Oracle Forms Server Service cannot start by scripts (windows2k)

We have a Portal & Application Server installed (Forms&Reports 6i).
Server is Windows2000.
I have to start Oracle Forms Server service by scripts, when i manually start the process by pressing start or stop, it works & asks for nothing.
but when i write a script to stop & start oracle forms server , it stops by script.
but it fails to start & says FRM-60009 : ifsvr60 correct usage : -install [service name] exc..... so service doesnt start but when i go to services & start it manually by presing start , it starts. I dont want to install a new service just stop & start the engine.
How can i start the forms server service by a script ? (any of known commands or a way to Oracle forms server service to start by scripts ?)
Thx for Help..

Hi
Have you checked that the rpd file still exists in the Repository folder? Did you leave it in a consistent state? assuming the paint.rpd is still there, double click it and see if you can open it, if so run a consistency check.
Rgds
Ed

Similar Messages

Oracle Management Server Service not starting

OS: windows 2000 Server
Ora version: 8.1.7
I have checked all the services are started and database is up but when i am trying to start OMS service "oemctrl start oms" its giving the message..
... service could not be started
... the service did not return an error.
please tell me whats the solution.

I have this problem too. (posted a separate thread on
this before I read this one, sorry).
Here is my oms.nohup:
E:\oracle\ora81\sysman\log>tail -f oms.nohup
[main][2003-10-9:18:7:57:599] ORA-01017: invalid
username/password; logon denie
d
: ..../....@jdbc:oracle:oci8:@exorabsp
[main][2003-10-9:18:7:57:599]
VdbSession.processError: invalid connect string
VXA-2018 :
Anmeldung bei OMS-Registrierungsdienst nicht m�glich
oracle.sysman.vxn.VxnBootstrapException:
at
at
at
t
oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
er.java:1353)
at
at
at
t
oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
547)
Fehler beim Hochfahren von Oracle Management Server.
Somehow, by reading the responses here - created new repository - I managed to get OMS working again.

Automate the database and forms / reports services to start on windows 2008 server R2 startup

Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:

Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH

Could not start the Oracle Forms Server

I am using Windows 2000 Professional
The Oracle Forms Server [Forms60Server] service failed to start due to the following error:
Access is denied.
Event ID: 7000
Source: Service Control Manager
Description: Could not start the Oracle Forms Server [Form60Server] service on a Local Computer.
Error 0005: Access is Denied

Description:
I Installed Oracle Forms6i and when i tried to run web test form I got this :
Event Type:     Information
Event Source:     Application Popup
Event Category:     None
Event ID:     26
Description:
Application popup: ifcgi60.exe - Unable To Locate DLL : The dynamic link library D2LA60.dll could not be found in the specified path C:\orant\tools\web60\cgi;.;C:\WINNT\System32;C:\WINNT\system;C:\WINNT;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem.
this missed file already exist in <Oracle Home>\Bin
directory, and if I copied it to the asked destination
it asks for more CORE40.dll and NLSRTL33.dll
and then those also copied then the screen disappears
Question : Why did this error occur, what went wrong
and how do I fix this problem
2)the other question is in Forms9iDS Version 9.0.2.7.0 I am getting this error
Event Type:     Error
Event Source:     Service Control Manager
Event Category:     None
Event ID:     7000
Description:
The OracleOraHome9iAgent service failed to start due to the following error:
Access is denied.
FRM-92060 :Failed to connect to the server
Bad machine specification :/forms90/190servlet:-1
Any Suggestion will be appreciated

Can't start Oracle BI Server service after uploadingo RPD

Hi,
I have just installed OBIEE 11g and I have some problems, or I don't know fine 11g version :-)
ONLINE RPD
1) It response with UNKNOWN ERROR in case I would like to add new DATABASE in Physical Layer;
2) The consistency check fail with nQSerror: 37005 Transactional Update Failed
OFFLINE RPD
I deploy without problem, but after uploaded RPD on line and I do start and stop with opmnctl command, the Oracle BI server service still Down ad not Alive. Other services still Alive.
The RPD chek consistency response without error!!!
Please can you help me???
Thx
GIUSEPPE CONZO

The entire file log message is:
//# Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
//# VERSION 1
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-22 11:13:30.142
//# SAVED : 2012-08-22 15:45:03.896
//# END SESSION ChangeLogTimeStamp:2012-08-22 15:45:04.554
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-22 15:51:10.183
//# SAVED : 2012-08-23 09:08:16.877
//# END SESSION ChangeLogTimeStamp:2012-08-23 09:08:19.911
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 09:10:33.007
//# SAVED : 2012-08-23 10:03:51.001
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:03:51.563
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:04:26.237
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:04:37.229
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:05:24.176
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:08:30.691
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:08:45.497
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:08:50.313
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:17:05.808
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:17:11.193
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:20:53.579
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:21:45.639
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:22:33.292
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:22:38.474
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:26:02.480
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:26:10.252
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:36.411
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:42.221
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:57.728
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:29:50.166
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:30:08.406
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:30:13.433
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:35:06.181
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:35:12.237
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:36:52.816
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:49:15.696
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:50:17.050
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:50:22.617
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:52:19.294
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:54:52.161
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:59:48.588
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:03:35.447
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:04:46.787
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:21:09.629
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:21:27.020
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:25:23.819
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:30:03.133
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:35:25.779
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:35:57.415
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:50:50.490
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:51:08.165
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:52:21.261
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:52:36.061
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:53:52.961
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:56:02.026
//# END SESSION ChangeLogTimeStamp:2012-08-23 12:16:59.915
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:11.915
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:18.767
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:34.227
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:52:33.344

How to improve performance of Oracle Forms Server ?

Recently we converted our Application which was Developed in Forms 5.0 and Reports 3.0 into Forms6i to host that on to Web. We also loaded ORACLE 9iAS (on Windows NT 4 with service pack 3) from "Enterprise Edition" option by selecting Oracle Database Cache, Forms Server and Reports Server, HTTP Server(on port 80),Oracle Web Cache. Everything loaded succesfully including Caches.
Forms server is working perfectly and we were able to run our Application in Browser, but performance is the issue. We thought the caches will improve the performance, but it seems they are not at all working. When we run a report or form the Database cache is not giving any statistics whether a particular Query is a Hit or Miss though the cache is running. We got a doubt and searched in FAQ's and we found the following questions.
Oracle9iAS Web Cache Frequently Asked
Questions February 2001
Does Oracle9iAS Web Cache work with applications that use Oracle9iAS Forms?
Not in the 1.x release of Oracle9iAS. Integration between Oracle9iAS Web Cache and Oracle9iAS Forms will be addressed at a future date.
Oracle9iAS Database Cache
Does the Cache work with Oracle Forms and Portal in Oracle9i AS?
Since Oracle Forms and Portal utilize read/write PL/SQL stored procedures, these components cannot take advantage of the Cache. This support is being considered for a future version.
After coming to know that Caches doesnot boost the performance of Oracle Forms and reports. We have the following queries.
1) Clarify whether the above are True.
2) Apart from DB and Web Cache is there any other way where in we can improve the performance of Oracle Forms and Reports in Forms Server including the start up time.
3) What is the ideal configuration required for each tier (iAS Server,Database Server and Client) to host Forms on to Web considering our application as Medium scale.
(Presently our configuration are,
Application Server Configuration : Windows NT 4 with service pack 3,256 MB RAM,1 GB Virtual memory and 4GB free space and almost the same configuration is being used for
Database Configuration.
Client Configuration : Windows 98 with 64MB RAM).
4) Is there any way to track the performance and know the problem areas like TRACE.
Gopi Kumar
null

A couple of questions for you:
1) What version of IAS are you using?
2) What's the version of Forms&Reports and
3) What version of patch are you using if any
for forms&Reports?
4) What applications are you running on the
machine where Forms&Reports is installed?
(I mean non-Oracle applications?)
The problem could be that, the base addresses
of the DLL's in Forms&Reports could be having base address conflicts with some other application's DLL's.
Forms and Reports needs to be fully rebased to achieve full performance on NT. Before release of Forms and Reports, Oracle rebases all DLLs. Rebasing assigns unique base addresses to all of the DLL's in use by an executable. A properly based DLL will load at its preferred base address, greatly improving the efficiency of memory utilization and the runtime performance of the executable.
Multiple utilities are available on NT to verify proper rebasing of DLLs. HandleEx v4.0 is one such freeware from Sysinternals and is available at www.sysinternals.com. Some others are "depends.exe" that's part of the MS Visual Studio or msinfo32.exe that comes with Office 2000 on NT.
If after running any of these utilities you discover that the DLL's ar not properly rebased, you need to contact Oracle worldwide support.
If you find that rebasing is not the problem, then please post your feedback again. Hope this helps.

CSS keepalives for Oracle forms server

I'm trying to set up load balancing for oracle forms server and having issues with finding working keepalive method.
If I use uri keepalive, Oracle forms server crashes within a couple of minuites. TCP doesn't work either
service Ora-forms:9000
ip address 192.168.0.34
port 9000
keepalive type http
keepalive uri "/alive.gif"
keepalive frequency 30
It works for Oracle web server tho.
What keepalive do you guy use for Forms server?

Here is what a script looks like using the "graceful" close approach..Graceful is at the bottom.
Regards
Pete..
!no echo
! Filename: ap-kal-fin
! Parameters: ip address
! Description:
! This script will open and close a socket on port 80.
! The close will be a FIN rather than a RST
! Failure Upon:
! Not establishing a connection with the host.
! Make sure the user has a qualified number of arguments
if ${ARGS}[#] "LT" "1"
echo "Usage: ap-kal-fin ip address.'"
exit script 1
endbranch
! Connect to the remote Host
set EXIT_MSG "Connect: Failed to connect to ${ARGS}[1]"
socket connect host ${ARGS}[1] port 80 tcp 2000
no set EXIT_MSG
socket disconnect ${SOCKET} graceful
exit script 0

Oracle BI server could not start

Hi All,
when am trying to start oracle BI server .its thoughing below error
Error 1064:An eceception occurred in the service when handling the control request.

Hi,
Earliear i have face the same issue,The repository was opened in online mode and became not consistent. After this I noticed that my Answers to this repository didn't executes. I tried to restart the Oracle BI Server service but it fails with 1064.
Solution for me was to remove a link to damaged repository from NQConfig.ini, restart the presentation server and correct inconsistencies in repository in offline mode.
if you did any changes in Scheduler also will get the same kind of error
then first check that the Scheduler has been properly configured to access the repository where it stores its data.
-->Open the “Job Manager” from the “Oracle Business Intelligence” menu and then navigate to “File => Configuration Options”. Make sure that all the following fields have valid values: “Database Type”, “Call Interface”, “Data Source Name”, “Username”, and “Password”. When the Scheduler attempts to start-up, it first verifies that it can connect to the repository, and if it cannot (because, for example, the “Data Source Name” does not refer to a valid entry in the “tnsnames.ora” file), then you’ll get the error message listed above. By way of confirmation, verify that you can connect to the repository using the configuration data by other means, such as by using SQL*Plus.
Thanks
Deva
Edited by: Devarasu on Sep 22, 2011 2:24 PM

OBIEE 11g opmnctl services cannot start (ping failed in ready callback)

Hi,
The BI server is up and running
The platform is Linux, searching forums it's due to /etc/hosts and it is defined as
127.0.0.1 localhost.localdomain localhost
127.0.0.1 <servername>.<domain> <servername>
All OPMN services cannot start with error messages (ping failed in ready callback).
Any idea is highly appreciated !!!
Thanks.

Hi,
Make sure static ip r u using? If u used to installed dynamic
Ip it throw this kind off issue . I have face this same issue in obiee11.1.1.3 with dynamic ip address
Note: u shoud use static ip ( configure look back adopter )
Thanks
Deva

How to install downloaded Oracle Forms Developer/Services 6i Release 2 for linux

Hi folks,
I downloaded d2k6irelease2.tar (Oracle Forms Developer/Services 6i Release
2 for linux) from
http://otn.oracle.com/software/products/forms/htdocs/linuxsoft.html
I untar the file on my linux machine however the extracted files don't
seem to contain any installing program. I didn't find products.jar in the
files and there are no script to install the software. I read the attached
doc, however it only assumes that the installation is from CD-ROM. The doc
doesn't help anything for this downloaded software. I wonder if anyone
here know how to install it. Thank you so much.
Best regards,
Kai Huang

There should be a text based installer in the /orainst sub-
directory
In that directory, just run the script:
./orainst
The installer seems to require libXm.a, which wasn't included in
my RH 7.1 installation, so I had to install the motif-
development libraries before the full install would complete
successfully.

Oracle Fulfillment server does not start and also my concurrent manager is

The oracle Fulfillment server does not start and also my concurrent manager is down, when ever iam trying to start them i getting error.
even i restarted my laptop many times
Iam using WINXP on my laptop.
Pls help someone
hsawwan
Posts: 11,859
Registered: 03/13/06
Re: oracle Fulfillment server and concurrent manager problem
Posted: Oct 13, 2008 9:26 AM in response to: user578071 Reply
What is the error?
What does CM log file say?
Please run cmclean.sql and try to start the CM then.
Note: 134007.1 - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1
where should i run in apps schema or some other schema, where can i find the log
as iam using r12

Duplicate thread ..
oracle Fulfillment server and concurrent manager problem
Re: oracle Fulfillment server and concurrent manager problem

Need Help on Oracle BI Server Service

Hi there,
I would need help on to start Oracle BI Server service start.
I have installed OBIEE 10.1.3.4 version and I've been working on creating repository and creating Answers & Dashboards etc..,
Today, I was working on to point other repository in NQSConfig.INI file and when I tried to Start Oracle BI Server Service I get below error:
" *Could not start the Oracle BI Server service on Local Computer*
*Error 1064 An exception occurred in the service when handling the control request*"
It's been working, just I got this error today only, all other services are working fine.
Has anyone got this error?
Any help would be greatly appreciated.
Thank you
Skat
Edited by: Skat on Nov 10, 2009 8:07 PM

Hi All,
Thank you so much for all your quick replies and it worked now.
You are right, I changed repo name and changed back to original one and and Service is starting now.
I think something missing space or format issue when I add other entry in the NQSconfig.INI file, Ihave to follow same synatx.
Now I am good to go.
Thanks again,
skat

Using Oracle Forms Developer/Services 6i Release 2 with Oracle 9i

Hello,
I am trying to load Oracle Forms Developer/Services 6i Release 2 for Windows 95/98/NT/2000/XP with already installed Oracle 9i , I am able to use all the applications installed with 9i database but I am not able to use Forms with it, Please let me know if any of you have any thoughts or Idea around this, Also please let me know what version of Forms & Reports will go with Oracel 9i Database.
Thanks,
Ripal Patel

Thank you for you postings - The Member Feedback forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions cannot be answered. However we recommend that you post this thread to the "Forms" forum.
The URL is: Forms
Thanks - The OTN team

Oracle Forms Developer/Services 6i Release 2

Hi folks,
I downloaded d2k6irelease2.tar (Oracle Forms Developer/Services 6i Release
2 for linux) fromhttp://otn.oracle.com/software/products/forms/htdocs/linuxsoft.html
I untar the file on my linux machine however the extracted files don't
seem to contain any installing program. I didn't find products.jar in the
files and there are no script to install the software. I read the attached
doc, however it only assumes that the installation is from CD-ROM. The doc
doesn't help anything for this downloaded software. I wonder if anyone
here know how to install it. Thank you so much.
Best regards,
Slim

Hi,
First use gunzip utility to unzip .gz file. Once you are done, you will get a .tar file. Use tar -xvf to untar the file to a directory. It is similar to unzip.
Regards,
Arun

Oracle Management Server Service not created

Hello,
I created a Management Server Repository using OEMCA and an existing SID. According to the details displayed at the end of the wizard I assume that the process was finished successfully:
(NT-Service OracleOraHome81 ManagementServer is started...
Disconnect from oms@instancename....
Returning to connection system@instancename...
Process finished.
Yet the Oracle Management Server Service can not be found in SERVICES in the control panel...and therefore can't be started manually.
I have OS-Administrator Privileges.
I use Oracle 8.1.7 on WinNT.
Any help would be greatly appreciated.
Thanx
Stefan

I have this problem too. (posted a separate thread on
this before I read this one, sorry).
Here is my oms.nohup:
E:\oracle\ora81\sysman\log>tail -f oms.nohup
[main][2003-10-9:18:7:57:599] ORA-01017: invalid
username/password; logon denie
d
: ..../....@jdbc:oracle:oci8:@exorabsp
[main][2003-10-9:18:7:57:599]
VdbSession.processError: invalid connect string
VXA-2018 :
Anmeldung bei OMS-Registrierungsdienst nicht m�glich
oracle.sysman.vxn.VxnBootstrapException:
at
at
at
t
oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
er.java:1353)
at
at
at
t
oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
547)
Fehler beim Hochfahren von Oracle Management Server.
Somehow, by reading the responses here - created new repository - I managed to get OMS working again.

Oracle Forms Server Service cannot start by scripts (windows2k)

Similar Messages

Maybe you are looking for