Oracle Service Bus, calling ejb on ormi protocol

Hi.
I'm trying to call an EJB on a Oracle Application server on the ormi protocol, but when i try to call it, I get this error:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>
General runtime error: Error accessing the JNDI context for the EJB call: java.net.UnknownHostException: Unknown protocol: 'ORMI'
</con:reason>
<con:location>
<con:node>PipelinePairNode1</con:node>
<con:pipeline>PipelinePairNode1_request</con:pipeline>
<con:stage>stage1</con:stage>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
I have my business service referencing a local jndi provider which in turn points to the remote server, on the ormi protocol.
Could I be missing some libraries?

I have my business service referencing a local jndi provider which in turn points to the remote server, on the ormi protocol.
Could I be missing some libraries?EJB transport doesn't support ORMI. Protocols supported by JNDI Provider resource are documented. Click help on you JNDI provider page.
supported protocols : http, https,t3, t3s, iiop,iiops.
Only BPEL transport supports ORMI (http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/bpelpmtransport/transport.html)
cheers
Manoj
Edited by: mneelapu on Jun 8, 2009 2:39 PM

Similar Messages

Calling Oracle BPM Process Web Service from Oracle Service Bus

Hi
I am using Oracle Service Bus 10gR3.
I have developed simple BPM process through Oracle BPM studio 10.3.1.0.I then followed steps below
1. Create a Process.
2. Expose the Process as a Web Service.
3. Run the project. This starts the Process Execution Engine.
4. Create an ALSB External Resource of type Management Host.
5. Create a second ALSB External Resource for registration.
6. Register the End Point
Until this point everything is fine. Then I created one project through Oracle Service Bus console. Under that created WSDL, Proxy Service and Business Service Folders. I am using the web service created through BPM studio as teh Business Service in SB . I then created one proxy service to route the request to the Business Service.
Finally when I try to test the Proxy Service by launching test console, I get the
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380001</con:errorCode>
<con:reason>INTERNAL SERVER ERROR</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
I also tried to debug through "Oracle Workshop for WebLogic Version 10.3 " . But I am not getting enough details as to why this is failing.
Please help me . Thanks In advance.
Thanks
Nilay
Edited by: user8950019 on Feb 1, 2010 4:11 AM

Hi,
When im calling wsdl created when BPM exposed as webservice in SOAP-ui, i first hit the startSession
Request is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:startSession>
<password>Employee</password>
<user>Employee</user>
</exp:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response i Get is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:startSessionResponse xmlns:ns1="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<return>3782hecq1s85h</return>
</ns1:startSessionResponse>
</soapenv:Body>
</soapenv:Envelope
but when i put this sessionId in main request:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:expenseReport>
<sessionId>3782hecq1s85h</sessionId>
<reportArg>

<comments>yes</comments>

<costCenter>jaa</costCenter>

<description>aa</description>

<isApproved>y</isApproved>

<items>

<elements>

<amount>700</amount>

<date>?</date>

<description>?</description>

<receiptChecked>?</receiptChecked>
</elements>
</items>

<reviewedBy>?</reviewedBy>

<submitDate>?</submitDate>

<submittedBy>?</submittedBy>

<total>?</total>
</reportArg>
</exp:expenseReport>
</soapenv:Body>
</soapenv:Envelope>
Response coming is :-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.</faultstring>
<detail>
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:244)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.soaptype.SoapListener.invokeDynamic(SoapListener.java:104)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.RuntimeException: java.lang.NumberFormatException: For input string: "jaa"
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:36)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     ... 21 more
Caused by: java.lang.NumberFormatException: For input string: "jaa"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at fuego.util.Conversion.tojava_lang_Integer(Conversion.java:934)
     at fuego.xobject.runtime.ConversionUtilities.fromString(ConversionUtilities.java:56)
     at fuegoblock.xml.XmlElementDeserializer.deserializeElement(XmlElementDeserializer.java:175)
     at fuegoblock.xml.XmlElementDeserializer.deserialize(XmlElementDeserializer.java:81)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:160)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:119)
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:17)
     ... 28 more</ns1:stackTrace>
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">D-113014550</ns2:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
can anyone explain why this error is coming.?
Edited by: user8937128 on May 19, 2010 6:58 AM

Unable to call BPM process webserivce from Proxy in oracle Service bus

I created business service in oracle service bus through BPM process WSDL. later Created proxy out of business service. In proxy service MessageFlow I created a route node with service as my BPM process business service. When i invoke proxy I am always getting the following error.
Request :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:proc="http://bea.com/albpm/Sapme_test_1/Process">
<soapenv:Header/>
<soapenv:Body>
<proc:startSession>
<password>Participant</password>
<user>Participant</user>
</proc:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: General runtime error: socket write error: Connection aborted by peer</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: socket write error: Connection aborted by peer</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
I tried the same example with general webservice instead of BPM Process it is working fine.
regards,
pv

Even Some times I am getting the following error
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: BAD REQUEST</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>BAD REQUEST</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
regards,
pv

Access Oracle Service Bus objects from within a PBL program

Followed instructions from Studio Reference documentation for cataloging Oracle Service Bus objects and embedded sample code but encountered http 404 not found error. Is there anyway to trace the call made to the Service Bus? I change the log message severity level for Workspace application to debug but the call is not logged. The following is the output from the log:
================Oracle® BPM - WorkSpace================
RUNTIME:fuego.papi.exception.ActivityFailedException: Activity '/ExpenseReport#Default-1.0/GlobalCreation[CreateExpenseReport]' task '' could not execute successfully.
RUNTIME:Detail:Method: '', Exception: 'The method 'CIL_createExpenseReportCreateExpenseReportIN' from class 'oracle.ExpenseReport.Default_1_0.Instance' could not be successfully executed.'
RUNTIME:
RUNTIME:     at fuego.papi.exception.ActivityFailedException.create(ActivityFailedException.java:66)
RUNTIME:     at fuego.server.AbstractProcessBean.createActivityFailedException(AbstractProcessBean.java:3561)
RUNTIME:     at fuego.fengine.FEngineProcessBean.createActivityFailedException(FEngineProcessBean.java:371)
RUNTIME:     at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2968)
RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
RUNTIME:     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
RUNTIME:     at java.lang.reflect.Method.invoke(Unknown Source)
RUNTIME:     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
RUNTIME:     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
RUNTIME:     at fuego.component.Message.process(Message.java:585)
RUNTIME:     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
RUNTIME:     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
RUNTIME:     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
RUNTIME:     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
RUNTIME:     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
RUNTIME:     at fuego.component.CustomExecution.next(CustomExecution.java:176)
RUNTIME:     at fuego.papi.impl.rmi.RMIExecution.next(RMIExecution.java:109)
RUNTIME:     at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
RUNTIME:     at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
RUNTIME:     at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
RUNTIME:     at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
RUNTIME:     at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
RUNTIME:     at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
RUNTIME:     at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:229)
RUNTIME:     at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:220)
RUNTIME:     at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
RUNTIME:     at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:83)
RUNTIME:     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
RUNTIME:     at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
RUNTIME:     at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
RUNTIME:     at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
RUNTIME:     at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
RUNTIME:     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
RUNTIME:     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
RUNTIME:     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
RUNTIME:     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
RUNTIME:     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
RUNTIME:     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
RUNTIME:     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
RUNTIME:     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
RUNTIME:     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
RUNTIME:     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
RUNTIME:     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
RUNTIME:     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
RUNTIME:     at java.lang.Thread.run(Unknown Source)
RUNTIME:Caused by: fuego.lang.ComponentExecutionException: The method 'CIL_createExpenseReportCreateExpenseReportIN' from class 'oracle.ExpenseReport.Default_1_0.Instance' could not be successfully executed.
RUNTIME:     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:519)
RUNTIME:     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:273)
RUNTIME:     at fuego.fengine.FEEngineExecutionContext.invokeMethodAsCil(FEEngineExecutionContext.java:219)
RUNTIME:     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1280)
RUNTIME:     at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:401)
RUNTIME:     at fuego.server.execution.GlobalTaskExecution.invoke(GlobalTaskExecution.java:146)
RUNTIME:     at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:513)
RUNTIME:     at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:697)
RUNTIME:     at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:657)
RUNTIME:     at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:154)
RUNTIME:     at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:116)
RUNTIME:     at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:96)
RUNTIME:     at fuego.server.execution.microactivity.GlobalCreationMicroActivity.execute(GlobalCreationMicroActivity.java:109)
RUNTIME:     at fuego.server.execution.microactivity.GlobalInteractiveMicroActivity.execute(GlobalInteractiveMicroActivity.java:73)
RUNTIME:     at fuego.server.AbstractProcessBean$44.execute(AbstractProcessBean.java:2961)
RUNTIME:     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
RUNTIME:     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
RUNTIME:     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
RUNTIME:     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
RUNTIME:     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
RUNTIME:     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
RUNTIME:     at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2954)
RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
RUNTIME:     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
RUNTIME:     at java.lang.reflect.Method.invoke(Unknown Source)
RUNTIME:     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
RUNTIME:     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
RUNTIME:     at fuego.component.Message.process(Message.java:585)
RUNTIME:     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
RUNTIME:     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
RUNTIME:     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
RUNTIME:     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
RUNTIME:     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
RUNTIME:     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
RUNTIME:Caused by: fuego.lang.RuntimeCILExecutionException: <?xml version="1.0" encoding="UTF-8" ?>
RUNTIME:<string>return code: 404
RUNTIME:<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
RUNTIME:<HTML>
RUNTIME:<HEAD>
RUNTIME:<TITLE>Error 404--Not Found</TITLE>
RUNTIME:<META NAME="GENERATOR" CONTENT="WebLogic Server">
RUNTIME:</HEAD>
RUNTIME:<BODY bgcolor="white">
RUNTIME:<FONT FACE=Helvetica><BR CLEAR=all>
RUNTIME:<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
RUNTIME:<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
RUNTIME:</FONT></TD></TR>
RUNTIME:</TABLE>
RUNTIME:<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
RUNTIME:</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
RUNTIME:</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
RUNTIME:</FONT></TD></TR>
RUNTIME:</TABLE>
RUNTIME:
RUNTIME:</BODY>
RUNTIME:</HTML>
RUNTIME:</string>
RUNTIME:
RUNTIME:     at fuego.components.ScreenFlow.rethrowUserException(ScreenFlow.java:274)
RUNTIME:     at fuego.components.ScreenFlow.propagateParentException(ScreenFlow.java:239)
RUNTIME:     at xobject.Fuego__AutoGen__Screenflows__.__SubmitReport.Begin_Invocator(__SubmitReport.xcdl:13)
RUNTIME:     at oracle.ExpenseReport.Default_1_0.Instance.CIL_createExpenseReportCreateExpenseReportIN(Instance.xcdl:3)
RUNTIME:     at oracle.ExpenseReport.Default_1_0.Instance.CIL_createExpenseReportCreateExpenseReportIN(Instance.xcdl)
RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
RUNTIME:     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
RUNTIME:     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
RUNTIME:     at java.lang.reflect.Method.invoke(Unknown Source)
RUNTIME:     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:512)
RUNTIME:     ... 35 more

You are receiving a 404 error which means that the binding to the SB is not correct or there is a problem with the SB end part of the integration.
Are you able to test this successfully from an automatic activity for example aside from trying to use it within a screenflow ?
Thanks !
eduardoc.

Handling Sequence of Services in Oracle Service Bus 11g

Hi there,
I am very new to Oracle Service Bus, I want to achieve the following sequence of operations in OSB, please help me or guide me how to achieve it in sequence manner.
1) Transfer .txt file from STFP server to local shared folder.
2) Calling EJB service to process (Read the file) and insert/update in DB.
3) Once the EJB service operation is over, transfer the file from local folder "Inbox" to local folder "archive" folder.
4) Sent the success or failure batch job email message to administrator.
Thanks in Advance.
Regards,
Raj

Hi,
I've created the 2 Proxy services and related business services, one service is used to move the file from one location to another and another service is used to call the EJB (using JEJB transport). I am using the sequential service call to call one after another (1st Move file then Call JEJB). The following error I am getting, pls help me to resolve this issue.
<Jun 3, 2013 11:48:47 AM SGT> <Error> <OSB Kernel> *<BEA-380003> <Exception on TransportManagerImpl.sendMessageAsync: unchecked exception:, java.lang.IllegalStat*
**eException: [JEJBTransport:387313]Colocated call is not supported by JEJB transp ort provider.*java.lang.IllegalStateException: [JEJBTransport:387313]Colocated call is not supported by JEJB transport provider.*
at com.bea.wli.sb.transports.jejb.JEJBTransportProvider.sendMessageAsync
(JEJBTransportProvider.java:860)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
>
Thanks.
Edited by: 966429 on Jun 3, 2013 2:45 AM

Need to Import an application built using Oracle Service Bus on Oracle Public Cloud

I have built an application using Oracle Service Bus (OSB) eclipsed IDE which transfers file from server1 to server2, reads the transferred file, transforms it into a payload and calls a webservice. I have tested this application locally by installing Oracle Service Bus on one on my servers.
I have java as a service account on Oracle Public Cloud. I would like to import the above application onto Oracle Public Cloud. I am not sure if the Weblogic domain on Oracle Public Cloud has enabled OSB or not.
Let me know if someone can help me.

Hello,
Oracle Service Bus is currently not supported in Oracle Java Cloud Service.
Oracle Java Cloud Service supports deployment of JavaEE and ADF applications.
-- Nilesh

Error using the test console of the Oracle Service Bus 11gR1

Hi I am facing a an issue while using the test console of the Oracle Service Bus 11gR1 .
Every time I try to execute a business service or a proxy service I end up getting the following message.
Error Accessing Test Configuration
*"Test Console" service is not running. Contact administrator to start this service.*
In fact to add to my frustration I am unable to execute any of my proxy services from outside clients like SOAPUI as well.
Is anyone else facing this too ??
Also every time the server starts I can see some diagnostic error messages on my Eclipse console.
*[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.*
Attached the whole log at the end below.
To provide an update on my trouble shooting
1. ) I tried to give the IntegrationAdmin and IntegrationDeployer roles to my admin user. in fact i also tried to give it all the possible privileges.
Result: Still the same error message.
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
2.) I have already tried to change the following entry <java:alsb-test-console-debug>true</java:alsb-test-console-debug> in my C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\alsbdebug.xml
I am also attaching the file contents here
<java:sb-debug-logger xmlns:java="java:com.bea.wli.debug">
<java:alsb-stages-transform-runtime-debug>false</java:alsb-stages-transform-runtime-debug>
<java:alsb-alert-manager-debug>false</java:alsb-alert-manager-debug>
<java:alsb-credential-debug>false</java:alsb-credential-debug>
<java:alsb-jms-reporting-provider-debug>false</java:alsb-jms-reporting-provider-debug>
<java:alsb-management-credential-debug>false</java:alsb-management-credential-debug>
<java:alsb-management-dashboard-debug>false</java:alsb-management-dashboard-debug>
<java:alsb-management-debug>false</java:alsb-management-debug>
<java:alsb-management-user-mgt-debug>false</java:alsb-management-user-mgt-debug>
<java:alsb-module-debug>false</java:alsb-module-debug>
<java:alsb-monitoring-aggregator-debug>false</java:alsb-monitoring-aggregator-debug>
<java:alsb-monitoring-debug>false</java:alsb-monitoring-debug>
<java:alsb-pipeline-debug>false</java:alsb-pipeline-debug>
<java:alsb-security-wss-debug>false</java:alsb-security-wss-debug>
<java:alsb-service-account-manager-debug>false</java:alsb-service-account-manager-debug>
<java:alsb-service-provider-manager-debug>false</java:alsb-service-provider-manager-debug>
<java:alsb-service-repository-debug>false</java:alsb-service-repository-debug>
<java:alsb-service-security-manager-debug>false</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>false</java:alsb-service-validation-debug>
<java:alsb-test-console-debug>true</java:alsb-test-console-debug>
<java:alsb-transports-debug>false</java:alsb-transports-debug>
<java:alsb-uddi-debug>false</java:alsb-uddi-debug>
<java:alsb-wsdl-repository-debug>false</java:alsb-wsdl-repository-debug>
<java:alsb-wspolicy-repository-debug>false</java:alsb-wspolicy-repository-debug>
<java:alsb-security-encryption-debug>false</java:alsb-security-encryption-debug>
<java:alsb-security-module-debug>false</java:alsb-security-module-debug>
<java:alsb-sources-debug>false</java:alsb-sources-debug>
<java:alsb-custom-resource-debug>false</java:alsb-custom-resource-debug>
<java:alsb-mqconnection-debug>false</java:alsb-mqconnection-debug>
<java:alsb-throttling-debug>false</java:alsb-throttling-debug>
<java:alsb-flow-resource-debug>false</java:alsb-flow-resource-debug>
<java:alsb-flow-transport-debug>false</java:alsb-flow-transport-debug>
<java:alsb-flow-deployment-debug>false</java:alsb-flow-deployment-debug>
<java:alsb-debugger-debug>false</java:alsb-debugger-debug>
<java:alsb-console-debug>false</java:alsb-console-debug>
<java:alsb-result-caching-debug>false</java:alsb-result-caching-debug>
<java:alsb-bpel-debug>false</java:alsb-bpel-debug>
<java:alsb-jca-framework-adapter-debug>false</java:alsb-jca-framework-adapter-debug>
</java:sb-debug-logger>
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\home11g\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\home11g\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\home11g\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
<30-Jun-2010 16:22:43 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30-Jun-2010 16:22:47 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30-Jun-2010 16:22:48 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:22:48 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30-Jun-2010 16:22:56 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log.>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "wlsbjmsrpDataSource". Connections will not be tested.>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source wlsbjmsrpDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<30-Jun-2010 16:25:35 o'clock BST> <Alert> <OSB Security> <BEA-387068> <There is no PKI credential mapper provider configured in your security realm. Service key provider management will be disabled. Configure a PKI credential mapper provider if you need service provider support. This is typically the case if you have Oracle Service Bus proxy services with web service security enabled or outbound 2-way SSL connections.>
<30-Jun-2010 16:25:40 o'clock BST> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.128.2.170:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "OSB_domain" running in Development Mode>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
This is really putting me off and its really disappointing to see all these issues in this new release.
How can oracle let a release slip in with such a Major Issue.
Please can any one help or provide a work around atleast.
Regards
Nitin

I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
startManagedWeblogic.cmd <nameOfManagedServer>
for eg. -
D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
Once this server is up and running, try using test console.
Regards,
Anuj

What are the differences between Oracle Service Bus 10g and WLI 10g?

Hi,
To me both Oracle Service Bus 10g R3 and Weblogic Integration 10g seem to offer the same functionalities for implementing an enterprise middleware.
I would be grateful if someone could:
1. provide me with the two products' differences.
2. describe what their roadmap is?
3. what are their positioning in the Oracle product catalog? Are they both members of Oracle SOA Suite? Fussion Middleware?
Thanks a lot,
Best regards,
Babis.

Thanks everyone for taking the time to reply,
Eduardo: the answer to your questions are that all the flows will be short-lived but if we can make long-lived flows then we might consider developing them. We would need to persist the state of the flow somehow.
I understand that some of our requirements would be better accomodated by WLI or bpel but we don't have an option but only to use OSB.
So, do you think we could overcome the stateless nature of OSB by:
1. writing to appropriate tables and reading from there and calling plsql procedures from the flows
2. using JMS queues.
In detalis:
1. Regarding the writing/reading from Databases (in our case it would be oracle 10g R2 - probably RAC), is there something like a Database control in WLI, which we could use in OSB? What i have seen are using xquery execute-sql function or a JCA DB adapter but both of them seem to me not very easy to use. Is there another option?
2. Regarding the JMS, in case that i want:
a service that writes to a JMS queue what are the servicetype and transport that i should use?
a service that reads from a JMS queues what are the service type and transport that we should used?
Any information that you may share with me in the design and implementation of the above would be great.
Thanks a lot.

Oracle Service Bus 10.3 - split join how to set header for invoked service

In Oracle Service Bus 10.3 how can I set the header for the service being invoked. We make parallel calls to 2 different business services. One of the invoked service requires header to be set and I am unable to figure out how it can be done. Below are snippet of the code and WSDL.
--- Login Operation start ---
<operation name="login">
<wsdlsoap:operation soapAction="blah"/>
<input name="loginRequest">
<wsdlsoap:body use="literal"/>
<wsdlsoap:header message="passport:loginHeader" part="hppwsHeaderElement" use="literal"/>
</input>
<output name="loginResponse">
<wsdlsoap:body use="literal"/>
</output>
<fault name="genericFaultException">
<wsdlsoap:fault name="genericFaultException" use="literal"/>
</fault>
</operation>
--- Login Operation end ---
--- hppwsHeader Element --
<complexType name="hppwsHeaderElement">
<sequence>
<element maxOccurs="1" minOccurs="0" name="version" type="tns1:version"/>
<element maxOccurs="1" minOccurs="0" name="tx-id" type="tns1:tx-id"/>
<element maxOccurs="1" minOccurs="1" name="systemLangCode" type="xsd:string"/>
</sequence>
</complexType>
--- LoginRequest Element ---
<xs:element name="loginRequestElement" type="s0:loginRequestType"/>
<xs:complexType name="loginRequestType">
<xs:sequence>
<xs:element name="userId" minOccurs="1" maxOccurs="1" type="xs:string"/>
<xs:element name="password" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
--- LoginResponse Element ---
<xs:element name="loginResponseElement" type="s0:loginResultType"/>
<xs:complexType name="loginResultType">
<xs:sequence>
<xs:element name="sessionToken" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
In Oracle Workshop for WebLogic when I create a split-join .flow file while adding the invoke service call to login operation I am prompted to create the loginRequest and loginResponse variables. I can assign the appropriate expression to loginRequest.loginRequestElement prior to making the invoke call but then the backend business call fails because "systemLangCode" is not defined and set. Actual fault is
<ns1:genericFault xmlns:ns1="http://hppcbl.globalops.company.com/webservice">
<systemLangCode>en</systemLangCode>
<fault>
<ruleNumber>589</ruleNumber>
<fieldName>systemLangCode</fieldName>
<code>field.empty</code>
<desc>System language code is required.</desc>
<ftype>2</ftype>
</fault>
</ns1:genericFault>
I would really appreciate if someone could guide me on how to resolve this
Regards,
-Nilay

There is this $header variable which you should populate before calling the BS. What is the type of BS? If it is WSDL BS , Any Soap BS then above solution will work. I assume that yours is WSDL based BS and setting $header should resolve this issue.
AnyXML and Messaging type BS services requires that you create proper pay load (setting $header will not work).
There is also other actions Set Transport Headers {outbound request/inbound response} which can be used to set transport related headers but not soap headers.
Manoj

SOAP Header Security in Oracle Service Bus

Currently we are in the process of implementing the SOAP Header Security through Oracle Service Bus. We have a requirement that BPEL need to call a external web service. That web service will be registered in OSB. While making the call, the OSB need to add the SOAP security header(user name & Pwd) in proxy service before forwarding the request to business service. Can you please help me find some information about that.

Hi Manoj,
The request payload which is going to the target is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<man:GetDefaultRechargeValuesRequest xmlns:man="http://www.NII.com/ManagePrepaidRecharge/workflow/ManagePrepaidRecharge">string</man:GetDefaultRechargeValuesRequest>
</soapenv:Body>
</soapenv:Envelope>
whereas the target expects the soap header populated. the payload expected by the target is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<gsa:Authentication xmlns:gsa="http://www.nextel.com.br/Wbs/Gsa">
<gsa:Account>test</gsa:Account>
<gsa:Password>test</gsa:Password>
<gsa:Guid>f65748e63b01</gsa:Guid>
</gsa:Authentication>
</soap:Header>
<soapenv:Body>
<man:GetDefaultRechargeValuesRequest xmlns:man="http://www.NII.com/ManagePrepaidRecharge/workflow/ManagePrepaidRecharge">string</man:GetDefaultRechargeValuesRequest>
</soapenv:Body>
</soapenv:Envelope>
The Problem now is, when i call a business service(WSDL of the target) from a proxy service and when i set the above expression to the $header using replace action in the proxy service itself, the above expression,instead of going as a request to the business service, it is populated in the response.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<gsa:Authentication xmlns:gsa="http://www.nextel.com.br/Wbs/Gsa">
<gsa:Account>test</gsa:Account>
<gsa:Password>test</gsa:Password>
<gsa:Guid>f65748e63b01</gsa:Guid>
</gsa:Authentication>
</soap:Header>
<soapenv:Body>
<ns0:GetDefaultRechargeValuesResponse xmlns:ns0="http://www.NII.com/ManagePrepaidRecharge/workflow/ManagePrepaidRecharge">
<ns0:StandardHeaderBlock>
<ns2:ServiceState xmlns:ns2="http://xmlns.oracle.com/apps/StandardHeaderBlock">
<ns2:errorCode>SOA_ERR_TARGET_SYSTEM_FAILURE</ns2:errorCode>
<ns2:errorDesc>
OSB Service Callout action received an error response
</ns2:errorDesc>
</ns2:ServiceState>
</ns0:StandardHeaderBlock>
</ns0:GetDefaultRechargeValuesResponse>
</soapenv:Body>
</soapenv:Envelope>
Since the authentication details are not reaching the target, it is giving a target system failure. Can you suggest a remedy to this please.

Query regarding the tutorial for Oracle Service Bus (OSB 10gR3)

Hi,
I am working on a tutorial of Oracle Service Bus (OSB 10gR3).
I have created the proxy service and the Business Service, using Oracle Service Bus console.
The details are as follows:
Proxy service: LoanGateway
Business service1: A value of 4.9 or less causes the message to be routed to the ManagerLoanReview business service.
Business service2: A value of 5.0 or greater causes the message to be routed to the NormalLoan business service.
When i send the request message, so that it gets routed from proxy service to one of the business service than it gives following error.
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<exam:processLoanApp xmlns:exam="http://example.org">
<loanRequest xsi:type="java:LoanStruct" xmlns:java="java:normal.client" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<java:Name>Smith</java:Name>

<java:SSN>1234567</java:SSN>

<java:Rate>4.1</java:Rate>

<java:Amount>9000000</java:Amount>

<java:NumOfYear>10</java:NumOfYear>

<java:Notes>Manager Loan Application Review Service</java:Notes>
</loanRequest>
</exam:processLoanApp>
</soapenv:Body>
</soapenv:Envelope>
Response Document
The invocation resulted in an error: .
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>
BEA-380002: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380002</con:errorCode>
<con:reason>
Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:metadata>

I have the same problem and I'm not able to telnet localhost on port 7021. How can I change this port number I think that port must be 7001, it is correct?Examples server domain is pre-configured for port 7021. The samples domain will have the examples properly deployed in this domain out of box. You dont need to change any thing in {BEA_HOME}\osb_10.3\samples\domains\servicebus\config.
I doubt this has to do something with firewall . Check the last statement in the log after starting the domain.
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.177.242.25:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "mneelapu", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "XYZ-v411-10-177-242-25.oracle.com", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
What are you seeing in your log file?
Edited by: mneelapu on May 19, 2009 9:58 AM

Getting error "URI index 0 is not valid" in Oracle Service Bus

Dear Friends,
I am receiving an error "URI index 0 is not valid" while executing Customization File in Oracle Service Bus. I am not able to figure out why it is happening. Please help.
Thank you.
Regards,
Palak Mathur

AbhishekJ wrote:
Change the:
<xt:value>
<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>
<weight>1</weight>
</tableElement>
</xt:value>Section to:
<xt:value>
<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>
<tran:weight>1</tran:weight>
</tran:tableElement>
</xt:value>in your Customization File and try again.Hi Abhishek,
I did the same thing. Actually, the deployment team was getting this error and they called me up to find out. I analyzed and sent the following response:-
I was going through the Customization file. I removed all the elements from the file and started with only 1 envValueAssignments:-
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Weight</xt:envValueType>+
+<xt:location>0</xt:location>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>+
+</cus:envValueAssignments>+
The customization file got executed perfectly. Then I added another envValueAssignments and it worked fine as well.
Now, when I added
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Table</xt:envValueType>+
+<xt:location xsi:nil="true"/>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value>+
+<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>+
+<weight>0</weight>+
+</tableElement>+
+</xt:value>+
+</cus:envValueAssignments>+
+, I got the above error, ie URI index 0 is not valid. If you check each element then you will know that tableElement defines a namespace as xmlns:tran="http://www.bea.com/wli/sb/transports" which is neither being used by the node nor its child elements. Also the error in server logs was:-com.bea.wli.sb.transports.TransportException: URI index 0 is not valid.+
It stuck that we were doing something wrong here. I checked other elements in the same file and found that some of them were starting the node as <tableElement xmlns="http://www.bea.com/wli/sb/transports">. So, tableElements should be qualified with this namespace:-http://www.bea.com/wli/sb/transports. It was clear there was issue with qualified name of the element and hence I added the prefix "tran" and made entry as:-
+<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>+
+<tran:weight>0</tran:weight>+
+</tran:tableElement>+
When I executed the changed customization file it worked. I checked with few more elements and they all worked making me sure that this was the error.
So, the issue was that the OSB was not able to find any URI and for index 0 there was no URI available. Hence we were getting a weird error which was not at all user friendly. However, while making the OSb they must have thought that no one will make any manual changes (by hand in the file) and this error would be sufficient to tell that there is something wrong with the customization and we must regenerate the customization file.
Only solution that we do not receive this error in future is rather than making changes to the customization file manually we should use OSB console or scripts to replace the properties. Otherwise we need to be very careful while touching the Customization file.
Hope this helps.

Resilience in oracle service bus

HI to all,
I'm getting a problem because i have have a process in oracle service bus, that have a split-join and when a OSB server is shutdown the split-join stop and when the server are started up it don't restart i can i have resilience to overcome this problem.
Best Regards

Hi,
Documentation states:
Split-Joins provide support for propagating transactions. Operations set with a QoS of Exactly Once are executed in the transaction. Operations set with a QoS of Best Effort do not execute in the context of a transaction.
Split-Joins do not handle transaction rollback in the case of exceptions. It is the responsibility service component that called the Split-Join to handle transaction exceptions and rollback.
The last statement is quite difficult to understand... I believe you need to handle a fail in the caller of the split join and possibly do a retry from there... The split join won't restart by itself...
Ref doc...
http://docs.oracle.com/cd/E28280_01/dev.1111/e15866/tasks.htm#i1150626
Cheers,
Vlad

[OSB] - Oracle Service Bus 11gR1 ?

Hi everyone!
I'm evaluating Oracle Service Bus 10gR3 (10.3.1.0) which I downloaded from http://www.oracle.com/technology/products/integration/service-bus/index.html . Since I've seen that lots Oracle Products are alreadly released as of the platform 11g I'd like to know what are the Oracle plans for the OSB. Is there a new version at development to be added to the 11g platform ? I've read an Oracle Statement of Direction regarding a merge between OESB and OSB but it wasn't clear about some issues:
1- If I'm developing an application with eclipse using the current 10.3.1.0 version is there gonna have big changes in the 11g version?
2- Is the Oracle Workshop for Weblogic plugin for eclipse gonna be continued ? Because I'm using it.
As I understood from the document, OSB will "envelop" the OESB which will serve as a Mediator component, so I suppose I can keep using OSB now and adapt it for the 11g platform, is that right ??
Thanks

1- If I'm developing an application with eclipse using the current 10.3.1.0 version is there gonna have big changes in the 11g version?No. Your application (called configuration in OSB parlance), will be compatible when you migrate to OSB 11g Version. OSB auto upgrades when the configuration developed in OSB 10.3.1.0 is imported into OSB 11g.
For your evaluation, I have seen configurations developed during ALSB2.1, deploy into OSB 10.3.1.0 with out any issues (though documentation doesn't explicitly mention or guarantee this).
2- Is the Oracle Workshop for Weblogic plugin for eclipse gonna be continued ? Because I'm using it.Eclipse based development environment (OEPE) will be supported with OSB 11g. This OEPE based environment will offer all functionality that is being currently offered by Oracle Workshop for Weblogic.
As I understood from the document, OSB will "envelop" the OESB which will serve as a Mediator component, so I suppose I can keep using OSB now and adapt it for the 11g platform, is that right ??Absolutely, configuration developed in OSB10.3.10 can be used out of box in OSB11g.
Manoj

Oracle Service Bus 10.3.1 proxy consuming jms (AQJMS)

Hi,
I need to use AQJMS with Oracle Service Bus proxy.
We have an installation with WLS 10.3 and OSB 10.3.1 and another with WLS 10.3.1 where I defined a JMS Foreign Server like appears in the documentation http://download.oracle.com/docs/cd/E12839_01/web.1111/e13738/aq_jms.htm#JMSAD565.
I need support to how to define the URI at the OSB configuration.. jms://server:port/XAQueueConnectionFactory/QueueName... because I tried a lot of ways and can't make it work.
Thank You in Advance...
Juan Pablo

Hi,
Because I want to use the jms protocol... because if I change AQJMS with another JMS Provider the only thing that I must change in OSB is jms://server:port/CF/Q
In SOA Suite 10.1.3.x I use JMS Adapter for this...
Thank You.
JP

Oracle Service Bus, calling ejb on ormi protocol

Similar Messages

Maybe you are looking for