Oracle Schema Builder

I use to work with this tool (oracle Schema Builder) in orcal 6i
I installed orcal 10 g but i did not find this tool
where can i find it or is there other tool do it work in 10g

There are also data modeling capabilities in JDeveloper.
So it is worth taking a look at those as well:
http://www.oracle.com/technology/obe/obe1013jdev/10131/database%20development/obe_%20dbasedevmt.htm

Similar Messages

Oracle reports builder and Win7 aero theme

Hi,
I did sucessfully instaled Oracle reports builder 10gR2 (e.g. Oracle Developer Suite 10gR2 and patch 10.1.2.3) on Win7 x64 Enterprize. There was a few workarounds, but it is now ok.
Everything works just fine now, but that blink and baloon message that came on change of color sheme to Windows classic is annoying! Every time I run the Report Builder, windows is forced to change the Aero scheme ti Classic. OK, I figgured out, that if I do not use Aero, this is not an issue anymore. For me it's ok, but other developers in our company will not be glad :)
The same problem persist at Oracle SQL developer, but there is a solution for it with little change in "sqldeveloper.conf" file "AddVMOption -Dsun.java2d.noddraw=true" .
Is there any similar setting for Report builder too?
I would be werry appreciated.
Thanks.

Hello,
Have you used 64-bit binaries?
Here are the steps that you need to make sure you have accomplished themL
1- JDK 64 bits to be used
2- wls1036_generic.jar (java -jar wls1036_generic.jar) or wls1035_generic.jar . It is mandatory to use java from a 64 bits distribution. Using java 32 bits will cause problems.
3- ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1.zip
An workaround is offered in the following thread:
Oracle Reports 11g installation problem
regards,
Alex
If the answer helped, please mark it accordingly.

Confuse about Configuring Oracle Warehouse Builder

newbie here... i am abit confuse on how to configure the Oracle Warehouse builder...
I have 2 database... 1 source and 1 new one...
I understand that i have to install the Runtime Repository in the database computer and the Target Schema through the client's computer...
so all this while... i am just confuse about what to install into the source database and what to install into the new database...
Please help...

Location is a logical entity in your OWB design that can be either a database schema, a flat file location, an SAP application location etc. Once you complete your design and are ready to deploy the design into the runtime environment, you will have to 'register' the locations by providing the physical details of your location to OWB (user name/password, database, hostname etc.).
I am a bit confused by your configuration - are the source and the target in two separate schemas or in the same schema? Your posts are somewhat contradictory.
If they are in two different schemas, you should:
1. Create a source module pointing to a source schema (you can then import data object structures from the source schema - i.e. you don't have to create source tables manually in OWB, but you can import them into the module automatically). This module will have a source location (for example SRC_LOC).
2. Create a target module where all your target objects will be (i.e. where the data will be loaded). This module will have a different location (TGT_LOC). In your target module you will also create the mappings.
3. When deploying, you will register SRC_LOC with the physical details of your source schema, while the target location will be registered with the physical details of the target schema. The code generated by OWB during deployment will make sure that the data is extracted from the source schema and inserted into the target schema (either by generating and using DB links or by qualifying the schemas in the extraction queries if source and target are in the same database instance).
On the other hand, if both source and target objects are in the same db schema, you can have all your objects in the same target module and you will only have to register the location of this target module when deploying (LOC_TGT).
That said, there can be a variety of reasons why there is no data in the target after you run the extract mapping that have nothing to do with locations, such as logical errors in the mapping (an inappropriate filter or a wrong join), insufficient privileges etc. I suggest you take a look in the runtime audit browser that should contain the error messages relative to your mapping.
Regards:
Igor

Native Schema builder - enhancement request

Hi,
DB and AQ adapters have the nice capability to auto-create XSDs from Oracle ADTs. It will be nice if that can be added to Native Schema Builder wizard as another create schema option.
When you are using the adapter most likely your development skill sets are bound around the adapter technology. We are mostly relational and eBiz shop so the XML/XSD skills are not prevalent in our development team.
Regards,
Rajesh

No, it's not currently in JDeveloper. I think it is perhaps the only or at least one of the few XML development features that XML IDEs such as XML Spy still have as an advantage over JDeveloper.
We discussed this during OOW 2006 in the Regional Directors for Fusion Middleware Meeting and it seemed that product management took very serious note of this 'deficiency' . I have not been given any guarantees, but I would expect something to happen in the not too long term.
regards
Lucas

Loading Oracle Schema into XML Schema format

Hello,
I'd like to load the Oracle schema information (tables/views, columns, and constraints) into XML Schema format, then read in the XML Schema information to instantiate objects which will be used to build adhoc/dynamic queries. I have the dynamic query part working, but it was not clear to me how to convert the Oracle schema to XML Schema then XML Schema to custom objects. Does anyone have experience with this or ideas as to how to go about this?
Thanks,

Use the Oracle WebRowSet. The WebRowSet interface extends the RowSet interface and is the XML document representation of a RowSet object. A WebRowSet object represents a set of fetched database table rows, including the database metadata, which may be modified without being connected to the database.
http://www.oracle.com/technology/sample_code/tutorials/jdbc10g/webrowset/files/WebRowset.pdf
Refer chapter 10.
http://www.packtpub.com/j2ee-development-with-oracle-jdeveloper-jdbc-4.0/book
Ouput including medata as XML document:
http://www.java2s.com/Code/Java/Database-SQL-JDBC/OutputWebRowSetinXML.htm

Connecting Oracle Warehouse Builder to an Informix data source

I am having trouble connecting Oracle Warehouse Builder to my Informix database. I am getting error ORQ-28545. Here is what I did: Under Project Explorer I went to Non-Oracle under Datases. Then right click on Informix and selected New. In the Create Module Window I edit a the Location. Gave it a name, Set Type to HOST:PORT:SERVICE, enter my username, passowrd, my Host IP, left Port as default(1521), enter my Service Name, Enter the Schema. Click on Test Connection and got the above mentioned error.

Hi,
the first you should configure access to your Informix database at target Oracle DB (OWB works with non-Oracle DB over HS).
So you should perform all steps described in Oracle Database Heterogeneous Connectivity Administrator's Guide (4.1 Setting Up Access to Non-Oracle Systems):
http://download.oracle.com/docs/cd/B19306_01/server.102/b14232/admin.htm#sthref152
Oleg

Licensing about Oracle Warehouse Builder

Hi,
If we install trial version of oracle warehouse builder v 9.2 from oracle website, does anybody know whether all the functionalities of oracle warehouse builder are available or are there any restrictions in using the trial version of the oracle warehouse builder.
My second question is:
Do we need Oracle 9i database to install oracle warehouse builder.
After I installed Oracle warehouse builder when I clicked on start-->Programs-->Oracle 9i Developer Suite-->Warehouse builder-->OWB Client, when I open the OWB Client it's asking me for warehouse builder log on but it didn't ask for any username and password while I'm installing oracle warehouse builder. So, which username and password should I enter to log in to the OWB Client. And also can anyone please tell me what to enter into the Oracle Service name field.
Any help is appreciated.........
Thanks,
-Deepa.

There are no restriction in the warehouse builder version available from the OTN site. If you are using Warehouse Builder for commercial purposes (and if you want support and assistance from Oracle) you should pay for an Oracle Developer Suite license (as many of them as you have developers). currently it is $5000 per user (you also get JDeveloper, client Discoverer, BI beans etc.).
As for the OWB installation, you did not complete all the steps. After installing the software on your machine, you must install the design repository (this is when you will be asked to enter the user/password for the OWB client) and the runtime repository and schema (where you will deploy your data warehouse). For details, please read the installation and configuration guide (http://download.oracle.com/docs/html/B11000_02/toc.htm).
Regards:
Igor

Error while creating a new action in Oracle Process Builder 10gR3.

Hi,
After creating a process in Oracle Process Builder 10gR3 when I am creating a
new action then the following exception is occuring :
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an
object.
at Stellent.IBPM.Actions.ActionsToolbox.Load()
at Stellent.IBPM.Actions.SelectActionForm.ActionModuleSelectForm_Load(Object
sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr
wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1891 (QFEN-1.050727-1800)
CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
ActionLoader
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/ActionLoader/1.0.0.0__3fc10cde1afe6713/Acti\
onLoader.dll
BomInterop
Assembly Version: 1.0.0.0
Win32 Version: 8.0.0.382
CodeBase: file:///D:/Program%20Files/Stellent/IBPM/BomInterop.DLL
Stellent.IBPM.Builder
Assembly Version: 1.0.0.0
Win32 Version: 8.0.0.382
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/Stellent.IBPM.Builder/1.0.0.0__3fc10cde1afe\
6713/Stellent.IBPM.Builder.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/Sy\
stem.Drawing.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
Stellent.IBPM.Actions
Assembly Version: 1.0.0.0
Win32 Version: 8.0.0.382
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/Stellent.IBPM.Actions/1.0.0.0__3fc10cde1afe\
6713/Stellent.IBPM.Actions.dll
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1891 (QFEN-1.050727-1800)
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e\
089/System.Windows.Forms.dll
Infragistics2.Win.UltraWinTabControl.v6.2
Assembly Version: 6.2.20062.34
Win32 Version: 6.2.20062.34
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Win.UltraWinTabControl.v6.2/6\
.2.20062.34__7dd5c3163f2cd0cb/Infragistics2.Win.UltraWinTabControl.v6.2.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50\
a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System\
.Xml.dll
Infragistics2.Win.v6.2
Assembly Version: 6.2.20062.34
Win32 Version: 6.2.20062.34
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Win.v6.2/6.2.20062.34__7dd5c3\
163f2cd0cb/Infragistics2.Win.v6.2.dll
Infragistics2.Shared.v6.2
Assembly Version: 6.2.20062.34
Win32 Version: 6.2.20062.34
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Shared.v6.2/6.2.20062.34__7dd\
5c3163f2cd0cb/Infragistics2.Shared.v6.2.dll
Infragistics2.Win.Misc.v6.2
Assembly Version: 6.2.20062.34
Win32 Version: 6.2.20062.34
CodeBase:
file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Win.Misc.v6.2/6.2.20062.34__7\
dd5c3163f2cd0cb/Infragistics2.Win.Misc.v6.2.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

ORACLE reports Build 10g - Data Model - query - If statement in Alias ?

I have the following select statement. It has the alias Survivors, Deaths and "All
With the ORACLE reports Build 10g - Data Model - I have the following query statement. I require the alias to change. Can the following be done.
Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS

It is no problem, you can automatically change the complete query before the report is running, which delivers you different kind of values. But the alias names does not change in the group of the data-model, although two query are running with different alias names at different times. In the data model you see the alias names of the first implemented select statement, which are the column fields in the layout.

New to oracle report builder

Dear all;
Please pardon me. I am new to oracle report builder and I am trying to accomplish the following. First and foremost please find my pl/sql queries below. Kindly note, all the queries have been tested and I just need to be able to input those queries into the report builder. Thank you.
create or replace package test1 is
type r_cursor is ref cursor;
function report(company_name in varchar2) return r_cursor;
end test1;
create or replace package body test1 is
function report(company_name in varchar2) return r_cursor as
my_r_cursor r_cursor;
begin
if(company_name = 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t;
return my_r_cursor;
elsif(company_name != 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t
where t.t_id = company_name;
return my_r_cursor;
end if;
end;
end test1;
create table t1
t_id varchar2(200) not null,
t_description varchar2(250),
primary key(t_id)
insert into t1
(t_id, t_description)
values
('CITI', 'PROFIT: 2.2Billion');
insert into t1
(t_id, t_description)
values
('GE', 'PROFIT: 1Billion');
insert into t1
(t_id, t_description)
values
('JPMORGAN','PROFIT: 0');Now, I am trying to create a simple report in oracle report builder. The interface for generating for this report is basically, there is a dropdownlist where by the user picks a company name from the dropdownlist and clicks on the go button, this should then generate a report with the above query shown in the package. How can this be achieved? All help will greatly be appreciated.

Hi,
first of all you need strong typed ref cursor, oracle reports need to detect witch are the columns returned by your cursor.
so first you create your package
create or replace package test1
as
TYPE t_record IS RECORD ( company_number PLS_INTEGER--TABLE_NAME.COLUMN_NAME%TYPE
, company_desc VARCHAR2(150)--TABLE_NAME.COLUMN_NAME%TYPE
TYPE T_REF_CURSOR IS REF CURSOR RETURN t_record;
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor) ;
end test1;
show errors
create or replace package body test1
is
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor)
is
my_r_cursor T_REF_CURSOR;
begin
if(company_name = '1')
THEN
open my_r_cursor for
select 1 as t_id, 'description' ast_description from dual
else
open my_r_cursor for
select 2 as t_id, 'description2' as t_description from dual
end if;
end;
end test1;
show errors
then, in your report you create a ref cursor query :
function QR_1RefCurDS
return test1.t_ref_cursor
is
C_return test1.t_ref_cursor;
begin
test1.report(1,C_return);
RETURN(C_return) ;
end;
hope this helps you !
E

Getting a report in excel format from oracle report builder 10gDS release2

I want to get a report in excel format from oracle report builder 10gDS release2.
Is there ne method by which minimum effort is required for changing already made reports .
I have searched for it on internet :-
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwwhthow%7Cwhatare%7Coutput%7Coutput_a_simpleexcel~htm/
Example, given in the last of the page opened from the above url, is not working.
Can neone plz explain the example and how to use it
Thanks & Regards
JD

Ok, for the release 2 its quite straightfoward, in your calling form you would have something like this code:
declare
     pl_id ParamList;
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
v_rep_status VARCHAR2(20);
v_repsrv     VARCHAR2(100):= 'yourreportserver';
v_serv varchar2(50) := 'yourservername' ;
begin
pl_id := Get_Parameter_List('tmpdata');
if not id_null(pl_id) then
Destroy_Parameter_List( pl_id );
end if;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DESTYPE' ,TEXT_PARAMETER,'Screen' );
Add_Parameter(pl_id,'PARAMFORM' ,TEXT_PARAMETER,'NO' );
repid := FIND_REPORT_OBJECT('yourreport');     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER, v_repsrv);
set_report_object_property(repid,REPORT_DESTYPE,CACHE );
set_report_object_property(repid,REPORT_DESFORMAT,'SPREADSHEET' );
v_rep := RUN_REPORT_OBJECT(repid,pl_id);
v_rep := substr(v_rep,length(v_repsrv)+2,10 ) ;
end;
I have plenty of reports being formated to excel with this same method so it should work for you, the only diference with my previous code is this line.
set_report_object_property(repid,REPORT_DESFORMAT,'SPREADSHEET' );
The rest remains untouched.
Hope it helps.

Interfacing of oracle report builder and java

hi all,
I have build a report using Oracle Report Builder 10g.Now i want to make use of this report in displaying the data in IE using core java.
This is the first time i am using the Oracle Report Builder .
Can anyone tell me how to proceed in right direction?Do i need to have some specific Jar,Environment to accomplish this task?
Thanks in advance

I'm not sure what version of the product you're using, but since you're just installing it may well be the base version (6.0.8.8.3).
Similar issues were addressed in a patch release (6.0.8.12), which was related to issues with some types of keyboard. You may want to upgrade to the latest patch release and retry.

Using CLOBs in oracle Report Builder

I want to select all the data in a CLOB column using SQL Navigator by just doing
select entry_note
from chartentries;
just as you say in your example by it just gives me back a result of (ORACLOB).
If I do
select to_char(entry_note)
from chartentries;
I get this error.
If I do
select dbms_lob.substr(entry_note,4000,1)
from chartentries
I get this (there’s more up to 32000 characters in a clob) and these weird squares which I think are CR (carriage returns) or LF (line feeds). I don’t want to see those characters and I would like to retrieve the entire CLOB in one swoop without doing data manipulations of substringing.
Using the same data in Oracle Report Builder, I want to select all the data in a CLOB column into a field in a Paper report layout but I keep getting errors, ora-6502, and I've found out that I am restricted to 4000 characters and in Report 9i it looks like the largest field you can have is 4000 characters. My CLOB information can be up to 32000 characters long or longer and I do not want to substring out 4000 characters at a time into separate fields. In Crystal reports there is no problem just selecting the clob in a simple query and it is there in one shot. I would have thought by now that Oracle would have changed its development tools to be able to handle Clobs simply without any manipulation. Does anyone know how to do this in Report builder? I just have a simple query:
select entry_datetime,
to_char(replace((entry_note),chr(13))) as entry_note
from chartentries
where patient_id = 49741
Another thing I want to do, is call this Oracle report from a PL/SQL block passing several parameters to the report and also call a Crystal report from a PL/SQL block passing several parameters to the report. Does anyone know what the commands are?

What I had to do is create a query using query builder. This works fine; it's when trying to add the column to an existing query is where the data inconstancy error occurs. One thing you have to keep in mind is it will only work using the query builder in conjunction with the report wizard; I am not sure why. To incorporate the comments into an existing frame you will have to cut the frame created by the wizards and copy it into the existing frame. Otherwise the column name will not show in the source list of the property Inspector.
Good Luck

How to start Oracle Report Builder in Linux

Hi all
Can someone please help by telling how can i start Oracle Report Builder in Linux????
Thank you and best regards to all

Hello,
there should be a script rwbuilder.sh
in ORACLE_HOME/bin for 10.1.2.
in ORACLE_INSTANCE/config/reports/bin for 11g
Of course, you need to have a "X Display Server " up and running and the variable DISPLAY must be set to this "X Display Server "
Example :
export DISPLAY=123.456.789.12:0
$ORACLE_HOME/bin/rwbuilder.sh
Regards

Exception while opening a JSP file created using oracle report builder

I have created a JSP page which contains embedded Oracle reports build using Oracle Report Builder.
I have deployed the JSP created above to the Oracle Application Server
but when i try to open the JSP file it gives the following error:
500 Internal Server Error
javax.servlet.jsp.JspException: rwlib-1: REP-1202: ORACLE logon not specified. at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:206) at testing.test1._jspService(_test1.java:75) [SRC:/testing/test1.jsp:0] at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
can anybody help regarding this
this is of high priority to me
thanks and regards
Subhajit

bump

Oracle Schema Builder

Similar Messages

Maybe you are looking for