Oracle instant client & unixODBC did not work on Fedora 4
Dear experts,
Please try to fix the following problem.
I want to connect to oracle 10g on windows XP from client that runs Fedora 4 using ODBC.
*1. I installed oracle instant client on Fedora:*
• oracle-instantclient11.2-basic-11.2.0.1.0-1.i386.rpm
• oracle-instantclient11.2-devel-11.2.0.1.0-1.i386.rpm
• oracle-instantclient11.2-odbc-11.2.0.1.0-1.i386.rpm
• oracle-instantclient11.2-sqlplus-11.2.0.1.0-1.i386.rpm
*2. Set the following environment variables:*
• ORACLE_HOME =/usr/lib/oracle/11.2/client
• ORACLE_HOME_LISTNER=/usr/lib/oracle/11.2/client/bin
• LD_LIBRARY_PATH =/usr/lib/oracle/11.2/client/lib
• SQLPATH =/usr/lib/oracle/11.2/client/lib
• TNS_ADMIN =/usr/lib/oracle/11.2/client/bin
• TWO_TASK =//xxx.xxx.xxx.xxx:1521/orcl
*3. Test connection from Fedora to Windows and it works perfect.*
sqlplus system/pass@//xxx.xxx.xxx.xxx:1521/orcl
*4. Intsall unixODBC-2.3.0.tar.gz*
*5. Add Oracle ODBC entry in odbc.ini*
[ORCL]
Driver = Oracle 11g ODBC driver
ServerName = xxx.xxx.xxx.xxx
Database = orcl
DSN = ORCL
Port = 1521
*6. And this’s the Oracle ODBC driver entry in odbcinst.ini*
[Oracle 11g ODBC driver]
Description = Oracle ODBC driver for Oracle 11g
Driver = /usr/lib/oracle/11.2/client/lib/libsqora.so.11.1
Driver64 =
Setup =
Setup64 =
UsageCount =
CPTimeout =
CPReuse =
FileUsage =
*7. Now, isql -v orcl system pass, fails and reports the following error:*
[S1000][unixODBC][Oracle][ODBC][Ora]ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
[ISQL]ERROR: Could not SQLConnect
Here’s my tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xxx)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL)
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Here’s my listener.ora:
SID_LIST_ORCL =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORCL)
(ORACLE_HOME = /usr/lib/oracle/11.2/client)
(GLOBAL_NAME = ORCL)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/11.2/client)
(PROGRAM = extproc)
ORCL =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xxx)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
Here’s my sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
tnsnames.ora, listener.ora & sqlnet.ora are at /usr/lib/oracle/11.2/client/bin
Please I’m waiting your help, sorry for long post.
Best regards,
Edited by: 788062 on Aug 15, 2010 2:32 PM
It works now after removing listener.ora & sqlnet.ora and modifying ServerName from xxx.xxx.xxx.xxx to //xxx.xxx.xxx.xxx:1521/orcl.
Thanks for your time.
Similar Messages
-
Oracle Instant Client - Redistributable or not?
Is Oracle Instant Client Redistributable?
As said, talk to your Oracle rep to get something in writing that confirms the statements on the IC home page
http://www.oracle.com/technology/tech/oci/instantclient/index.html -
Hello
I have Oracle 10.1.0 enterprise database installed on a Windows 2003 server.
I have another machine that has Fedora Core 5 installed on it. I downloaded:
Apache 2.2.3
Php 5.1.6
OracleInstantClient 10.1.0.5 (base and skdk packages) from technet.oracle.com
I created a directory called /usr/lib/instantclient10_1 in which I unzipped
the files for the Oracle Instant Client and the SDK into /usr/lib/instantclient10_1.
So inside /usr/lib/instantclient10_1 I have:
all the unzipped filed from the base for the instant client as well as
a directory called sdk with files inside this subdirectory.
I compiled and installed Apache.
I then tried to configure php using the instantclient with the configure option
--with-oci8=instantclient/usr/lib/instantclient10_1
The first time I did this I got the error: "link from
/usr/lib/instantclient10_1/libclntsh.so to libclntsh.so.10
not found"
Well I had the libclntsh.so.10 but no such link. So I did the following:
ln -s libclntsh.so.10.1 libclntsh.so
I assume this was OK to do but I found it strange that I had to do this.
Question #1 - why should I have to do this?
I then tried to configure php again but got an error that I paste in from
the debug.log. From this debug log you can see the configure options I gave for
php as well as the error. It says "cannot find -lirc". Now I did put into
/etc/ld.so.conf the line /usr/lib/gaim since that is where libirc.so is and ran
ldconfig but it still complained. When I copied libirc.so into /usr/lib it then said there were
lots of errors in that libirc.so. The only item in the configure options depending on lirc is
the with-oci8. Why does with-oci8 depend on lirc?
I also tried the above on Red Hat AS 4.0 and got the same errors.
Question #2 -- what do I do?
Thank You
Gail Lange
Here is the debug.log in the case when libirc.so is just in /usr/lib/gaim:
CONFIGURE: './configure' '--with-apxs2=/usr/local/apache2/bin/apxs' '--enable-track-vars'
'--enable-inline-optimization' '--with-gd' '--with-zlib' '--enable-debug'
'--with-oci8=instantclient,/usr/lib/instantclient10_1' '--enable-sigchild'
CC: gcc
CFLAGS: -I/usr/include -g -O2
CPPFLAGS:
CXX:
CXXFLAGS:
INCLUDES: -I/usr/include/libxml2 -I/home/gail/php/php-5.1.6/ext/date/lib
-I/usr/lib/instantclient10_1/sdk/include
LDFLAGS: -L/usr/lib -Wl,-rpath,/usr/lib/instantclient10_1 -L/usr/lib/instantclient10_1
LIBS: -lpng -lz -lz -lresolv -lm -ldl -lnsl -lxml2 -lz -lm -lxml2 -lz -lm -ldl -lm -lnsl
-lirc -lclntsh -lxml2 -lz -lm
DLIBS:
SAPI: apache2handler
PHP_RPATHS: /usr/lib/instantclient10_1
uname -a: Linux localhost.localdomain 2.6.15-1.2054_FC5smp #1 SMP Tue Mar 14 16:05:46 EST 2006
i686 i686 i386 GNU/Linux
gcc -o conftest -I/usr/include -g -O2 -L/usr/lib -Wl,-rpath,/usr/lib/instantclient10_1
-L/usr/lib/instantclient10_1 conftest.c -lpng -lz -lz -lresolv -lm -ldl -lnsl -lxml2 -lz -lm
-lxml2 -lz -lm -ldl -lm -lnsl -lirc -lclntsh -lxml2 -lz -lm 1>&5
conftest.c: In function 'main':
conftest.c:3: warning: incompatible implicit declaration of built-in function 'exit'
/usr/bin/ld: cannot find -lirc
collect2: ld returned 1 exit status
ThanksTo be perfectly honest, I'm not sure. Everything I could find on it had to do with IRC or some kind of remote control thing (for controlling audio/media players). Maybe if Ivan stops by he'll know what it means... he knows quite a lot about the inner workings of many of these libraries.
http://us3.php.net/install.unix was the most useful info I could find.
There's also this thread:
Cannot find ld -lirc PHP Linux
~Jer -
Oracle.DataAccess.Client.OracleDataAdapter.Update not working
Hi
I am using the Oracle.DataAccess.Client.OracleDataAdapter from Oracle.DataAccess runtime version v4.0.30319. I set the SelectCommand and retrieve data from Oracle without any problems using the adapter to fill a datatable. I then use the DataTable.Clear method to remove all rows and fill it again from a different source using a different adapter. I use the Oracle.DataAccess.Client.OracleCommandBuilder to create the Insert and Update commands and finally I call the update command of the using the original adapter in order to update the Oracle database but nothing is updated.
I examine the table row count at each stage and also display the table using a DataGridView on a form and all appears to be fine. No exception is thrown so I am stumped.
I would be grateful for any suggestions as to what I am doing wrong.
My environment is VS2010 Express
Edited by: user1947494 on 04-Feb-2011 05:46Hi,
Pretty tough without seeing any code. I really do not believe it has anything to do with the DataAdapter. What changed the specific row/rows after the second fill?
But, as a guess, take a look at the DataTable - Rows - RowState. Run the below(or some variant) method just prior to your update.
r,
dennis
public static DataTable GetDataTableChanges_Modified(DataSet dataSet, string dataTableName)
if (dataSet.Tables[dataTableName].Rows.Count > 0)
DataTable dt = dataSet.Tables[dataTableName].Clone(); ;
int c = 0;
foreach (DataRow r in dataSet.Tables[dataTableName].Rows)
DataRowState state = r.RowState;
switch (state)
case DataRowState.Modified:
DataRow anewrow_dr = dt.NewRow();
anewrow_dr.ItemArray = r.ItemArray;
dt.Rows.Add(anewrow_dr);
c = c + 1;
break;
default:
break;
if (c > 0)
return dt;
else
return null;
else
return null;
} -
Hi,
on a windows 2008 machine that has the Oracle instant client 11_1 installed (11.01.00.06) i am calling SQLDriverConnect in the following way:
std::string str = "Driver={Oracle in instantclient11_1};Dbq=//10.10.101.66:1521/orcl;;Uid=myUser;pwd=a;b";
odbcRc = SQLDriverConnect(hdbc, NULL, (SQLTCHAR*)str.c_str(), str.size(), (SQLTCHAR*)szConnStrOut, 1024, &cbConnStrOut, SQL_DRIVER_NOPROMPT)) == SQL_ERROR);
as long as the password contains no special chars (namely semicolon) it works fine. but when I try to use special chars in the password It stops working, with an invalid username/password error.
State: 28000 Native error: 1017 Message: [Oracle][ODBC][Ora]ORA-01017: invalid username/password; logon denied
i tried different variations of adding " (\") over the password, over the entire pwd=a;b or braces { but nothing seems to work.
the thing is that using ODBC works! what I did was:
open ODBC, go to System DSN tab, add "Oracle in instantclient11_1", then fill the following information:
Data source name: Anything
TNS Service Name: //10.10.101.66:1521/orcl
User ID: myUser
then i press test connection, enter the password "a;b"
and it works!
I cannot figure out what's my problem.
Thanks,
Roy.I've created your test table in my Oracle database using this extra character and I'm able to describe it properly.
SQL> desc test;
Name Null? Type
ATTIVITÀ VARCHAR2(40)
My character set being used is:
SQL> select * from v$nls_parameters;
NLS_CHARACTERSET
WE8ISO8859P15
NLS_NCHAR_CHARACTERSET
AL16UTF16
NLS_LENGTH_SEMANTICS
BYTE
So as long as it doesn't work for you in your native Oracle database I don't think it would work with DG4ODBC. So yes, it would be best to log a service request so that the Oracle database support can check out the NLS issue.
Edited by: kgronau on Sep 28, 2011 9:21 AM
To be complete here the describe of the MySQL table native and using DG4ODBC:
mysql> create table TEST (attività Varchar(40));
Query OK, 0 rows affected (0.00 sec)
mysql> desc TEST;
---------------------------------------------------+
| Field | Type | Null | Key | Default | Extra |
---------------------------------------------------+
| attività | varchar(40) | YES | | NULL | |
---------------------------------------------------+
1 row in set (0.00 sec)
SQL*Plus: Release 11.2.0.2.0 Production on Wed Sep 28 09:20:17 2011
SQL> desc "gateway"."TEST"@MYSQL_DG4ODBC_EMGTW_1122_DB;
Name Null? Type
attività VARCHAR2(80)
So in general it should work. -
Oracle OCI CLIENT 11g is not connecting with PHP & Apache on Fedora
Dear all... we are facing following issue... similar to other but not able to resolve ...
Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that LD_LIBRARY_PATH includes the directory with Oracle Instant Client libraries in /var/www/html/waseem2.php on line 2
our PHPinfo(); is showing following the OCI8 Extenstion Enabled
PHP Version 5.2.9
System Linux localhost.localdomain 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
Build Date Apr 17 2009 03:29:46
Configure Command './configure' '--build=i386-redhat-linux-gnu' '--host=i386-redhat-linux-gnu' '--target=i386-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--cache-file=../config.cache' '--with-libdir=lib' '--with-config-file-path=/etc' '--with-config-file-scan-dir=/etc/php.d' '--disable-debug' '--with-pic' '--disable-rpath' '--without-pear' '--with-bz2' '--with-curl' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-png-dir=/usr' '--with-xpm-dir=/usr' '--enable-gd-native-ttf' '--with-t1lib=/usr' '--without-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-openssl' '--with-pcre-regex=/usr' '--with-zlib' '--with-layout=GNU' '--enable-exif' '--enable-ftp' '--enable-magic-quotes' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--enable-wddx' '--with-kerberos' '--enable-ucd-snmp-hack' '--enable-shmop' '--enable-calendar' '--without-mime-magic' '--without-sqlite' '--with-libxml-dir=/usr' '--enable-xml' '--with-system-tzdata' '--with-apxs2=/usr/sbin/apxs' '--without-mysql' '--without-gd' '--disable-dom' '--disable-dba' '--without-unixODBC' '--disable-pdo' '--disable-xmlreader' '--disable-xmlwriter' '--disable-json' '--without-pspell'
Server API Apache 2.0 Handler
Virtual Directory Support disabled
Configuration File (php.ini) Path /etc
Loaded Configuration File /etc/php.ini
Scan this dir for additional .ini files /etc/php.d
additional .ini files parsed /etc/php.d/dbase.ini, /etc/php.d/json.ini, /etc/php.d/ldap.ini, /etc/php.d/mbstring.ini, /etc/php.d/mysql.ini, /etc/php.d/mysqli.ini, /etc/php.d/pdo.ini, /etc/php.d/pdo_mysql.ini, /etc/php.d/pdo_sqlite.ini, /etc/php.d/zip.ini
PHP API 20041225
PHP Extension 20060613
Zend Extension 220060519
Debug Build no
Thread Safety disabled
Zend Memory Manager enabled
IPv6 Support enabled
Registered PHP Streams php, file, data, http, ftp, compress.bzip2, compress.zlib, https, ftps, zip
Registered Stream Socket Transports tcp, udp, unix, udg, ssl, sslv3, sslv2, tls
Registered Stream Filters string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, convert.iconv.*, bzip2.*, zlib.*
Zend logo This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
PHP Credits
Configuration
PHP Core
Directive Local Value Master Value
allow_call_time_pass_reference Off Off
allow_url_fopen On On
allow_url_include Off Off
always_populate_raw_post_data Off Off
arg_separator.input & &
arg_separator.output & &
asp_tags Off Off
auto_append_file no value no value
auto_globals_jit On On
auto_prepend_file no value no value
browscap no value no value
default_charset no value no value
default_mimetype text/html text/html
define_syslog_variables Off Off
disable_classes no value no value
disable_functions no value no value
display_errors On On
display_startup_errors Off Off
doc_root no value no value
docref_ext no value no value
docref_root no value no value
enable_dl On On
error_append_string no value no value
error_log no value no value
error_prepend_string no value no value
error_reporting 6143 6143
expose_php On On
extension_dir /usr/lib/php/modules /usr/lib/php/modules
file_uploads On On
highlight.bg #FFFFFF #FFFFFF
highlight.comment #FF8000 #FF8000
highlight.default #0000BB #0000BB
highlight.html #000000 #000000
highlight.keyword #007700 #007700
highlight.string #DD0000 #DD0000
html_errors On On
ignore_repeated_errors Off Off
ignore_repeated_source Off Off
ignore_user_abort Off Off
implicit_flush Off Off
include_path .:/usr/share/pear:/usr/share/php .:/usr/share/pear:/usr/share/php
log_errors On On
log_errors_max_len 1024 1024
magic_quotes_gpc Off Off
magic_quotes_runtime Off Off
magic_quotes_sybase Off Off
mail.force_extra_parameters no value no value
max_execution_time 30 30
max_input_nesting_level 64 64
max_input_time 60 60
memory_limit 32M 32M
open_basedir no value no value
output_buffering 4096 4096
output_handler no value no value
post_max_size 8M 8M
precision 14 14
realpath_cache_size 16K 16K
realpath_cache_ttl 120 120
register_argc_argv Off Off
register_globals Off Off
register_long_arrays Off Off
report_memleaks On On
report_zend_debug On On
safe_mode Off Off
safe_mode_exec_dir no value no value
safe_mode_gid Off Off
safe_mode_include_dir no value no value
sendmail_from no value no value
sendmail_path /usr/sbin/sendmail -t -i /usr/sbin/sendmail -t -i
serialize_precision 100 100
short_open_tag On On
SMTP localhost localhost
smtp_port 25 25
sql.safe_mode Off Off
track_errors Off Off
unserialize_callback_func no value no value
upload_max_filesize 2M 2M
upload_tmp_dir no value no value
user_dir no value no value
variables_order EGPCS EGPCS
xmlrpc_error_number 0 0
xmlrpc_errors Off Off
y2k_compliance On On
zend.ze1_compatibility_mode Off Off
apache2handler
Apache Version Apache/2.2.11 (Fedora)
Apache API Version 20051115
Server Administrator root@localhost
Hostname:Port localhost.localdomain:0
User/Group apache(48)/48
Max Requests Per Child: 4000 - Keep Alive: off - Max Per Connection: 100
Timeouts Connection: 120 - Keep-Alive: 15
Virtual Server No
Server Root /etc/httpd
Loaded Modules core prefork http_core mod_so mod_auth_basic mod_auth_digest mod_authn_file mod_authn_alias mod_authn_anon mod_authn_dbm mod_authn_default mod_authz_host mod_authz_user mod_authz_owner mod_authz_groupfile mod_authz_dbm mod_authz_default util_ldap mod_authnz_ldap mod_include mod_log_config mod_logio mod_env mod_ext_filter mod_mime_magic mod_expires mod_deflate mod_headers mod_usertrack mod_setenvif mod_mime mod_dav mod_status mod_autoindex mod_info mod_dav_fs mod_vhost_alias mod_negotiation mod_dir mod_actions mod_speling mod_userdir mod_alias mod_rewrite mod_proxy mod_proxy_balancer mod_proxy_ftp mod_proxy_http mod_proxy_connect mod_cache mod_suexec mod_disk_cache mod_file_cache mod_mem_cache mod_cgi mod_perl mod_php5 mod_proxy_ajp mod_python mod_ssl
Directive Local Value Master Value
engine 1 1
last_modified 0 0
xbithack 0 0
Apache Environment
Variable Value
LD_LIBRARY_PATH /home/zubair/instantclient_11_1_
HTTP_HOST localhost
HTTP_USER_AGENT Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.4) Gecko/2008111217 Fedora/3.0.4-1.fc10 Firefox/3.0.4
HTTP_ACCEPT text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
HTTP_ACCEPT_LANGUAGE en-us,en;q=0.5
HTTP_ACCEPT_ENCODING gzip,deflate
HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.7
HTTP_KEEP_ALIVE 300
HTTP_CONNECTION keep-alive
HTTP_COOKIE PHPSESSID=he50pdhvtihu74lhmjnvggfr42
PATH /sbin:/usr/sbin:/bin:/usr/bin
SERVER_SIGNATURE <address>Apache/2.2.11 (Fedora) Server at localhost Port 80</address>
SERVER_SOFTWARE Apache/2.2.11 (Fedora)
SERVER_NAME localhost
SERVER_ADDR 127.0.0.1
SERVER_PORT 80
REMOTE_ADDR 127.0.0.1
DOCUMENT_ROOT /var/www/html
SERVER_ADMIN root@localhost
SCRIPT_FILENAME /var/www/html/waseem.php
REMOTE_PORT 39529
GATEWAY_INTERFACE CGI/1.1
SERVER_PROTOCOL HTTP/1.1
REQUEST_METHOD GET
QUERY_STRING no value
REQUEST_URI /waseem.php
SCRIPT_NAME /waseem.php
HTTP Headers Information
HTTP Request Headers
HTTP Request GET /waseem.php HTTP/1.1
Host localhost
User-Agent Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.4) Gecko/2008111217 Fedora/3.0.4-1.fc10 Firefox/3.0.4
Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language en-us,en;q=0.5
Accept-Encoding gzip,deflate
Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive 300
Connection keep-alive
Cookie PHPSESSID=he50pdhvtihu74lhmjnvggfr42
HTTP Response Headers
X-Powered-By PHP/5.2.9
Connection close
Transfer-Encoding chunked
Content-Type text/html; charset=UTF-8
bz2
BZip2 Support Enabled
Stream Wrapper support compress.bz2://
Stream Filter support bzip2.decompress, bzip2.compress
BZip2 Version 1.0.5, 10-Dec-2007
calendar
Calendar support enabled
ctype
ctype functions enabled
curl
cURL support enabled
cURL Information libcurl/7.18.2 NSS/3.12.1.1 zlib/1.2.3 libidn/0.6.14 libssh2/0.18
date
date/time support enabled
"Olson" Timezone Database Version 0.system
Timezone Database internal
Default timezone Asia/Karachi
Directive Local Value Master Value
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.583333 90.583333
date.sunset_zenith 90.583333 90.583333
date.timezone no value no value
exif
EXIF Support enabled
EXIF Version 1.4 $Id: exif.c,v 1.173.2.5.2.27 2008/12/31 11:17:37 sebastian Exp $
Supported EXIF Version 0220
Supported filetypes JPEG,TIFF
filter
Input Validation and Filtering enabled
Revision $Revision: 1.52.2.45 $
Directive Local Value Master Value
filter.default unsafe_raw unsafe_raw
filter.default_flags no value no value
ftp
FTP support enabled
gettext
GetText Support enabled
gmp
gmp support enabled
GMP version 4.2.2
hash
hash support enabled
Hashing Engines md2 md4 md5 sha1 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru gost adler32 crc32 crc32b haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5
iconv
iconv support enabled
iconv implementation glibc
iconv library version 2.9
Directive Local Value Master Value
iconv.input_encoding ISO-8859-1 ISO-8859-1
iconv.internal_encoding ISO-8859-1 ISO-8859-1
iconv.output_encoding ISO-8859-1 ISO-8859-1
json
json support enabled
json version 1.2.1
ldap
LDAP Support enabled
RCS Version $Id: ldap.c,v 1.161.2.3.2.14 2008/12/31 11:17:39 sebastian Exp $
Total Links 0/unlimited
API Version 3001
Vendor Name OpenLDAP
Vendor Version 20412
SASL Support Enabled
libxml
libXML support active
libXML Version 2.7.3
libXML streams enabled
mbstring
Multibyte Support enabled
Multibyte string engine libmbfl
Multibyte (japanese) regex support enabled
Multibyte regex (oniguruma) version 4.4.4
Multibyte regex (oniguruma) backtrack check On
mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1.
Directive Local Value Master Value
mbstring.detect_order no value no value
mbstring.encoding_translation Off Off
mbstring.func_overload 0 0
mbstring.http_input pass pass
mbstring.http_output pass pass
mbstring.internal_encoding no value no value
mbstring.language neutral neutral
mbstring.strict_detection Off Off
mbstring.substitute_character no value no value
mysql
MySQL Support enabled
Active Persistent Links 0
Active Links 0
Client API version 5.0.84
MYSQL_MODULE_TYPE external
MYSQL_SOCKET /var/lib/mysql/mysql.sock
MYSQL_INCLUDE -I/usr/include/mysql
MYSQL_LIBS -L/usr/lib/mysql -lmysqlclient
Directive Local Value Master Value
mysql.allow_persistent On On
mysql.connect_timeout 60 60
mysql.default_host no value no value
mysql.default_password no value no value
mysql.default_port no value no value
mysql.default_socket no value no value
mysql.default_user no value no value
mysql.max_links Unlimited Unlimited
mysql.max_persistent Unlimited Unlimited
mysql.trace_mode Off Off
mysqli
MysqlI Support enabled
Client API library version 5.0.84
Client API header version 5.0.77
MYSQLI_SOCKET /var/lib/mysql/mysql.sock
Directive Local Value Master Value
mysqli.default_host no value no value
mysqli.default_port 3306 3306
mysqli.default_pw no value no value
mysqli.default_socket no value no value
mysqli.default_user no value no value
mysqli.max_links Unlimited Unlimited
mysqli.reconnect Off Off
oci8
OCI8 Support enabled
Version 1.3.5
Revision $Revision: 1.269.2.16.2.38.2.32 $
Active Persistent Connections 0
Active Connections 0
Oracle Instant Client Version 11.1
Temporary Lob support enabled
Collections support enabled
Directive Local Value Master Value
oci8.connection_class no value no value
oci8.default_prefetch 100 100
oci8.events Off Off
oci8.max_persistent -1 -1
oci8.old_oci_close_semantics Off Off
oci8.persistent_timeout -1 -1
oci8.ping_interval 60 60
oci8.privileged_connect Off Off
oci8.statement_cache_size 20 20
openssl
OpenSSL support enabled
OpenSSL Version OpenSSL 0.9.8g 19 Oct 2007
pcre
PCRE (Perl Compatible Regular Expressions) Support enabled
PCRE Library Version 7.8 2008-09-05
Directive Local Value Master Value
pcre.backtrack_limit 100000 100000
pcre.recursion_limit 100000 100000
PDO
PDO support enabled
PDO drivers mysql, sqlite
pdo_mysql
PDO Driver for MySQL, client library version 5.0.84
pdo_sqlite
PDO Driver for SQLite 3.x enabled
PECL Module version 1.0.1 $Id: pdo_sqlite.c,v 1.10.2.6.2.4 2008/12/31 11:17:42 sebastian Exp $
SQLite Library 3.5.9
posix
Revision $Revision: 1.70.2.3.2.22 $
Reflection
Reflection enabled
Version $Id: php_reflection.c,v 1.164.2.33.2.55 2008/12/31 11:17:42 sebastian Exp $
session
Session Support enabled
Registered save handlers files user
Registered serializer handlers php php_binary wddx
Directive Local Value Master Value
session.auto_start Off Off
session.bug_compat_42 Off Off
session.bug_compat_warn On On
session.cache_expire 180 180
session.cache_limiter nocache nocache
session.cookie_domain no value no value
session.cookie_httponly Off Off
session.cookie_lifetime 0 0
session.cookie_path / /
session.cookie_secure Off Off
session.entropy_file no value no value
session.entropy_length 0 0
session.gc_divisor 1000 1000
session.gc_maxlifetime 1440 1440
session.gc_probability 1 1
session.hash_bits_per_character 5 5
session.hash_function 0 0
session.name PHPSESSID PHPSESSID
session.referer_check no value no value
session.save_handler files files
session.save_path /var/lib/php/session /var/lib/php/session
session.serialize_handler php php
session.use_cookies On On
session.use_only_cookies Off Off
session.use_trans_sid 0 0
shmop
shmop support enabled
SimpleXML
Simplexml support enabled
Revision $Revision: 1.151.2.22.2.46 $
Schema support enabled
sockets
Sockets Support enabled
SPL
SPL support enabled
Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilterIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RegexIterator, RuntimeException, SimpleXMLIterator, SplFileInfo, SplFileObject, SplObjectStorage, SplTempFileObject, UnderflowException, UnexpectedValueException
standard
Regex Library Bundled library enabled
Dynamic Library Support enabled
Path to sendmail /usr/sbin/sendmail -t -i
Directive Local Value Master Value
assert.active 1 1
assert.bail 0 0
assert.callback no value no value
assert.quiet_eval 0 0
assert.warning 1 1
auto_detect_line_endings 0 0
default_socket_timeout 60 60
safe_mode_allowed_env_vars PHP_ PHP_
safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH
url_rewriter.tags a=href,area=href,frame=src,input=src,form=fakeentry a=href,area=href,frame=src,input=src,form=fakeentry
user_agent no value no value
sysvmsg
sysvmsg support enabled
Revision $Revision: 1.20.2.3.2.8 $
tokenizer
Tokenizer Support enabled
wddx
WDDX Support enabled
WDDX Session Serializer enabled
xml
XML Support active
XML Namespace Support active
libxml2 Version 2.7.3
zip
Zip enabled
Extension Version $Id: php_zip.c,v 1.1.2.49 2009/02/05 19:53:22 pajoye Exp $
Zip version 1.8.11
Libzip version 0.9.0
zlib
ZLib Support enabled
Stream Wrapper support compress.zlib://
Stream Filter support zlib.inflate, zlib.deflate
Compiled Version 1.2.3
Linked Version 1.2.3
Directive Local Value Master Value
zlib.output_compression Off Off
zlib.output_compression_level -1 -1
zlib.output_handler no value no value
Additional Modules
Module Name
dbase
sysvsem
sysvshm
Environment
Variable Value
TERM xterm
LD_LIBRARY_PATH /home/zubair/instantclient_11_1/
PATH /sbin:/usr/sbin:/bin:/usr/bin
PWD /
LANG C
SHLVL 2
ORACLE_HOME /home/zubair/instantclient_11_1/
_ /usr/sbin/httpd
PHP Variables
Variable Value
_REQUEST["PHPSESSID"] he50pdhvtihu74lhmjnvggfr42
_COOKIE["PHPSESSID"] he50pdhvtihu74lhmjnvggfr42
SERVER["LDLIBRARY_PATH"] /home/zubair/instantclient_11_1
_SERVER["HTTP_HOST"] localhost
_SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.4) Gecko/2008111217 Fedora/3.0.4-1.fc10 Firefox/3.0.4
_SERVER["HTTP_ACCEPT"] text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
_SERVER["HTTP_ACCEPT_LANGUAGE"] en-us,en;q=0.5
_SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate
_SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.7
_SERVER["HTTP_KEEP_ALIVE"] 300
_SERVER["HTTP_CONNECTION"] keep-alive
_SERVER["HTTP_COOKIE"] PHPSESSID=he50pdhvtihu74lhmjnvggfr42
_SERVER["PATH"] /sbin:/usr/sbin:/bin:/usr/bin
_SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.11 (Fedora) Server at localhost Port 80</address>
_SERVER["SERVER_SOFTWARE"] Apache/2.2.11 (Fedora)
_SERVER["SERVER_NAME"] localhost
_SERVER["SERVER_ADDR"] 127.0.0.1
_SERVER["SERVER_PORT"] 80
_SERVER["REMOTE_ADDR"] 127.0.0.1
_SERVER["DOCUMENT_ROOT"] /var/www/html
_SERVER["SERVER_ADMIN"] root@localhost
_SERVER["SCRIPT_FILENAME"] /var/www/html/waseem.php
_SERVER["REMOTE_PORT"] 39529
_SERVER["GATEWAY_INTERFACE"] CGI/1.1
_SERVER["SERVER_PROTOCOL"] HTTP/1.1
_SERVER["REQUEST_METHOD"] GET
_SERVER["QUERY_STRING"] no value
_SERVER["REQUEST_URI"] /waseem.php
_SERVER["SCRIPT_NAME"] /waseem.php
_SERVER["PHP_SELF"] /waseem.php
_SERVER["REQUEST_TIME"] 1253301146
_ENV["TERM"] xterm
_ENV["LD_LIBRARY_PATH"] /home/zubair/instantclient_11_1/
_ENV["PATH"] /sbin:/usr/sbin:/bin:/usr/bin
_ENV["PWD"] /
_ENV["LANG"] C
_ENV["SHLVL"] 2
_ENV["ORACLE_HOME"] /home/zubair/instantclient_11_1/
_ENV["_"] /usr/sbin/httpd
PHP License
This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].
Have a nice day!
Fatal error: Call to undefined function odbc_connect() in /var/www/html/waseem.php on line 20
------------------------------------------------------------------------------------------Is the problem with oci_connect or odbc_connect?
The phpinfo() output shows '--without-unixODBC' which may be a root cause. There is no 'odbc' section shown in the phpinfo() output so I wouldn't expect odbc calls to work.
But if the issue is with OCI8, then make sure that Oracle environment variables and LD_LIBRARY_PATH are set BEFORE starting Apache.
More information on OCI8 and PHP is in http://www.oracle.com/technology/tech/php/underground-php-oracle-manual.html
Also see http://wiki.oracle.com/page/PHP+Oracle+FAQ
The PHP forum on OTN is http://www.oracle.com/technology/forums/php.html -
Imp Exp utility in ubuntu 10.4 with oracle instant client 10
Hi,
I have a problem with the imp/exp utility on Ubuntu 10.4.
I have installed the oracle instant client 10, and I have followed this thread
[http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/impexp.htm#CHDDBGDF]
So, I've set env variable in my .bashrc
ORACLE_HOME=/home/lucia/Programmi/instantclient10_1
export ORACLE_HOME
LD_LIBRARY_PATH=/home/lucia/Programmi/instantclient10_1:${LD_LIBRARY_PATH}
export LD_LIBRARY_PATH
PATH=/home/lucia/Programmi/instantclient10_1:${PATH}
export PATH
SQLPATH=/home/lucia/Programmi/instantclient10_1:${SQLPATH}
export SQLPATH
Sqlplus works fine, but when I try to use the utility exp/imp
exp DB_USER/DB_PW@DB_SCHEMA owner=DB_USER buffer=300000 LOG=DB_USER.log FILE=DB_USER.dmp compress=n
I have the following error:
No command 'exp' found, did you mean:
Command 'xep' from package 'pvm-examples' (universe)
Command 'ex' from package 'vim' (main)
Command 'ex' from package 'nvi' (universe)
Command 'ex' from package 'vim-nox' (universe)
Command 'ex' from package 'vim-gnome' (main)
Command 'ex' from package 'vim-tiny' (main)
Command 'ex' from package 'vim-gtk' (universe)
Command 'axp' from package 'axp' (universe)
Command 'expr' from package 'coreutils' (main)
Command 'expn' from package 'sendmail-base' (universe)
Command 'epp' from package 'e16' (universe)
exp: command not found
(I cannot use data pump exp)
Any suggestions?
thanks in advance.
Luciaroot@laptop:~# /tmp/CVU_11.2.0.1.0_lucia/runfixup.sh
Response file being used is :/tmp/CVU_11.2.0.1.0_lucia/fixup.response
Enable file being used is :/tmp/CVU_11.2.0.1.0_lucia/fixup.enable
Log file location: /tmp/CVU_11.2.0.1.0_lucia/orarun.log
[: 845: true: unexpected operator
[: 860: unexpected operator
Any suggestions?
thanks
LuciaHello,
I had the same problem. It was related to the shell script interpreter being used: it is really a bash script asking to be interpreted as sh. For the impatient, the solution was to change the first line of the script orarun.sh to read as:
#!/bin/bash
Explanation:
1. The script runfixup.sh calls orarun.sh. The latter is the one that fails starting at line 845.
2. The script is really a bash script as can be seen from the if syntax used. For example at line 191 we see the double equall sign ==:
if [ "`echo $SET_KERNEL_PARAMETERS | tr A-Z a-z`" == "true" ]
3. The bash man page says:
string1 == string2
string1 = string2
True if the strings are equal. = should be used with the test command for POSIX conformance.
string1 != string2
True if the strings are not equal.
(End of man page excerpt)
Notice in particular that for a bash script to be POSIX it should avoid the == and just use =
4. orarun.sh has on its first line #!/bin/sh. On my Ubuntu system, sh is a softlink to dash and the dash man page says:
s1 = s2 True if the strings s1 and s2 are identical.
s1 != s2 True if the strings s1 and s2 are not identical.
5. So this script script uses bash syntax but is interpreted by dash. It is possible that this worked fine for the Oracle developer if on their system sh was softlinked to bash (which is often the case). Apparently, one should then be very careful to not use idioms that are not POSIX compliant.
6. Another solution is to change the /bin/sh softlink from dash to bash. Personally, I was less comfortable doing this (the possible repercussions were wider than the proposed solution above).
After making the change, the script ran perfectly. I think the best solution is for Oracle to update the script to be POSIX compliant or to identify itself as bash.
Hope that helped,
Mark Gaber
Edited by: user1112514 on Jun 30, 2010 3:28 AM -
Oracle Instant Client libraries wouldn't install
I tried installing Oracle libraries (main file is called "oracle-instantclient-basic-10.2.0.4-1.i386", SDK and SQL according to the manual Oracle provides here: http://download.oracle.com/docs/cd/B1930601/install.102/e12121/insttask.htm#CIHEJFGF
After files is unzipped, manual instructs to use "runInstaller" command out of the directory where files are placed but this command is not recognized which tells me that either command file is missing or command is spelled wrong in the manual.
If anybody has successfully installed Oracle Instant Client on OS X 10.6 from the official Oracle download, please help! Thanks in advance.Ok - I ran an ugly hack (similar to what I did with Linux) and manually moved files to locations which Oracle considers default and which do not require environmental variables, as follows:
When in the directory where Oracle client files were unzipped, run these commands:
cp sdk/include/*.h /usr/include
cp sqlplus /usr/bin
cp lib /usr/lib
Also, to be able to install OCI8 PHP module, following symbolic link will need to be created:
A symbolic link will need to be created as follows:
cd /usr/lib
ln -s libclntsh.dylib.10.1 libclntsh.dylib
I then installed oci8 for PHP and DBD::oracle for Perl and ran some test files, they work. However, if somebody knows why libraries didn't install with the command, as manual instructs, please answer! Thanks in advance! -
Problem in SQL with CURSOR( ) ,Why the CURSOR did not work?
hi All:
I have a problem in SQL with CURSOR.
The data is as the attachments.
Here is the SQL statement as follow:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
IGLITM
1KV90CPG2
1KV90CPG2
1KV90CPG2
But, after I add one statement in the subquery, there is no record returned from CURSOR.
Here is the SQL statement:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST=B.IGCOST
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
no rows selected
Why the CURSOR did not work?
The database version is Oracle Database 10g Release 10.2.0.4.0 - 64bit Production.
F3102 DATA:
IGDOCO IGDCTO IGLITM IGCOST
10004 WO 1KV90CPG2 A1
10004 WO 1KV90CPG2 B1
10004 WO 1KV90CPG2 C3
10004 WO 1KV90CPG2 D1
F4801 DATA:
WADCTO WADOCO
WO 10004
Edited by: user2319139 on 2010/3/2 上午 1:17
Edited by: user2319139 on 2010/3/2 上午 1:20Why this structure and not a join?
The cursor() function returns a cursor handle that needs to be processed - in other words, the client needs to fetch data from it. The Oracle® Database SQL Reference+ (http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions005.htm#i1035107) describes it as being equivalent to a ref cursor handle.
Thus why are you creating ref cursor handles as a column in a SQL projection - where each row will have a "+nested+" ref cursor handle to process. What problem are you attempting to hack solve this way? -
Solaris PHP 5.2.12 Oracle Instant Client Error
We are testing a Oracle Solaris Express 11 Server with the standard Apache and PHP installation. But we need the Oracle Instant client and the oci8 module enabled for our company applications.
We did this by using ./pecl install oci8 in /usr/php/5.2/bin. We set the LD_LIBRARY_PATH in /etc/apache2/2.2/envvars
a 32bits solaris (x86) version of the Oracle Instant Client 11.2 is installed in /opt/oracle/instantclient_11_2 with the symbolic link made.
envvars:
LD_LIBRARY_PATH=/opt/oracle/instantclient_11_2
ORACLE_HOME=/opt/oracle/instantclient_11_2
ORACLE_BASE=/opt/oracle/instantclient_11_2
he oci8 module installed and php loads it.
phpinfo(); output:
oci8
OCI8 Support enabled
Version 1.4.6
Revision $Revision: 313688 $
Active Persistent Connections 0
Active Connections 0
Oracle Run-time Client Library Version 11.2.0.2.0
Oracle Instant Client Version 11.2
Temporary Lob support enabled
When we first view a site there is no problem but very randomly we get the following error:
OCIEnvNlsCreate() failed. There is something wrong with your system - please check that LD_LIBRARY_PATH includes the directory with Oracle Instant Client libraries*
but when we use echo getenv("LD_LIBRARY_PATH"); in php the output is "/opt/oracle/instantclient_11_2"
now the strange this is as randomly as it appears it disappears we can load the web-page without problems and after a couple of clicks the error is back. if we wait a coupe of seconds you can reload the page and it loads normaly.
The error appears to be random and we get it over and over agian, it comes and goes after a cpl of pages are viewed. It seems to appear more when there are multiple users browsing on the website.
Is there a fix for this? is this an known bug? It seems strange the instant client works some times and fails a second later without a change in the system.
Hope someone can help us.
Edited by: user10978378 on Sep 3, 2011 4:20 AMSolved it by compiling apache 2.2.20 into 64bits using:
CFLAGS="-m64" CXXFLAGS="-m64" LDFLAGS="-m64" ./configure enable-so enable-cgi enable-info enable-rewrite enable-deflate enable-ssl
and compiling php 5.3.8 into 64bits:
CFLAGS="-m64" CXXFLAGS="-m64" LDFLAGS="-m64" ./configure with-apxs2=/usr/local/apache2/bin/apxs with-gd with-zlib disable-ipv6 with-jpeg-dir=/usr/ with-png-dir=/usr/ with-freetype-dir=/usr/ with-pear with-openssl with-oci8=instantclient,/opt/oracle/instantclient_10_2
and using the 10.2.0.4 instant client.
there might be a bug in the 11.x ones, they dont seem to work on Oracle Solaris 11. -
CR 2008 and ODBC connection using Oracle Instant Client driver?
Two questions.
I'm creating CR 2008 report using an ODBC connection. The ODBC driver is the Oracle Instant Client (version 10.2, I think.)
When I define the connection, I see only a few tables. I do not see the Tables, Views, Qualifiers tree that I see with a normal Oracle Server connection.
Does anybody know why this happens? Is there a CR ODBC driver that works better?
Second question: I have a .NET application that is pointing the report to another Oracle DB. In my db, table names are not unique -- each user has the same set of tables. I find that when the .net applciation sets the datasource, I get connected to the first table with a given name; I do not get the table scoped by the logon user.
In the .net application, how do I scope the table name to a particular user.
Any info helps. Thanks.
TimHi Tim,
Below are the replies to your questions:
Answer 1: Please try the below steps:
- Make sure that in File->Options->Database Tab in the Data Explorer section the corresponding checkboxes are checked for tables, views,system tables,synonyms and stored procedures and the Table name LIKE and Owner LIKE boxes are blank.
- Please try with OLEDB connection and check the results.
- You can also refer to this SAP note no# 1215994, the link to which is given below:
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132313539393426]
Answer 2: If you are using RAS SDK only then you would be able to change table name. Please let us know if you are using RAS.
If you are using RAS with Java please post your query in the Java forum else if you are using Visual Studio/.NET then please post your question in .NET Forum.
Please update with the results.
Thanks! -
Oracle Instant Client 10.1.0.3
Hi,
I'm trying to install Oracle Instant Client on a FreeBSD 6.0 machine. The PORTS system of FreeBSD requires the version 10.1.0.3, but the version available for download is 10.1.0.4. Does anyone konw where to get 10.1.0.3 version?
Thanx,
HaboshHi,
Here is the link where you can find the ports : http://www.freshports.org/search.php?query=linux-oracle-instantclient-&search=go&num=10&stype=name&method=match&deleted=excludedeleted&start=1&casesensitivity=caseinsensitive
One question :
I'm trying to run sqlplus, but have a pb of version :
(sh)$ sqlplus
sqlplus: /lib/libc.so.6: version `GLIBC_2.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libsqlplus.so)
sqlplus: /lib/libpthread.so.0: version `GLIBC_2.3.2' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libclntsh.so.10.1)
sqlplus: /lib/libc.so.6: version `GLIBC_2.3.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libclntsh.so.10.1)
sqlplus: /lib/libc.so.6: version `GLIBC_2.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libclntsh.so.10.1)
sqlplus: /lib/libc.so.6: version `GLIBC_2.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libnnz10.so)
I had the same problem when I tried to compile directly from the client.
I can't find GLIBC_2.3.3 on FreeBSD 5.3.
Do you know if it works with another version of FreeBSD ? or should I install an emulator (I tried red hat 8.8, but doesn't work)? I tried to compile glib2.3.3, but it hasn't been ported on FreeBSD.
Anyway, I will try with redhat9.
Thanks,
Basha -
Request: enable use of sql*plus via Oracle Instant Client.
hi,
great project....
I've just installed Raptor release 3 on top of oracle instant client, and it seems to be running fine. my sql*plus from the instant client functions from the command line, but the sql*plus menu item in the tools menu is grayed out.
review of the help files say's that oracle_home must be set, but instant client does not need an oracle_home. (uses tns_admin instead).
is there a work around for this? (other than loading the full oracle client w/ it's sql*plus)
thanks
GTThe SQL*Plus menu item does not seem to be correctly detecting the current connection context. I'm filing this as a bug to be fixed before we ship. In the current version, however, you can enable the menu item by ensuring first that the connection is selected in the Connections navigator.
When the menu is invoked, you will be prompted for the location of the SQL*Plus executable. On Windows, this should just be the path to sqlplus.exe (or sqlplusw.exe). On Unix platforms, you should include 'xterm' or an equivalent in order to ensure that SQL*Plus invokes in a window.
- John
Raptor Development Team -
Oracle Instant Client is a memory hog?
Hi all,
I am having (potentially) an issue that I need to confirm with folks out there. I am not a DBA - I have a decent understanding of SQL and have been exposed to several RDBMS's, but this is my first time developing in PHP specifically with Oracle in mind.
First, my setup (note this is for development, not production; ultimately, the final deployed environment will be 2 high-end SPARC servers (one for web, one for db)):
1. DEV: Webserver running Solaris 10, Apache 2.0.52 and PHP 5.1.2 and Oracle Instant Client v.10.1.0.3 (note all versions except PHP haven been dictated by the customer). PHP is compiled with apxs2, postgres, sqlite-utf8 and oracle support (hooked into instant client).
2. DEV: DB server running Oracle 10g on Windows 2003. Using stock configuration.
I have a PHP application using AdoDB for abstraction and Smarty for templating; also using Fusebox.
The whole setup as described above works flawlessly. I notice that the apache process(es) usually sit between 20-25M given the LoadModule configuration in Apache, and the extensions being loaded in PHP. Whenever I make connection to postgres, or sqlite, the processes stay within the described memory usage patterns above (so 20-25M).
However, whenever I attempt making a connection using the Oracle Instant Client (using either native OCI8 or adoDB calls, using both persistent and non-persistent connections), the Apache process jumps from a meager 20-25M to 85M+... I don't even have to do a select - just the very action of establishing the connection results in this jump in memory usage.
What I need to know is - is this normal? Is it normal for the client to have this size of a footprint on memory? If so, I need to ensure that the final deployed environment is capable of handling these kinds of jumps. If this is NOT normal, well, heck folks, I need some friendly pointers.
Any and all help would be greatly appreciated.
Thanks,I emailed the OCI team and got this:
'Basically, the data shared library, which is about 85MB, gets mapped to the process
virtual address when it is initially loaded by dlopen(). However, only the pages needed
by the application are actually mapped to the physical memory, and they get swapped
out by OS unless re-used. The data shared library is loaded as a shareable read-only
const data. Therefore, a process memory map should show that it is shared among all
Apache processes.'
Some linking quirks on various platforms were ironed out pretty early, but on Solaris, if
you have metalink access, check out bug 4304233 .
There is an Instant Client forum at Instant Client
-- cj -
Oracle instant client 11g doesn`t connect to database 10g
hi,
i installed a oracle instant client 11g for windows xp on my pc, because i need a odbc connection.
I don`nt know this product. I don`t find a tns.ora file, so how can i give them the right parameter for my oracle database and how can i make a odbc connection.
Is it already the right client?
Thanks in advance.
Regards
Nicolenicole4 wrote:
Hi,
now 've seen that installed this client win32_11gR2_client this isn't the instant basic client.
Should i deinstall this client?
Or how can i make there a odbc connection?
Thanks
NicoleODBC sits on top of the Oracle client. (or any other native client of a given db product).
I don't think the ODBC drivers come with the instant client, though if you can locate a 3d party odbc driver for Oracle, that should work with the instant client.
Oracle ODBC drivers do come with the full client, but even there don't install by default - at least not up through 10g. In that case you have to select 'custom installation' (which can be done after a basic run-time installation) and select 'windows components'.
Maybe you are looking for
-
In-house production time in MRP2 View
Hi, Please advise what to mention in in-house production days field in mrp2 view, whether we need to mention the time required to produce 1 part or any qty? please advise.
-
Prints from Safari Reader crops edges
Hello, printing from Safari Reader to PDF or paper results in cropped edges, meaning that text is being cut off (not printed) on all sides. The preview in Reader looks fine. Changing margins manually in the printer's dialog is being overriden and so
-
Volume and click wheel all funky on me....
My ipod nano has a problem that when ever i turn it on the click wheel goes crazy and i have to scroll little by little to get where i want or it goes crazy. also my volume that when im listening to a song the volume just fumbles and i have to use th
-
MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.
I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot
-
I am working on bringing up a 12.1.3 EBS VM Template instances on Amazon EC2 and one of the last steps in the MetaLink Doc ( 1205963.1) askes that I update the applications context file (see below) How can I update these values manually since I am un