Oracle ODBC Driver (Windows 2003 x64 Server)

Hi all
I have some trouble with this ODBC Driver ...
I have installed Oracle Client 10.2.0.1.0 with the ODBC Driver and SQLplus etc.
Now I have configured in the "Net Manager" some "Service Naming" as I did
on other servers before. Then I Test the connection in the "Net Manager" it
seams to work fine.
When I now try to connect in SQL Plus the following error comes up:
ORA-12154: TNS:could not resolve the connect identifier specified
I did already do this:
- Add "...\NETWORK\ADMIN" to the Path Variable of the server
- sqlnet.ora looks like:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- tnsnames.ora looks like:
MyName.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myDomain.net)(PORT = 1521))
(CONNECT_DATA =
(SID = DBSIDxx)
What do I have to do to get this working ???
Thanks for any comments!
Best regards
Frank Uray

Nevermind, I think I'm to assume that this is the same as:
Re: unable to use SQL Plus (Windows 2003 x64 Server)

Similar Messages

Can not see Oracle ODBC driver in Ms SQL Server 2007

Hi
I am trying to export an ms sql server table to Oracle using the Ms SQL Server 2007 export wizard and the only driver I found in the list is Microsoft OLEDB Provider for Oracle.
I already installed Oracle client and I addedd an ODBC conenction of the datasources Why can I not see the Oracle ODBC driver?

Which version of Oracle and what kind of Client Install
Are you sure you did the full Client Install which will have ODBC ?
Execute odbcad32 and look under Drivers Tab for Oracle ODBC Driver

How to configure windows 2003 x64 server to run CFUSION MX7

1.If you install Internet Information Services (IIS) on a
computer that is
running Windows Server 2003 x64 Edition, IIS must be
configured to run in
32-bit emulation mode. To do this, follow these steps on each
front-end Web
server that is running Windows Server 2003 x64 Edition:a.
Click Start,
click Run, type cmd, and then click OK.
b. At the command prompt, move to the
%drive%:\Inetpub\Adminscripts
folder. Note that %drive% is the drive on which Windows
Server 2003 is
installed.
c. In the Adminscripts folder, type the following command,
and then
press ENTER:
cscript adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64
1
Note The value "1" for Enable32bitAppOnWin64 specifies
32-bit mode.
The value "0" specifies 64-bit mode.
d. Type iisreset, and then press ENTER.
e. Close the Command Prompt window.

Thank you sir.
BTW, if this enables 32 bit emulation mode, does that mean it
runs both 32 bit & 64 bit extensions, or just 32 bit
extensions?

Unable to use SQL Plus (Windows 2003 x64 Server)

Hi all
I have some trouble with tnsname.ora ...
I have installed Oracle Client 10.2.0.1.0 with the ODBC Driver and SQLplus etc.
Now I have configured in the "Net Manager" some "Service Naming" as I did
on other servers before. Then I Test the connection in the "Net Manager" it
seams to work fine.
When I now try to connect in SQL Plus the following error comes up:
ORA-12154: TNS:could not resolve the connect identifier specified
I did already do this:
- Add "...\NETWORK\ADMIN" to the Path Variable of the server
- sqlnet.ora looks like:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- tnsnames.ora looks like:
MyName.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myDomain.net)(PORT = 1521))
(CONNECT_DATA =
(SID = DBSIDxx)
I am accessing like MyName.WORLD ...
What do I have to do to get this working ???
Thanks for any comments!
Best regards
Frank Uray

1) Please verify that there is only one tnsnames.ora file on your system.
If there are several (other than in 'samples' directories), please make them all look the same and try again.
2) If not, please post the contents of your tnsnames.ora AND sqlnet.ora files.
Message was edited by:
forbrich
Re-read your original message and noteiced you posted the tnsnames.ora stuff.
Your alias is 'MyName.world', therefore you want to access using the connect string such as
SQLPLUS system/[email protected]
If you want to use SQLPLUS system/password@myname (no .world) then either remove it from the alias or add the default_domain info in sqlnet.ora

Oracle 11.1.0.7.0 patch 5 for windows 2003 x64.. Please help.

Hello All
I have Oracle EE 11.1.0.7.0 running on Windows 2003 x64 server plus ASM, and I want to apply patch 5, so that it becomes 11.1.0.7.5.
I came to know from Oracle Support Services, Windows patche comes as bundled patchset, but I am not sure which patch to apply, there are 38 of them. Is 11.1.0.7.5P the correct one?.
Patchset Avaialble:
11.1.0.7.0 Patch 38 (11.1.0.7.38P) 32-Bit Patch:11741169 64-Bit (x64) Patch:11741170
11.1.0.7.0 Patch 37 (11.1.0.7.37P) 32-Bit Patch:10636464 64-Bit (x64) Patch:10636465
11.1.0.7.0 Patch 36 (11.1.0.7.36P) 32-Bit Patch:10350787 64-Bit (x64) Patch:10350788
11.1.0.7.0 Patch 35 (11.1.0.7.35P) 32-Bit Patch:10245099 64-Bit (x64) Patch:10245101
11.1.0.7.0 Patch 34 (11.1.0.7.34P) 32-Bit Patch:10168052 64-Bit (x64) Patch:10168056
11.1.0.7.0 Patch 33 (11.1.0.7.33P) 32-Bit Patch:9773817 64-Bit (x64) Patch:9773825
11.1.0.7.0 Patch 32 (11.1.0.7.32P) 32-Bit Patch:9930894 64-Bit (x64) Patch:9930895
11.1.0.7.0 Patch 31 (11.1.0.7.31P) 32-Bit Patch:9846179 64-Bit (x64) Patch:9846180
11.1.0.7.0 Patch 30 (11.1.0.7.30P) 32-Bit Patch:9869911 64-Bit (x64) Patch:9869912
11.1.0.7.0 Patch 29 (11.1.0.7.29P) 32-Bit Patch:9718019 64-Bit (x64) Patch:9718020
11.1.0.7.0 Patch 28 (11.1.0.7.28P) 32-Bit Patch:9707661 64-Bit (x64) Patch:9707665
11.1.0.7.0 Patch 27 (11.1.0.7.27P) 32-Bit Patch:9604444 64-Bit (x64) Patch:9604446
11.1.0.7.0 Patch 26 (11.1.0.7.26P) 32-Bit Patch:9523179 64-Bit (x64) Patch:9523181
11.1.0.7.0 Patch 25 (11.1.0.7.25P) 32-Bit Patch:9392331 64-Bit (x64) Patch:9392335
11.1.0.7.0 Patch 24 (11.1.0.7.24P) 32-Bit Patch:9384493 64-Bit (x64) Patch:9384497
11.1.0.7.0 Patch 23 (11.1.0.7.23P) 32-Bit Patch:9264211 64-Bit (x64) Patch:9264214
11.1.0.7.0 Patch 22 (11.1.0.7.22P) 32-Bit Patch:9166858 64-Bit (x64) Patch:9166861
11.1.0.7.0 Patch 21 (11.1.0.7.21P) 32-Bit Patch:9082702 64-Bit (x64) Patch:9082709
11.1.0.7.0 Patch 20 (11.1.0.7.20P) 32-Bit Patch:9025140 64-Bit (x64) Patch:9025144
11.1.0.7.0 Patch 19 (11.1.0.7.19P) 32-Bit Patch:8928976 64-Bit (x64) Patch:8928977
11.1.0.7.0 Patch 18 (11.1.0.7.18P) 32-Bit Patch:8832980 64-Bit (x64) Patch:8832986
11.1.0.7.0 Patch 17 (11.1.0.7.17P) 32-Bit Patch:8783655 64-Bit (x64) Patch:8783657
11.1.0.7.0 Patch 16 (11.1.0.7.16P) 32-Bit Patch:8689191 64-Bit (x64) Patch:8689199
11.1.0.7.0 Patch 15 (11.1.0.7.15P) 32-Bit Patch:8655458 64-Bit (x64) Patch:8655460
11.1.0.7.0 Patch 14 (11.1.0.7.14P) 32-Bit Patch:8603948 64-Bit (x64) Patch:8603952
11.1.0.7.0 Patch 13 (11.1.0.7.13P) 32-Bit Patch:8553512 64-Bit (x64) Patch:8553515
11.1.0.7.0 Patch 12 (11.1.0.7.12P) 32-Bit Patch:8508245 64-Bit (x64) Patch:8508247
11.1.0.7.0 Patch 11 (11.1.0.7.11P) 32-Bit Patch:8451592 64-Bit (x64) Patch:8451598
11.1.0.7.0 Patch 10 (11.1.0.7.10P) 32-Bit Patch:8416539 64-Bit (x64) Patch:8416540
11.1.0.7.0 Patch 9 (11.1.0.7.9P) 32-Bit Patch:8343061 64-Bit (x64) Patch:8343070
11.1.0.7.0 Patch 8 (11.1.0.7.8P) 32-Bit Patch:8297200 64-Bit (x64) Patch:8297201
11.1.0.7.0 Patch 7 (11.1.0.7.7P) 32-Bit Patch:8260294 64-Bit (x64) Patch:8260301
11.1.0.7.0 Patch 6 (11.1.0.7.6P) 32-Bit Patch:8219259 64-Bit (x64) Patch:8219268
*11.1.0.7.0 Patch 5 (11.1.0.7.5P) 32-Bit Patch:7712568 64-Bit (x64) Patch:7712570*
11.1.0.7.0 Patch 4 (11.1.0.7.4P) 32-Bit Patch:7682184 64-Bit (x64) Patch:7682189
11.1.0.7.0 Patch 3 (11.1.0.7.3P) 32-Bit Patch:7664953 64-Bit (x64) Patch:7675231
11.1.0.7.0 Patch 2 (11.1.0.7.2P) 32-Bit Patch:7586190 64-Bit (x64) Patch:7586195
11.1.0.7.0 Patch 1 (11.1.0.7.1P) Only available in 32-Bit Patch:7540527
Any help would be great.
Regards
Amit

Hi All
I have applied this patch 38 for Oracle 11.1.0.7.0 on Windows 2003 x64 bit server today but the database version from v$version didn't change at all and still its showing 11.1.0.7.0, I expected it to show 11.1.0.7.5.
Any suggestions.
Regards
Amit

Oracle ODBC Driver Connect window appears frequently

prashant wrote:
hi
I am running an application wriiten in vc++.I have installed the
application at the remote client end
succesfully.Initaily set the DSN for Oracle (10g exe) .When I start
using application I get "oracle ODBC Driver Window" after regular
intervals.
why this window is appearing frequently when i set the DSN initally and
tested succesfully.
pls help!!!

Oracle doesn't produce such a beast. Microsoft provides a lot of important ODBC infrastructure on Windows that driver writers rely on which isn't available on Linux.
There are third parties that have developed ODBC drivers for Oracle on Linux. There's an open source project at <http://www.unixodbc.com> that you might be able to use. Companies like Merant may also provide drivers.
Justin

Apache gets installed together with Oracle 11G on my Win2003 x64 server?Rem

Hi all,
I just installed Oracle 11G on my Windows 2003 x64 server.
It seems that it has also installed Apache on it and took over my port 80 on which i would like to run IIS.
Can anyone please advice on how i can either remove apache or if it is needed by oracle then at least change the port so i can have my port 80 back.
I had a browse around but i could not find any configuration files easily.
Looking forward to your response.
Cheers
Dan

When i do netstat -a i get:
Proto Local Address Foreign Address State
TCP wolslice:http wolslice:0 LISTENING
TCP wolslice:epmap wolslice:0 LISTENING
TCP wolslice:microsoft-ds wolslice:0 LISTENING
TCP wolslice:1030 wolslice:0 LISTENING
TCP wolslice:1033 wolslice:0 LISTENING
TCP wolslice:1035 wolslice:0 LISTENING
TCP wolslice:1158 wolslice:0 LISTENING
TCP wolslice:1830 wolslice:0 LISTENING
TCP wolslice:ms-wbt-server wolslice:0 LISTENING
TCP wolslice:3938 wolslice:0 LISTENING
TCP wolslice:5500 wolslice:0 LISTENING
TCP wolslice:5520 wolslice:0 LISTENING
TCP wolslice:5521 wolslice:0 LISTENING
TCP wolslice:netbios-ssn wolslice:0 LISTENING
TCP wolslice:1189 wolslice:1521 ESTABLISHED
TCP wolslice:1231 wolslice:1521 ESTABLISHED
TCP wolslice:1384 wolslice:1521 ESTABLISHED
TCP wolslice:1385 wolslice:1521 ESTABLISHED
TCP wolslice:1390 wolslice:1521 ESTABLISHED
TCP wolslice:1392 wolslice:1521 ESTABLISHED
TCP wolslice:1393 wolslice:1521 ESTABLISHED
TCP wolslice:1394 wolslice:1521 ESTABLISHED
TCP wolslice:1395 wolslice:1521 ESTABLISHED
TCP wolslice:1396 wolslice:1521 ESTABLISHED
TCP wolslice:1397 wolslice:1521 ESTABLISHED
TCP wolslice:1398 wolslice:1521 ESTABLISHED
TCP wolslice:1400 wolslice:1521 ESTABLISHED
TCP wolslice:1402 wolslice:1521 ESTABLISHED
TCP wolslice:1403 wolslice:1521 ESTABLISHED
TCP wolslice:1404 wolslice:1521 ESTABLISHED
TCP wolslice:1417 wolslice:1521 ESTABLISHED
TCP wolslice:1521 wolslice:0 LISTENING
TCP wolslice:1521 wolslice:1189 ESTABLISHED
TCP wolslice:1521 wolslice:1231 ESTABLISHED
TCP wolslice:1521 wolslice:1384 ESTABLISHED
TCP wolslice:1521 wolslice:1385 ESTABLISHED
TCP wolslice:1521 wolslice:1390 ESTABLISHED
TCP wolslice:1521 wolslice:1392 ESTABLISHED
TCP wolslice:1521 wolslice:1393 ESTABLISHED
TCP wolslice:1521 wolslice:1394 ESTABLISHED
TCP wolslice:1521 wolslice:1395 ESTABLISHED
TCP wolslice:1521 wolslice:1396 ESTABLISHED
TCP wolslice:1521 wolslice:1397 ESTABLISHED
TCP wolslice:1521 wolslice:1398 ESTABLISHED
TCP wolslice:1521 wolslice:1400 ESTABLISHED
TCP wolslice:1521 wolslice:1402 ESTABLISHED
TCP wolslice:1521 wolslice:1403 ESTABLISHED
TCP wolslice:1521 wolslice:1404 ESTABLISHED
TCP wolslice:1521 wolslice:1417 ESTABLISHED
TCP wolslice:1521 wolslice:1682 ESTABLISHED
TCP wolslice:1521 wolslice:1770 ESTABLISHED
TCP wolslice:1521 wolslice:3366 ESTABLISHED
TCP wolslice:1521 wolslice:3367 ESTABLISHED
TCP wolslice:1521 wolslice:3771 TIME_WAIT
TCP wolslice:1521 wolslice:3791 ESTABLISHED
TCP wolslice:1682 wolslice:1521 ESTABLISHED
TCP wolslice:1770 wolslice:1521 ESTABLISHED
TCP wolslice:3366 wolslice:1521 ESTABLISHED
TCP wolslice:3367 wolslice:1521 ESTABLISHED
TCP wolslice:3784 wolslice:1521 TIME_WAIT
TCP wolslice:3791 wolslice:1521 ESTABLISHED
TCP wolslice:1380 wolslice:1381 ESTABLISHED
TCP wolslice:1381 wolslice:1380 ESTABLISHED
TCP wolslice:1382 wolslice:1383 ESTABLISHED
TCP wolslice:1383 wolslice:1382 ESTABLISHED
TCP wolslice:3336 wolslice:0 LISTENING
UDP wolslice:microsoft-ds *:*
UDP wolslice:isakmp *:*
UDP wolslice:ipsec-msft *:*
UDP wolslice:ntp *:*
UDP wolslice:netbios-ns *:*
UDP wolslice:netbios-dgm *:*
UDP wolslice:ntp *:*
I cant see which one of those would be the apache started by oracle.
I also checked the lsit of running services and i cant see it there.
But when i browse to http://localhost i get:
Index of /
Name Last modified Size Description
wpad.dat 05-Nov-2009 16:41 2.3K
Apache/2.2.11 (Ubuntu) Server at localhost Port 80
My apologies if this is simple stuff. I am just a begginer with Oracle.

SQL Developer on Windows 2003 x64 Edition "failed to initialize..."

I am trying to run sqldeveloper on Windows server 2003 x64 and I get the following error:
The application failed to initialize properly (0xc0000018). Click on OK to terminate the application.
I get this error with the version with jre, and with the version without the jre.
I have Java 1.6 installed on that server (applet shows up under x86 control panels)
I can reproduce this on two different win 2003 x64 servers, but it works fine on a windows 2003 standard (32 bit)
Any idea how to fix this?
thanks.

This might not be the right place to post this question, but will give it a shot . . .
I've installed JDK 1.5 and downloaded/unzipped SQL Developer on my Windows 2003 x64 server, then launched sqldevelper.bat from the advice given above -- but I get an error saying:
'java' is not recognized as an internal or external command,operable program or batch file.
I made sure I have java installed:
C:\Program Files (x86)\Java>dir
Volume in drive C has no label.
Volume Serial Number is A86A-1831
Directory of C:\Program Files (x86)\Java
03/29/2007 07:29 PM <DIR> .
03/29/2007 07:29 PM <DIR> ..
03/26/2007 06:01 PM <DIR> j2re1.4.2_12
03/29/2007 07:24 PM <DIR> jdk1.5.0_05
03/29/2007 07:25 PM <DIR> jre1.5.0_05
03/29/2007 07:29 PM <DIR> jre1.5.0_11
What am I doing wrong, that would cause 'java' is not recognized as an internal or external command,operable program or batch file?

Oracle ODBC Driver for Rdb 2.10.11.00 on Windows 2008 64-bit

Hello,
Our application runs on Windows 2000 Professional SP4 and connects to RDB databases on Alpha Open/VMS via Oracle ODBC Driver fro Rdb release 2.10.11.00.
We are migrating to Windows Server 2008 64-bit environment.
We tested both recent Rdb ODBC driver releases (3.3.0.0 and 3.3.1.0) but we are getting errors intermittently when the application loads data from certain tables. Trace logs show no errors which could indicate the origin of the issue.
We want to use the old (2.10.11.00) release but it cannot be installed only on the Win 2008 32-bit version.
Can anyone suggest how to install the Oracle ODBC Driver for Rdb release 2.10.11.00 on a Windows 2008 64-bit Server?
Thanks in advance,
Momir

Hello,
Take a loot at http://www.connx-net.com/rdb.htm they have a 64 bit ODBC OLE DB JBC and .NET solution.
Regards,
Ant

How to install oracle 9iASR2 on windows 2003 server

Hi,
I want to install oracle 9iasr2 on windows 2003 server. Pl guide.
Arvind

I want to install following component
Oracle 9i form server & report server
Oracle HTTP Server in SSL mode
Oracle As Web Cache
Regards
Arvind

How can I do to get Oracle ODBC driver in Windows?

Hello,
Please, I need help to use Oracle ODBC driver in Windows 7. I installed Oracle Client 10g with the ODBC driver, but I can't use it. OracleODBC driver don't appear in the driver list when I want to create a new datasource. How I can do to get Oracle ODBC driver for create a new datasource?
Thank
Edited by: user4528703 on 13 mars 2010 02:01

Hello,
To get the ODBC driver you should run a custom Oracle Client installation and Select
Oracle Windows Interfaces 10.2.0.1.0.
Then, you'll get the Oracle ODBC Driver 10.2.0.1.
But, be aware that Oracle didn't certify Windows 7.
So, if afterwards, you experience some trouble, think to install Oracle with Xp compatibilty mode, or
wait to Oracle 11.2.0.1 which will be certified on Windows 7.
Hope this help.
Best regards,
Jean-Valentin

Is the Oracle ODBC Driver 10.2.0.5.0 certified for Windows 7 (32bit)

For this question my client needs a reliable answer when their global IT migrates all Windows clients to Win7.
Now, Support Note 1061272.1 says Oracle Client 10.2.0.5.0 IS certfified on Win7 32bit.
But, Support Note ID 66403.1 says Oracle ODBC Driver 10.2.0.5.0 is NOT certified on Win7.
Does anyone one know, what counts?
Is (A) Note 1061272.1 right because ODBC is part of the client and note 66403.1 is simply outdated or inaccurate, or
is (B) note 66403.1 correct, because the ODBC driver is certified seperately?
Thanks for suggestions (or better: statements from Oracle), otherwise I have to open an SR.
Kai

10205 is certified on Win7, 66403.1 will be corrected.
Greg

Oracle 9i rac windows 2003 server

Hai,
I am planning to do oracle 9i rac windows 2003 server(enterprise edition service pack 2) installion. All the pre-requiste has been completed. At the time of running clustersetup.exe , it is exiting without showing an error. The event veiwer is having the below mentioned details.
Event Type:     Information
Event Source:     DrWatson
Event Category:     None
Event ID:     4097
Date:          4/8/2011
Time:          3:05:13 PM
User:          N/A
Computer:     IBDB1
Description:
The application, C:\preinstall_rac\clustersetup\clustersetup.exe, generated an application error The error occurred on 04/08/2011 @ 15:05:13.921 The exception generated was c0000005 at address 004014C1 (clustersetup)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any idea how to resolve this issue?
Regards
Sridhar

Windows 2003 is not listed as supported platform:
http://download.oracle.com/docs/html/A95493_01/reqs.htm#1101810
I would not try to install a desupported database version on an unsupported platform.

Cant install oracle 8i in windows 2003 server

hi,
I am a newbie in Oracle.While Im trying to install Oracle 8i in Windows 2003 server , setup is not running.It didn't show anything.When trying to run from auto run, after splash screen nothing came.I formatted hard disk,changed two more hard disks,.changed machine...but cant install it in no way... It is the same case in Windows XP home edition.
But it is running in one of my friend's machine(windows 2003 server)
Please help me with valuable solutions.
Thanks in advance

Did your friend install on W2003 or upgrade from an older version of the OS?
When trying to run programs on an OS that is not certified for the programs, it is hit-n-miss whether the OS actually has the support files needed for the programs.
Think about this: the Oracle environment needs OS support in the form of DLLs and other files. The contents of the DLLs are made visible as APIs. Each time Microsoft releases patches, it is possible that the APIs that Oracle used are changed. This is extremely true when a new version of the OS is released, and even more true with stripped versions such as XP Home.
If your friend installed and then applied patches, [s]he may have hit the proper API combination. If you appled patches first, you may have skootched your APIs to the point that Oracle can not longer install.
Even if you happen to get it installed, you run the risk of getting clobbered any time you install a new Microsoft patch. The risk is minimized when you use a certified combination of the OS and application.

Spool server on Windows 2003 x64 ?

Hi,
I'm installing SAP NetWeaver PI 7.1 on Windows 2003 x64 with MaxDB.
Printing Guide for SAP NetWeaver PI 7.1 states "For a Microsoft Windows XP host, choose access method C. other Microsoft Windows operating systems are not suitable for local printing, as you cannot set up a spool server on them."
However, by default, there is a spool server defined in my installation of SAP NetWeaver PI 7.1 on Windows 2003 x64. But I see plenty of "Spool / print: Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')" errors in the system log when the background processes run every night.
Printing Guide for SAP NetWeaver 7.0 talks about a SAP spool server running on "the Microsoft Windows NT/Windows 2000 system", suggesting that Windows systems other than XP are supported for local printing.
Is that correct? i.e. Has local printing support for Windows 2003 been removed in PI 7.1 ?
I'm surprised, and more than a little confused by this. I'd appreciate any help/explanation.
Regards,
Mark

Just a follow-up if anyone's interested...
I did try setting-up Access Method C in my NetWeaver 7.1 on Windows 2003 x64 with MaxDB and so far the local printing seems to be working OK. So, either:
a) The Printing Guide for SAP NetWeaver PI 7.1 is wrong on this issue.
b) The Printing Guide for SAP NetWeaver PI 7.1 is right, and this is an undocumented behavior that might break in the future.
c) I just got lucky (and I shouldn't look a gift horse in the mouth).
Also, Access Method G works fine.

Oracle ODBC Driver (Windows 2003 x64 Server)

Similar Messages

Maybe you are looking for