Oracle Provider for Membership and Roles not running

Hi Everyone,
I ran the ASP.Net Configuration and select the 'Provider' tab.
When I choose 'Select a single provider for all site management data', only AspNetSqlProvider is shown.
When I choose 'Select a different provider for each feature (advanced)', I see the Oracle Provider for Membership and Roles. I select both then try to enter 'Security' tab. It will hang then come back with this error:
"There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. "
Any solutions to this...........
Regards
Sid

Thanks for the reply but i stil have the problem...............
My Current machine.config has this to say in that particular section
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/>
<add name="OraAspNetConString" providerName="Oracle.DataAccess.Client" connectionString=" "/>
</connectionStrings>
What can be done.........................in this case
Thanks

Similar Messages

  • Oracle APIs For Contacts and Role Responsibility

    Hello,
    Please, I need a direction on how to proceed about the use of the right API. I'm working with Oracle EBS R12. If this is not the place for this kind of doubt, please let me know the best one.
    I already have a site for a customer, which was created by the ra_customers_interface_all, after loading the data and processing the interface.
    Now I need to create (using Oracle APIs) a contact name, which will have at least a telephone number and an e-mail address.
    I know that the contact name will be in table HZ_PARTIES, but later it will be related to a site. The registry that will be used for this has the Party_Type value equals to 'PARTY_RELATIONSHIP', according to what the customers interface did after being executed.
    Then the telephone number and e-mail address will be in table HZ_CONTACT_POINTS. The Owner_Table_Name of it has to be 'HZ_PARTIES'. The Owner_Table_Id of it will have the value of Party_Id from table HZ_PARTIES, which has Party_Type value equals to 'PARTY_RELATIONSHIP'.
    After this, my main goal is to create a role responsibility to the contact name. So I know there are other two tables involved. They are HZ_CUST_ACCOUNT_ROLES and HZ_ROLE_RESPONSIBILITY.
    And I see there are two more tables involved, which are HZ_RELATIONSHIPS, which will do the PERSON x ORGANIZATION relation, and also table HZ_ORG_CONTACTS, which has the field PARTY_SITE_ID, to finally indicate that this contact is part of a site, which I already have.
    I have all these tables in mind. I just need a tip on how to proceed. I'm able to create a party as PERSON, not yet as PARTY_RELATIONSHIP. I'm able to create a contact point (telephone number). I'm lacking the idea about what to do have this:
    site -> contact name -> telephone number of this contact name inside this site
    I can do this:
    site -> telephone number of this site
    Any help would be great.

    Thanks for the reply but i stil have the problem...............
    My Current machine.config has this to say in that particular section
    <connectionStrings>
    <add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/>
    <add name="OraAspNetConString" providerName="Oracle.DataAccess.Client" connectionString=" "/>
    </connectionStrings>
    What can be done.........................in this case
    Thanks

  • Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

    I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
    Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
    Has anyone come across this error before?

    There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
    "Cannot get Membership Provider with name CustomRoleProvider.
    ", indicating that you may have used role provider name in Membership provider text box or in web.config.
    Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
    Please refer  -
    Forms Based Authentication (FBA) in SharePoint 2013
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Provider for membership provider in Business Application Silverlight

    Hello.
    I'm using:
    -VS 2010 Ultimate
    -ODAC 1120230Beta (for EntityFramework)
    -DB Oracle 10.2
    How to use Oracle provider for membership provider (or Role Manager provider) in Business Application Silverlight (WCF RIA)?
    Has read article.
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/dotnet/usingoracleprovidersaspnet2/UsingOracleProvidersforASPNet.htm#t2a
    Did step by step. But it is impossible a step 7. There is no choice of position OracleMembershipProvider and OracleRoleProvider.

    Guessing here but check either mail.jar or smtp.jar are in your classpath.....mailapi.jar is NOT sufficient.
    See http://forum.java.sun.com/thread.jsp?forum=43&thread=279454 for details
    SH

  • Large Value problem with Oracle Provider for 9.2.0.7.0 and 10.1.0.4.0

    Hi,
    There is table having single column "SCORE" as shown below.
    | SCORE |
    |9.0000E+33 |
    |8.0000E+33 |
    |7.0000E+33 |
    |6.0000E+33 |
    I am trying to fetch column SCORE from above table in database. The type of column SCORE is NUMBER. With Oracle Provider for OLE DB 9.0.1.0.1 everything works fine.
    But when I use 9.2.0.7.0 or 10.1.0.4.0 , Recordset::rawGetRows() returns -2147217845. Is there is any limit on value retrived using Recordset::rawGetRows() in newer versions of Oracle Provider for OLE DB?
    Please help.
    Thanks and Regards,
    AC
    Edited by: user8090166 on Feb 24, 2009 4:13 AM
    Edited by: user8090166 on Feb 24, 2009 4:17 AM

    Hi,
    Yes, i've take it off but i still have the same error...
    Anyway, like the, the people from hardware, were able to recover the 32Bit Oracle9.2 system, what do you think of use the old system to make the export, and then import into the new one 64Bit and Oracle10.2 ?
    Homogeneous system copy by r3load method?
    Is it possible right!?
    More easy and a cleaner installation?
    RM

  • "Oracle Provider for OLE DB" not in "Data Link Properties"

    Hello,
    we install the "Oracle Provider for OLE DB" in the Oracle Database. But
    we miss the entry in the "Data Link Properties".
    The entry was needfull for the Identity Center configuration wizzard.
    I found no hint how to add manual a entry to the "Data Link Properties".
    Have anyone a idea?
    Mfg
    Rainer Kunz

    Hi Matt,
    if you speak about CLASSPATH you mean the environment-parameter PATH?
    If yes,
    D:\oracle\MIM\102\BIN>set PATH
    Path=D:\oracle\MIM\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wb
    em;C:\j2sdk1.4.2_17-x64\bin;C:\j2sdk1.4.2_17-x64;C:\j2sdk1.4.2_17-x64\jre;C:\j2s
    dk1.4.2_17-x64\lib;D:\usr\sap\MIM\SYS\exe\uc\NTAMD64
    In D:\oracle\MIM\102\BIN i see the follow files:
    06.01.2009  23:27           539.648 OraOLEDB10.dll
    06.01.2009  23:27             1.712 OraOLEDB10.tlb
    06.01.2009  23:27            24.576 OraOLEDB10d.dll
    06.01.2009  23:27             7.168 OraOLEDB10us.dll
    06.01.2009  23:27           146.944 OraOLEDBgmr10.dll
    06.01.2009  23:27            12.800 OraOLEDBpus10.dll
    06.01.2009  23:27             9.216 OraOLEDBrfc10.dll
    06.01.2009  23:27             7.168 OraOLEDBrmc10.dll
    06.01.2009  23:27           187.904 OraOLEDBrst10.dll
    06.01.2009  23:27            17.408 OraOLEDButl10.dll
    Mfg
    Rainer

  • ORacle provider for OLEDB

    Hi,
    I've downloaded and installed Oracle client. I can connect to the database using SQLPLUS. Tnsnames.ora file is in place.
    My question is how do I activate Oracle Provider of OLEDB?
    I tried to create a udl file can be used to test the connection (referred in the link provided below). To create a udl file on the desktop choose to create a new text document and name it with the .udl extension. But on the Provider page I can't see the option for "Oracle Provider for OLEDB" .
    https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(viewingMode=1143&from=BOOKMARK&bmDocTitle=When%20Logging%20into%20FDM%20Receive%20%22Error:%20%20ORA-12154:%20TNS:%20could%20not%20resolve%20service%20name%22&bmDocType=PROBLEM&bmDocDsrc=DOCUMENT&bmDocID=597375.1))
    I can see that OLEDB folder exists under <ORACLE_CLIENT_HOME>\oledb
    Any pointers will be appreciated.
    Thanks in advance.

    Gaurav,
    Well the installer is not running on MS windows 2008. It just terminates abnormally with some UNknown error.Then please read below thread carefully, try to follow around it. If still problem then I think post the question on dedicated forum [url https://forums.oracle.com/forums/forum.jspa?forumID=148&start=0]Oracle Provider for OLE DB
    Re: No luck installing Oracle OLEDB 9.2 on WinXP
    Regards
    Girish Sharma
    Edited by: Girish Sharma on Jul 9, 2012 10:51 AM
    Or continue in this thread, if moderator move this thread to that forum after few minutes.

  • Oracle Provider for OLE DB Error

    Hello all.
    Can anyone help me understanding why using a statement like
    select * from openquery( linkservername, 'select * from table' )
    fails with
    Server: Msg 7399, Level 16, State 1, Line 1
    OLE DB provider 'OraOLEDB.Oracle' reported an error.
    [OLE/DB provider returned message: ]
    OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IRowset::GetData returned 0x80004005:   ].
    On the sql server side, when using the Oracle Provider for OLE DB, but success when I change the linked server to use Microsoft Oracle Provider for OLE DB? It makes no sense to me. Sometimes, when I add a rownum <= 100 it does work with the Oracle OLE DB Provider. As you can see, I installed Oracle Client 10g on the sql server running version 2000, and created a linked server to an Oracle server running Oracle 10.2.4.0. The queries work fine with the Microsoft driver, but fail with the above message when using the oracle native driver.
    For your information, here's the select @@version from the sql server database.
    Microsoft SQL Server 2000 - 8.00.760 (Intel X86) Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
    Just wanted to know what might the problem as using the Microsoft driver the session doesn't seem to use FCF.
    Any other information you may need, just let me know.
    Thanks!

    Hi,
    I'm not familiar with that particular error, but if you're not already using 10204 oledb/client, I'd certainly do that as a first step. There were lots of issues fixed in our oledb provider since 10201.
    Hope it helps,
    Greg

  • Oracle Provider for OLE DB 10.1.0.2.0

    Hi,
    I installed 10g client on my local PC to get access to an ASP application using 10g database. The select always returns no row for a username, therefore, I could not login to the application. But the sqlStatement in SQL*Plus did return a row. More strangely, one script also uses Oracle Provider for OLE DB 10.1.0.2.0 works without any problem.
    In Oracle Provider for OLE DB 10.1.0.2.0 documentation, it has the following as system requirements:
    System Requirements
    The following items are required on a system to use Oracle Provider for OLE DB:
    1.Windows NT, Windows XP, Windows 2000, or Windows Server 2003
    2.Access to an Oracle database (Oracle8i or later)
    3. Oracle Net Services
    4. Redistributable files provided with Microsoft Data Access Components (MDAC) 2.1 or higher are required by the provider. These files are available at the Microsoft Web site:
    http://www.microsoft.com/data/
    5. Oracle Services for Microsoft Transaction Server release 10.1 or higher. This is required for consumers using Microsoft Transaction Server (MTS) or COM+.
    I think that I might need to download the Microsoft Data Access Components (MDAC). I went to Microsoft web site, and the latest version for MDAC is 2.8. Anybody has any experience with this? Am I on the right track? I don't want to mess up with my machine by installing MDAC 2.8 if it does not solve the problem.
    Thanks, and your early reply is greatly appreciated.
    Jane

    Well, if some of the required componets were missing, I would imagine you getting an error when trying to connect?
    Where is this ASP application actually running?
    Is it running on your localhost IIS web server?
    If not, any setup on your computer will be irrelevent.
    If it is, you need to install MDAC components, and 2.8 is the latest.
    If running on your local IIS, did you try to create a very basic ASP page which just creates a connection to the database in question? Does that work?
    Do you have ON ERROR statements in your code to bypass any/all SQL errors?
    If you create a simple UDL file on your desktop and specify the server/user/password (ater selecting Oracle OLEDB driver), does the connect button work?

  • Using Dynamic Groups in Ldap for Accounts and Roles

    Does anyone currently use dynamic groups in LDAP for accounts and roles? I have set up a dynamic group in ldap (we are using OID Oracle internet Directory 10.1.2.0) , ldapsearch returns the correct list of unique names, but the account does not appear on my profile page when I log in to UCM (10.1.3). I cannot find any documentation so I'm asking myself if it is supported .....

    Thanks tim ... will check, but Oracle are saying :
    Oracle Universal Content Management - Version: 7.5.1
    Information in this document applies to any platform.
    Product: Content Server
    Version: 6.0
    Goal
    Can the Content Server's LDAP provider support, or can it be configured to support, dynamic LDAP groups?
    Solution
    The Content Server by itself is unable to process dynamic LDAP groups since the filter that is used cannot read dynamic groups. However, dynamic groups can still work in the Content Server if the permissions for the queried user are generated on the LDAP server side. For example: Novell and Active Directory both have this functionality.
    to which I have replied you suport 3rd party ldaps, but not your own? Shurely shome mishtake ..... if ldap search works in a seamless way, surely provider should too ....
    Billy, you may well be right, just got a cashflow problem over here !

  • Unable to install Oracle Provider for OLE DB 8.1.6

    I could not install Oracle Provider for OLE DB 8.1.6. The problem was when I double click on the Setup.exe to run setup, it would not execute on some computers (brand new computers) and worked fine on others. I often got an error message saying that the Java Run-time Environment was not found. Has anyone run into that problem. I greatly appreciate if you could help.

    Found the post below on another thread. This would not work for us without changing the JRE_MEMORY_OPTIONS as well.
    ========================================================
    One of our DBAs had the answer. Its a bug relating to p4 processors.
    1. Rename the file symcjit.dll to symcjit.old
    2. Change the following line in the "oraparam.ini" file to read:
    JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m
    They said someone found it in Oracle KB article 131299.1 but I have still been unable to find the Oracle KB. Perhaps a "Knowledge Base" link should be added to the support or resources section.

  • Unable to install Oracle Provider for OLEDB 8.1.6

    I was trying to install Oracle Provider for OLEDB 8.1.6 but was not able to do so because the java run-time environment could not be found. I have tried to install it on different computers, it worked on some and not on others. The computers I have tried all had windows 2000 or NT 4.0. I greatly appreciate if you could help.

    Found the post below on another thread. This would not work for us without changing the JRE_MEMORY_OPTIONS as well.
    ========================================================
    One of our DBAs had the answer. Its a bug relating to p4 processors.
    1. Rename the file symcjit.dll to symcjit.old
    2. Change the following line in the "oraparam.ini" file to read:
    JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m
    They said someone found it in Oracle KB article 131299.1 but I have still been unable to find the Oracle KB. Perhaps a "Knowledge Base" link should be added to the support or resources section.

  • Oracle Provider for OLEDB for 9.0.1 on WinNT

    Is the Oracle Provider for OLEDB in 9.0.1 missing ? I did not
    find it in the client nor in the server.
    I am using the OTN Download for installation.
    Thanks in Advance
    --Shirish                                                                                                                                                                                                                                                                                                                                                                                       

    You can double-check on the OLE DB forum, but I'm pretty confident the answer is no. You need to install the client so that the OLE DB provider will have the OCI and SQL*Net libraries necessary to actually communicate with the database.
    Justin

  • Crystal Reports can't add stored procedure using Oracle Provider for OLE DB

    Hello,
    I am trying to bind an oracle stored procedure to a crystal report through Visual Studio 2008.
    This oracle stored procedure returns a ref cursor.
    I am using an oracle 11g database (11.2.0.2.0) .
    When I use the Oracle Provider For OLE DB driver to bind the store procedure with the report, I get the following error message:
    Description : ORA -06550 Line 1 Column 7
    PLS 00306 wrong number of types or arguments to the "Strored Procedure Name"
    But When I use the Microsoft OLE DB provider for oracle driver, I can bind the stored procedure to the report successfully .
    I cannot use the Microsoft OLE DB provider for oracle driver because it does not support the CLOB data type which I plan on having the stored procedure return once I can get everything working.
    I have tried setting PLSQLRSET = 1 IN "HKEY_LOCAL_MACHINE\SOFTWARE\KEY_OraDb11g_home1\OLEDB", but that does not seem to work either
    Any assistance would be greatly Appreciated
    My Stored procedure is very simple as the moment (I just need to get it working then I'll add more stuff). Here's what it looks like:
    CREATE OR REPLACE PACKAGE PROMO.PKG_REPORT as
    TYPE OUT_Type IS REF CURSOR;
    procedure Report_ThisReport (
    p_ThisIdField IN number,
    IO_CURSOR IN OUT OUT_Type
    end PKG_REPORT;
    CREATE OR REPLACE PACKAGE BODY PROMO.PKG_REPORT as
    procedure REPORT_ThisReport (
    p_ThisIdField IN number,
    IO_CURSOR IN OUT OUT_Type
    IS
    BEGIN
    OPEN IO_CURSOR FOR
    SELECT ThisField
    FROM ThisTable
    WHERE ThisIdField = p_ThisIdField ;
    END REPORT_ThisReport;
    end PKG_REPORT;
    Edited by: 894988 on Nov 3, 2011 2:45 PM
    Edited by: 894988 on Nov 3, 2011 2:46 PM
    Edited by: 894988 on Nov 3, 2011 2:47 PM

    It seems that some questions posted here on the XE forum are really questions about other Oracle technologies.
    Concretely, for you there is an Oracle Provider for OLE DB Forum that is active and a terrific resource for you to use.
    Oracle Provider for OLE DB
    Cheers!

  • Installing a VB application using Oracle Provider for OLEDB

    Hi all,
    I have a corporate VB application that uses the Oracle 9i client.
    The Oracle Client is on a network disk, so all my clients will not need to install on their client machines.
    I am using Wise for Windows Installer to install the application on each client machine.
    I need to include on the installation package the "Oracle Provider for OLEDB" files.
    How can I do this?
    Thank you all,
    Ardates Cruz.

    The standard way to use the unmanaged Oracle.DataAccess is to install an Oracle client on any machine that wants to use the application.
    It is possible to avoid that installation by including a bunch of DLLs and some other files in the application, but it's far more cumbersome than using the managed client. Here's a link to get you started on that: http://stackoverflow.com/questions/13721025/deploying-and-configuring-odp-net-to-work-without-installation-with-entity-frame

Maybe you are looking for