Oracle JDBC4 errror!!!!
I am trying to install weblogic 8.1.3 in silent mode .
while installing i get an error WLJBDC4ORACLEHelperClass
not found . in classpath ih had set weblogic.jar , but this class is not available in weblogic.jar .Can anybody helpme in this regard.
thanks
harish
R Harish wrote:
I am trying to install weblogic 8.1.3 in silent mode .
while installing i get an error WLJBDC4ORACLEHelperClass
not found . in classpath ih had set weblogic.jar , but this class is not available in weblogic.jar .Can anybody helpme in this regard.
thanks
harishHi. We do have som classes with names similar to that:
weblogic.jdbc.utils.OracleJDBC4DriverURLHelper
weblogic.jdbc.utils.OracleJDBCDriverURLHelper
weblogic.jdbc.utils.WebLogicOracleJDBCDriverURLHelper
weblogic.jdbc.utils.WLOracleJDBC4DriverURLHelper
Those should be in the weblogic.jar... You should post the full
original error message, and probably post to the install help
group.
Joe
Similar Messages
-
Disp+work.exe dispatcher is not running
disp+work.exe dispatcher is not running while message server and igswd.exe is running properly. SAP is installed on Windows 64bit and on oracle. this errror message occures when i restore data from cold backup
thanks for ur reply but still i am facing the same problem. i had done all the things which were mention in the note 400241and 50088. still disp+work.exe is not running. its developer trace is given below
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid TRN
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 660
Thu Feb 14 12:54:58 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 660) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 14 12:55:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >drsap_TRN_00 <
DpShMCreate: sizeof(wp_adm) 18512 (1424)
DpShMCreate: sizeof(tm_adm) 5258160 (26160)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1744)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0D0050, size: 5947376)
DpShMCreate: allocated sys_adm at 000000000F0D0050
DpShMCreate: allocated wp_adm at 000000000F0D1F00
DpShMCreate: allocated tm_adm_list at 000000000F0D6750
DpShMCreate: allocated tm_adm at 000000000F0D67B0
DpShMCreate: allocated wp_ca_adm at 000000000F5DA360
DpShMCreate: allocated appc_ca_adm at 000000000F5E0120
DpShMCreate: allocated comm_adm at 000000000F5E2060
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F668CF0
DpShMCreate: allocated gw_adm at 000000000F668D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F668DA0
DpShMCreate: allocated wall_adm at 000000000F668DB0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1504
argv[0] = H:\usr\sap\TRN\DVEBMGS00\exe\jcontrol.EXE
argv[1] = H:\usr\sap\TRN\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS00_drsap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2650
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=TRN
argv[7] = -DSAPMYNAME=drsap_TRN_00
argv[8] = -DSAPPROFILE=H:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS00_drsap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( drsap) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >drsap_TRN_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Feb 14 12:55:07 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 276
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2652) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1504)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Feb 14 12:55:44 2008
ERROR => W0 (pid 2116) died [dpxxdisp.c 14241]
ERROR => W1 (pid 3156) died [dpxxdisp.c 14241]
ERROR => W2 (pid 1616) died [dpxxdisp.c 14241]
ERROR => W3 (pid 1812) died [dpxxdisp.c 14241]
ERROR => W4 (pid 224) died [dpxxdisp.c 14241]
ERROR => W5 (pid 3100) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3964) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3316) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3024) died [dpxxdisp.c 14241]
ERROR => W9 (pid 3780) died [dpxxdisp.c 14241]
ERROR => W10 (pid 1820) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 1712) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3760) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:55:54 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 14 07:55:54 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2116 Ended no 1 0 0
1 DIA 3156 Ended no 1 0 0
2 DIA 1616 Ended no 1 0 0
3 DIA 1812 Ended no 1 0 0
4 DIA 224 Ended no 1 0 0
5 DIA 3100 Ended no 1 0 0
6 UPD 3964 Ended no 1 0 0
7 ENQ 3316 Ended no 1 0 0
8 BTC 3024 Ended no 1 0 0
9 BTC 3780 Ended no 1 0 0
10 BTC 1820 Ended no 1 0 0
11 SPO 1712 Ended no 1 0 0
12 UP2 3760 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 14 07:55:54 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Feb 14 07:55:54 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 14 07:55:54 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:55:59 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >drsap_TRN_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4068) (SOFT_KILL)
Stop icman
killing process (1840) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4068 HANDLE:372)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:00 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4068 HANDLE:372)
wait for end of icman
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1840 HANDLE:380)
[DpProcDied] Process died (PID:1504 HANDLE:356)
DpStartStopMsg: send stop message (myname is >drsap_TRN_00 <)
NiIMyHostName: hostname = 'drsap'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Feb 14 12:56:12 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 300 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 300 (pos=3)
SiSelNRemove: removed sock 300
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 300
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 660) [dpxxdisp.c 10259]
Good Bye ..... -
Installation errror in Oracle Collaboration Suite
Hi
Actually i am getting an error while installing collaboration suite on my laptop. I m using windows XP and version of Oracle Universal installer is 10.1.0.4.0
I have downloaded the free trial version from oracle website
Following are the error message I am getting
There was an error while loading the library:
general Queries
There was an error while loading the library:
areas Queries
I am in urgent need of response
cheers
kamranPlease check the doc
http://download-west.oracle.com/docs/cd/B25553_01/install.1012/b25463/reqs.htm#BABCBAED
OCS is supported for Windows 2000 & Windows 2003. It is not Supported for XP. -
Oracle OLE DB Provider / Stored Procedure REF CURSOR errror
Post Author: robfurrball
CA Forum: Data Connectivity and SQL
All,I'm out of ideas on this and would appreciate any suggestions.I'm trying to use Crystal XI to connect to an Oracle 9i database using the Oracle OLE DB Provider (required to use this provider by a 3rd party program that fires off the report).If I connect using the Microsoft OLE DB Provider for Oracle, the report will return data. When connecting with the Oracle OLE DB Provider, I get the following:Database Connector Error: 'ADO Error Code: 0x80040e14
Source: OraOLEDB
Description: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SP_MOMGLOBCSHBAL_TEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Native Error: 6550 [Database Vendor Code: 6550 ]' -
The procedure's only parameter is an IN OUT SYS_REFCURSOR, and the Oracle OLE DB Provider is version 9.2.0.7.0 Thanks,RobPost Author: robfurrball
CA Forum: Data Connectivity and SQL
Summary: After going
back and forth with Business Objects support they ruled that it was an issue
with the provider itself, recommended I contact Oracle for resolution, and
closed the case before I could comment back to them. I was unable to send this response to their
support team, so I'm posting it here in hopes that I can save others time/money
in the future.
My Response -
I appreciate your input and would have liked to comment further on the case management system before you closed the case. I'm a little surprised and disappointed that you recommend I contact Oracle directly about this issue.I would imagine that a company as large as Business Objects would have much better results dealing with Oracle to resolve an issue compared to an individual.Also, since you are able to connect to other objects (such as a table) in Crystal Reports using that provider, I would expect that you would want customers to be able to connect to stored procedures using it as well. Otherwise, it would seem appropriate to either alert customers of this defect through documentation, public message boards, and forums.Using Crystal to pull data from stored procedures in other databases and data providers made me think that was a viable option for this project. Since it was not documented as a limitation of Crystal and the provider, it has cost my organization a great deal of time and money trying to troubleshoot an issue I would have expected to be caught in Crystal Reports' internal quality assurance testing.------ This is the final note I received on my support case: -
Please note that the statement used to execute a procedure within ODBC/OLE DB is different from the native 'Oracle Server' statement.In ODBC or OLE DB, the call is '{CALL "SCHEMANAME"."TEST_PROCEDURE"(3)}' , when using native 'Oracle Server' the call is 'BEGIN "SCHEMANAME"."TEST_PROCEDURE"(:TEST_CURSOR, 1); END ;'In ODBC or OLE DB, the cursor is still used however it is not listed within the SQL Statement as in the Native connection. This is the behavior from Crystal Reports 9 forward that the cursor is not shown through ODBC/OLE DB.In addition to that as the issue is only with the Oracle OLE DB provider and I would suggest you to contact Oracle about this issue, since the issue occurs outside of Crystal Reports when using QTADO with a standard call, so it is not an issue between Crystal Reports and Oracle.The issue is only with Oracle OLE DB provider as the same Oracle stored procedure call works within QTADO with the MS Oracle OLE DB provider.As the issue is with the OLE DB Provider and not with Crystal Reports, we may not be able to proceed further. Hence, I am closing this case from Case Management System. -
Oracle 11g Database insatllation errror
Hi ,
When i start the installation i got the prequeries error Oracle universal installer can't open.
[oracle@sos02 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 57621 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16386 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-12-23_11-46-18AM. Please wait ...[oracle@sos02 database]$ Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)check this
xhost + unable to Open Display......
Unable to execute runInstaller: Check if the DISPLAY variable is set -
Petstore 1.3 with Oracle 8.1.7 on Solaris 9 - deployment error
Hello,
I'm trying to get Petstore 1.3 shipped with WebLogic Server 7.0 to work with Oracle
8.1.7 on Solaris 9 with a third-party (Oracle) jdbc driver (classes12). I did
the following:
1) created a new connection pool with the correct Oracle database URL and driver
class name (oracle.jdbc.driver.OracleDriver), also user/password properties for
the Oracle db, and the WL server selected in targets;
2) created a database schema for Oracle based on the data in Pointbase and the
weblogic-cmp-rdbms-jar file as well as petstore_catalog_utf8.sql;
3) created a new tx datasource pointing to the Oracle conn pool;
4) modified the catalog component's ejb-jar.xml file's env-entry to contain CatalogOracleDAOImpl;
5) put weblogic.jar in the classpath;
6) used Java's dbping utility to check connection to the database via the Oracle
driver (works fine--no network adapter error or anything related).
I then rebuilt the ear files (build is successful), but when deploying get the
following error:
"Cannot deploy EJB AccountEJB from customerEjb.jar. Cannot find datasource for
JNDI datasource-petstorePool" and says to make sure the JNDI name and deployment
descriptors are correct (I checked the customer component's deployment descriptors
against the tx datasources' JNDI and they match).
What step(s) am I missing? Any suggestions on what else I need to modify would
be very much appreciated.
Thanks,
Beverly ClaireBeverly:
If you have 8.1, then you should be able to simply and easily create a
connection pool to petstore via the console.
The current error you encountering: "petstorePool does not exist" is
because either:
petstorePool is not defined or there was a failure when the pool was first
created trying to connect to the DBMS.
The full errror should be in the log file prior to the TXDatasource error.
Cheers
mbg
"Beverly Claire" <[email protected]> wrote in message
news:[email protected]...
>
Hello Rob,
Thanks for your reply. Yes, the tx datasource's JNDI name isdatasource-petstorePool.
The server log says that "petstorePool does not exist".
My conn pool contents:
Name: petstorePool
URL: jdbc:oracle:thin:@<replaced with db address>:<replaced with dbport>:<replaced
with db SID>
Driver Class Name: oracle.jdbc.driver.OracleDriver
Properties: user=<replaced with username*>
password=<replaced with password*>
*same username and password used to set up the Petstore tables in Oracledb.
>
My tx datasource contents:
Name: PetstoreDataSource
JNDI: datasource-petstorePool
Pool Name: petstorePool
No, actually we're not evaluating in the sense of just-trying-things-out.One
of our clients is considering an application server. They're relying on usfor
help in choosing which would be best. As of now, we are comparing BEA WLServer
7 and 8.1, Sun ONE Application Server 7 EE, Oracle 9i Application Server,and
Fujitsu Interstage v5 Application Server. For cluster testing andperformance
comparison purposes, we'd like to use the same J2EE Application across allservers,
and the obvious choice is Petstore 1.3. One aim is to smoothly connect toan Oracle
database. The other app servers provide setup scripts and databaseschemas for
Petstore-with-Oracle, so db conn and deployment are not a problem at all.As for
WL, we've been trying to get Petstore (both the version downloaded fromSun's
Java Blueprints and the version that shipped with WL 7) to work withOracle, but
no luck so far. It's getting a bit frustrating, given the ease with whichthings
worked out with the other app servers.
Yes, I've tried out Avitek MedRec for WL 8.1, and this time BEA has kindlymade
provisions for Oracle db, so connection to Oracle is not a problem. I'mhoping
BEA will come around to doing the same thing for Petstore, although I'mguessing
that won't be in the near future.
Any other suggestions would be much appreciated.
Thanks,
Bevery Claire -
ERROR: ORACLE prepare error: ORA-00936: missing expression
Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85 library = rosdwp nolist;
86 delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90 library=work nolist;
91 copy out = rosdwp move;
92 select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105 execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153 biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163 )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85 library = rosdwp nolist;
86 delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90 library=work nolist;
91 copy out = rosdwp move;
92 select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105 execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155 BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM -
I have Oracle 10g Express Edition 10.2.0.1.0 under Windows XP SP2 on my Personal Computer. There is installed the too , which is working fine.
Also I have Oracle 10g Standard Edition 10.2.0.1.0 (after installing Oracle 10g BI SE One) under Windows 2000 Adv. Server (On remote Server named URAN).
I tried to install the APEX 3.1.0.00.32 on URAN Server.
I made all points from the list in the Oracle Database Application Express Installation Guide Release 3.1 E10496-02 (the same steps on my Personal Computer where APEX 3.1.0.00.32 is working fine).
But!!!
When I’m starting APEX 3.1.0.00.32 (on the Server - http://URAN:8080/apex/apex_admin) then I get errror:
Unauthorized
after 3 time entering the correct user & password ( from URAN accounts list ) in XDB user window.
QUESTION 1: Why version number of Database on my PC & on Server is same, but
APEX 3.1.0.00.32 on my PC is working fine while its is not working on the Server?
I found out in Internet the APEX 3.1.0.00.32 is working correctly on ORACLE SE from version 10.2.0.3. But ! I have Oracle 10g Express Edition VERSION ‘s 10.2.0.1.0 and the APEX 3.1.0.00.32 is working fine there. What ?! Oracle 10g XE 10.2.0.1.0 & Oracle 10g SE 10.2.0.1.0 have different the data dictionary?
QUESTION 2: In Oracle® Database Application Express Installation Guide
Release 3.1 E10496-02 , in section
4.3 About Configuring the Embedded PL/SQL Gateway
said
Note:
The Oracle XML DB HTTP Server with the embedded PL/SQL gateway is not supported prior to Oracle Database 11g.
But! My Oracle 10g Express Edition has version is 10.2.0.1.0 (less than 11g) AND …
And APEX 3.1.0.00.32 is working fine by using XML DB HTTP Server nevertheless!
By starting - http://127.0.0.1:8080/apex/apex_admin
SUMMARY: Could I launch APEX 3.1.0.00.32 on the Server ( after any magic pass )?
OR I need upgrade my Oracle 10g Standard Edition 10.2.0.1.0 to version 10.2.0.3.0 (what very difficultly and idly for me)?Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif -
I have Oracle 10g Express Edition 10.2.0.1.0 under Windows XP SP2 on my Personal Computer. There is installed the APEX 3.1.0.00.32 too , which is working fine.
Also I have Oracle 10g Standard Edition 10.2.0.1.0 (after installing Oracle 10g BI SE One) under Windows 2000 Adv. Server (On remote Server named URAN).
I tried to install the APEX 3.1.0.00.32 on URAN Server.
I made all points from the list in the Oracle Database Application Express Installation Guide Release 3.1 E10496-02 (the same steps on my Personal Computer where APEX 3.1.0.00.32 is working fine).
But!!!
When I’m starting APEX 3.1.0.00.32 (on the Server - http://URAN:8080/apex/apex_admin) then I get errror:
Unauthorized
after 3 time entering the correct user & password ( from URAN accounts list ) in XDB user window.
QUESTION 1: Why version number of Database on my PC & on Server is same, but
APEX 3.1.0.00.32 on my PC is working fine while its is not working on the Server?
I found out in Internet the APEX 3.1.0.00.32 is working correctly on ORACLE SE from version 10.2.0.3. But ! I have Oracle 10g Express Edition VERSION ‘s 10.2.0.1.0 and the APEX 3.1.0.00.32 is working fine there. What ?! Oracle 10g XE 10.2.0.1.0 & Oracle 10g SE 10.2.0.1.0 have different the data dictionary?
QUESTION 2: In Oracle® Database Application Express Installation Guide
Release 3.1 E10496-02 , in section
4.3 About Configuring the Embedded PL/SQL Gateway
said
Note:
The Oracle XML DB HTTP Server with the embedded PL/SQL gateway is not supported prior to Oracle Database 11g.
But! My Oracle 10g Express Edition has version is 10.2.0.1.0 (less than 11g) AND …
And APEX 3.1.0.00.32 is working fine by using XML DB HTTP Server nevertheless!
By starting - http://127.0.0.1:8080/apex/apex_admin
SUMMARY: Could I launch APEX 3.1.0.00.32 on the Server ( after any magic pass )?
OR I need upgrade my Oracle 10g Standard Edition 10.2.0.1.0 to version 10.2.0.3.0 (what very difficultly and idly for me)?Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif -
Anyone seen issues like hung threads using OIM9.1.0 with Oracle Database 11.1.0.7?
Thanks guys for the quick responses.
But I have tried both the options for putting the jar in Third Party and also by uploading using the OOTB utility UploadJar.sh.
But it is giving the same error.
I have tired rebouncing the server and also Purge cached, but no success.
Just to mention again, I have tried with all the last 3 postgres JDBC4 driver available on the site (u mentioned).
So, any other clue?
Thanks in advance. -
OIM 9.1.0 install connector for "Oracle Database 10g"
Hello,
Is anybody here who succeeded to install the connector for Oracle Database 10g into OIM 9.1.0?
If yes please give me a hint
Have a nice day!Thanks guys for the quick responses.
But I have tried both the options for putting the jar in Third Party and also by uploading using the OOTB utility UploadJar.sh.
But it is giving the same error.
I have tired rebouncing the server and also Purge cached, but no success.
Just to mention again, I have tried with all the last 3 postgres JDBC4 driver available on the site (u mentioned).
So, any other clue?
Thanks in advance. -
Problem in Unicode Data in Oracle Forms 6i
hello all,
i m using forms 6i with oracle 10g.
i have set Nls_lang =American_America.UTF8.
Now my problem is when i type some data i marathi Using a font
converter engine directly into the text box on form i just get
?????? in the text box.
But when i type same data on notepad n then paste it in textbox it gets
properly pasted and also get inserted in oracle .I m also able to
retrive it back properly.So i think it is not the problem of my
character set.Also i have set the font of textbox as Arial Unicode Ms.
i m not getting where the problem is?
I will b very thankfull if i get any help regarding this.Try checking the Job status in Report Servlet for the Errror.
-
Oracle Siebel 8 adapter on Oracle WebLogic 10g
Hi everybody,
I need to install the new Oracle Service Bus 10g and to integrate with Siebel 8. So what I need is off course the bus and the adapter. I've a list of questions that raised during my initial research:
1- Is it possible to install Oracle AS adapters on Oracle WebLogic 10g? I've tried to download the adapter and the only option was "adapters 101202" which require Oracle Home directory which is not available with Oracle WebLogic Installation.
2- Is there a new version of Bea WebLogic adapters? The current documentation within edocs site support Siebel 7.7 and it is only available for WebLogic 9.1
3- Where can I find installation guide for Oracle AS adapters?
4- When navigating through http://www.oracle.com/technology/products/integration/adapters/index.html the "Download Oracle Integration Adapters" directed me to download Oracle WebLogic 10g r3 server. I went with the download and installed WebLogic 10g, but there were no adapters included. Is it only a mistaken link or it might contain the adapters for WebLogic 10g somewhere?
Thanks in advance
TariHi Brian,
Generally the behavior you mentioned occurs when SRProc and SRBroker is unable to connect to Database.
Please Check Following.
1. Is Siebel Gateway Running Successfully? Please verify that Siebel Gateway listening on Standard port 2320. You can verify this by following command.
netstat -na | grep 2320
or
ps -aef | grep siebns
2. Change directory to <SIEBEL_ROOT>/siebsrvr/enterprises/<ENT_NAME>/<APP_SRVR>/log directory.
3. Do you see any logs here? If yes, please let me know the errror message in logs.
Hope this helps. All the best. -
Ok...... How can I delete this post? ---- > I resolve the issues......
Hi, When I create the trusted Recon, connector sendme:
ERROR [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' org.apache.struts.actions.DispatchAction - Request[CreateConnector] does not contain handler parameter named method
follow by
ERROR [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcTableDataObj/setTimestamp encounter some problems: {1}
java.lang.NullPointerException
at com.thortech.xl.dataobj.tcDataSet.setTimestamp(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.setTimestamp(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.setTimestamp(Unknown Source)
at com.thortech.xl.ddm.instance.visitor.ImportVisitor.visitStarted(Unknown Source)
===================================================================
Hi, I think I need to re install the GTC or OIM because all works fine (Recon with AD, Exchange... DataBase Provisioning) But when Im try to Recon with Oracle Databse11g Fails.
I read the manuals but nothing..... ok I do the next configs:
- Generic Technology Connector
- Create
=========================*Step 1*=================
Name ReconCity
Transport Provider (Reconciliation)................Database Application Tables Reconciliation
Format Provider (Reconciliation).....................Database Application Tables Reconciliation
Trusted Source Reconciliation.........................Selected
========================*Step 2*==================
Database Drive : oracle.jdbc.driver.OracleDriver
Database URL : jdbc:oracle:thin:@192.168.1.101:1521:DFGOB
Database User ID : system
Database Pass......: my_pass
parent Table/View
Name.......................: Recon_Users
Batch Size...............: All
Stop Reconciliat
ion Threshold..........: None
Stop Threshold........: None
Sourcedate Format: yyyy/MM/dd hh:mm:ss z
Reconcile Deletion
of Multival.................: "Selected"
Reconciliation
Type..........................: Full
========================*Step 3 (try 1)*===========
SOURCE.................*RECON STAGING*.......................*OIM*
USER_ID--------------> USER_ID -------------> User ID
FIRTS_NAME--------> FIRST_NAME ----------> FIRST_NAME
LAST_NAME---------> LAST_NAME ----------> . --> Yes, I map all fields to OIM
PASSWORD----------> PASSWORD ---------> .
EMAIL------------------> EMAIL ----------------> .
STATUS---------------> STATUS --------------> .
..........|Xellerate |--> ORGANIZATION ------------> .
..........|End-User |------> EMPLOYEE TYPE -----> .
..........|Full-Time |-------> USER TYPE ------------> .
- (STATUS values from my database table is: Active or Disabled)
- ( I try (Enabled/Disabled) )
For Fields USER_ID to STATUS
(Edit option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name.................: USER_ID
Mapping Action..........: Create mapping Without Transformation
Matching Only............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type *.............: String
Required.....................: Selected
For Fields ORGANIZATION to USER TYPE
(Add option)
Dataset........................: Reconciliation Staging
Child Dataset Name :
Field Name.................: ORGANIZATION
Mapping Action..........: Create mapping Without Transformation
Matching Only.............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type *.............: String
Required.....................: Selected
Input
Literal: Xellerate
===After save on step 4 I go to Resource Manager-->Manage Scheduled task--> RUN NOW and the log send me
DEBUG QuartzWorkerThread-4 XELLERATE.ADAPTERS - Class/Method: tcStructureUtil/getUserDefinedCols entered.
ERROR QuartzWorkerThread-4 XELLERATE.APIS - Class/Method: tcReconciliationOperationsBean/ignoreEventData encounter some problems: {1}
java.lang.NullPointerException
at com.thortech.xl.dataobj.util.tcAttributeSource.getAttrColumnName(Unknown Source)
at com.thortech.xl.dataobj.util.tcReconciliationUtil.getRuleElementWhere(Unknown Source)
at com.thortech.xl.dataobj.util.tcReconciliationUtil.getRuleWhere(Unknown Source)
at com.thortech.xl.dataobj.util.tcReconciliationUtil.getMatchedUserList(Unknown Source)
at com.thortech.xl.dataobj.util.tcReconciliationUtil.getMatchedUserList(Unknown Source)
at com.thortech.xl.dataobj.util.tcReconciliationUtil.ignoreEvent(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEventData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEvent(Unknown Source)
at com.thortech.xl.ejb.beans.tcReconciliationOperationsSession.ignoreEvent(Unknown Source)
at com.thortech.xl.ejb.beans.tcReconciliationOperations_gmh3ba_EOImpl.ignoreEvent(tcReconciliationOperations_gmh3ba_EOImpl.java:692)
at Thor.API.Operations.tcReconciliationOperationsClient.ignoreEvent(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy62.ignoreEvent(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
ERROR QuartzWorkerThread-4 XELLERATE.GC.FRAMEWORKRECONCILIATION - Reconciliation Encountered error:
Thor.API.Exceptions.tcAPIException: java.lang.NullPointerException
at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEventData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcReconciliationOperationsBean.ignoreEvent(Unknown Source)
at com.thortech.xl.ejb.beans.tcReconciliationOperationsSession.ignoreEvent(Unknown Source)
at com.thortech.xl.ejb.beans.tcReconciliationOperations_gmh3ba_EOImpl.ignoreEvent(tcReconciliationOperations_gmh3ba_EOImpl.java:692)
at Thor.API.Operations.tcReconciliationOperationsClient.ignoreEvent(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy62.ignoreEvent(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
WARN QuartzWorkerThread-4 XELLERATE.GC.FRAMEWORKRECONCILIATION - Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived
==========================================
========================*Step 3 (try 2)*==============
SOURCE..................*RECON STAGING*....................*OIM*
USER_ID--------------> USER_ID -------------> User ID
FIRTS_NAME--------> FIRST_NAME ----------> FIRST_NAME
LAST_NAME---------> LAST_NAME ----------> .
PASSWORD----------> PASSWORD ----------> .
EMAIL------------------> EMAIL -----------------> .
........|Xellerate |--> ORGANIZATION -------------> .
........|End-User |------> EMPLOYEE TYPE ------> .
........|Full-Time|-------> USER TYPE --------------> .
........|Active |------> SATUS -----------------> .
- (On STATUS I try (*Active/Enabled/Disabled*) )
For Fields USER_ID to EMAIL
(Edit option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name.................: USER_ID
Mapping Action.........: Create mapping Without Transformation
Matching Only.............: Not Applicable
Case-Insensitive.........: Not Applicable
Data Type *..............: String
Required.......................: Selected
For Fields ORGANIZATION to STATUS
(Add option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name................: STATUS
Mapping Action..........: Create mapping Without Transformation
Matching Only............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type *.............: String
Required......................: Selected
Input
Literal: Active
===After save on step 4 I go to Resource Manager-->Manage Scheduled task--> RUN NOW and the log sende me the same ERRROR posted up.
===============Step 3 (try 3)=======================
SOURCE...................*RECON STAGING*...................... OIM
USER_ID--------------> USER_ID -----------> User ID
FIRTS_NAME--------> FIRST_NAME ----------> FIRST_NAME
LAST_NAME---------> LAST_NAME ----------> .
PASSWORD----------> PASSWORD ----------> .
EMAIL------------------> EMAIL ------------> .
USER_STATUS----| T |--> USER_STATUS ---> .
.....................................|
.........................|Lookup.M4..|
............|Xellerate |--> ORGANIZATION ------------> .
............|End-User |------> EMPLOYEE TYPE ------> .
............|Full-Time |-------> USER TYPE -------------> .
- (USER_STATUS have the next Values: True/False)
For Fields USER_ID to EMAIL
(Edit option)
Dataset.......................: Reconciliation Staging
Child Dataset Name :
Field Name.................: USER_ID
Mapping Action..........: Create mapping Without Transformation
Matching Only.............: Not Applicable
Case-Insensitive.........: Not Applicable
Data Type *..............: String
Required......................: Selected
For Fields ORGANIZATION to USER_TYPE
(Add option)
Dataset........................: Reconciliation Staging
Child Dataset Name :
Field Name................: ORGANIZATION
Mapping Action..........: Create mapping Without Transformation
Matching Only............: Not Applicable
Case-Insensitive........: Not Applicable
Data Type *.............: String
Required.....................: Selected
Input
Literal: Xellerate
Dataset.......................: Reconciliation Staging
Child Dataset Name:
Field Name................: USER_STATUS
Mapping Action.........: Create Mapping with Translation
Matching Only...........: Not Applicable
Case-Insensitive.......: Not Applicable
Data Type *............: String
Required....................: Selected
Field Name USER_STATUS
Input
Dataset........:Source
Field Name :USER_STATUS
Lookup Code Name
Literal...........: Lookup.M4.Recon
===============
Lookup Definition
Code : Lookup.M4Recon
Field:
Lookup Type(Selected)
Required (Not Selected)
Group: Object
Lookup Code Info
| Code Key | Decode |
1 | True/False | Active/Disabled|
===After save on step 4 I go to Resource Manager-->Manage Scheduled task--> RUN NOW and the log sende me the same ERROR posted up.=============
I hope you can help me, Thanks.....
Edited by: user11296330 on Oct 18, 2009 8:55 PM
Edited by: user11296330 on Oct 18, 2009 10:10 PM
Edited by: user11296330 on Oct 19, 2009 3:33 PM
Edited by: user11296330 on Oct 20, 2009 1:52 AM
Edited by: user11296330 on Oct 21, 2009 9:08 AM
Edited by: user11296330 on Nov 8, 2009 10:16 PM
Edited by: user11296330 on Nov 8, 2009 10:20 PMHi amigo I solve my problem with the next:
OK, all above is good but in the manual they mistake something.... one step.
(All succesful with --> ========================*Step 3 (try 2)*==============)
1.- Ok, if you got every thing like above the last thing you need is follow the next link:
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/obe12_using_gtc_for_reconciliation/using_the_gtc.htm
Go to: "Modifying the GTC" ( just do this part)
Restart the OIM and Enjoy it.
Good day Amigo.
And don't forget on step three:
Click the Edit icon of the User ID field of the OIM - User data set.
b. On the Step 1: Provide Field Information page:
- From the Mapping Action list, select Create Mapping Without Transformation.
- Select Matching Only.
- Click Continue.
Mapping Information page, select Reconciliation
Staging from the Dataset list, select EMPLOYEE_ID (your ID Field) from the Field Name
list, and then click Continue.
If something go bad, tell me the steps like I did with the log.... see ya
Edited by: user11296330 on Nov 8, 2009 9:57 PM
Edited by: user11296330 on Nov 8, 2009 10:21 PM -
Hello Folks and Expert,
I am Certified Ora DBA and am stuck, thats a shame
I am going to install and Test Oracle 10g on Vista as my future client will use Just Vista and no othr OS, so there is no OTHER OS options,
I ready all the documentaiotn and release notes and also read that Oracle 10g(10.2.0.3) is certified on Vita Ultimate.
I downloaded the DB which is frm the below link:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
*** It installs but it justdoesn't work properly, PLEASE HEEEEEEELP I am running out of time.
steps I have done:
1. Installed loppback and tested and it works when I ping, both ping computer and ping computer.domain with no error.
- whic means under windows>system32>driver> etc>host I added the 10.10.10.10 and cmputer name.
2. Under MMC I added cmputer local policy for local computer
3. Also Under "Local security setting" under "Local Policies" Under "User right Assignment" Under "Log on as a Batch job" I added the User name which was created when weload the Vista for the first time which is the Computer Admin, ALSO REALOADED THE COMPUTER WITH TH FACTORY SETTING AND AFTER THE FIST BOOT, UNLOCKED THE "ADMINISTRATOR" USER OF THE OS AND TESTED WITH THE ADMIN USER AS WELL WHICH WAS ADDED TO THIS lOG ON AS A BATCH JOB.
4. Restarted the Computer on all the step that I had to
5. Downloaded the DB and installed the DB, it installled without any Error
******************My Questions are as belooooowww ******************
When Oracle installd he prduct, usually under the
Start menu> All programs we should have 4 folders (Application Development, Configuration and Migration, Integrated management tools, Oralce installlation products) and DATABASE CONTROL - ORCL
a - when installation finishesh it JSUT DOESN't CREATE ------> DATABASE CONTROL - ORCL Whyyyyy ? (It is driving me crazy, I have another xp machine and it has also I had EVEN Vista Home premium and I was able to install on it before to test)
b - I can loging to the database after i type the adress I remembered manually in the browser, it logs in without any errror, but
When I want to shutdown the database It passes the host crendential once and I wait and it does nothing and a little windown pops up and says
*"Enterprise manager stopped working"*
C - To test and stop Listener also it just doesn't stop it and doest the samething,
I just wannna CRYYY, it is getting me Crazy,
PLEASE HELP ME with all THREE QUESTONS A,B,C PLEASE HELLLLLLPPPPP
Rgrds,Hello Folks and Expert,
I am Certified Ora DBA and am stuck, thats a shame
I am going to install and Test Oracle 10g on Vista as my future client will use Just Vista and no othr OS, so there is no OTHER OS options,
I ready all the documentaiotn and release notes and also read that Oracle 10g(10.2.0.3) is certified on Vita Ultimate.
I downloaded the DB which is frm the below link:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
*** It installs but it justdoesn't work properly, PLEASE HEEEEEEELP I am running out of time.
steps I have done:
1. Installed loppback and tested and it works when I ping, both ping computer and ping computer.domain with no error.
- whic means under windows>system32>driver> etc>host I added the 10.10.10.10 and cmputer name.
2. Under MMC I added cmputer local policy for local computer
3. Also Under "Local security setting" under "Local Policies" Under "User right Assignment" Under "Log on as a Batch job" I added the User name which was created when weload the Vista for the first time which is the Computer Admin, ALSO REALOADED THE COMPUTER WITH TH FACTORY SETTING AND AFTER THE FIST BOOT, UNLOCKED THE "ADMINISTRATOR" USER OF THE OS AND TESTED WITH THE ADMIN USER AS WELL WHICH WAS ADDED TO THIS lOG ON AS A BATCH JOB.
4. Restarted the Computer on all the step that I had to
5. Downloaded the DB and installed the DB, it installled without any Error
******************My Questions are as belooooowww ******************
When Oracle installd he prduct, usually under the
Start menu> All programs we should have 4 folders (Application Development, Configuration and Migration, Integrated management tools, Oralce installlation products) and DATABASE CONTROL - ORCL
a - when installation finishesh it JSUT DOESN't CREATE ------> DATABASE CONTROL - ORCL Whyyyyy ? (It is driving me crazy, I have another xp machine and it has also I had EVEN Vista Home premium and I was able to install on it before to test)
b - I can loging to the database after i type the adress I remembered manually in the browser, it logs in without any errror, but
When I want to shutdown the database It passes the host crendential once and I wait and it does nothing and a little windown pops up and says
*"Enterprise manager stopped working"*
C - To test and stop Listener also it just doesn't stop it and doest the samething,
I just wannna CRYYY, it is getting me Crazy,
PLEASE HELP ME with all THREE QUESTONS A,B,C PLEASE HELLLLLLPPPPP
Rgrds,
Maybe you are looking for
-
An error occurred in the source system, DBIF_RSQL_SQL_ERROR
Dear All, last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4. the error i found Error message from the source system Diagnosis An error occurred in the source system. System Response Caller 09 conta
-
Create Accessible Forms in Acrobat Pro XI/Forms Central
Hello FormCentral Development Team - I read a previous thread that FormsCentral does not create Accessible Forms (Section 508 or WCAG 2.0) and must be made accessible in Acrobat Pro XI by a series of steps in the software. However, when I tried to fo
-
I guess this is a question for mozilla dev.
-
Is there any way to scale a photo one way for a slideshow and crop it another way for a book without changing the original or making a copy of it?
-
GPS data lost in Aperture 3.0.3 created .psd file
I shooting RAW with a Nikon D700 and GPS unit. The GPS data shows up in Aperture 3.0.3, but when "Edit with Adobe Photoshop CS5" is selected in the Photos menu, the resultant .psd file has no GPS data. If I import into CS5 with Adobe Camera Raw, the