Oracle interconnect sdk adapters

Hi,
while starting the sdk adapter, we are getting this error.if anybody have suggession's and advice most welcome.
""oracle.jms.AQjmsException: Non supported character set: oracle-character-set-178"" for this error we sets the all classpath.
ERROR FOLLOWS
+++++++++++++
Wed Jun 11 11:08:56 EDT 2003: The Adapter service is starting..
Wed Jun 11 11:08:57 EDT 2003: Registering your application (MYAPPLICATION)..
Wed Jun 11 11:08:59 EDT 2003: Initializing the Bridge MyBridge..
Wed Jun 11 11:08:59 EDT 2003: Subscribing to message (myapp_cview.myapp_event_app_view:OAI/V1,OAI/V1,false,0)
Wed Jun 11 11:09:01 EDT 2003: There was an error subscribing to Topic or Queue oai_hub_queue. The Adapter will automatically subscribe to oai_hub_queue when the error has been corrected.
oracle.jms.AQjmsException: Non supported character set: oracle-character-set-178
     at oracle.jms.AQjmsSession.addDurableSubscriber(AQjmsSession.java:2616)
     at oracle.jms.AQjmsSession.createDurableSubscriber(AQjmsSession.java:2124)
     at oracle.jms.AQjmsSession.createDurableSubscriber(AQjmsSession.java:1963)
     at oracle.oai.agent.common.jms.Subscriber.<init>(Subscriber.java:66)
     at oracle.oai.agent.common.jms.JMSManager.subscribeTopic(JMSManager.java:672)
     at oracle.oai.agent.common.jms.JMSManager.subscribe(JMSManager.java:605)
     at oracle.oai.agent.server.messenger.mercury.MercuryMessenger.subscribe(MercuryMessenger.java:491)
     at oracle.oai.agent.server.ServerManager.subscribe(ServerManager.java:429)
     at oracle.oai.agent.proxy.AgentProxy.subscribe(AgentProxy.java:516)
     at oracle.oai.agent.client.AgentImpl.registerMessageReceiver(AgentImpl.java:617)
     at oracle.oai.agent.client.AgentImpl.registerMessageReceiver(AgentImpl.java:542)
     at MyBridge.init(MyBridge.java:23)
     at oracle.oai.agent.proxy.AgentProxy.go(AgentProxy.java:599)
     at oracle.oai.agent.proxy.AgentProxy.start(AgentProxy.java:638)
     at oracle.oai.agent.proxy.AgentProxy.<init>(AgentProxy.java:362)
     at oracle.oai.agent.service.AgentService.run(AgentService.java:41)
     at java.lang.Thread.run(Thread.java:484)
Wed Jun 11 11:09:01 EDT 2003: Starting the Bridge MyBridge..
Wed Jun 11 11:09:01 EDT 2003: Service started successfully.
Wed Jun 11 11:09:29 EDT 2003: Messenger: restarting.
Wed Jun 11 11:09:29 EDT 2003: Messenger: resubscribing to topic oai_hub_queue.
Wed Jun 11 11:09:29 EDT 2003: Messenger: resubscribing to queue oai_hub_queue.
Wed Jun 11 11:09:30 EDT 2003: Messenger: Restart failed.
oracle.jms.AQjmsException: JMS-130: JMS queue cannot be multi-conumer enabled
     at oracle.jms.AQjmsError.throwEx(AQjmsError.java:234)
     at oracle.jms.AQjmsSession.getQueue(AQjmsSession.java:3365)
     at oracle.oai.agent.common.jms.Receiver.<init>(Receiver.java:68)
     at oracle.oai.agent.common.jms.JMSManager.subscribeQueue(JMSManager.java:712)
     at oracle.oai.agent.common.jms.JMSManager.resubscribe(JMSManager.java:649)
     at oracle.oai.agent.common.jms.JMSManager.restart(JMSManager.java:372)
     at oracle.oai.agent.common.Restarter.doOperation(Restarter.java:42)
     at oracle.oai.agent.common.TimerThread.run(TimerThread.java:74)

Ramesh,
You might want to post the question to the Interconnect folks on this.
Thanks,
Raja

Similar Messages

Help needed in using oracle rules SDK

Hi,
For testing my rulesets using oracle rules SDK I doing the following:
1. Creation of dictionary, ruleSet.
2. Declared two kinds of globalVariable variables in my datamodel :
Final and non-Final.(Type of these varaibles are String and Double only)
3. Final globalVaraibles are used in creating rule's patterns.
4. Non-Final globalVariables are used in creating rule's action.
5. Functions are created for asserting globalVariables values and
returning non-final varaibles, since those are required as action
results.
6. In java code I am testing my ruleset (dict.testRuleSet()). Before
testing i am populating my final global variables (since these are used
in rule's patterns),
and updating datamodel.
The above procedure is working fine and I rules are successfully working.
Now, first of all i want to know if the above mentioned approach is correct or it needs to be reframed??
secondly, when i update datamodel with values (in java code itself) it
takes 4-5 seconds in updating it. This is the main issue that why it is
taking this much time??
any comment would be of great help.
Thanks in advance.

I will send up an alert for you, Colin. Even though I use iTunes for Mac, troubleshooting it isn't my forté.

Error while configuring Eclipse SDK for Oracle Utilities SDK 2.2

Hi.
I'm installing an Enterprise Taxation Management development workstation. I followed the install guide from top to bottom.
The application server is ok, the SDK seems to be OK.
I executed 'configureEclipse.exe' and made manual configurtions -as the install guide reads-. The eclipse project was created, but it has 2 missing libraries.
When I open eclipse, it shows the following errors:
Project EclipseProject220 is missing required library: 'lib/ojdbc5-11.1.0.6.0.jar'
Project EclipseProject220 is missing required library: 'lib/spl-ccb-2.2.0.jar'
My questions is ¿where do I get those jar files?
About the environement:
The develpment workstation is a laptop running Windows 2003 server, with ETM v2.2.0 Application Server installed. 3rd party SW is installed ok (appropiated versions). Web Server is Apache Tomcat v6.0.13. Eclipse v3.2.2. Oracle Utilities SDK v2.2.0.5 installed.
Database is installed on another computer, running Windows XP with Oracle Database 11i, connected on a LAN.
Thanks in advance.

I had these problems too..
I suppouse you're installind TAX (ETM) so the library you need is lib/spl-tax-2.2.0.jar'
On the other hand, the othe 'lib/ojdbc5-11.1.0.6.0.jar' eclipse is asking for. I changed it for 'lib/ojdbc5-11.1.0.7.0.jar'
After change these libs I can run the generator and deploy scripts even when i don't know jet how to develop.
Dou you have some cookbooks for developing (algorithnms, modify native clases, ect) you'd like to share??
Thanks a lot.

Performance Issue in using Oracle Rules SDK!!!!

Hi,
I am using Oracle rules SDK. I have created a dictionary and declared 9 global variables in it. Now, before testing my ruleset in my code, I populate those variables and update datamodel.
Date startDate = new Date();
try
this.dataModel.update();
*}catch (Exception e) {*
e.printStackTrace();
Date endDate = new Date();
long duration = endDate.getTime() - startDate.getTime();
System.out.println("Time Taken : "+duration);
Now the issue is that time taken by dataModel.update() is freaking 4210 milliseconds, i.e 4.2 seconds. Any idea why this is slow??
oracle.rules.sdk.editor.datamodel.DataModel = new DataModel(ruleDictionary);

When your query takes too long ...
Thanks,
Karthick.

ORA-06550: Error in Oracle InterConnect DB Adapter

Hi,
We are facing a problem while inserting a row into
Oracle database using Oracle InterConnect DB Adapter.
All the required configuration information like AppViews,CommonViews,Events,Application etc have been
created and configured in iStudio.
At runtime, OracleDB Adapter bridge (subscription) gets
the message from the interconnect hub and throws the
following error, while trying to insert the details into
table.
Error: db_bridge_writer_1 could not write the message to
the database because of an application error (java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00201: identifier 'EMPLOYEE_OBJ.SUB_NEWEMPLOYEE_OAI_V1' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
) in the application stored procedure. Please check your stored procedure. (Em
ployee_Obj.NewEmployee:OAI/V1,OAI/V1,false,0
EMPNO: 1000.0
FULLNAME: aaaaaaaaa
MANAGERNAME: sss
DIVISIONNO: 19.0
) was not written to the database.
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00201: identifier 'EMPLOYEE_OBJ.SUB_NEWEMPLOYEE_OAI_V1' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189).........
Following is the stored procedure that was defined in the
iStudio at the design time.
PROCEDURE sub_NewEmployee_OAI_V1(
EMPNO IN NUMBER,
FULLNAME IN LONG,
MANAGERNAME IN LONG,
DIVISIONNO IN NUMBER
AS
dummy NUMBER;
-- fill declarations here
BEGIN
-- fill code here
dummy:= 0;
'insert into employee values(EMPNO, FULLNAME,MANAGERNAME, DIVISIONNO)';
END sub_NewEmployee_OAI_V1;
What could be the reason for this error? Are we missing
something in the configuration?
Appreciate any pointers in solving this issue.
Thanks in advance,
Regards,
Murali.

Murali,
Where have you installed the Package EMPLOYEE_OBJ in your database?
It sounds like you've missed this vital step.
In iStudio...File > Export PL/SQL. Expand your subscribing Application (e.g. APPS) ... APPS > Subscribed Events, and highlight "Subscribe(EMPLOYEE_OBJ.NEWEMPLOYEE)". Press the "Browse" button, and select where you want to save the file. (e.g. d:\iStudio_Packages\XXOAI). The "XXOAI" prefix is added to the start of the created file.
A *.sql file will be created in the directory you specified (e.g. d:\iStudio_Packages\XXOAI_APPS_EMPLOYEE_OBJ.sql).
(Note: Ignore the empty "XXOAI_APPS_EMPLOYEE_OBJTypes.sql" file as you haven't created any new ones (i.e. NUMBER and LONG are standard))
Login to SQL*Plus now, as the same user specified in your DB Adapter.ini file (Hint: In adapter.ini, look for the entry "db_bridge_schema1_writer_username=[Your DB User]", e.g."db_bridge_schema1_writer_username=APPS.)
Execute the iStudio generated XXOAI_APPS_EMPLOYEE_OBJ.sql file.
You will now have the Package EMPLOYEE_OBJ created, together with a procedure SUB_NEWEMPLOYEE_OAI_V1.
You will notice that the DB Adapter (unless you've stopped it and cleared down any persistence files), will automatically find this new Package and Procedure, and will have updated your 'Employee' table. :-)
Hope this helps
Ian

OUAF Application Framework install question - for Oracle Utilities SDK 4.0

Hi,
I hope someone can help me, I am really confused.
I have a working install of MDM 2.1 and everything is working.
Now I need to install the OUAF SDK to start coding in JAVA but since I a mstill new to all this I dont really understand where the Application server is. I though that I installed that already. But it is not found in C:\ouaf\demo.
I have the framework installed, I do not understand why the SDK is telling me wrong folder.
Oracle Utilities Application Framework V4.1.0 Multiplatform is the one I have installed.
Here is the install doc:
http://www.box.net/shared/k86v1a4gtc793ho1zc20
Here is part of the install doc:
• OUAF Application Server in 32-bit and development (exploded) form. The installation will prompt for the folder name where this is installed. Note the first 2 digits of the versions (e.g. “4.0”) of both the SDK and application server must match.
I found the patch number to the SDK here: (but where do I find OUAF app server?)
http://blogs.oracle.com/theshortenspot/entry/new_releases_of_oracle_utiliti
10043375 - Oracle Utilities SDK 4.0.0.4 (for OUAF V4.0.2 based products).
Edited by: LodestarGuy on Jul 3, 2011 11:57 AM

Actually it did mess up. App server not starting anymore. The folder structure did not change also.
Here is the config env screen after the changes:
http://www.box.net/shared/rb0pe1ubi4vsgyvv8ok6
And here is the error:
http://www.box.net/shared/sqcnvpgdyyoevoy8fh0b
Thank you for looking into this.

Oracle InterConnect 10g

Can you install Oracle AS Interconnect 9.0.4 with a 9iAS Rel 2 (9.0.2) Infrastructure?
I noticed an issue listed in the 10g certification matrix : "383392 - Oracle AS InterConnect is only certified with 9.2.0.4 metadata repository"...does this refer to the product metadata in the infrastructure database or the metadata repository in the Hub database?
Can someone please clarify this? Thanks in advance!

Have you ever installed Oracle Interconnect Hub10g?On what database version?I have tried to install Interconnect Hub 10g on 9.2.0.5 DB and get a bug with postinstallation script hubschema.bat-calling dbms_aqadm.create_queue_table and get error. Entry from alert.log- Errors in file /app/oracle/product/9.2.0/rdbms/log/demo_ora_3231.trc: ORA-07445: exception encountered: core dump [0000000000000000] [SIGSEGV] [Invalid permissions for mapped object] [0x000000000] [] []. What configuration in your working environment(if its no a secret)?

Using workflow with Oracle InterConnect

Has anybody had any experience using Oracle WorkFlow with Oracle InterConnect? I have created events deployed by iStudio to Oracle Workflow but when I try to send the message, the activity/function that I create (both PL/SQL or External Java) using Oracle Workflow Builder never get executed. Am I missing something? Are there any procedure I need to run with iStudio and Oracle Workflow?
Any help will be greatly appreciated.
Thanks,
Edward

Hi Edward,
When you say that the function never gets executed, do you mean that nothing in the workflow is running, or just this step?
Is the system status set correctly? Have the event definitions been deployed from iStudio to BES? Have you completed the post installation steps for InterConnect for workflow development?
Is it just the workflow component that you are having problems with? Since the workflow adapter is essentially a customized AQ adapter, this should run fine out of the box.
HTH,
Matt
Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
http://www.workflowfaq.com
http://forum.workflowfaq.com

Oracle Interconnect in 11g?

Hello guys,
I have few questions on Oracle Interconnect.
1. Is Interconnect part of Oracle 11g SOA Suite?
2. How Oracle Interconnect is different from Oracle BPEL/ESB?
3. How easy (Design,development effort) is it to migrate from Oracle Interconnect to Oracle BPEL/ESB, if required?
Can someone please provide more information on Oracle Interconnect?
Thanks in advance,
Phani

Interconnect is really old stuff, used to be part of Oracle AS 9i .
I haven't done any migration, but for SOA 10g there was an Interconnect-adapter that you possibly could use if it's still available.
You will need to talk to someone at Oracle about this.
Otherwise you need to rewrite all integrations...

Oracle CM SDK support on Oracle DB 11g?

Hi,
Is the Oracle CM SDK supported on Oracle DB 11g? Is there a roadmap for this product as it's future seems a little vague?
Thanks for your help
Tim

I don't know that it is certified at this time.
I do not feel that platform is the go forward strategic direction oracle is taking though.
The current direction is the Oracle ECM set of products which have several integration paths including RIDC, CIS, SOAP, COM, Web Services, etc. Of course, this is all at cost and you may be asking as already own or are invested in the tools you are asking about!
http://www.oracle.com/us/products/middleware/content-management/index.html

Oracle utilities SDk download

Hi,
Where can I download oracle utilities SDK.
Is it licensed? if no can you please send me the url from where can I download SDK?

Login to edelivery.oracle.com and select Oracle Utilities Applications as product pack. Platform: Windows (32bit)
Select Oracle Utilities Customer Care and Billing Application WorkBench 2.2.0.0.0 Media Pack from the list of products.

Oracle CM SDK Queries

1. When a word document is edited in Webstarter Application UI, it opens the document in IE and when saved, saves it in the local machine. So,
a) How can we open the documents in the appropriate application at the client?
b) How can we program such that by default the document is saved at the same location in the Webstarter Application?
2. We want to add additional columns dynamically to the Document and Folder Object (which inherit from PublicObject) so that we can display these columns in the Webstarterapp UI. We have noticed that we can extend the attributes of the Document class in Oracle CM SDK Manager, but we are not able to specify these newly extended attribute as 'Required' (This option is disabled). Hence these attributes are not displayed in the Webstarterapp UI.
a) How can we specify the required attribute when extending the attribute of Document class?
b) Is there any other better approach to add columns dynamically?

a) How can we open the documents in the
in the appropriate application at the client?i haven't used webstarterapp, but you'll probably have to use some custom code which explicitly sets the document MIME type in the header of the response, and then IE will handle the document the way it is configured, opening Word Docs in Word, etc. i'm currently doing this with a custom Java app.
b) How can we program such that by default the
lt the document is saved at the same location in the
Webstarter Application?this would basically be impossible. since IE is creating a local temp file for the document at download, there's no way i can think of that a local save button in your application is going to save back to the server. and if you think about it, would you really want that? updating a document needs to be an entirely separate process.
a) How can we specify the required attribute
ribute when extending the attribute of Document
class?create a new object type in Java or XML that extends default Oracle classes, and then define your custom datatypes and other attributes. here's an example i used for testing a while back. this was for R2, so there might be slight changes to the format for CMSDK:
<?xml version="1.0" standalone="yes"?>
<CLASSOBJECT>
<NAME>CustomDocument</NAME>
<SUPERCLASS RefType="Name">Document</SUPERCLASS>
<DESCRIPTION>My extended document class.</DESCRIPTION>
<ABSTRACT>false</ABSTRACT>
<FINAL>false</FINAL>
<CLASSACL RefType="Name">CustomClassACL</CLASSACL>
<ATTRIBUTES>
<ATTRIBUTE>
<NAME>DocumentCategory</NAME>
<DATATYPE>String</DATATYPE>
<DATALENGTH>50</DATALENGTH>
<REQUIRED>true</REQUIRED>
</ATTRIBUTE>
<ATTRIBUTE>
<NAME>TrackingNumber</NAME>
<DATATYPE>Integer</DATATYPE>
<REQUIRED>false</REQUIRED>
</ATTRIBUTE>
</ATTRIBUTES>
</CLASSOBJECT>
hope that helps.
.rich

Oracle InterConnect 10g dba + Java

Hello :-)
I'm searching information about OAI. I need to know if the client apllication, which is using the dba connector to Oracle can be written in Java.
Other way - Is there Java API for client dba connector for ORacle InterConnect 10g?
I'll be gratefull for an information or URL's :-)

Have you ever installed Oracle Interconnect Hub10g?On what database version?I have tried to install Interconnect Hub 10g on 9.2.0.5 DB and get a bug with postinstallation script hubschema.bat-calling dbms_aqadm.create_queue_table and get error. Entry from alert.log- Errors in file /app/oracle/product/9.2.0/rdbms/log/demo_ora_3231.trc: ORA-07445: exception encountered: core dump [0000000000000000] [SIGSEGV] [Invalid permissions for mapped object] [0x000000000] [] []. What configuration in your working environment(if its no a secret)?

Can read or write possible from MQ Cluster using Oracle Interconnect

Hi,
Can we read or write from MQ Cluster using Oracle Interconnect? If we can then how can we do it?
Regards,
Koushik

Sorry guys if I am missing something here but would you not be better just using the available Oracle ESB AQ Adapter?
I've been able to pick messages up from an AQ Queue and on to both Oracle and another vendors JMS queues and vica-versa
Cheers
A.

Exception in running Oracle InterConnect Customised Adapter (i.e,FileBrige)

Dear all,
Again I am facing a problem in Cutomised adapter(FileBridge) which is provided in the cookbook of oracle interconnect 9.0.4(10g).
when i run the adapter i got these exceptions:
oracle.jms.AQjmsException: JMS-130: JMS queue cannot be multi-conumer enabled
at oracle.jms.AQjmsError.throwEx(AQjmsError.java:267)
at oracle.jms.AQjmsSession.getQueue(AQjmsSession.java:4510)
at oracle.oai.agent.common.jms.Receiver.<init>(Receiver.java:71)
at oracle.oai.agent.common.jms.JMSManager.subscribeQueue(JMSManager.java
:754)
at oracle.oai.agent.common.jms.JMSManager.resubscribe(JMSManager.java:69
1)
can ne body help me in this regards,
Best Regards,

This error might be caused by the fact that the hub database is built using a character set which is neither US7ASCII, nor WE8DEC, nor WE8ISO8859P1, nor UTF8.
If this is true, then in your adapter start script and all the other relevant components, you will have to include the library $ORACLE_HOME/jdbc/lib/nls_charset12.zip or $ORACLE_HOME/jdbc/lib/nls_charset11.zip, as appropriate, in your CLASSPATH.
If you have access to Metalink, you can check out Note 178994.1 for more details.
Regards,
Shub Lahiri
Product Manager
OracleAS Integration

Oracle interconnect sdk adapters

Similar Messages

Maybe you are looking for