Oracle Fussion Middleware Installation On Solaris10

I have some requirement to install oracle FMW on Solaris 10 x86. Can someone please share the steps for installation on solaris?

Hi Gavin,
Thanks for your reply,
My basic requirement is to install oracle web logic server 11g, oracle SOA suite and oracle EM on Solaris x86 platform.
Thanks~

Similar Messages

  • Unable to create ASInstance while configuring Oracle Fussion Middleware

    Hi,
    I installed the Oracle Fusion Middleware 11g on my XP, while configuring (running the config.bat file), I'm getting an error when trying to create the ASInstance.
    I did the following and I'm still not able to create an ASInstance :
    - uninstalled and installed the weblogic server and Oracle Fusion Middleware and retried the configuration procedure.
    - used the opmnctl tool to start the ASInstance i got the following error opmnctl : ORACLE_INSTANCE not set
    - made sure that the MSVCR71.dll is available in the system & system32 folder
    Please can anyone help to solve this problem so i can continue the Oracle Fusion Middleware configuration procedure ?
    Thanks in advance

    This is the error that's found in the log file hope it helps:
    Failed to start component emagent_asinst_1[[
    oracle.as.config.ProvisionException: HTTP status code = 204 : 0 of 1 processes started.
         at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:942)
         at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1061)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:133)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    [2011-05-27T11:05:11.765+03:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000J0kQ^HGFO9WFLzjO8A1DrpJB000006,0] Status of component false
    [2011-05-27T11:05:11.765+03:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000J0kQ^HGFO9WFLzjO8A1DrpJB000006,0] [[
    oracle.as.config.ProvisionException: Failed to start the component
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:137)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    [2011-05-27T11:05:11.765+03:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000J0kQ^HGFO9WFLzjO8A1DrpJB000006,0] [[
    oracle.as.provisioning.engine.CfgWorkflowException
         at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:368)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.util.ConfigException:
    Error creating ASComponent emagent_asinst_1.
    Cause:
    An internal operation has failed: Failed to start the component
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:414)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
         ... 17 more
    Caused by: oracle.as.config.ProvisionException: Failed to start the component
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:137)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
         ... 18 more
    ]]

  • Looking For Oracle Fusion Middleware Repository Creation Utility

    I'm trying to install a development Fusion Middleware 11.1.1.7 (Weblogic, BPM, etc) environment in a Windows Virtual Box VM. I'm following the directions in the following document: Oracle Fusion Middleware Download, Installation, and Configuration ReadMe. I've installed Oracle 11G r2 and am on the step for using the "Oracle Fusion Middleware Repository Creation Utility". I have looked high and low and can't find this utility on the Oracle web site. Can someone PLEASE point me to the location so I can download it.

    Actually it is delivered on Edelivery and as a Patch on MOS:
    Oracle® Fusion Middleware Download, Installation, and Configuration ReadMe
    5.2 Downloading the Oracle Fusion Middleware Repository Creation Utility
    You use the Oracle Fusion Middleware Repository Creation Utility to install the database schemas that are required by specific Oracle Fusion Middleware products.
    For Oracle Fusion Middleware 11g Release 1 (11.1.1.7.0), download one of the following:
        Repository Creation Utility 11g Release 1 (11.1.1.7.0) from OTN or Oracle Software Delivery Cloud
        Patch 16471709 (for Windows and Linux 32-bit systems) from My Oracle Support

  • Oracle Fusion Middleware 11G  B2B Document Type not getting Identified

    Hello,
    I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
    I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
    My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
    The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
    I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
    kindly help to resolve this issue.
    Thanks & Regards
    Hiteshkumar Chaudhary

    Hi Hitesh,
    i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
    %FROM_PARTY%
    %TO_PARTY%
    %DOCTYPE_NAME%
    %DOCTYPE_REVISION%
    %MSG_ID%
    %TIMESTAMP%
    These file name formats can be used in any combination; for example,
    %TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
    Note - Any file extension is allowed.
    what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
    how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
    Regards,
    Anuj
    Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

  • Install Oracle Fusion Middleware Forms and Reports Services 11g

    Hi,
    I m looking for the installation steps for the oracle fusion middleware 11g forms and reports services only, on the Windows server 2003
    Can anyone help me to download and install the OFM.
    Thanks

    Hello,
    Here you have the installation guide for Forms&Reports11gR2:
    http://docs.oracle.com/cd/E24269_01/doc.11120/e23960/install.htm
    and if you want to download it you can download it from here:
    http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html
    Hope it helps you :)
    Regards
    Carlos

  • Oracle Application Server 10g/Oracle Fusion Middleware 11g

    Hi folks, This question related to migration/upgrade of Oracle Application Server infrastructure.
    I see that the Oracle has come up with Oracle Fusion Middleware 11g. Is it the next release of Oracle Application Server 10g. I have the following questions. Appreciate if any one can provide answers to the following questions. Please correct me if my understanding of these oracle products is not right! Thanks
    1. What is the future of Oracle Application Server?
    2. Is it Oracle Fusion Middleware(OFM) 11g is the upgrade path if one need
    to upgrade?
    3. Is it expected that expected that customers need(if require) to move to OFM 11g?
    4. Does OFM 10g comes with Oracle Application Server? If not what does
    it comes with?
    5. If it does not, what about customers having applications built using oracle forms and reports? Does OFG 11g
    support Oracle forms and reports?
    I understand that OFM 10g comes with Oracle web logic server!
    Thanks in advance.
    movva

    To run Forms and Reports in Oracle Fusion Middleware 11g you have to use the distribution "Portal, Forms, Reports and Discoverer" in the FMW 11g software pack.
    The structure of what we used to call "the application server" has changed a bit however, in the following way:
    - In 11g you need to install the Javaserver WebLogic software (version 10.3.3 for the current Forms 11g version 11.1.1.3) first.
    In 10g the installation of the Javaserver (OC4J) was part of the App server install.
    Note that you just have to install the software, the configuration script for creating a Forms app server instance creates the WebLogic domain (comparable with the OC4J instance) for you.
    - In 11g the Fusion Middleware software installation is separate from the creation of an application server instance.
    This is more convenient and comparable to Oracle database and Weblogic installation.
    - The Fusion Middleware Configuration script installs two parts of the product: 1. A WebLogic Domain. 2. A Fusion Middleware instance.
    The first contains everything related to Java, such as the servlet configuration file (formsweb.cfg), while the latter contains everything that has less to do with the Javaserver
    - No more Infrastructure server
    The Infrastructure server does not exist anymore. If you want to use Single Sign On with Forms/Reports 11g you can install Identity Management 10.1.4.3 (or use Identity Management 11g, and configure separately the 10.1.4.3 Single Sign On) or keep your old 10g Infrastructure installation.
    During installation you just have to specify you want to use OID and SSO and it configures out of the box.
    Under normal circumstances the same licenses apply to 10g and 11g (as long as you do not use WebLogic for other purposes).

  • Oracle Forms 11g Installation. Create domain problem

    Hi,
    I am installing Oracle Forms 11g on Windows 7 32-bit system. Installation is done. Create domain is failing during the configuration process.
    I searched everywhere but cudnt find a solution specific to the problem.
    Only recognisable error message is 'CSF Entries will not be parsed since the AdminServer is unreachable'.
    I have checked Node Manager is not running.
    Please find below the snapshot of the last few lines of the log file
    [2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange]  [CONFIG PAGE] New Description: Application Configuration
    [2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange]  [CONFIG PAGE] Old Description: Application Configuration
    [2014-05-23T13:43:22.570+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_HOME_PATH) to:C:/Oracle/Middleware/user_projects/domains/ClassicDomain. Value obtained from:USER
    [2014-05-23T13:43:23.787+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
    [2014-05-23T13:43:27.297+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine.config] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Starting Action:Application Configuration
    [2014-05-23T13:43:27.297+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.classic.ca.standard.ClassicConfigMain] [SRC_METHOD: doExecute] ENTRY
    [2014-05-23T13:43:35.117+05:30] [as] [WARNING] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] CSF Entries will not be parsed since the AdminServer is unreachable
    [2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Executing a Jaxb workflow ...
    [2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
    [2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: ENTRY........
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@180874
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: 2........
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Set the Extion Id to START........
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Did the assignment...
    [2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: EXIT........
    [2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Domain Home: C:/Oracle/Middleware/user_projects/domains/ClassicDomain
    [2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Oracle Home: C:/Oracle/Middleware/Oracle_FRHome2
    [2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting os object values in Python
    [2014-05-23T13:44:18.861+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [[
    oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
    at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
    at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
    at java.lang.Thread.run(Thread.java:662)
    Any help is highly appreciated.

    Hi,
    Please run the below commands in the command prompt :-
    1)hostname
       Ex:-
           C:\Users>hostname
            celvpint8511
    2)nslookup <Result of the step 1>
       Ex :-  C:\Users>nslookup celvpint8511
                Server:         192.135.82.132
               Address:        192.135.82.132#53
               Name:   celvpint8511.us.oracle.com
               Address: 10.64.166.6 [ So this is the IP Address which needs to be used ]
    So please get the right IP and then update it in the host file.
    Regards,
    Prakash.

  • Installing Oracle Fusion Middleware (Forms/Reports) 11g on windows 2012 x64

    Hi All,
    I'm planning to install oracle fusion middleware 11g (forms/reports) on windows 2012 64 bit.
    Once i started the installation of weblog server 10.3.6 it went fine without any error at this stage.
    In second stage i tried to configure it, but in the configuration process "*Creating Domain*" is getting failed.
    Placed some sample message below from the log file.
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(CREATE_DOMAIN) to:false. Value obtained from:USER
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXTEND_DOMAIN) to:false. Value obtained from:USER
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXPAND_CLUSTER) to:false. Value obtained from:USER
    [2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid:
    [ecid: 0000KOYolfhCWr^pxSP5iW1JVQQa000003,0] Adding Element:CREATE_DOMAIN_ID for writing.
    Any help in the regard will be greatly appreciated.
    Thanks
    Syed

    Hi,
    1)As per certification matrix Forms and Reports 11.1.1.7.0 is supported on Windows 2012.
       So in order to install Forms and Reports you need to first install the Forms and Reports software binaries then need to run the config.sh command from %ORACLE_HOME%/bin.
       No need to create any domain using the config.sh from Weblogic home.
    2)Please see if the below prerequisites were met :-
       . Assign Proper ip, hostname & domain name
      . Entry of ip, host name & domain name in etc/hosts file
      . Disable anti-virus if any
      . Disable ipv6, a
      . Disable Windows Firewall, Windows Update & Windows Management Instrumentation at Service level (services.msc)
      . Create 2 folder "tmp" & "Java" for temp, jdk & jre installation. And set the path of installed jdk in Environment Variable
    Regards,
    Prakash.

  • Oracle service registry installation error

    I am getting installation error while trying to install Oracle Service Registry 11.1.1 on weblogic 11g....
    any suggestion.
    oracle.database.user=uddiuser
    install.windows.menu=Oracle Service Registry 11.1.1
    oracle.database.password=***
    [java] BUILD FAILED
    [java] C:\oracle\middleware\registry111\etc\setup\porting.xml:412: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\etc\setup\porting.xml:350: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:196: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:202: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:208: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:257: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:1031: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:788: The following error occurred while executing this line:
    [java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:774: Java returned: 1
    [java] Total time: 3 minutes 22 seconds
    Java returned: 1
    Installation failed. If accessible, see "C:\oracle\middleware\registry111\log\install.log".
    To correct installation parameters and resume installation click Recovery.
    .

    I have used the oracle's OSR installation guide. I beg to differ if OSR is really enterprise ready product.
    I dont think this is a specific problem with my installation. The point is that the installation logs is very poor to put it mildly.
    you get a sense that this product is developed by school student and is not an enterprise ready software.
    WebLogic Server Version: 10.3.4.0
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
    128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;;
    C:\Oracle\MIDDLE~1\ORACLE~2\lib\osb-server-modules-ref.jar;C:\Oracle\MIDDLE~1\pa
    tch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle
    \MIDDLE~1\patch_oepe1040\profiles\default\sys_manifest_classpath\weblogic_patch.
    jar;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sys_manifest_classpath\webl
    ogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSE
    RV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblo
    gic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.4.0.jar
    ;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\mod
    ules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-
    contrib.jar;C:\Oracle\Middleware\Oracle_OSB1\soa\modules\oracle.soa.common.adapt
    ers_11.1.1\oracle.soa.common.adapters.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\or
    acle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\ORACLE~2\lib\version.jar;C:\Oracle\MI
    DDLE~1\ORACLE~2\lib\alsb.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-ant.
    jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-common.jar;C:\Oracle\MIDDLE~1
    \ORACLE~2\3rdparty\lib\j2ssh-core.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j
    2ssh-dameon.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\classes;C:\Oracle\MIDDLE~1\
    ORACLE~2\lib\external\log4j_1.2.8.jar;C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D
    ~1\config\osb;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\
    Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\
    ext\QTJava.zip;C:\Program Files\Rational\ClearQuest\cqjni.jar
    PATH=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1
    \patch_oepe1040\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp360\profiles
    \default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
    DLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\
    MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle
    \product\10.2.0\server\bin;C:\Program Files\Java\jdk1.6.0_24\bin;C:\progra~1\ora
    cle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\
    1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Fil
    es\QuickTime\QTSystem\;C:\Program Files\Rational\common;C:\Program Files\Rationa
    l\ClearCase\bin;C:\Program Files\Cepstral\bin;C:\apache-maven-2.0.11\bin;C:\apac
    he-ant-1.8.2\bin;C:\Program Files\Enterprise Vault\EVClient\;C:\Oracle\MIDDLE~1\
    WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    Listening for transport dt_socket at address: 8453
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
    Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transpo
    rt=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx
    512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogi
    c.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
    ib\weblogic.policy -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea..
    . -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:co
    m.bea.sbconsole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\O
    racle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\s
    erver -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1
    -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -D
    domain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=C:\Or
    acle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.se
    rver.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\ser
    vers\AdminServer -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\
    BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1
    \domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE
    ~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jp
    s.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-confi
    g.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\ser
    vers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateT
    ypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracl
    e\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pk
    gs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.mana
    gement.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToCo
    nsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\sys
    ext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe1040\profiles\default\sysext
    manifestclasspath;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_mani
    fest_classpath weblogic.Server
    Listening for transport dt_socket at address: 8453
    <Apr 14, 2011 10:42:50 AM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ
    JCE Provider self-integrity check for better startup performance. To enable thi
    s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Apr 14, 2011 10:42:51 AM CDT> <Info> <Security> <BEA-090906> <Changing the defa
    ult Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl
    e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Apr 14, 2011 10:42:52 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting We
    bLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsys
    tems Inc.>
    Let me know if you need more information.
    Thanks

  • Difference between Oracle Fussion Middle ware and Oracle EBS

    Hi All,
    As i know Oracle Fussion Middle ware and Oracle EBS both are Oracle ERPs can anyone explain difference of these and technologies between them and explain in detail for Oracle Fussion.
    Thanks
    Rehan

    >
    well old way of development (Forms & Reports) will be obsolete in Oracle Fusion Middleware vs Oracle EBS
    >
    not quite true
    obsolete in fusion application but ofm has forms/reports 11 based on weblogic
    >
    well old way of development (Forms & Reports) will be obsolete in Oracle Fusion Middleware vs Oracle EBS, as it is based on Java, OAF and ADF.
    >
    not quite true
    fusion application doesn't use oaf. it's ebs related technology only

  • Oracle 11g forms installation

    Hi,
    I have installed the Oracle forms 11g on my machine and tested the test.fmx file and is running with out any problems. I have installed Oracle weblogic 10.3.2 and then downloaded the forms 11g version (4 zip files from oracle site) and installed only forms and reports components.
    When I am going through the forms deployment guide, in the documentation it is specified that the configuration files are located in *<DOMAIN_DIR>/servers/WLS_FORMS/stage/formsapp/11.1.1/formsapp/config* folder. But I am unable to find the configuration files in that folder. I can find the configuration files in the following folders.
    <DOMAIN_DIR>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config
    <DOMAIN_DIR>\servers\AdminServer\tmp\.appmergegen_1260317776409_formsapp.ear\config
    <DOMAIN_DIR>\servers\WLS_FORMS\tmp\_WL_user\formsapp_11.1.1\wb1h9e\config
    Can I assume *<DOMAIN_DIR>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config* folder is correct configuration folder for forms configuration.
    I did not find any error messages while the installation and also the test.fmx is running with out any problems. Could you please advise about the correct configration if the configuration files are not correct.
    Thanks and Regards,
    S R Prasad

    hi
    u have to do something like this.
    Perform the below steps to install Oracle Forms 11g and forms services on Windows.
    - Download Oracle Weblogic server (Navigation: otn.oracle.com > downloads > Middleware: Weblogic server )
    - Download Oracle Forms, Reports and Discoverer (Navigation: otn.oracle.com > Downloads > Middleware: Oracle Fusion Middleware 11gR1)
    - Extract the two files Disk1_1of2 and ..disk1_2of2 and it creates disk directories (disk1, disk2, disk3 and disk4).
    - Double click the setup.exe in the root of the disk1 folder.
    - Click install and configure.
    - The installer checks for System pre-requisites.
    - Choose the Oracle Middleware location. This is where I installed the middleware home of Jdeveloper 11g
    - Select Oracle Forms and Reports including the correct server components. And after accepting the defaults in the following steps choose [Finish] and the installation starts.
    - The installer installs a one- off patch and then starts the configuration.
    - Add TNS entry for the instance in tnsnames.ora under ([HOME_DRIVE]:\Oracle\Middleware\asinst_1)
    - The forms builder can be accessed from the following menu (Start > Programs > Oracle classic instance > Developer tools > Forms Builder.)sarah

  • Installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g

    Hi All,
    I am installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g. The installation issue in creating an OID "start Oracle Internet Directory" was resolved. However, when I am installing OAM identity server it asked for the Configuration DN and Searchbase. I tried to enter dc="myCompany" as Config DN and Searchbase it did not accept. I was really stuck in my installation.
    How will I check my searchbase and configdn in Fusion Middleware 11g?
    Your help is very much appreciated. I need this ASAP.
    thanks.

    The product configuration DN is the node into which the product meta-data will be stored.
    If your root suffix is dc=abc,dc=com it is considered best practice to define another node such as ou=apps.
    The product will create o=oblix under the configuration DN.
    I mention this in many of my responses on this forum: If you are trying to get going with OAM without training or professional help, you will find it a tough road. Get some training or bring in someone who knows the product.
    Mark

  • Problem Oracle 10g database Installation on Windows 2003 Server

    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad Shoaib

    898118 wrote:
    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

  • Oracle 9i R2 Installation on RH Linux 7.3 -- Have a few questions.

    Hello,
    I am at the end of the Oracle 9i R2 installation and have a few questions.
    1) The "Agent Configuration Assistant" keeps failing. I get the following message.
    Parameters "orahome" = /opt/oracle/product/9.2.0
    Parameters "nodeinfo" = NODE_VALUE
    Agent Service Failed
    What does this mean and how can I complete Agent Configuration Assistant install?
    2) I completed the Oracle Database Configuration Assistant successfully and created passwords for sys and sysoper (not sure if these were the exact users). Note I did not modify any other users or unlock them.
    How do I log into the sqlplus prompt, what users should I use and how can I create new users and databases?
    Thanks for your help in advance.
    Regards,
    Chris Barone
    [email protected]

    (1) You can probably just ignore the Agent Configuration (are you using the Agent to collect data?)
    (2) sqlplus '/ as sysdba' will log you into the SQL*Plus prompt.
    Rob

  • Oracle 10g R2 installation on sun solaris 10 Sparc machine

    Hi there,
    I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
    Error encountered:
    Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    The following were the steps taken before encountering the above error
    1. logged into a workstation
    2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
    3. keyed in the following at the command prompt
    DISPLAY=machine_name:0.0; export DISPLAY
    4. executed the following from the command prompt
    ./runInstaller
    Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
    Please help me with this problem.
    Thank you
    Ravindran Kanniah

    It is because of UNIX shell. I also faced this error during installation.
    First check your shell by the following command.
    $ echo $SHELL
    Then select the below.
    For csh shell
    $ setenv DISPLAY 192.168.1.128:0.0
    $ export DISPLAY
    For sh,ksh and bash
    $ DISPLAY=192.168.1.128:0.0
    $ export DISPLAY
    After you do this check the value of DISPLAY variable.
    $ echo $DISPLAY
    If the DISPLAY variable is set then run ./runInstaller.
    One advice: Keep a complete log of your terminal session. This will help you in future :)
    -aijaz

Maybe you are looking for

  • Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

    Hi All, I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE: Goods movement not possible with mvmt type 601 Can anyone suggest me what will be the solution for it? Regards, Raghuraman.k

  • IW31-Create Purchase Requisition automatically from PM order - Release 5.0

    Dear Experts, Currently we are working in the 4.6C Release but we are doing the migration for 5.0. In PM, in the 4.6C release when we create a PM Order in tcode IW31 we select a component and the system shows us the screen to inform the quantity and

  • Why can't I delete this audio clip or unlink it?

    Please see uploaded screenshot.  The soundtrack here is a continuous clip of music but I have snipped it to coincided exactly with the video clip above, and I've also snipped the Audio 1 clip at the same place.  There's nothing above, ie all other tr

  • Problem with currency fields in alv while editing

    hi guys, while creating the editable fields and saving the data in database i have problem with currency(price fields), when iam entering 10000 it is storing as 100.00 in database but i want to store it as 10,000.00 can any one help me .... it is urg

  • MacBook Pro will not shutdown with external HD Screen

    I have been working with the same configuration for over a year with no problems. I have an external 20" HD screen that I use with my MacBook Pro (cover of mbp is closed not dual screen use) and an external keyboard and mighty mouse. Ever since upgra