Oracle Repors 3.2(using the Dynamic query)

How can I create a report with dynamic queries?
For example, I have a form with several check_boxes which represent the field_names.My user selecting the fields by checking the check_boxes in the form. After finishing the user's selection, i want to generate a query based on the fields chosen by the user and a report needs to be generated based on the dynamic query.
Can anyone has any idea on this requirement? Quick response is appreciated. Thanks.

hello,
this sounds like the perfect oportunity for using the runtime customization feature of oracle reports 6i.
using that you can either custimize an existing report using an XML file or -which fits more your requirement- encode a report-definition in XML and run the XML file.
you could dynamically create that file according to the users selection and then run this file.
you find more about runtime customization in the documentation of reports 6i.
regards,
the oracle reports team

Similar Messages

Error in the Dynamic query in AME

Hi Experts,
I am using the below query but i am facing the error "Ensure the query selects exactly 1 column" in AME Approval group under Dynamic query.
But the query returns only one column when i ran in toad.
select 'person_id:'||a.person_id from
(SELECT to_number(EXTRACT(column_value,'/e/text()')) person_id
from (select (XXSYK_GET_PERSON_ID(:transactionId)) col1 from dual) x,
TABLE(XMLSEQUENCE(EXTRACT(XMLTYPE('<ROW><e>'||REPLACE(col1,',','</e><e>')||'</e></ROW>'),'//e')))
)A
Thanks,
Sadeesh

Thanks !!!!

I want to use the SQL query IF EXIST to update or insert data in a ms access table, but it doesn´t work

Hi,
I want to use the SQL query IF EXIST to update or insert data in a ms access table, but it doesn´t work
(fault number -2147217900)
I want to search for a value in a ms access table , if it exist i want to update it, if not i want to insert a new row.
Working with LabView 7.1, database con. toolset.
Who can HELP?
Thanks a lot
Marco

Hello,
I think that If exist is not a standar SQL command (I know it exists I think in Oracle and SQL server), MS access doesn't support it, so I think the best way to do it is first make a Select and then either an Update or an insert, sorry...
Paulo

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

How to use the Dynamic Expression in BRFplus

Hi Experts
               I am new to BRFplus. Can you give any document on BRFplus how to use the Dynamic Expression.
Thankyou
Venkat

OK I tried it and worked but for one condition:
WHERE DECODE (E.qualification_sid, 1104,
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
But how to put two conditions for the same Expression:
WHERE DECODE ((E.qualification_sid, 1104) AND (E.RANK_SID, 8),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
The previous code gives me this error: missing right parenthesis

How to use the Dynamic Configuration Bean

Hi experts,
im currently doing a file to mail scenario.
i want the name of the input file as the subject of the mail.
i want to establish this using the Dynamic Configuration bean
my first question is:
key.1 read http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
this reads the value of the message ID into the attribute THeaderSUBJECT
but what does this do?
key.1 write http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
when i use this it has no effect atall.
my second question.
I have my input filename in the FileName attribute in Dynamic configuration how can i read it into THeaderSUBJECT attribute.
Appreciate any suggestions.

Hi Satish,
Yep i know its possible via an udf in Message mapping but i dont have an MM in my scenario. Since im not parsing thru the input data since its an excel file, so im transferring the file using the following method
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
and in this method if i include an MM it will give me a mapping exception.
So i have to use this bean somehow and try to accomplish what we do in the udf.

Problem in finding Exact result by using the following Query

Hello,
I am finding difficulty in producing the required result by using the following Query in Reports 6i
(Note: - The query actual output and the required output are as follows: -)
SELECT
DISTINCT
SH.S_HEAD_CODE,
B.BILL_ID,
B.SANCTION_DATE,
E.EMP_NAME,
E.EMP_DESIGNATION,
B.TOTAL_BILL,
NVL((SH.INITIAL_ALLOCATION-B.TOTAL_BILL), 0) BALANCE
FROM BILL B, PARAMETERS P,SUB_HEAD SH, EMPLOYEES E, BILL_DETAIL BD
WHERE
SH.S_HEAD_CODE=B.S_HEAD_CODE
AND B.S_HEAD_CODE=BD.S_HEAD_CODE
AND B.EMP_ID_NO=E.EMP_ID_NO
AND B.BILL_ID=BD.BILL_ID
The Output of the above query is as follows: -
Let say we have Total Amount Sanctioned Rs. 15,000,00/-
Name Total Bill (Rs.) Balance (Rs.)
Sohail 7147 1492853
Saqib 2131 1497869
Amir 6802 1493198
Shafiq 1214 1498786
Note:- In the above output the above query is subtracting the current balance from Total Sanctioned Amount (Rs. 1500000) each time, but
it should actually subtract the current bill amount from the previous balance like the below said result.
Name Total Bill (Rs.) Balance (Rs.)
Sohail 7147 1492853 {Previous Balance - Current Bill Amount (1500000-7147) }........ The previous balance was actual amount Rs. 1500000
Saqib 2131 1490722 {Previous Balance - Current Bill Amount (1492853 - 2131)}
Amir 6802 1483920 {Previous Balance - Current Bill Amount (1490722 - 6802)}
Shafiq 1214 1482706 {Previous Balance - Current Bill Amount (1483920 - 1214)}
Results Continue...........................
Please help me to solve this problem.
Thank you in advance

just check if this meets your requirements,
SQL>
SQL> With t As
2 (
3 Select 'Sohail' c1 ,7147 c2 ,1492853 c3 From dual Union All
4 Select 'Saqib'   ,2131 ,1497869         From dual Union All
5 Select 'Amir'    ,6802 ,1493198         From dual Union All
6 Select 'Shafiq' ,1214 ,1498786          From dual
7 )
8 Select c1,
9         c2,
10         prv_amt - c2 current_amt
11 From
12 (
13 Select c1,
14         c2,
15         c3,
16         lag(c3,1,1500000) over(Order By c3) prv_amt
17 From t
18 );
C1             C2 CURRENT_AMT
Sohail       7147     1492853
Amir         6802     1486051
Saqib        2131     1491067
Shafiq       1214     1496655
SQL>

Lightswitch html use the 'any' query method

Hi
Can someone please tell me how i can use the "any" query method for entity collections in lightswitch html?
Thanks

Hi Xpert360
It's for a type of EntityCollection this is the code from the msls-2.5.2.vsdoc.js line 2220
any: function any(predicate) {
/// <summary>
/// Determines whether this sequence contains any
/// items that optionally satisfy a condition.
/// </summary>
/// <param name="predicate" type="Function" optional="true">
/// A function to test each item for a condition.
/// Signature: Boolean item.predicate(item)
/// </param>
/// <returns type="Boolean">
/// True if this sequence contains any items that
/// satisfy the condition, if any; otherwise, false.
/// </returns>
var result = false;
this.each(function (item) {
if (!predicate || predicate.call(item, item)) {
result = true;
return false;
return true;
return result;
Check it out and let me know if you know how to use it, my problem is how to use the call back function.
Thanks

Creating multiple tab reports using the same query in Web intelligence

Hi All,
I have created a Universe on a BW Query which has fields as below
AGE Depaatment Gender Grade
25       FIN                M            A
27       LES               F            A+
60       SWS            M             A++
Based on this data i have created a WEbi report which shows all of these data under one tab.
Now i create a new report tab in the same Webi Document by right cliicking the existing report and going to inset report and saving it.
Similarly i create two more new report tabs.
in each of these tabs i want to show data only for the concened departments.ie =1st report contains all the departments.
2nd report contains only finance data, third contains only Les data and fourth only SWs Data.
Is it possible to create this report using the same query?
Regards,
Raj.

You should use report filters, not query filters.
A query filter will affect the entire document. Every report tab that pulls data from that query will be impacted. If you start with a single report, by default it shows the data from the query. If you duplicate that report tab, then it's still attached to the first query. There are various ways to create report filters (input controls, quick filter, invoking the filter area from the toolbar) and a report filter impacts only blocks on that report tab. You can even create block filters by clicking on the block first, then creating your filter.
This is a fairly confusing bit for folks that are new to Web Intelligence.

Fetching data using the method query

Hi experts
Using the class /scmtms/if_lcp and using the method query, how to fetch the data from the business objects.
my requirement is i need to fetch the data from the BO /SCMTMS/FRIEGHTORDER and /SCMTMS/SHIPMENTREQUEST.
If any one can send the sample code for this, it will be very usefull for me.
Thanks in advance
sai
Edited by: sai sai on Jun 17, 2009 5:21 PM

report z_fo_read.
data:
lr_fro        type ref to /scmtms/if_lcp,
lr_lcp_transaction type ref to /scmtms/if_lcp_transaction.
* step 1
lr_lcp_transaction = /scmtms/cl_lcp_factory_adapter=>get_lcp_transaction_handler( ).
* Schritt 2:
lr_fro = lr_lcp_transaction->/scmtms/if_lcp_facade~get_lcp( in_bo_name = /scmtms/if_freightorder=>co_bo_name ).
constants: co_do_prefix_root_tpcharges type string value 'TRANSPORTCHARGES.ROOT'.
* Schritt 3:
data:
ls_params        type /scmtms/s_srq_rt_a_block value is initial,
ls_root_data     type /scmtms/if_freightorder=>ty_root,
ls_selection     type /scmtms/s_selection_parameter,
lt_out_messages type /scmtms/if_srvmgr_types=>ty_messages,
lt_out_node_ids type /scmtms/t_bo_node_id,
lt_root_data     type /scmtms/if_freightorder=>tt_root,
lt_items_data    type /scmtms/if_freightorder=>tt_transportchargesinfo,
ls_items_data    type /scmtms/if_freightorder=>ty_transportchargesinfo,
lt_selections    type /scmtms/t_selection_parameters,
lv_action_name   type string,
*     Notification structure
ls_change_notifications type /scmtms/if_srvmgr_types=>ty_change_notifications.
* A) Root-ID des SRQ holen, der ge-/entsperrt werden soll:
ls_selection-attribute_name = /scmtms/if_freightorder=>co_attr-root-for_id. " ID.
ls_selection-sign   = 'I'.
ls_selection-option = 'EQ'.
ls_selection-low    = '00000000000000000000000000000000800'.
*ls_selection-high   = '00000000000000000000000000000000427'.
append ls_selection to lt_selections.
call method lr_fro->query
exporting
    in_bo_node_name         = /scmtms/if_freightorder=>co_bo_node-root
    in_query_name           = /scmtms/if_freightorder=>co_query-root-root
    in_selection_parameters = lt_selections
importing
    out_node_ids    = lt_out_node_ids
    out_messages    = lt_out_messages.
* B) Daten holen:
call method lr_fro->retrieve
exporting
    in_bo_node_name        = /scmtms/if_freightorder=>co_bo_node-root
    in_node_ids            = lt_out_node_ids
importing
    out_data               = lt_root_data
    out_messages           = lt_out_messages.
read table lt_root_data into ls_root_data index 1.
The above code is a snippet, extract useful information for you.

Hard code accounts using the dynamic report templates?

Anyone ever been able to hard code accounts using the dynamic report templates?
How about getting the Property name/value fields to work?

Hi,
No, this is not possible.
In Dynamic Report templates (which are not based on EVDRE function in version 7 and below), the only thing you can do is to not use any expansion at all and to list your specific accounts on the layout itself. Or to expand your accounts based on a dimension property.
In version 7.5, all Dynamic Templates for Report and Input Schedules will use EVDRE function.
Hope this helps.
Kind Regards,
Patrick

I am using the dynamic signal analyzer.vi but this vi has the output as single precision. How can I change this to DBL precision?

I am using the dynamic signal analyzer.vi but this vi has the output as single precision. How can I change this to DBL precision? If I change the representation from single to double in the AI buffer read.vi labview returns ilegal operation and crash. I have labview 5.1 on windows 95 and one AT-MIO16XE50 DAQ board.
Thanks in advance
Ricardo.

Probably by changing the data type that lvdaq.dll expects to write to is causing the crash. I can't test this since I have only 6.1 installed now. In any case, since the daq card is only 16 bits, the single precision is probably adequate for AI Buffer Read. If you do need the greater precision later on, you should be able to change representation in any one of the upper level VIs.

Add Multiple Detail Items Using the Same Query String Parameter

I am using InfoPath 2010 and SharePoint 2010.
I have 2 forms libraries - Expense and Expense Details.
The 2 libraries are linked via a custom site column Expense ID.
The Expense form contains the main header type info you would typically find on an expense report; e.g., name, purpose, department, etc.
The Expense Details form contains multiple detail expenses related to the main expense report such as airfare, rental car, etc.
I have created a page that displays an expense report with all of the related expense detail items.
The page contains a link to add a new expense detail and passes the Expense ID of the Expense form to the Expense Detail form.
This all works fine. The problem comes in after the first expense detail form is submitted.
I can successfully submit the first detail item. However, the expense detail form loses the Expense ID that was passed to it after the first expense detail form has been submitted.
The parameter still shows in the URL but the detail form no longer shows the value of the parameter.
What do I need to do in order to be able to add multiple expense detail items using the same Expense ID that was passed to the form?
I have tried using a Submit Behavior of Open a new form, Close the form, and Leave the form open.
None of these options give me what I need. Thanks for your help.
pam

Laura Rogers Blog
In case anyone stumbles upon this looking for an answer. Laura Rogers has the answer found in the comments section of her blog above. It’s not the best but it
does work. You have to add an extra Info Path Web Form for it to work. I know, you can roll your eyes.<o:p></o:p>
Steps.<o:p></o:p>
1. Add Query String<o:p></o:p>
2. Add the extra Info Path form to the page. This form will be a hidden on the page and will receive the value from the query string.<o:p></o:p>
3. Add your original Info Path form and have it receive a parameter from the hidden Info Path form.<o:p></o:p>
Now, when you hit save and it opens a new form the 3 Info Path form will function properly. <o:p></o:p>

Corelating messages using the Dynamic Values

Hi all,
I want to collect message using BPM.I have sucessfully executed the same using corelation from one of the fields.The ID field was used for corelation
I was able to sucessfully execute the senario the messages with same ID were going to same process ID and getting collected as well
Now i wanted to have some dynamicconfiguration parameters for eg i thought i can use the filename.That is collate the messages using the filename.
I changed the corleation and tried but for each messages even with the same file name its creating a different process ID and thus my messages are not collected at all.
To tel you more about the senario i created its a file to file with BPM collecting the messages. i send the first file and then the second file also with the same file name.
I have configured the AdapterSpecific Attributes and able to view the filenames in the XML Messages header
Can anyone put some light as too why there are different Process IDs being created.I heard in some of the forums that its an error in some of the SPs
I am on XI 7.0 SP11 and think it should not be a problem.
Thanks in Advance
Rgds
Aditya

thnks for ure replies
But all of the above steps are checked
It seems that i have given the right co-relation as well but still dnt knw y i'm not able to collect the messages
The loop is defined to complete after a fixed count and the container variable increments by 1 after each loop
The senario works perfectly if i use any field corelation to collect the messages but fails when i use a dynamic value like filename. And yes i have double checked the filename they are same
Rgds
Aditya

Is it possible to use the af:query component with programmatic VOs?

My understanding is that the view criteria in a normal SQL-based VO are used to add WHERE clauses to the VO.
Since programmatic VOs do no have this capability, is there something I need to override in the view object implementation class to support the view criteria that will be established by the af:query component?
Does someone have an example of how this might be done?
Thanks, -Klaus

Unfortunately no. The remote control will work, but the radio will not.
The radio only works with the iPod video and the nano.

Oracle Repors 3.2(using the Dynamic query)

Similar Messages

Maybe you are looking for