Oracle on NT (Logmnr and Internal User fail)
Hi,
My Environment is NT. I got two questions First, I have problem to use "Log Viewer"
DBMS_LOGMNR_D to create the dictionary file.
In the statement, I should have file name and file directory to generate the dictionary file. The problem is the file directoy format of NT and Unix is different, so I changed the file directory to the right format for NT. However, I tried several kinds of format. None of them works. So, does anyone knows the right format for "logmnrd" for NT?
Second, my test environment can not be logged in as internal user , system and sys. I am sure the password is correct, but at the time I connectted by them. I got the error message indicating me that "Insufficient Privilege". I don't know why? So the only way for me the shutdown the database is through the NT services.
Does any one know how to solve this?
Thanks in advance.
chechun
Hi,
My Environment is NT. I got two questions First, I have problem to use "Log Viewer"
DBMS_LOGMNR_D to create the dictionary file.
In the statement, I should have file name and file directory to generate the dictionary file. The problem is the file directoy format of NT and Unix is different, so I changed the file directory to the right format for NT. However, I tried several kinds of format. None of them works. So, does anyone knows the right format for "logmnrd" for NT?
Second, my test environment can not be logged in as internal user , system and sys. I am sure the password is correct, but at the time I connectted by them. I got the error message indicating me that "Insufficient Privilege". I don't know why? So the only way for me the shutdown the database is through the NT services.
Does any one know how to solve this?
Thanks in advance.
chechun
Similar Messages
-
Sponsor portal and internal users
Hi
I have configured on our ISE to use AD-users as sponsors. And this works perfect.
but I'm also trying to configure an internal user, for the sponsor portal.
I Have configured it almost the same way so i don't understand why the ISE is reporting :
Sponsor authentication has failed : Sponsorgroup not found for user
My identity store is a sequence for AD and internal users, and i can see from the log that it looks in the right place :
Identity Store:
Internal Users
My condition is that the internal user, should be a member of identity group : sponsorAllAccount
my identity group :
Identity Group:
SponsorAllAccount
and then get a created sponsor group, this sponsor grop that is allocated to the condition, works fine for det AD-users.
Evaluating Identity Policy
5435 Sponsor authentication has failed
any suggestions of why ? I'm now running the lastes 1.1.1 version.
Br
TuvaHi Tarik
thanks for the answer.
I'm certain that the user does not exist in the AD domain, anyhow, then my log would tell me that the authentication failed because of wrong password !?
I can se from the log that the ISE is doing lookup in the internal database.
this is output from he logging :
Identity Store:
Internal Users
I have ,made a identity store sequence with both AD and internal users.
Br
Tuva -
How to authenticate external and internal users on different AD
What is the recommended way to authenticate external users as well as internal employees in a customer facing application?
We have external users in an Active Directory in the DMZ and our employees in our internal DMZ. Unfortunately we don't have an identity management system in place and wondering if there is a way we could authenticate user against two active directories without creating a trust between them.
We are implementing EP7.0
Thanks in Advance.You can also use user partitioning. A feature of the UME which allows for having different user persistence options for different users. What you could do in this case have the external user stored in the local db or an LDAP for the external users and the internal users stored in an internal LDAP directory. For more details about <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/e0/b60b404b2b1e07e10000000a1550b0/frameset.htm">user partitioning</a>, please see the docs.
regards,
Patrick -
LaCie and Internal Drives Fail with iTunes 7.7
Ok here's the situation:
Problem #1 -- All of my burn drives have committed massive, bloody, catastrophic suicide. My internal "died" literally days after the warranty expired (I did not get AppleCare). It's still there and it recognizes when I put CDs and DVDs into it; I can hear it spin at start up and it spins when something is in there. It simply won't PLAY or BURN anything, I don't know why. I get all sorts of interesting "fail" messages, including the laser can't be calibrated and the device was removed. Usually it initalizes and then seconds later says burn completed, ejecting the disc which hasn't been written. Apple offered to fix it by installing a new one for $500+; I declined and instead purchased a LaCie external drive...
Problem #2 -- which used to work just fine. It was a little tempermental but with minor tweaking I was able to burn in iTunes, Roxio Toast (which now has decided to start crashing every time I do a drag-and-drop), Finder, etc. Now the LaCie doesn't want to work either. Sometimes the drive will mount, sometimes it won't. Even when it does mount, it isn't working properly. Sometimes I'll get the same device removed message as I do with the internal, other times it just squeaks at me. No, nothing has been dropped, banged, drowned, etc. I've run EVERYTHING on both drives -- Disk Utility, permissions corrections (even though there were no problems with any iTunes files), turning off CD text, dealing with the weird language bug in the International System Preferences, Burn Patch, setting burn speed to 4x instead of best possible, battery out for 15 minutes and restart, compressed air, etc... nada. Which leads to...
Problem #3 -- the next problem. If I can't burn CDs, I won't die. It's an annoying, inconvenient and expensive problem, but I'll survive. I can just use my old iPod... oh, right, that just died, too. Unfortunately, along with the lovely MacBook and LaCie, I've also purchased iLife '08, Mac OS X 10.5.1, and a 200 GB Time Capsule. Of course, all of these require a functioning CD drive to install, and without one I have a lot of useless and rather expensive crap. On to...
Problem #4 -- the final issue. I have 2 512 MB memory cards in the laptop. According to my System Profiler, I have 1.69 GB left on my hard drive and the computer keeps yelling at me that I don't have enough space left on my start up. I know this. I also know that I want to keep my files, which is why I bought the Time Capsule in the first place. I haven't done ANY backups and really need it in place, both so I can free up space on the hard drive and also so I don't lose everything with the inevitable epic fail. Again, I can't install the Time Capsule without a working CD drive, so this brings us full circle to problem #1.
Any help or suggestions would be GREATLY appreciated.
Specs:
MacBook
OS X 10.4.11
LaCie d2 DL DVD+-RW with LightScribe
Matshita CD-RW CW-8221
iTunes 7.7.1 (11)
<Edited by Moderator>95% of this is really primarily a hardware issue, possibly an OS issue, and 5% an iTunes issue. I would suggest posting this on a MacBook hardware forum where you'll get specific assistance for MacBooks.
I have 1.69 GB
On the external drive issue (I assume this is really a DVD drive though you keep on saying "CD") it could be a chicken and the egg question. A lot of the problems could be due to the crowded drive. I keep at least 18GB free on my computer all the time for OSX wiggle room.
Perhaps your next line of investigation should be to purchase a drive for backup purposes, and a separate drive for archiving files. -
Internal and external user logins
i have an asp.net web application which should work as intranet application if windows user logs in and it should ask separate logins if an external user logs in. Is it possible? it can be accessed over internet and internal users uses VPN or the network
where site residesThis forum is for questions about the TechNet Wiki. It might be best to ask your question in the asp.net forums, linked here:
http://forums.asp.net
Richard Mueller - MVP Directory Services -
E-recruiting: create internal user failture when using RCF_CREATE_USER
Hi, experts
When I create candidate and internal user in E-recuriting using report RCF_CREATE_USER, the system returns me a message: "I::000 Enter at least one number for the business partner" , and so i can't create the user successfully.
Can anyone show me the solution?
Thanks very much.
Best Regards,
qiuguoHi
just a thought.....it may not be creating a CP /BP....check your authorization.....hope this helps.....b/r -
Hi,
1) Internal User expected exception:
Exception: Payments,apply credits,disputes and print are not supported when multiple customer/currency transactions are selected
2) External User is throwing below error instead of throwing above exception.
Error
You are trying to access a page that is no longer active.
The referring page may have come from a previous session. Please select Home
to proceed.
found this MACCHECK from fnd logs of external user payment.
MACCHECK: . Parameter failing validation is :mode. The parameter mode with value MultiPay could not be recognized as part of Server's response on the previous request. Incoming URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/EndecaDummyPG . Current URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/OIREndecaCustHomePG&akRegionApplicationId=222&_ti=1125493452&oapc=10&retainAM=Y&addBreadCrumb=N&oas=6-LL4ndIUFLX-2zjQAQD6A.. . Referer URL is : https://<hostname>:4443/endeca/web/ar/customer?doAsUserLanguageId=en_US&languageId=en_US . HTTP Request Method is : POST
can someone please help.
Thanks,
RRSWell, I compared my classpath between my windows batch file and the
makefile (that comes with the samples installation) on Solaris and realized
that I am using different sets of jars.
So, I removed the extra jars from the makefile to narrow down the
problem. If I remove the /opt/SUNWam/lib/servlet.jar from the makefile,
I can reproduce this problem on the Solaris box as well.
When I include this servlet.jar on my windows machine the program works!
Only jars I have in my classpath are amclientsdk.jar and servlet.jar which
I have copied from my installation (/opt/SUNWam/lib) on the Solaris box.
Just the same way, by copying the am_services.jar, saaj-api.jar, and jaxm-api.jar,
from the Solarix box to the windows machine,
I am also able to pull the assertions from the Access Manager.
I installed Sun Java Enterprise System 2005Q1 on a Solaris 10 machine.
During the installation, I configured to install the Access Manager
in Sun Application Server.
Why do I need to have different set of jars on the windows machine
for the Access Manager client SDK ?
Could you please point me to a download link where I could download
the correct Windows Access Manager Client SDK for
Sun Java System Access Manager 6.0 (Sun JES 2005Q1)?
Thanks. -
H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information. -
Oracle Grid11g On Linux el5 Connection to host as user failed
Hi,
I have oracle grid 11g control running on Linux.
I have configured it to monitor a target (oracle 10g database) on solaris 10, but I'm unable to schedule backups.
I get error *" Connection to host as user failed "*.
I am providing the oracle user account details for the solaris .
I tried logging in to normal Enterprise Manager for the oracle 10g database and the host credentials was validated.
Can anyone advice why the same host credentials failed on grid?
Please help.If youre adding the host in preferred credentials, have you
1. Configure the database first via > targets > database > configure
2. Are you using a proxy?
3. Did you try with the domain name prefixed on the OS user?
4. Whats in the emoms trace? If nothing much, switch to debug mode and try again and you may catch something else.
5. worst comes to worse,throw in a windump or tcpdump trace while you run the connect to see if theres anything at an OS level youre missing, OS errors back to the GC will just manifest themselves as "could not connect to host as user..." the dump will show you what they are but this is last case. -
ACS v5.1 - Can internal users be disabled after x failed attempts?
I have noticed under authentication settings for internal user accounts there is no setting to disable the account after x number of failed attempts (ACS v5.1). This is such a fundamental requirement for user accounts that I am wondering whether I have missed something. (They include this option on Administration accounts)
Does anyone know if can this be set somewhere else or is Cisco going to implement it in a later version?
Many ThanksHello jrabinow ,
Thanks a lot for the reply .
We already have our AD setup to lock account of users who failed 3 consecutive windows login attempts .
However when network administrators fail to login after 3 consecutive attempts into a network device, they can still login into a network device if they provide their correct AD credentials .
Is there any specific configuration that needs to be done on the AD to be aware of the failed login attempts on the network devices and count it the same as a failed windows login attempt ?!
Kind Regards ,
Moussa -
Connect as: normal with Oracle 12c and Toad 12 FAILS.
Connect as: normal with Oracle 12c and Toad 12 FAILS.
I've been looked at forums, blogs and wikies but I couldn't found why my new user, that I created before, can't connect as NORMAL but as SYSDBA it can.
I don't know why this occurs.
My intention is create a user/schema in a local DB to have my own db.
I can create a new user but when I go to connect to this new schema I only connect as SYSDBA, this is a big trouble because I can "see" object's DBA and I don't want this, I want create my own new schema db and not share name's object or name's tables with DBA.
For example, object JOB exists as SYSDBA and I can't create a new table with this name.
Please, help me.
Thanks very much for read me.Hello rp0428!!
I'll show you all step that you wrote.
In sql plus:
sho con_name
CON_NAME
CDB$ROOT
SELECT name, created, open_mode FROM v$database;
NAME CREATED OPEN_MODE
ORCL 23/07/2013 15:59:44 READ WRITE
SELECT username, account_status, lock_date, expiry_date FROM dba_users WHERE USERNAME like '%IMEI%' ORDER BY 1;
username account_status lock_date expiry_date
IMEILOCAL OPEN 22/01/2014 12:20:25
SELECT USERNAME,CON_ID,USER_ID FROM CDB_USERS WHERE USERNAME like '%IMEI%';
USERNAME CON_ID USER_ID
IMEILOCAL 3 117
select GRANTEE,con_id from cdb_ROLE_PRIVS where GRANTED_ROLE='CONNECT' AND GRANTEE LIKE '%IMEI%';
GRANTEE con_id
IMEILOCAL 3
SELECT NAME, CON_ID, DBID, CON_UID, GUID FROM V$CONTAINERS ORDER BY CON_ID;
NAME CON_ID DBID CON_UID GUID
ORCLC 3 2835062256 2835062256 14236144864B451C8E04D5C6453034FA
To create my user I did:
select con_id,dbid,NAME,OPEN_MODE from v$pdbs;
2 4064112103 PDB$SEED READ ONLY
3 2835062256 ORCLC MOUNTED
alter PLUGGABLE database ORCLC open;
select con_id,dbid,NAME,OPEN_MODE from v$pdbs;
--2 4064112103 PDB$SEED READ ONLY
--3 2835062256 ORCLC READ WRITE
alter session set container=ORCLC;
CREATE TABLESPACE DATA3 DATAFILE 'C:\app\X05699SA\oradata\orcl\DATA3.dbf' SIZE 50M;
CREATE USER IMEILOCAL IDENTIFIED BY IMEILOCAL DEFAULT TABLESPACE DATA3 TEMPORARY TABLESPACE TEMP PROFILE DEFAULT ACCOUNT UNLOCK;
select username, password, created, password_versions, default_tablespace from dba_users where username like '%IMEI%';
username password created password_versions default_tablespace
IMEILOCAL 24/07/2013 16:41:35 11G DATA3
GRANT CREATE SESSION TO IMEILOCAL;
GRANT CREATE TABLE TO IMEILOCAL;
GRANT CREATE VIEW TO IMEILOCAL;
GRANT CREATE procedure TO IMEILOCAL;
GRANT CREATE trigger TO IMEILOCAL;
GRANT CONNECT TO IMEILOCAL;
GRANT CREATE SEQUENCE to IMEILOCAL;
GRANT create any context TO IMEILOCAL;
GRANT create public synonym TO IMEILOCAL;
GRANT execute on dbms_rls TO IMEILOCAL;
GRANT administer database trigger TO IMEILOCAL;
SELECT user, osuser, terminal, program FROM gv$session WHERE sid = (SELECT sid FROM v$mystat WHERE rownum = 1);
user osuser terminal program
SYS SECTORIALES\X05699SA MX3500906DC1549 Toad.exe
SELECT u.username, u.default_tablespace, u.temporary_tablespace "TMP TBS", u.profile, r.granted_role,
r.admin_option, r.default_role
FROM sys.dba_users u, sys.dba_role_privs r
WHERE u.username = r.grantee and u.username like '%IMEI%'
GROUP BY u.username, u.default_tablespace, u.temporary_tablespace, u.profile, r.granted_role,
r.admin_option, r.default_role;
IMEILOCAL USERS TEMP DEFAULT CONNECT NO YES
SELECT tablespace_name FROM dba_tablespaces;
SYSTEM
SYSAUX
TEMP
USERS
EXAMPLE
DATA3
SELECT name, password FROM user$ where name like '%IMEI%';
IMEILOCAL passwordx
select USERNAME, USER_ID, CREATED, COMMON, ORACLE_MAINTAINED from all_users WHERE username like '%IMEI%' order by 1;
IMEILOCAL 117 24/07/2013 16:41:35 NO N
select * from user$ where name like '%IME%';
117 IMEILOCAL 1 passwordx 3 2 24/07/2013 16:41:35 26/07/2013 12:20:25 0 1 0 0 DEFAULT_CONSUMER_GROUP 0 S:566C0A818AC42C203D49706D3586926A7656F5B16AA6C37E8FE10A1F779B;H:6FB057BA9F5B0690B93FD9A20695654D
Here you're my tnsnames.ora
# tnsnames.ora Network Configuration File: C:\app\X05699SA\product\12.1.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.iecisa.corp)
# Here you're my listener.ora Network Configuration File: C:\app\X05699SA\product\12.1.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\X05699SA\product\12.1.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\X05699SA\product\12.1.0\dbhome_1\bin\oraclr12.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
I think my problem source from about CDBs and PDBs, that is new in Oracle 12c and I'm not configure correcly my new DB and neither my new User
Thanks for all!!! -
Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.
Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise. -
BSP - UserId and Password for Internal Users - Anonymous for other users
Hello,
We developed an application via BSP's. This application can be accessed by two kind of users.
1. External Users, with should access the page without using a userId and password.
2. Internal Users, they will have more authorisation and need to specify their userId and Password.
How can we accomplish this? I tried internal aliases, but can't get it to work properly.
In the first service 'zbsp' I didn't specify a userId and password in sicf.
Then I created an internal alias 'zbsp' referring to this 'zbsp'. In this alias I specified a userId and Password, but the system still asks for a userId and Password. (and after logging in the system gives the following error: The application name in URL .../bc/bsp/sap/zbsp2/uat_report.htm is invalid.)
What did I do wrong? Or are there other ways to accomplish this?
Greetings,
BartTake a look at the following mesaages that discussed the whole SSO and SSO2 ticket logins.
As for a way to handle the two different login types. Well first and formost - active the SSO Tickets on your system. Set your BSP up for that.
Then create a new starting page with an alias to the pöublic section for BSP's in your system. On this page make two links.
For your external users - one that redirects to your BSP passing the user and password in the url for the "read only external user" - that's the sap-user=name here&sap-password=passwordhere.
For your internal people give them simply the link to the BSP which when they click it will see no user name and password and redirect them to the BSP login.
Make sure you setup the BSP login according to SAP note 517860 and follow the instructions from http://help.sap.com/saphelp_nw04/helpdata/en/1d/13c73cee4fb55be10000000a114084/frameset.htm using the supplied SYSTEM_PUBLIC)
It's a bit basic but it works, we do it
Oh and setting up the system for the SSO (transaction sso2) is very very simple!! -
Hello,
I'm seeing an issue that started this past Monday with no recent change to our environment.
External Outlook Anywhere users and Mobile users, OWA users are unaffected.
Internal Users are affected when using Outlook of any version, 2010 or 2013.
-Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
1 . Using Cached Mode:
a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
on the workstations.
b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
The outlook icon in the system tray says "Outlook is requesting data from the server":
2. Using Non-cached mode
a. No Login Prompt at startup, business as usual
b. Free/Busy, Out of Office works fine. Autodiscover is fine.
c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random.
3. Lync Pop up for credentials often, though entering the password.
URLs are correct. Autodiscover, EWS, etc.
Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node.
Not sure what is going on.
JoshYou have a hybrid configuration with Office 365, right? You didn't provide this valuable piece of information.
In Exchange Online PowerShell run this command:
Get-OrganizationConfig | FL PublicFoldersEnabled
If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders. Be sure that you have legacy pubic folder interoperability properly configured.
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.Hi I'd like to jump in here. Your app showed me this:
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
Destinations:
Plastic Wrapper [Local] (Last used)
Total size: 999.86 GB
Total number of backups: 64
Oldest backup: 2013-07-24 23:25:11 +0000
Last backup: 2013-11-17 01:40:47 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 453.81 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy
Maybe you are looking for
-
Very Urgent : 'BAPI for CK74n in ECC 6.0 for crating the cost estimates'
Hi guys, i am working in the upgradation project from 4.5b to ecc 6.0 in 4.5b we have the tcode ck71 for cost estimates the respective tcode in ecc 6.0 is CK74N I want BAPI for tcode CK74N to upload the data can you please help me to find out the res
-
How to Find out Users with Hardware Phones
Hi, Is there anyway that i can create a report that which Users are using IP Phones (Physical) and which users are using soft Phone (Lync Client on PC). Regards Usman Ghani Usman Ghani - MCITP Exchange 2010
-
Restrict the views in material master
Dear Experts, In Material master(MM01), how to restrict the views like Basic data2, General plant data storage2, accounting2 views in which we are not entering any data. How to restrict these views while MM01 creation,only useful views shall come. Th
-
Hi. I have recently started using Premiere Pro CC after being a previous CS user. After spending some time working on my first project in CC (and saving at regular intervals) I closed the project and went back into it the following day. When I did
-
I can't update to ios 7.1.1 !!
hello my proplem. why the iphone shows me this message every time when i check for update ?? "your software is up to date" what do i do ?