Oracle reports 6i Bug
Hello,
In Oracle Reports Builder : suppose you have two queries, Department and employe thus two groups DEPT_GROUPE and EMP_GROUP.
If you link the two queries using DEPT_ID : The link will be well generated between the queries (the linked columns are there). Your report will run. Fine
The problem occurs if after linking your queries, you decide to change the detail query (adding a subselect in the select part, thus, transforming your detail query to non-linkable query).
In this case, Reports Builder will not complain, more than that, it will keep all the properties of your previous link as is. The only thing the report builder will do is marking your query with the non-linkable symbol.
The problem is : if your query was non-linkable before you make the link, Reports builder will complain with a message (... non-linkable, do you want to cretate a group link ?) and it will not put the linked columns in the properties of the link.
For the first case, I was expecting Report Builder to raise the same info message and especially remove the linked columns in the properties of the link.
Mohamed Dadi
maybe its a bug, but since reports 6i is desupported, there won't be any fix for it. and as you know how to avoid it, simply do so. ;)
Edited by: Andreas Weiden on 18.11.2010 19:42
Similar Messages
-
If the JSP file generated by Report Builder contains the statement,
<systemParameter name="DESTYPE" initialValue="Screen" display="yes"/>
you will receive the following error message when you try to run the report in Web Layout:
javax.servlet.jsp.JspException: REP-56092: No class defined for destination type Screen
I found the only solution to be to remove the offending statement, or set its display parameter to no. (The statement can be found in the JSP file under the <data> tag.)
This statement displays the Runtime Parameter Form dialog which is intended only for Paper Layouts. Seems as if Report Builder is reading a Paper Layout statement from the JSP file when it is executing a Web Layout command.
Another minor problem occurs when you open a report and attempt to display it in Web Layout before connecting to the database. When the Connect dialog appears, the mouse pointer remains as an hour glass.
The Report Builder came packaged with Oracle Developer Suite 10g, but the Report Builder's Help About shows version 9.0.4.2.0. However, I noticed that other copies of Oracle Developer Suite 10g came packaged with Report Builder version 10g. I can't say whether the above problems apply to these later versions of Oracle Builder or not.Hi,
There's a dedicated forum for Oracle Reports and I would suggest you to post your questions there to get answered by those who are experienced in Oracle Reports.
I did work with Oracle Reports a long time ago, so as I remember, you have to create a link between colb and colc fields. When colb is null then this link will pull over colc and print it in place of colb.
Hope this helps.
Regards
Asif Momen
http://momendba.blogspot.com -
Is this Oracle Reports bug – "break order property" in "group above" report
Is this Oracle Reports bug – “break order property” in "group above" report
Could anybody confirm that in "group above" report, we could only order the brake column's values with ""none" or "ascending" or "descending" provided by "break order property"?
In the following example, “Dept” is brake column. Oracle Reports allows us to order values in “Dept” with “descending” provided by “break order property”:
Dept 30
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 20
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 10
job ename salary
xxx xxx xxx
xxx xxx xxx
or “ascending” provided by “break order property”:
Dept 10
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 20
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 30
job ename salary
xxx xxx xxx
xxx xxx xxx
I need to do:
Dept 20
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 10
job ename salary
xxx xxx xxx
xxx xxx xxx
Dept 30
job ename salary
xxx xxx xxx
xxx xxx xxx
Could I do this? Could anybody confirm that we could never ever do this, or If yes, how?
Millions of thanks for advice.
M.Z.
Edited by: jielan on Sep 18, 2010 8:23 AMWhy should that be a bug? You have a custom requirement and have to find a way to fulfill it. But, what is your actual sorting order? Do you have only this three departments? If so, you could add an addtional column in your query like
DECODE(DEPT, 20, 1, 10, 2, 30, 3, 4) SORTINGput that column in the same group as dept and sort after that new column. -
Changing font in Oracle Report in PDF output
Hi,
I have created reports using dev10g(report builder). I can run report from client side in pdf format but I want to change the font (i.e from courier to Arial narrow).
How can I do this?
Is there anyone who can help me?
my unifont.ali file is:
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
"arial narrow" = "Arial Narrow"
Arial = helvetica
"Courier New" = courier
"Times New Roman" = times
Modern = helvetica
"MS Sans Serif" = helvetica
"MS Serif" = times
"Small Fonts" = helvetica
# Mapping from Macintosh
"New Century Schlbk" = "new century schoolbook"
"New York" = times
geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
"helvetica narrow" = "Arial Narrow"
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
"arial narrow" = "Arialn.ttf"
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
Thanks,
RafikulWelcome to OTN
Check the two link..
1. Re: Oracle Reports 10g Fonts issue
2. Re: Adding new font to my Reports Setup
Hope this will help you
Hamid
If someone's response is helpful or correct, please mark it accordingly. -
Oracle Reports - Multi lingual pdf - jvm error
Hi all,
We are trying to develop a multilingual pdf report in oracle reports 9i. When we do font subsetting or embedding we get the error:
stackpointer=3bb03200
JVMXM004: JVM is performing abort shutdown sequence
this error is consistent for font embedding, but for subsetting this error comes randomly. We are unable to find out any pattern of the error. Can any one pls give us an update on this.1) Please try in latest patchset 9.0.2.3
2) There is recently a very similar bug logged on the issue by a customer ( do not know whether it is by you :-))
BUG 3880762 - REPORTS ENGINE CRASHES WHEN GENERATING LARGE PDF SUBSETTING OUTPUT
(Not yet fixed, this bug in initial description phase)
(It gives same error)
If this is critical to you then can try getting in touch with Support to escalate the priority of the bug.
(First confirm with support whether it is the same issue)
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
--------------------------------------------------------------------------------- -
Error in job execution in oracle reports
Hi,
The end user is getting the following error when executing a job in Oracle reports.
" RWCGI GET JOB OUTPUT
Cannot get output of Job ID 4 you requested on December ,08 2008 , 11:35:18
Job is not done yet .Try again later"
Can you please help .PLEASE !!!Hi
Metalink is reporting some similar errors, please see that:
Cause
SSO turned on for one component only, either Forms or Reports.
This problem has been reported and is documented in an unpublished bug.
Solution
To take advantage of SSO, out-of-the-box, the SINGLESIGNON parameter in the
rwservlet configuration file (rwservlet.properties) is set to YES to indicate
that you will use single sign-on to authenticate users. You may change this to
NO if you choose to not use single sign-on. If you choose NO, the Reports
Server will use its own authentication mechanism to authenticate users (i.e.,
the mechanism used in Reports6i). The rwservlet configuration file is usually
found in the ORACLE_HOME\reports\conf directory. This value is usually
commented out after installation however the default value is YES.
This is the expected behavior. For the Forms/Reports integration, Forms will send
to Reports thecurrent SSO user. However, with this particular configuration, you
still log into SSO to run Reports. Thus, nexttime you run the form, you are logged
into SSO and thus things work because Forms passes thatSSO user info to Reports.
The way to not have the report run the 2nd time would be to log off of SSO when the first
form was exited, but that defeats the purpose of SSO in the first place!
So enable for Forms and Reports SSO or disable SSO for both.
Read more on Doc ID: Note:289666.1
Subject: REP-52251: Cannot Get Output Of Job Id
Doc ID: Note:289666.1
Subject: Understanding Reports Execution from Forms Under High Availability
and
Note 367887.1 - Rep-52251: Cannot Get Output Of Job Id You Requested, When Calling Reports From Forms -
Hi,
My concurrent request failed due to
Program was terminated by signal 6
Concurrent Manager encountered an error while running Oracle*Report
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Error occurred during initialization of VM
Could not reserve enough space for object heap
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xf7176d3e, pid=17695, tid=4096898752
# JRE version: 6.0_32-b05
# Java VM: Java HotSpot(TM) Server VM (20.7-b02 mixed mode linux-x86 )
# Problematic frame:
# V [libjvm.so+0x5f5d3e] ParallelScavengeHeap::tlab_capacity(Thread*) const+0xe
# An error report file with more information is saved as:
# /oracle/tst3/inst/apps/tst3_ora-web2/logs/appl/conc/log/hs_err_pid17695.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
what could be the reason behind this error.
If any one knows this Please help me..
Thank YouHi,
Please provide your environment details.
Is this a custom program? was this report working fine? If yes, what changes were made lately?
Thanks &
Best Regards, -
Specifying the output order of elements in XML using Oracle Reports.
Hi,
I am developing an Oracle Reports report, using Report
Builder 6.0.8.17.0 on WinNT. The requirement is that the report
will only ever be used to generate XML output.
However, due to a bug in the XML Parser at the other end,
it's necessary to have certain elements appear in the XML before
others.
e.g. This simplistic example shows XML output from Reports
runtime, which looks something like this:
<DEPT id="10">
<NAME>Government</NAME>
<EMP id="4435">
<SAL>12000</SAL>
<ENAME>Harry Boland</ENAME>
<EMP>
<EMP id="8643">
<SAL>21000</SAL>
<ENAME>Michael Collins</ENAME>
<EMP>
<EMP id="9900">
<SAL>47000</SAL>
<ENAME>Eamonn de Valera</ENAME>
<EMP>
<LOCATION>
<ADDRESS type="street">Kildare St.</ADDRESS>
<ADDRESS type="city">Dublin</ADDRESS>
</LOCATION>
</DEPT>
However, the application that is parsing the XML fails due to
the fact that it expects the LOCATION element to be the first
within the DEPT element. i.e. before the NAME or any of the EMP
elements.
The way I have developed this is by creating a master query
which creates a master group, G_DEPT, with two column, ID and
NAME, and two detail queries and corresponding detail groups, EMP
and LOCATION. These groups are joined to the master using the
datalink facility in Report Builder.
Is there any way in Report Builder I can specify that the
LOCATION element is to be output for each DEPT element before any
other element belonging to DEPT?
Thanks,
Iibhear.The order of the elements is determined by the order of the columns in the Data Model. Note that you can also use the "Exclude from XML output" property to completely omit columns form the XML output.
Message was edited by:
Brian Hill
This applies to Reports 10g. I don't know if it also works in 6i. -
Hi,
We are looking to change our Oracle Reports Server from version 10.1.2.0.2 to 10.1.2.2
Reason for change: To apply the patch for Bug 5739424
What will be the impact? On reports, report invocation, report generation etc.
Please give a brief description
Your inputs will be appreciated
Thanks,
KrrishHi,
Any suggestions?
I am waiting for your replies...
Please update with your valuable inputs -
Dr watson error while printing Oracle reports 6.0.5.28.0
Hi All:
I am getting this problem when I was trying to print from the perview mode of Oracle Reports(6.0.5.28.0) on Windows NT Client machine. We are using Network printer which is on Windows 2000 Server. Can you hyelp me resolve this problem.The first thing you should do would be to get onto a supported version. We've done a lot of work in the printing area in the 6.0.8 (6i) release, particularly in the latest patch set.
If this doesn't help then you should download the drivertest utility (http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip) and follow the instructions to test the driver. Then work with support to get a bug filed.
Regards,
Danny -
Running Oracle report in Portal 3.0.8 cause session invalid
Hi,
We are runnung Oracle portal30 3.0.8 in Window 2000 environment.
In one of the jsp portlet,
We set up a href link to run Oracle Report
( /dev60cgi/rwcgi60.exe?server=... ) in another browser window.
Once the report is submitted. the session got invalid....
We need to close the browser and start again. Then everything is working
fine as long as not running the Oracle Report.
When this is done in portal30 3.0.7., there is no problem at all. Is this a known bug and is there a fix for this??
Thanks
Jonathanhello,
i am not sure but this problem sound familiar. i think it has already been posted on this forum a view days ago.
the question is, how do you run the report ? when using a URL, what happens when you use a different -non report- URL ?
regards,
the oracle reports team -
Rearrange output pages with Oracle Reports
Hi
I'm using Oracle Reports Builder 10g and I need help on this subject:
I'm developing a report divided in sections that reference statistics of the partitions present in an IBM Machine. Each page in the first section appears also in the other sections of the reports, i.e. the first page of the first section (with data from partition A) has the same layout than the first page of the second section (with data from partition B in this case), which is page 14 on the final pdf report, and so on.
For each 'kind' of page in the final report I use a repeating frame that fills a whole page in the page layout in reports builder (the parameter is the partition), so I get n output pages for each page in the rdf file (n is the number of partitions). The problem: in the resulting pdf output file, the first page of first section appears first, then the first page of second section, and so on. I need the pdf to be arranged in the correct order.
Can someone help me on this subject?
Thanks and regards,
AlexHi,
We had the same problem at my organization. Our DBA had to install a patch:
To implement the solution, please apply the patchset to upgrade to 10.1.2.2.0.
To obtain a patchset from MetaLink:
1) Click on Patches & Updates.
2) Click on Simple Search
3) Select your product, release and platform.
4) Patch number is 4960210
Description PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
Product Oracle Development Tools
Release 10.1.2.2
The Patchset 4960210 is a patch for the Application Server AND Developer Suite
5) Read any applicable notes before downloading, then click the Download button.
Note: Please review the Readme file for instructions on how to install the patchset.
you should launch the installer with the executable setup.exe provided in the patchset, it could shows up a message indicating nothing was upgraded, but the release should be modified to 10.1.2.2
Hope that helps -
Oracle Reports Security Settings page is blank
Hi All,
When i click on "Oracle Reports Security Settings" under Administer tab and i'm getting a blank page. I didn't see any error messages.
Pl. help.
Thanks,
SapnaHi,
Which version of portal are you using? Looks like it is a bug.
Thanks,
Sharmila -
Reporting a bug for the C++ compiler
How do I report a bug to Oracle regarding the C++ compiler ? I am using Solaris Studio 12.3.
Here is an alternative implementation, as a file called has_xxx_test_ex.cpp, also supported by the mpl and tti code for introspecting a class/struct for a class template of a given name taking typename ( or class ) type parameters:
struct stype { template< typename T > struct xxx {}; };
typedef void boost_mpl_has_xxx_has_xxx_template_substitute0_tag ;
template < template < typename U0 > class U >
struct boost_mpl_has_xxx_has_xxx_template_substitute0
typedef boost_mpl_has_xxx_has_xxx_template_substitute0_tag type ;
template < template < typename U0 , typename U1 > class U >
struct boost_mpl_has_xxx_has_xxx_template_substitute1
typedef boost_mpl_has_xxx_has_xxx_template_substitute0_tag type ;
template < typename T >
class has_xxx_template
template < typename U , typename V = boost_mpl_has_xxx_has_xxx_template_substitute0_tag >
struct has_xxx_template_test
static const bool value = false ;
template < typename U >
struct has_xxx_template_test < U ,
typename boost_mpl_has_xxx_has_xxx_template_substitute0
< typename U :: xxx < > > :: type
>
static const bool value = true ;
template < typename U >
struct has_xxx_template_test < U ,
typename boost_mpl_has_xxx_has_xxx_template_substitute1
< typename U :: xxx < > > :: type
>
static const bool value = true ;
template < typename U >
struct has_xxx_template_introspect : has_xxx_template_test < U > { } ;
public :
static const bool value = has_xxx_template_introspect < T > :: value ;
int main()
has_xxx_template<stype> aclass;
return 0;
When this is compiled with the C++ compiler of 12.3 with this command line:
CC +d -library=stlport4 -features=tmplife -features=tmplrefstatic -g -erroff=%none -KPIC -c -o "has_xxx_test_ex2.o" "has_xxx_test_ex2.cpp"
the result is:
"has_xxx_test_ex2.cpp", line 30: Warning (Anachronism): Using xxx as a template without a declaration.
"has_xxx_test_ex2.cpp", line 54: Where: While specializing "has_xxx_template<stype>".
"has_xxx_test_ex2.cpp", line 54: Where: Specialized in non-template code.
"has_xxx_test_ex2.cpp", line 30: Error: Template template-parameter U<U0> requires a class template argument.
"has_xxx_test_ex2.cpp", line 54: Where: While specializing "has_xxx_template<stype>".
"has_xxx_test_ex2.cpp", line 54: Where: Specialized in non-template code.
"has_xxx_test_ex2.cpp", line 39: Warning (Anachronism): Using xxx as a template without a declaration.
"has_xxx_test_ex2.cpp", line 54: Where: While specializing "has_xxx_template<stype>".
"has_xxx_test_ex2.cpp", line 54: Where: Specialized in non-template code.
"has_xxx_test_ex2.cpp", line 39: Error: Template template-parameter U<U0, U1> requires a class template argument.
"has_xxx_test_ex2.cpp", line 54: Where: While specializing "has_xxx_template<stype>".
"has_xxx_test_ex2.cpp", line 54: Where: Specialized in non-template code.
"has_xxx_test_ex2.cpp", line 36: Error: Multiple declaration for has_xxx_template<stype>::has_xxx_template_test.
"has_xxx_test_ex2.cpp", line 54: Where: While specializing "has_xxx_template<stype>".
"has_xxx_test_ex2.cpp", line 54: Where: Specialized in non-template code.
3 Error(s) and 2 Warning(s) detected. -
Oracle reports don't support the full Aero Theme
iHello to all,
is possible with a workaround to have Aero theme with Oracle reports?
Same with sql developer
To enable Aero support open up sqldeveloper.conf and add the following line:
AddVMOption -Dsun.java2d.noddraw=true
ThanksSteven,
I tend to think this is related to a bug I reported earlier. Substitution string not working in interactive report
Hope the Apex team will pick up this one as well.
Jacob
Maybe you are looking for
-
What is the meaning of Rem.Order Plan in the PS cost report S_ALR_87013558
Hi, Does anyone know the meaning of "Rem. Order Plan" column in the PS Budget-related cost report-- S_ALR_87013558 Budget\actual\Commitment\Rem.Plan\Assigned? I understand all the other columns like budget, actuals, commitment and assigned, but I ha
-
Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV? Great, so
-
Is there a better way to do this Update?
Can you do the following in a better way, maybe by using some sort of join between table_a and table_b update table_a a set (column_1, column_2) = (select column_3, column_4 from table_b b where b.column_5 = a.column_6) where a.column_7 = whatever
-
Is there a way to get sentence case when typing?
my sentences always start with lower case letters. is there a format for sentence case? would really appreciate a reply because i am not a good typist. and not just this version, all older versions have had this same problem
-
HT4356 How to connect ipad2 to wireless cannon printer MX432 which also used by a dell computer
I just bought cannon mx432. I was able to set up my dell laptop but I'm unable to setup my ipad 2 . Could somebody please help . Would be much appreciated. Thanks