Oracle Lite: How to create data subsetting parameters?

I need to know:
how to create data subsetting parameters?
I need these parameters for use of a restricting predicate in an item publication.
I were looking the forum and i found topics about "how to set?" but i don't found how to create a data subsetting parameter.
I am replacing SQL server 2000 and SQL server CE by oracle 9i and oracle lite 5.0.2.
Thanks in advance.
PCID

Had problems with the parameters shown on pages webtogo in the datasubsettings section because none of them were "defined", but in sections 1.4.1.2 I found these lines:
Template: select * from master.task where CustCity = :city
Then click OK. This brings you back to the previous screen. The template query contains a variable (subscription parameter) named "city". Later, when you provision the application to a user, you will be prompted to enter the value for it.
I found out how to put a parameter to restrict registries that download to the pocket pc from each user.
Thank you very much!!!

Similar Messages

How to set Data Subsetting Parameters in MOBILE SERVER

Hello.
How can I set data subsetting parameters in Mobile Server with patch 5.0.2.10.0 NLS.
From Mobile Server "Control Center" -> "Applications" it's not appears at left screen the following field:
* Data Subsetting
* Registry
* Access
* Files
The browser appears this error message:
"http://120.0.0.1:2000/webtogo/admin/console/apppropinfo?applicationvp=%2FMyApp"
Have you any idea for this problem?
Thanks All.

Thanks Oliver,
I have to go in control center in "applications tab" then i have the list of application and i edit one of them, on the left clic Data Subsetting it's not appears.
The following it not appears:
* Data Subsetting
* Registry
* Access
* Files
The browser (internet explorer) appears (at buttom on the left browser) this error message:
"error http://127.0.0.1:2000/webtogo/admin/console/apppropinfo?applicationvp=%2FMyApp missing link".
Whereas (Oliver's solution) in Mobile Server "Control Center" -> "Users Tabs"
i have the list of users go and i edit one of them, on the left clic Data Subsetting then clic on the right pan platform and then i see but not parameter are definited.
Help me please.

Data Subsetting parameters

Hello,
Where does Oracle store the data subnetting parameters in the "Mobileadmin" schema? I'd like to know so I can validate the parameter for each user without having to go through each one on the Mobile Manager.
Thank you.

The data subsetting parameters used in each publication item are stored in c$all_pub_params.
The values for each user are in c$all_subscription_params
NOTE do not change directly through the database, as this would not work correctly. these tables do not have public grants by default, so if you want to examine the data programatically (we do as part of application publishing), then you will need to grant access/create synonyms if you code does not run as mobileadmin

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

I'm debutante in oracle 10g how to create a database with picture?

I'm debutante in oracle 10g how to create a database with picture? help please

d7401ec1-d4d6-4e54-9eb4-2181ac367d0c wrote:
I'm debutante in oracle 10g how to create a database with picture? help please
Oracle 10g is obsolete. Oracle 11g is already at terminal release.
Have you installed the Oracle rdbms software?
Installing Oracle and Building the Database
If you are going to be a professional DBA, you need to learn to
1) read the documentation
2) wean yourself from dependence on pictures and GUIs.
3) read the documentation
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to docs.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- *Read a chapter a day from the Concepts Manual*.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- *When you have finished reading the Concepts Manual, do it again*.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

How to create data stores in ODI ?

Hi all,
I am new to this ODI part.Can anyone please help me as how to create data stores in ODI.
A prompt reply will be highly aprreciated.
Thanks
Saurabh.

What do you mean by "create datastores"?
If you mean you want to reverse engineer existing tables from a database, then the phrase used in the ODI docs is "reverse enginnering". If you mean to create new tables in a database, then:
1) ODI is not meant to be a database design tool.
2) Using the "diagrams" node under a data model, you are able to use the "Common Format Designer" (CFD) tool to design and create the structure. The CFD tool is a simple ER-digram tool, but importantantly, if you drag structures in from one model to another, it remembers where it came from, allowing automatic generation of interfaces, and it automatically translates the data types.

How to create data transfer and copying requirements

Hi Gurus,
Can you tell me how to create data transfer and copying requirements in copying control for SD?
Thanks,
pAUL

Hi John,
Go to Transaction code - VOFM.
In the menu select Data Transfer and select where you want maintain the copying requirements i.e. at the order level, delivery level etc.
Here, you can either create a new routine or change the existing routine according to your requirement.
Make sure you activate the routine (click on Edit - Activate from menu) once you are done with the routine.
REWARD POINTS IF HELPFUL
Regards
Sai

HOW TO CREATE DATA SOURCE FOR MAXDB

hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
Guru

The following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm

How to create messages with parameters In ADF model.

In ADF model, How to create messages with parameters?

To Create messages in message bundles with parameters, perform the steps as given below
Scenario: To Create a message as "Department Name XXXXXXX is already existing "
Step#1: For the given entity object “DepartmentEO”, Go to “overview” tab and click “Business Rules” finger tab.
Step#2: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#3: Now go to “Failure Handling” tab, and click the Magnifier Icon.
Step#4: Now in the “Display Value” field, enter the message with flower-braces as below.
Department Name {department_name} is already existing
Step#5: Also modify the Key & Description fields as needed. And click “Save and Select” button.
Step#6: Now go to “Token Message Expressions” section, double-click the Expression field corresponding to "department_name" & give the relevant Attribute names say "DepartmentName"
Step#7: Now click “OK”.

Oracle forms how to create excel format report

hello :)
these are my codes that generates report in live previewer. my problem is how to create an excel report producing the same output i can get in live previewer.
Declare
     pl_id ParamList;
     v_alrt number;
     v_acct_ent_date date;
     v_start_date date;
     v_end_date date;
     v_end_date1 date;
     v_end_date2 date;
     v_end_date3 date;
     v_end_date4 date;
     iss_group varchar2(100);
     monthidentify date;
Begin
     SELECT B.USER_GRP
     INTO ISS_GROUP
     FROM GIIS_USERS A,GIIS_USER_GRP_HDR B
     WHERE A.USER_GRP = B.USER_GRP
     AND A.USER_ID = USER;
Select max(acct_ent_date)
INTO v_acct_ent_date
FROM gipi_polbasic;
     SELECT TRUNC(ADD_MONTHS(SYSDATE, -24))
     INTO v_end_date1
     FROM DUAL;
     select LAST_DAY(:FILTERS.FROM_DATE)
     INTO V_END_DATE2
     FROM DUAL;
     SELECT TRUNC (TO_DATE (:FILTERS.END_DATE), 'MONTH')
     INTO V_END_DATE3
     FROM DUAL;
IF :FILTERS.FROM_DATE IS NULL THEN
          MESSAGE('Please Enter a starting date in the format "MM/DD/YYYY"');
     MESSAGE('Please Enter a starting date in the format "MM/DD/YYYY"');
     GO_ITEM('FILTERS.FROM_DATE');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.END_DATE IS NULL THEN
     MESSAGE('Please enter an Ending date in the format "MM/DD/YYYY"');
     GO_ITEM('FILTERS.END_DATE');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.FROM_DATE > :FILTERS.END_DATE THEN
     MESSAGE('Starting Date cannot be greater than Ending Date');
     MESSAGE('Starting Date cannot be greater than Ending Date');
     :FILTERS.FROM_DATE := NULL;
     :FILTERS.END_DATE := NULL;
     GO_ITEM('FILTERS.FROM_DATE');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.DATE_FILTER = 'AED' and :FILTERS.FROM_DATE > v_acct_ent_date and
          :FILTERS.END_DATE > v_acct_ent_date then
          MESSAGE('No premium batch production occured between the given dates');
     MESSAGE('No premium batch production occured between the given dates');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
IF ISS_GROUP <> 2 or USER = 'MKMIF' THEN
/* IF :FILTERS.END_DATE <> V_END_DATE2 THEN
          MESSAGE('DATE PARAMETER SHOULD BE EXACTLY 1 MONTH');
          MESSAGE('DATE PARAMETER SHOULD BE EXACTLY 1 MONTH');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.FROM_DATE <> V_END_DATE3 THEN
          MESSAGE('FROM DATE PARAMETER SHOULD BE THE FIRST DAY OF THE MONTH');
          MESSAGE('FROM DATE PARAMETER SHOULD BE THE FIRST DAY OF THE MONTH');
     Raise FORM_TRIGGER_FAILURE;
     END IF;*/
     IF :FILTERS.FROM_DATE < V_END_DATE1 THEN
          MESSAGE('FROM DATE SHOULD BE 2 YEARS BEFORE OR 2 YEARS BETWEEN THE SYSTEM DATE');
          MESSAGE('FROM DATE SHOULD BE 2 YEARS BEFORE OR 2 YEARS BETWEEN THE SYSTEM DATE');
          Raise FORM_TRIGGER_FAILURE;
     END IF;
END IF;
IF :FILTERS.DATE_FILTER = 'AED' THEN
     BEGIN
     Select acct_ent_date
     INTO v_acct_ent_date
     from gipi_polbasic where acct_ent_date between :FILTERS.FROM_DATE and :FILTERS.END_DATE;
     EXCEPTION
          When TOO_MANY_ROWS Then
          Null;
          When No_Data_Found Then
          Message('Premium batch productions can only be done at the end of the month. Kindly check the dates you entered.');
          Message('Premium batch productions can only be done at the end of the month. Kindly check the dates you entered.');
          Raise Form_Trigger_Failure;
     END;
END IF;
     v_alrt := show_alert('PRINT_ALERT');
     IF v_alrt = alert_button1 then
               pl_id:= Get_Parameter_List('tmpdata');
               IF NOT ID_NULL(pl_id) then
                    DESTROY_PARAMETER_LIST(pl_id);
               END IF;
               pl_id:=Create_parameter_List('tmpdata');
                    Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
                    Add_Parameter(pl_id,'start_date',TEXT_PARAMETER,TO_CHAR(:FILTERS.FROM_DATE,'MM/DD/RRRR'));
                    Add_Parameter(pl_id,'end_date',TEXT_PARAMETER,TO_CHAR(:FILTERS.END_DATE,'MM-DD-RRRR'));
                    Add_Parameter(pl_id,'CREDITING_BRANCH',TEXT_PARAMETER,:FILTERS.BRANCH_CODE);
                    Add_Parameter(pl_id,'LINE_CODE',TEXT_PARAMETER,:FILTERS.LINE_CD);
                    Add_Parameter(pl_id,'INTERMEDIARY_NAME',TEXT_PARAMETER,:FILTERS.INTM_NAME);
                    Add_Parameter(pl_id,'INTERMEDIARY_TYPE',TEXT_PARAMETER,:FILTERS.INTM_TYPE);
          IF :FILTERS.Date_Filter = 'AED' then
               RUN_PRODUCT(REPORTS, 'PREM_PROD_AEDALL.rep' ,SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
          elsif :FILTERS.Date_Filter = 'ED' then
          RUN_PRODUCT(REPORTS, 'PREM_PROD_EDALL.rep' ,SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
          End IF;
          END IF;
End;
-------------------------------------------------------------------------------------------------------------------------------------------------------------------

Hello,
build a standard report using REPORT BUILDER (Oracle 10g Release 2)
set
DESFORMAT=SPREADSHEET
Regards,
Tarun

Strange oracle lite error when create db

i am new to oracle lite and been playing about but this error really confuses me
C:\>createdb mydb mydb doug
Oracle Lite CREATEDB Version 10.2.0.1.0.
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Database C:\ORACLE\10GLITE\MOBILE\SDK\OLDB40\MYDB.odb created (VolID = 507).
C:\>msql system/doug@jdbc:polite:mydb
Oracle Lite MSQL Version 10.2.0.1.0
Copyright (c) 1997, 2005, Oracle. All rights reserved.
[POL-3023] the database does not exist
so it says it creates the db fine but wont let me connect

Check whether there is a corresponding entry made for that DSN in your odbc.ini
If no, make an entry in that file and then try connecting.
Minimally it should consist of something like this... ( for createdb oracle oracle oracle)
[ODBC 32 bit Data Sources]
oracle=Oracle Lite 40 ODBC Driver (32 bit)
[oracle]
Description=Oracle Lite 40 Data Source
DataDirectory=/private/orainst/MDK/mobile/sdk/oldb40
Database=oracle
-vv
null

How to create Data source in BI7( r/3 extraction)

Hi,
I have created the data source(z_emp_data) at r/3 side and transported in rsa6.
could any one let me know how to create the data source at Bi 7 end? should i create the same data source(z_emp_data) at BI 7 end? i have created the table at r/3 from which i want to load data.....please give step step details..its very urgent....
Thanks
Manjula

Activate it, Create a transformation to the target infoprovider, Create a DTP to schedule the transformation.
You will also have to create an infopackage to get the data from the source system into the BI system.
There are a lot of "stuff" to do with datasources!

How to create Data Template for creation of BI Pulisher Report

Hi,
I m having all the steps for creation of BI Pulisher report using Data Template, like 1st create Data Template, Add new Data Definition, upload Data Template, Create Concurrent Program and run the request, save o/p and create rtf layout, upload Template and again run Concurrent program to view output.
All steps are working fine.. but my simple question is every time we need to write code for Data Template i.e. xml file ? is there is tool or something which will create this Data template for us using rdf? or is there any other way ?
Please guide ..
Regards,
Priyanka.

Hi;
Please see below note which could be helpful for your issue:
NOTE:367394.1 - About Oracle XML Publisher Release 5.6.2
Also see:
http://www.adivaconsulting.com/adiva-blog/item/5-datatemplate
http://apps2fusion.com/at/51-ps/262-xml-publisher-and-data-template-sql-query-to-develop-bi-publisher-reports
http://blogs.oracle.com/xmlpublisher/data_extraction/data_templates/
Regard
Helios

How to create Data Connection in PDF forms??

Hi Experts,
I am working on PCR forms(Adobe forms), I want to customize those forms as per the requirement.
Problem is that I don't know how to create New Data Connection with the field in DATA VIEW.
Thanks
Rohit G

>
Rohit Gaharwar wrote:
> Hi Experts,
>
> I am working on PCR forms(Adobe forms), I want to customize those forms as per the requirement.
> Problem is that I don't know how to create New Data Connection with the field in DATA VIEW.
>
> Thanks
> Rohit G
Hi Rohit
are you working with interactive forms inside Web Dynpro? If so, Web Dynpro will create the data connection for you. The only thning you have to do is setting the "data sorurce" and "pdf source" in the properties tab of the interactive forms layout element. See for example here: Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken]#50 [original link is broken] or other tutotials on web Dynpro and interactive forms : Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken]
If you don't work with Web Dynpro, you can create a data connection as follows:
1. Open your *xdp-Template (Doubleclick: Lifecycle Designer is starting
2.Click on File-> New Data Connection.
3, Create the data Connection with the wizard, Your source can be
a) XML Schema
b) OLEDB Database
c) WSDL file
Hope this helps. Please reward points if helpful
Kind regards
Bettina
Edited by: Bettina Hepp on Jun 4, 2008 4:53 PM

Oracle Lite: How to create data subsetting parameters?

Similar Messages

Maybe you are looking for