Oracle installation problem on linux

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Try setting the LD_ASSUME_KERNEL=2.2.5 environment variable before you run the installer.
I needed to do this to get the 8.1.7 installer running on RedHat 7.1 and 7.2.
Scott
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Similar Messages

Installation problem on Linux Slackware 7.1 (Oracle 8i)

I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
and put in PATH --> /usr/local/jre/bin
Nothing work's.
Somebody can help me ?????
Thank's ....

Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null

Installation problem in Linux Slackware 7.1

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
Nothing work's.
Somebody can help me ?????
Thank's ....

Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null

Oracle Installer Problem while installing Oracle 9i on HP Unix

Hi Everyone ,
I had earlier installed 9.2.0.1 on Linux and had no probs whatsoever . When i am trying to install Oracle 9.2.0.1 on HP Unix , the Oracle Installer opens up a window saying CHOOSE JDK HOME DIRECTORY . I have already set the PATH environment variable to point to /opt/java1.4 and /opt/java1.4/jre/bin and also JAVA_HOME to point to /opt/java1.4 . Even after trying to put the directory information it refuses to go thru giving the Error INVALID JDK HOME.PLEASE ENTER CORRECT JDK LOCATION.
Any replies would be greatly appreciated
Thanks
Ravi

This could be due to you have multiple JDK homes like java1.4 and java1.3. Instead of type JDK home in the windows box, try to browse and select the JDK home and try it. Otherwise, if you have multiple JDK homes, then try to remove one of them.

OIM 91 Installation Problem on Linux

Hi,
I had installed SOA-Oracle Application Server 10.1.3.3 and tried installing the Oracle Identity Manager in Linux machine, but at the end of installing the Oracle Identity Manager it was throwing an error like +"*Oracle Identity Manager found that Keytoolsvr.sh failed"*+_
early response is appreciated.

Hi,
Try the followings
- Use the latest JDK
- Just set your LD_LIBRARY_path $ORACLE_HOME/lib:/usr/lib
LD_LIBRARY_path $ORACLE_HOME/lib:/usr/lib
allocate your libcwait.so & set the following LD_PRELOAD (the place in which libcwait.so
is allocated.
If U do'not find it then
Execute the following as oracle user
gcc -O2 -shared -o ~/libcwait.so -fpic -xc - <<\EOF
#include <errno.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <sys/wait.h>
pid_t
__libc_wait (int *status)
int res;
asm volatile ("pushl %%ebx\n\t"
"movl %2, %%ebx\n\t"
"movl %1, %%eax\n\t"
"int $0x80\n\t"
"popl %%ebx"
: "=a" (res)
: "i" (__NR_wait4), "0" (WAIT_ANY), "c" (status), "d" (0),
"S" (0));
return res;
EOF
export LD_PRELOAD=~/libcwait.so
Let me know,
Cheers,
Hamdy

Oracle 10.2.0 DB installation problem on Linux RedHat 4

When I install Oracle 10g release 2 database on my Linux RedHat 4 platform, I got the following error message (from action log file):
INFO: /u01/app/oracle/product/10.2.0/db_1/bin/genorasdksh: Failed to link liborasdkbase.so.10.2
INFO: make: *** [liborasdkbase] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'all_no_orcl ihsodbc' of makefile '/u01/app/oracle/product/10.2.0/db_1/rdbms/lib/ins_rdbms.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2006-10-05_11-17-26AM.log' for details.
Exception Severity: 1
Can someone help me to solve this problem?
Your kind assistance will be highly appreciated!

I didn't install the whole OS but just some packages that contain required rpms by Linux Redhad 4. I guess I accidently missed a package. In order to make sure that I have installed all necessary packages, I just re-installed the OS with care. Thanks for your advices.
The Oracle DB installation was successful, however, after I installed the Oracle HTTP Server and then stop the HTTP Server, I can't start it again. The following is the error message.
[oracle@linuxkm database]$ /u01/app/oracle/product/10.2.0/http_1/opmn/bin/opmnctl startproc ias-component=HTTP_Server
opmnctl: starting opmn managed processes...
================================================================================
opmn id=linuxkm:6200
0 of 1 processes started.
ias-instance id=standalone
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=23484)
failed to start a managed process after the maximum retry limit
Log:
/u01/app/oracle/product/10.2.0/http_1/opmn/logs/HTTP_Server~1
Thank you very much for your help!

Oracle 8.1.7 installation problem on ( linux) red hat 7.1

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Hi,
My name is Fridirick REMBEAUX and I have the same problem. ;))
I did not understand the first point after :
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
At which url can I get this script ?
I think that maybe it's not the same problem because the installer and so the jre
still executed but nothing else appears.
And I'm also lost. When did the oracle products work well ??
I think I damned.
Hi
I get same Problem on Rh7.3 !But when i execute 2 Step will be OK!
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
2. export LD_ASSUME_KENERL=2.2.5
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Oracle 9.0.1 installation problem on Linux 7.2

I am getting the following error while installaing the Oracle 9.0.1 on Red Hat Linux 7.2.
"I/O error while opening or reading /tmp/OraInstall/temp8"
The installation is being done with "oracle" user and oracle user has complete read/write rights on /tmp and it's sub-folders.
Any suggestion in this regard will be highly appreciated.
Regards,
Asif Ijaz

well u need to run a patch which is u can download from oracle site itself before starting ur installation
and patch name is 'binutils-2.10.0.18-1.i386.rpm'
mostprobable this will sort out ur problem

ORACLE 8.1.7 INSTALLATION PROBLEM ON LINUX (URGENT)

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Try setting the LD_ASSUME_KERNEL=2.2.5 environment variable before you run the installer.
I needed to do this to get the 8.1.7 installer running on RedHat 7.1 and 7.2.
Scott
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Oracle Patch 11.1.0.6 -- 11.1.0.7 installer problems on linux

Hello,
i will do an upgrade and i downloaded patch file "p6890831_111070_Linux-x86". So i extractet the folder and call ./runInstaller.
But if i do this i get an error message: "./runInstaller: line 197: /home/oracle/patch: Datei oder Verzeichnis nicht gefunden" That means in english "File or Folder not found".
On line 197 i've found: $CMDDIR/install/.oui $*
What is the problem? What do i wrong?
I use RHEL 5!
Edited by: user6368351 on 08.10.2009 14:20

Hello,
i have done an upgrade from 10.2.0.4 to 11.1.0.6. There was no problem and 11.1.0.6 works right now. But i can't run the installer for the 11.1.0.7 patchset.
EDIT:
If i run the installer with root, so i get the typical message:
Oracle Universal Installer wird gestartet...
Temporärer Speicherplatz wird überprüft: muss größer sein als 80 MB. Tatsächlich 202209 MB Erfolgreich
Swap-Speicher wird überprüft: muss größer sein als 150 MB. Tatsächlich 5887 MB Erfolgreich
Monitor wird überprüft: muss so konfiguriert sein, dass mindestens 256 Farben angezeigt werden. Tatsächlich 16777216 Erfolgreich
Vorbereitung für das Starten von Oracle Universal Installer aus /tmp/OraInstall2009-10-12_12-03-07PM. Bitte haben Sie einen Moment Geduld...
Der Benutzer ist root. Oracle Universal Installer kann bei einem Root-Benutzer nicht mit der Installation fortfahren.
This means, i have to run the installer with an oracle user.
But ich I will run it with oracle rights, the installer will not run.
Edited by: user6368351 on 12.10.2009 03:04

Re:oracle 8.1.6 release 2 post installation problem on linux

hi,
While installing oracle 8.1.6, the one of the optional tool database configuration assistant failed.(DBCA-00047 : unable to create destination directories).
so i tried to create database manually.
so i copied init.ora file as initdemo.ora and edited the file as follows:
db_name=demo
controlfiles=('/disk1/oradata/demo/system01.dbf','/disk2/oradata/demo/system02.dbf')
cdump=/disk1/oradata/demo/cdump
bdump=/disk1/oradata/demo/bdump
udump=/disk1/oradata/demo/udump
then i saved the file.
After that i created a script for database creation as "demo.sql" to create database at nomount stage.
i.e,
create database demo
logfile group1('/disk1/oradata/demo/log1.log',/disk2/oradata/demo/log2.log') size 1000k
group2('/disk1/oradata/demo/log3.log',/disk2/oradata/demo/log4.log') size 1000k
controlfile reuse;
and saved it.
I gave the following commonds at the prompt:
$export $ORACLE_SID=demo
$svrmgrl
SVRMGR>connect internal
connected.
SVRMGR>startup nomount
here i got stuck up as it is not getting starting the instance.
so i tried in SQLPLUS mode
$sqlplus
username/password: sys/oracle as sysdba
Instance is idle.
SQL>startup nomount
LRM-00109 couldnot open parameter file.
ORA-01078 failure in processing system parameters.
so can you tell me where iam going wrong.
Praveen
[email protected]

The problem is you did not provide a pfile location for the parameter file. Please refer to the sample shell script below where it makes the right calls:
#!/bin/sh
ORACLE_SID=test
export ORACLE_SID
/u01/app/oracle/product/8.1.6/bin/svrmgrl << EOF
spool /u01/app/oracle/admin/test/create/crdb1.log
connect internal
startup nomount pfile = "/u01/app/oracle/admin/test/pfile/inittest.ora"
CREATE DATABASE "test"
maxdatafiles 254
maxinstances 8
maxlogfiles 32
character set US7ASCII
national character set US7ASCII
DATAFILE '/u01/oradata/test/system01.dbf' SIZE 100M AUTOEXTEND ON NEXT 640K
logfile '/u05/oradata/test/redo01.log' SIZE 100M,
'/u05/oradata/test/redo02.log' SIZE 100M,
'/u05/oradata/test/redo03.log' SIZE 100M;
disconnect
spool off
exit
EOF
Hope this helps !

Linux on Oracle: Installation Problem..Odd!!

I am trying to install oracle 8.0.5 DB server on my RedHat5.2 box
with all the necessary rpm install like gcc, cc,lib etc.
I am running the orainst from the har disk, I answer all
questions and then
I see the graph bar appearing and oracle getting installed.
However,
when I get to the point where it has to create the
ntcontab.o
I get the following O/S Error report:
Error during action 'Creating ntcontab.o'.
Command: make -f
hda4/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk ntcontab.o
>
(if [ "compile" = "compile" ] ;then \
/hda4/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /hda4/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /hda4/u01/app/oracle/product/8.0.5/lib ;fi)
/hda4/u01/app/oracle/product/8.0.5/bin/gennttab:
/hda4/u01/app/oracle/product/8.0.5/bin/get_platform: No such file or
directory
ntcontab.c:7: sys/types.h:No such file or directory
mv: ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
I also have the make install , when i type (for testing) :
make: *** No targets. Stop.
For the permission for oracle user, I have granted all type of
permission available. using linuxconf from redhat.
I would appreciate if anyone could give a hand with it. I am
stuck!!
Thanks you very much,
Victor Alamo
null

Victor Alamo (guest) wrote:
: I am trying to install oracle 8.0.5 DB server on my RedHat5.2
box
: with all the necessary rpm install like gcc, cc,lib etc.
: I am running the orainst from the har disk, I answer all
: questions and then
: I see the graph bar appearing and oracle getting installed.
: However,
: when I get to the point where it has to create the
: ntcontab.o
: I get the following O/S Error report:
: > Error during action 'Creating ntcontab.o'.
: >
: > Command: make -f
: > hda4/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: ntcontab.o
: >
: > (if [ "compile" = "compile" ] ;then \
: > /hda4/u01/app/oracle/product/8.0.5/bin/gennttab >
ntcontab.c
: > cc -c ntcontab.c ;\
: > rm -f /hda4/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: > mv ntcontab.o /hda4/u01/app/oracle/product/8.0.5/lib ;fi)
: > /hda4/u01/app/oracle/product/8.0.5/bin/gennttab:
: > /hda4/u01/app/oracle/product/8.0.5/bin/get_platform: No such
: file or
: > directory
: > ntcontab.c:7: sys/types.h:No such file or directory
: >
: > mv: ntcontab.o: No such file or directory
: > make: *** [ntcontab.o] Error 1
: >
: I also have the make install , when i type (for testing) :
: make: *** No targets. Stop.
: For the permission for oracle user, I have granted all type of
: permission available. using linuxconf from redhat.
: I would appreciate if anyone could give a hand with it. I am
: stuck!!
: Thanks you very much,
: Victor Alamo
null

HTML DB 10g installation problem on linux HTTP-503 ORA-604

I have a problem after the installation of HTML DB from the linux 10g R2 companion image.
I installed HTML DB and HTTP server in one go, on an new system that only has the default orcl database installed. I run Red Hat enterprise linux on a x86_64 system.
The HTML DB installation took a long time, but gave no errors.
When I access the http://hostname:7777/pls/htmldb url I get an This server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.-error.
But :7777 works fine and give me the http server default page.
In my Apache error log I see the following errors:
[Thu Dec 8 13:28:42 2005] [error] [client 10.11.121.20] [ecid: 1134048522:10.14.66.23:28193:0:1,0] mod_plsql: /pls/htmldb/htmldb HTTP-503 ORA-604
I looked at several internet sources, played with my marvel.conf and my dads.conf but to no avail. My oracle home is different from my html db home. There is no ./network/admin/tnsnames.ora in my HTML_DB _HOME. Should there be? One solution in the faq even told me to copy the htmldb tnsnames.ora over my db tnsnames.ora, but the installation did not create one for me.
When should I use a dads.conf instead of marvel.conf? I don't understand the need for this second file. I tried to also use it, because some solutions and the post-installation instructions hinted on doing it. But then I get a different error in the logs about a double DAD.
When I login through sqlplus in the orcl database with the HTMLDB_PUBLIC_USER and my password (that was created during the installation) it works, but I don't see any tables (yet?). So the account is not locked. But should I see some tables when I do select table_name from user_tables; ?
I probably missing something obvious here, but I'm a bit of a oracle newby.
Any help is appreciated,
Erik

Thanks Diemar,
It worked.
I stopped all oracle process and services.
I then logged out and in again as oracle to see if the unset stuck.
I then started my listener, databases, isqlnet and em.
I then started the httpd with:
${HTMLDB_HOME}/opmn/bin/opmnctl start
opmnctl: opmn started
${HTMLDB_HOME}/opmn/bin/opmnctl startproc
this still gave some errors and the httpd was not started:
ias-component=HTTP_Server
opmnctl: starting opmn managed processes...
================================================================================opmn id=aberlour.uni.mdx.ac.uk:6200
0 of 1 processes started.
ias-instance id=standalone
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3389)
failed to start a managed process after the maximum retry limit
Log:
/mdx/app/oracle/product/10.2.0/http/opmn/logs/HTTP_Server~1
last lines in this log where:
05/12/08 15:18:50 Stop process
/mdx/app/oracle/product/10.2.0/http/Apache/Apache/bin/apachectl stop: httpd stopped
05/12/08 15:31:55 Start process
/mdx/app/oracle/product/10.2.0/http/Apache/Apache/bin/apachectl start: execing httpd
05/12/08 15:31:57 Start process
/mdx/app/oracle/product/10.2.0/http/Apache/Apache/bin/apachectl start: execing httpd
I then added the PlsqlNLSLanguage line back into the marvel.conf
which now looks:
AddType text/xml xbl
AddType text/x-component htc
Alias /i/ /mdx/app/oracle/product/10.2.0/http/Apache/Apache/images/
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString xxxxxx.xxxxx.ac.uk:1521:orcl ServiceNameFormat
PlsqlNLSLanguage "ENGLISH_UNITED KINGDOM.AL32UTF8"
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword @BWIuxxxxxxxxxxxxxxxxxxxxxxid4Y4t8b9g==
Allow from all
</Location>
and I started the http again, and it works fine.
Problem solved. I will try to fine tune it so I'll get the basic LANG setting back in linux but without the .UTF-8 postfix.
thanks for your help,
Erik

Oracle10g Installation problem on Linux with DHCP IP

Hi,
I am new to Oracle Products, I have tried to install Oracle 10G on Linux with DHCP IP.
I got the following warning while installing even though I have loopback interface configured.
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Please help me in resolving this problem or Can I ignore this message?
My Server Configurations:
[root@SQAESMRH5 Oracle_Install_Errors]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:3F:79:FA:2C
inet addr:10.10.121.61 Bcast:10.10.121.2 Mask:255.255.255.0
inet6 addr: fe80::212:3fff:fe79:fa2c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20751998 errors:0 dropped:0 overruns:0 frame:0
TX packets:19278549 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2150795393 (2.0 GiB) TX bytes:438232502 (417.9 MiB)
Interrupt:177
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12383146 errors:0 dropped:0 overruns:0 frame:0
TX packets:12383146 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1965045834 (1.8 GiB) TX bytes:1965045834 (1.8 GiB)
[root@SQAESMRH5 Oracle_Install_Errors]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
#::1 localhost6.localdomain6 localhost6
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost6
[root@SQAESMRH5 Oracle_Install_Errors]#

This warning means it is not recommended to install Oracle 10g on a DHCP assigned IP address. It could work, but you won't be able to configure Enterprise Manager, since this tool requires a fixed IP address. If possible, have the IP address fixed.
~ Madrid
http://hrivera99.blogspot.com/

Installation problem on Linux?

Hi ,
i am installing Oracle Application Sever 10g on RHEL 3.0 or RHEL AS4.0
for that i have to apply patch3006854 as per installation manuals.
but after applying this patch linux wont allow me to do anything and gives error
cannot read from /etc/libcwait.so.
Thanks
Sohil

Hi,
Try the followings
- Use the latest JDK
- Just set your LD_LIBRARY_path $ORACLE_HOME/lib:/usr/lib
LD_LIBRARY_path $ORACLE_HOME/lib:/usr/lib
allocate your libcwait.so & set the following LD_PRELOAD (the place in which libcwait.so
is allocated.
If U do'not find it then
Execute the following as oracle user
gcc -O2 -shared -o ~/libcwait.so -fpic -xc - <<\EOF
#include <errno.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <sys/wait.h>
pid_t
__libc_wait (int *status)
int res;
asm volatile ("pushl %%ebx\n\t"
"movl %2, %%ebx\n\t"
"movl %1, %%eax\n\t"
"int $0x80\n\t"
"popl %%ebx"
: "=a" (res)
: "i" (__NR_wait4), "0" (WAIT_ANY), "c" (status), "d" (0),
"S" (0));
return res;
EOF
export LD_PRELOAD=~/libcwait.so
Let me know,
Cheers,
Hamdy

Oracle installation problem on linux

Similar Messages

Maybe you are looking for