSO login page that can be coded to perform these actions. I believe there are some examples available on the Internet.
Thanks,
Scott
http://pitss.com/us

Can I use Oracle Forms Services 11g with Database 9.2.0.8.0?

Hi everyone.
My department is evaluating development tools in order to build new web applications, and also possibly to migrate current applications buit with Oracle Forms 6.0.5.34.0. Our database is Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit.
We have read that the newest Oracle Forms version is Oracle Forms Services 11g. Is Oracle Forms Services 11g compatible with Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit? or would we have to migrate our RDBMS to Oracle 11g?
If our database is compatible, what would we need to develop and deploy applications with Oracle Forms Services 11g?
Many thanks in advance.

Wheter it's compatible or not: Database 9.2.0.8 is in sustaining support which means you won't get patches for it. So even if it is compatible I'd opt to upgrade to a newer version, as I wouldn't feel comfortable having a not-supported product out in production.
Have a look at the certification matrix for supported configurations
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
As for the requirements; most things can be found on the forms homepage on OTN:
http://www.oracle.com/technetwork/developer-tools/forms/
or at the documentation:
http://download.oracle.com/docs/cd/E17904_01/index.htm
cheers

Link between Oracle Forms(6i/9ids) with CRM on Demand

Can I connect oracle forms 6i or 9ids with CRM On Demand through web link or any other way? if yes how is it possible?

How you link Forms applications to other applications usually depends on what interface that 3rd party application exposes to Forms. For example, if functionality is exposed via a web service then Forms can quite easily call a web service. But the answer depends on how CRM exposes its functionality.
Regards
Grant

Error in reverse engineering with HSQL demo repositories

Hi Friends,
I’m getting the error while running the reverse engineering for any technology using with HSQL database.
Error as follows:
The technology or drivers does not support for reverse engineering.
java.sql.SQLException: Unique constraint violation: in statement [insert into SNP_COL (BYTES,CHECK_FLOW,CHECK_STAT,COL_DEC_SEP,I_TXT_COL_DESC,COL_FORMAT,COL_HEADING,COL_MANDATORY,COL_NAME,COL_NULL_IF_ERR,DEF_VALUE,EXT_VERSION,FILE_POS,FIRST_DATE,FIRST_USER,IND_CHANGE,IND_IN,IND_OUT,IND_WRITE,INT_VERSION,I_COL,I_SRC_COL,I_TABLE,LAST_DATE,LAST_USER,LONGC,POS,REC_CODE_LIST,SCALEC,SCD_COL_TYPE,SOURCE_DT,IND_WS_INSERT,IND_WS_SELECT,IND_WS_UPDATE) values (?,?,?,?,?,?,?,?,?,?,?,?,?,NOW(),'SUPERVISOR',?,?,?,?,?,?,?,?,NOW(),'SUPERVISOR',?,?,?,?,?,?,?,?,?)]
Can any one tell me the reason for it.It is very urgent issue for me.
Thanks in advance.
Regards,
Giri

My earlier error was due to authorization from sap side.
Edited by: Drona on Mar 18, 2012 6:22 PM

Security Exception in Oracle Forms when using with JRE.

Hi,
I am am getting an exception whenl I try to dispose a message box(FWindow) received as a popup from an Oracle form page(configured using JRE).
When I hit over the OK/Cancel button to dispose off the messagebox,it is not I get the following error.
Exception in thread "AWT-EventQueue-2" java.lang.SecurityException: this KeyboardFocusManager is not installed in the current thread's context
     at java.awt.KeyboardFocusManager.getGlobalFocusOwner(Unknown Source)
     at java.awt.KeyboardFocusManager.processSynchronousLightweightTransfer(Unknown Source)
     at sun.awt.windows.WComponentPeer.processSynchronousLightweightTransfer(Native Method)
     at sun.awt.windows.WComponentPeer.requestFocus(Unknown Source)
     at java.awt.Component.requestFocusHelper(Unknown Source)
     at java.awt.Component.requestFocusHelper(Unknown Source)
     at java.awt.Component.requestFocus(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.requestFocus(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMousePressed(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp.mousePressed(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I am able to dispose the messagebox, when I configure the oracle form with Jinitiator, the issue happens only with JRE.
These are the configurations I use.
10g Release2
Windows XP Professional Version 2002, Service Pack 3
IE version 6.0.2900.5512.xpsp_sp3_gdr.090804-1435
JInit-JInitiator 1.3.1.22, Sun JRE- 1.6.0_17
I am working on Developer suite.
Privilege: Windows Administrator
Kindly guide.
Thanks & Regards
Sunil

Hi Sunil,
Did you ever find a fix for this problem?
I'm having exactly the same issue.
I have an oracle form with a java bean that runs against J Initiator 1.3.1.28, and it works fine, with J Initiator. The java code was compiled against JDK 1.3.
My form now uses the Sun JRE 1.6, update 16. I've recompiled the java code against JDK 1.6.
And now when the java code sends an event to the form and I show an alert I get the same error you were getting:
Exception in thread "AWT-EventQueue-2" java.lang.SecurityException: this KeyboardFocusManager is not installed in the current thread's context.
I recompiled the java code against JDK 1.3, and ran it through the Sun JVM 1.6, and I still get the error.
Any idea how to fix this?
Regards,
Chris.

Oracle forms and reports with object views in oracle 9i

Can We use oracle 9i Object Views in oracle forms and reports. If yes, then which version?

MichaelFerrante,Thank you for your help.
I have already used the HS services to connecto to external databases from our main Oracle database, and the solution works fine.
But unfortunally for this particular client he cannont have installed a Oracle database due to internal policies restrictions.
I can not migrate the full application to another technology like ADF in less than 6 or 8 months.
Do you thifnk that there is any other solution?
Mensagem editada por: user10660669

Oracle Forms Reverse Engineering with designer

Similar Messages

Maybe you are looking for