Oracle SOA not starting Unrecognized option: -jrockit

Hi,
I installed Oracle SOA 11.1.1.5 on my windows 7 box. Downloaded the 64 bit JDK also. But when I run startWebLogic.cmd am getting the below error. It keeps complaining about -jrockit option don't know where it's coming from I don't have JRockit installed anywhere on the system so wondering where is this picking from.
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
C:\Software\install\Java\JDK17~1.0_1\bin\java -jrockit -Xms768m -Xmx1536m -Dwe
blogic.Name=AdminServer -Djava.security.policy=C:\Software\install\fmw\WLSERV~1.
classpath weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.Thanks

Hi:
Did u try to remove *"-jrockit"* and start the server? Also what is the JAVA_HOME you have set?
Regards,
RK

Similar Messages

Starting Web Logic Server - Unrecognized option: -jrockit

Hi,
Im getting the error "Unrecognized option: -jrockit" when I try to start the Web Logic Server as is showed below:
D:\Oracle\Middleware\user_projects\domains\base_domain\bin>startWebLogic.cmd
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
I already installed the JDK 7 64 (jdk-7u2-windows-x64) and use the generic file to install the Web Logic Server (wls1035_generic)
I got the files from here:
JDK >> http://www.oracle.com/technetwork/java/javase/downloads/jdk-7u2-download-1377129.html
Web Logic >> http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Any help I will appreciate.
Thank You,
Raul.

Note that you are using the HotSpot JDK. The option -jrockit is only valid if you are using JRockit.
When you open setDomainEnv.cmd you see something like:
if "%JAVA_VENDOR%"=="Oracle" (
     set JAVA_HOME=%BEA_JAVA_HOME%
) else (
     if "%JAVA_VENDOR%"=="Sun" (
          set JAVA_HOME=%SUN_JAVA_HOME%
     ) else (
          set JAVA_VENDOR=Oracle
          set JAVA_HOME=C:\bea\jrockit_160_29_D1.2.0-10
)which selects a certain JDK based on the set JAVA_VENDOR property.
You add the property JAVA_VENDOR above the first if statement, for example,
set SUN_JAVA_HOME=
set JAVA_VENDOR=Sun
if "%JAVA_VENDOR%"=="Oracle" (...)Also see if the SUN_JAVA_HOME property is set to the correct directory.
technical session - http://middlewaremagic.com/weblogic/?p=7831

Unrecognized option: -jrockit Could not create the Java virtual machine.

Hi All,
I hv running 64bit Linux RedHat 5 , having Peopletools 8.49.19 installed jdk 1.5. weblogic 9.2 .. Installation of Weblogic and PIA done completely without any error .. but when i m gonna start ( ./startPIA ) it gives an error ..
Attempting to start WebLogic Server PIA
No activity will be logged to this window.
Server activity will be logged to /....../pt849/webserv/peoplesoft/servers/PIA/logs/PIA_*
PID for WebLogic Server PIA is: 5162
PIA_stderr.log report
Unrecognized option: -jrockit
Could not create the Java virtual machine.
can you please guide the solution that can help me to resolve this error ..
Thanx ..

Configuring Domains to Use the Latest Version of JRockit
If you are using the JRockit SDK, after you install an upgrade patch or run an Upgrade installer, Oracle recommends that you upgrade your domains to use the latest production version of the JRockit SDK. Although the latest version of the JRockit SDK is installed by the upgrade patch or upgrade installer, your domains are not automatically configured to use it.
To configure your domains to use the latest production version of the JRockit SDK, edit the following file:
For Windows:
MW_HOME\domain_location\domains\domain_name\bin\setDomainEnv.cmd
For UNIX:
MW_HOME/domain_location/domains/domain_name/bin/setDomainEnv.sh
Replace all occurrences of the existing JRockit version with the latest production version of the JRockit SDK.
For example, if you are upgrading from WebLogic Server 10.3.2 to WebLogic Server 10.3.3, replace
jrockit_160_14_R27.6.5-32
with
jrockit_160_20_D1.0.1-2119
You can determine the JRockit SDK version number to use for your WebLogic Server version by looking at the JRockit directory name in MW_HOME. The number to use is identical to the directory name.

Unable to boot weblogic webserver, Unrecognized option: -jrockit

Hello Experts,
I am configuring first webserver domain in newly installed Peopletools 8.51 and FSCM 9.1 environment.
Below are the details --
Server -- Windows Server 2008R2 (64bit)
Weblogic -- 10.3.6 (64 bit)
JDK -- jdk1.7.0.21 (64 bit)
While installing I took care of spaces and everything and now every variable is pointing to right direction but when I try to start the weblogic domain I get the following error --
C:\FSCNFG\webserv\FSCNFG\bin>set JAVA_HOME=C:\Java\jdk1.7.0_21
C:\FSCNFG\webserv\FSCNFG\bin>set PATH=%JAVA_HOME%/bin;%PATH%
C:\FSCNFG\webserv\FSCNFG\bin>set USER_MEM_ARGS=-Xms32m -Xmx200m -XX:MaxPermSize=350m
C:\FSCNFG\webserv\FSCNFG\bin>startPIA.cmd
Attempting to start WebLogic Server 'PIA'
starting weblogic with Java version:
java version "1.7.0_21"
Java(TM) SE Runtime Environment (build 1.7.0_21-b11)
Java HotSpot(TM) 64-Bit Server VM (build 23.21-b01, mixed mode)
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Djava.util.logging.config.file=C:\FSCNFG\webserv\FSCNFG\
piaconfig\properties\logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=C:\FSCNFG\webserv\FSCNFG\piaconf
ig\properties\psvault -Djavax.net.ssl.trustStore="C:/FSCNFG\webserv\FSCNFG\piaconfig\keystore\pskey" -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=C:\Oracle\MIDDLE~1\
WLSERV~1.3\server\lib\weblogic.policy -Dssl.debug=false -Dps_home="C:/FSCNFG" weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
WebLogic is no longer running.
I tried google it but there is no resolution found on this one.
Appreciate your help in this regard.
Regards,
Rahul

I am able to boot the app server by changing in the configuration file -->setENV.cmd.
I put -server instead of -jrockit, i don't know why it is pointing to -jrockit.
Below is the value that I put -->
SET JAVA_OPTIONS_WIN=-server -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:MaxPermSize=128m
in place of below value-->
SET JAVA_OPTIONS_WIN=-jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform
I am still not able to check the status of the server and shut it down properly.
Any suggestions ?
Regards,
Rahul

Unrecognized option: -jrockit (weblogic)

after the jdk upgrade 1.6.20 to 1.6.35 version while starting the admin server getting unrecognized option: -jrockit.
Please help me on this.

Ok, it seems that you have used Hot Spot JDK, instead of Jrockit. Please make sure that you have downloaded the correct package for Jrockit.
[EDIT:
JRockit download page -> JRockit Archive Downloads.
Note -> For the latest version of Oracle JRockit 6 visit My Oracle Support
/END EDIT]
Regards,
Mohab

Unrecognized option : jrockit

Hi All,
After the upgrade of jdk 1.6.20 to 1.6.35 version, getting unrecognized option jrockit error while starting the admin server.
Please help me on this.
Thanks,
Varaprasad

Have you altered in any way your startWebLogic.sh, commEnv.sh (either one) or setDomainEnv.sh scripts? We had issues with customizations previously made that prevented the scripts from auto-detecting the JVM and choosing appropriate flags.
Another option is to forcefully set JAVA_VENDOR=Sun and export JAVA_VENDOR at the start of your startWebLogic.sh or setDomainEnv.sh scripts, to override the automatic JVM settings. You may then need to additionally set memory settings however.

Oracle does not start

Hi,
I have installed oracle 11g r1 on centos. When the pc is connected to network, then I have no problem to spart oracle, else the oracle does not starts.
What can I do to start oracle with or without internet connection.
On windows I used a loopback adapter. Is here any method?
Thank you

Hello,
ORA-12157: TNS:internal network communication errorThis Note of My Oracle Support may give you some solution:
Local Connections Are Not Working ORA-12157 "TNS:internal network communication error" [ID 399342.1]Is the Loopback Interface well configured ?
http://www.informit.com/articles/article.aspx?p=25845
From the below documentation:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#BABFHCJG
"+When you run the ping command on the computer itself, the ping command should return the IP address of the computer.+"
Hope this help.
Best regards,
Jean-Valentin

Oracle 10g not starting after upgarde

Hi,
   Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
Description:
The OracleDEV102iSQL*Plus service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Cheers
Murali

Hi,
I cannot explain what went wrong.
The error indicate that the upgrade is not finished or an error happened during the upgrade.
Please, review the alert log and the upgrade logs.
There are some possibilities:
- First one is to finish the upgrade to Oracle 10.2 manually. Please, check the Metalink notes:
Note 316889.1 - Complete checklist for manual upgrades to 10gR2
    Note:420146.1 - What is the Best Way to Upgrade to 10g?
- Second option is to restore the database to a point before the upgrade. In this case, you have to use the Oracle 9.2 software as well and need to restart the upgrade from the beginning.

Oracle 10g XE installation problem on Ubuntu Linux, Oracle will not start

Hi,
After installing the pakages the error is when I call sqlplus and login as SYS :-
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
What I have done:-
My system is 64 bit AMD.
I installed .deb package on Ubuntu 9.04 server. I installed the following packages.
1.     ibc6-i386
2.     libaio_0.3.104-1_i386.deb
3.     bc
4.     oracle-xe-universal_10.2.0.1-1.1_i386.deb.
The Oracle processes do not start after running /etc/init.d/oracle-xe start.
I can tnsping from the local machine.
dpkg -l |grep libaio gives the following:
ii libaio1 0.3.107-3ubuntu1 Linux kernel AIO access library - shared lib

I have been running XE on 9.04 (32bit on my laptop - 64bit on my workstation) and both works fine. I had no problem installing. I followed the directions in documents I found on Ubuntu forums and also google. The document I used to install on 64bit was from http://littlebrain.org
I remember using
dpkg -i --force-architecture libaio1_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio-dev_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio1-dbg_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture oracle-xe_10.2.0.1-1.0_i386.deb
and then I used the ./oracle-xe configure as root, the installation was ok - and I have even updated the APEX version to 3.2.1 on the XE installation running on my 64bit Ubuntu 9.04
hope this proves useful
R/ Zafer

Oracle does not start automatically ORA-01031: insufficient privileges

Hi,
OS WS2008R2.
ORACLE 11gR2.
Oracle Instance does not start with oracle services but if i stop and restart the services it comes up clean.
Moreover if i change service ownership to Domain\Administrator it again works well.
Checked registery and all ok. No error in alert.log. Only clue found in Oradim.log.
ORADIM.LOG....
C:\Oracle\Ora11g\bin\oradim.exe -startup -sid ptdb -usrpwd * -log oradim.log -nocheck 0
Thu Nov 15 15:16:15 2012
ORA-01031: insufficient privileges
Please help
Thanks

1- startup type- Auto
2- Group to user- ORA_DBA
3 - you can check log on tab in the service properties and set the username and password who responsible about this services
As i already stated 3 works. but i want it to work under Local System and not under any user.
Thanks

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Oracle Essbase not starting up

Hi,
We are having issues with oracle essbase server in our oracle Hyperion planning system. The ./opmncl startall process gives below error. checked OPMN log and it says, JVM initialization and singleserver signon are succesfull. However, i see errors in the leasemanager_essbase log. Not sure what this log contains. thanks for help
./opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=bmaps-ess01:6712
0 of 1 processes started.
ias-instance id=EPM_ess01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
EssbaseCluster-1/EssbaseAgent/AGENT/
Error
--> Process (index=0,uid=0,pid=0)
Service fail over start failure
Log:
none
--> Process (index=1,uid=2078161822,pid=22635)
failed to start a managed process after the maximum retry limit
Log:
/hyperion/Oracle/Middleware/user_projects/ess01/diagnostics/logs/OPMN/opmn/c onsole~EssbaseCluster-1~EssbaseAgent~AGENT~1.log
[hyperionadmin@BMAPS-ESS01 bin]$ ./opmnctl status
Processes in Instance: EPM_ess01
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
EssbaseCluster-1 | EssbaseAgent | N/A | Down
The lease manager log
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-41] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Odbc Driver [DataDirect 6.0 Oracle Wire Protocol]
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-40] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Host [bmaps-db01.ocfo.dc.gov] and port [1521]
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-42] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] Service Name [BMAPSSNP.OCFO.DC.GOV]
[2012-10-05T11:23:56.517-15:23] [ESSBASE0] [LM-44] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:768294784] User [HSS]
[2012-10-05T11:23:57.126-15:23] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:23:57.128-15:23] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:23:59.133-15:23] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:23:59.134-15:23] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:01.140-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:01.141-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:03.146-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:03.147-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:05.152-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:05.153-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:07.158-15:24] [ESSBASE0] [LM-9] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-9] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number.].
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-1] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Failed to acquire the lease after [6] consecutive attempts.
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-16] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Lease is being surrendered.
[2012-10-05T11:24:07.160-15:24] [ESSBASE0] [LM-11] [NOTIFICATION] [16][] [ecid:1349450636674,0] [tid:1087072576] Preparing to shutdown abort.
[2012-10-05T11:24:09.161-15:24] [ESSBASE0] [LM-12] [ERROR] [32][] [ecid:1349450636674,0] [tid:1087072576] Terminating the process.

Hi,
Is your Database started properly?
Since it seems that EPM components are not able to communicate with the Database.
You can use the following steps to start Database [if Oracle]-
1. START TNSLISTNER FIRST      --- cd <bin folder for the Oracle Database> AND THEN ./lsnrctl start
2. START EMCTL Database        --- cd <bin folder for the Oracle Database> AND THEN ./emctl start dbconsole
8. START DATABASE              --- cd <bin folder for the Oracle Database> AND THEN ./sqlplus
9. Log on to                --- https://<IP address for Database server>:1158/em and click on startup and provide the necessary detailsFollow the steps to start the database if database not starting properly
Thanks,
HyperEPM

Oracle Database Not Starting Up Properly

On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. I kinda figured that I wouldn't run into the exact same issue on Oracle VM. I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still here. I didn't find anything in this forum about the database not starting up, so I'm wondering if others are running into the same problem and how to resolve the issue. Thanks a bunch for your help.

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Oracle Service not starting on Win 7

Hi,
Ive just installed Oracle 11g (11.2.0) on my Win 7 home edition. All the oracle services except 'OracleServiceORCL' have started. The below error is recorded in Windows Event Viewer. Error 1067 pop up comes after unsuccessful startup attempt is done.
Faulting application name: ORACLE.EXE, version: 11.2.0.1, time stamp: 0x4bb1e12b
Faulting module name: dbghelp.dll_unloaded, version: 0.0.0.0, time stamp: 0x41e594d4
Exception code: 0xc0000005
Fault offset: 0x000000000c795f4f
Faulting process id: 0x1f94
Faulting application start time: 0x01cda467aa4166fc
Faulting application path: c:\app\jsr\product\11.2.0\dbhome_1\bin\ORACLE.EXE
Faulting module path: dbghelp.dll
Report Id: e888bd29-105a-11e2-9481-8e2ecabfd045
Please can someone assist me on how can I get the Service up and running.
Thanks in advance.

Hi All,
I Have done a fresh installation of Oracle 11g database on my PC. Once the installation got over, Oracle services were started, and I was able to use the database as normal.
Now after rebooting the PC, when I again restarted the Services, I am once again getting the below error on starting OracleService:-
Error 1067: The process terminated unexpectedly.
Error from Windows Event Viewer:-
Faulting application name: ORACLE.EXE, version: 11.2.0.1, time stamp: 0x4bb1e12b
Faulting module name: dbghelp.dll_unloaded, version: 0.0.0.0, time stamp: 0x41e594d4
Exception code: 0xc0000005
Fault offset: 0x000000000c7a5f4f
Faulting process id: 0x23e4
Faulting application start time: 0x01cdb4e47f58e263
Faulting application path: c:\app\jsr\product\11.2.0\dbhome_1\bin\ORACLE.EXE
Faulting module path: dbghelp.dll
Report Id: bde4476f-20d7-11e2-a6ec-e1b45921825a
I have download from the below link for my 64-bit Windows Home edition. I have installed it many times since this version was released, but not sure why this Erro 1067 comes up during past few months onwards.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Please can someone assist me to resolve this issue.
Thanks in advance.
Edited by: Sandyboy036 on Oct 28, 2012 4:11 PM

Oracle is not starting (ORA-27102: out of memory)

Hi All,
We have installed successfuly SAP Netweaver EHP1(SR1) (ABAP and Java) with SUNOS & Oracle10 on the same server.
After installation we have stopped the java instance and tried to start but the database is not starting and it is showing the error
SQL> startup
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Then we have added project in /etc/project
NWJ:500:SAP System NWJ:nwjadm,oranwj::process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-ids=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)
but it doesn't resolve the issue.
Even we have stopped the Abap instance including database but no use.
Can any one provide the soluion ASAP.
Regards,
Venu

Hello,
I've hit this ORA-27102 several times when installing on Solaris 10. The problem was that SAPINST (which runs as root) runs its child processes under the root project, even though they have user ID ora<sid> or <sid>adm. Because the root project often has shared memory limited to 2 GB, Oracle fails with ORA-27102 if it needs more than 2 GB.
I'm not quite sure that the above problem corrseponds with yours though. Is SAPINST finished and are you logged in as ora<sid> or <sid>adm and running SQLPLUS manually? If so, make sure that you are indeed running in the correct project. Commands that can help:
id -p
ps -e -o pid,comm,project | grep sqlplus
Regards,
Mark

Oracle SOA not starting Unrecognized option: -jrockit

Similar Messages

Maybe you are looking for