Oracle sql developer ....Debugging problem even with the proper rights

Hi all,sorry for raising this question in this forum.I dont see SQL Developer forum anywhere.
I am trying to debug my pl-sql procedure but unable to do it.I have been given all the debugging rights by the DBA (that is what he tells me ).
I do get the bug icon ,and I do click a break point ,but after clicking the bug button
I just get this message in the Debugging-log panel
Connecting to the database ahdb_t5.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '10.2.46.58', '1859' )
Please help
Thx

This is the message I get once I click the debug button (after few seconds)
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '10.2.46.58', '1957' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1

Similar Messages

Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?

I'm new to Oracle. I have installed Oracle SQL Developer 3.0.04 and Java 1.7. When I run Oracle SQL Developer, I will get the window Running this product is supported with minimum Java version of 1.6.0_04 and a maximum version less than 1.7. This product will not be supported....
Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?
I have already downloaded Java 1.6 but don't know whether I need to uninstall Java 1.7 first. If don't need to uninstall Java 1.7, how can I set Oracle SQL Developer to run with Java 1.6?
Thanks for any help.
Edited by: 881656 on Aug 25, 2011 11:22 AM

Hi,
One prior post discussing the use of Java 7 is:
SQL Developer 3.0 and Java SE 7?
There is no need to uninstall any Java version (except if you have disk space constraints) and no problem switching between Java versions. This may be controlled in the sqldeveloper.conf file in your ...\sqldeveloper\sqldeveloper\bin directory via the SetJavaHome line. For example:
#SetJavaHome ../../jdk
SetJavaHome C:/Program Files/Java/jdk1.6.0_26
#SetJavaHome C:/Program Files/Java/jdk1.7.0Regards,
Gary Graham
SQL Developer Team

How to solve Oracle SQL Developer connection problem ?

Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?

user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck

BUG in Oracle SQL Developer 3.0.04 on the "generating DLL" with comments?

I'm newbie on oracle, but I think that I found out a bug in Oracle SQL Developer version 3.0.04 on the "generating DLL" tool using "comments".
I will describe the steps that I gave:
I created a view, but after I test it I had to change my “where” condition, so I comment the old code and then I wrote the new “where” condition below. After I done that I tried to look at the sql code of my view using “generating DLL” tool, but oracle sql developer only shown me half of the code, a lot of code were missing. Then I began with some test trying to understand what happen and I notice that if I put an invalid sql code in my comment the generating DLL start working with no problems, for example(pseudo-code):
(COMMENT WITH VALID SQL CODE the "Generating SQL" don't work:)
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
SELECT column1, column2
FROM table1
INNER JOIN
(SELECT
FROM table2
INNER JOIN .....
INNER JOIN ....
--where time_stamp = (select max(time_stamp) from .....)
WHERE time_stamp >= TRUNC(sysdate)
) t1 ON t1.ID = ....
AND ..... >= TRUNC(sysdate)
ORDER BY ....
Generating DLL returns this(when the error occurs):
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
(COMMENT WITH VALID SQL CODE the "Generating SQL" work with no problems:)
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
SELECT column1, column2
FROM table1
INNER JOIN
(SELECT
FROM table2
INNER JOIN .....
INNER JOIN ....
--where
WHERE time_stamp >= TRUNC(sysdate)
) t1 ON t1.ID = ....
AND ..... >= TRUNC(sysdate)
ORDER BY ....
I believe that "Generating DLL" tool have some problem with the comments, I also used /*...*/ to comment but the problem is still active.
I notice as well that if I started to add some more comments along the code, the conditions migth change, so I think the problem is related with "comments" code.
Would you mind telling me if this is a real bug or if I'm doing anything wrong.
Thank you in advance,
Rodrigo Campos
Edited by: 894886 on 3/Nov/2011 5:29

Hi Rodrigo,
Thank you for reporting this. The only bug I see currently logged on a comment affecting the generated View DDL involves ending the last line of the definition with a comment, which treats the ending semi-colon (even if on a different line) as part of the comment. That is actually related to a low-priority bug against an Oracle database API.
Unfortunately, your pseudo-code is a bit complex. Trying a few quick, simpler tests against the standard HR schema did not reproduce the issue. I tried INNER JOIN, and nested SELECTs. It would help greatly if you could provide a test case compilable against one of the standard schema, like HR or SCOTT.
Regards,
Gary
SQL Developer Team

Oracle sql developer downlaod problem

hi
i put my oracle sql in C drive,but when i open it ,it gives me error like :"unable to find main class.Class specified is :oracle/ide/boot/Launcher
can anybody has solution
thanks a lot in advance

I have the same issue...
I've just downloaded
Oracle SQL Developer 2.1 Patch 1 (2.1.1.64.45) Oracle SQL Developer for 32-bit Windows (This zip file includes the JDK1.6._11)
I extract it straight to the c:\ drive making sure I select "Keep folder structure", double click the sqldeveloper.exe executable and I get
"unable to find main class.Class specified is :oracle/ide/boot/Launcher"
I noticed I have a directory and an entry in my environment path of :-
C:\jdk\bin
which holds a JDK v5.0 in it (don't know why it's there, I didn't build the machine).
Could this be a reason for my issues?
Gus..

Oracle/ SQL Developer connection problem.

I have installed Oracle 11 g and SQL Developer, When I open SQL Developer and try to make a new connection ( I name the connection, put a user name in, put my password in), I click on "Test" and I get this error:
Status: Failure - Test failed: Listener refused the connection with the followong error:ORA-12505, TNS: listener does not currently know of SID given in connect descriptor The connection descroptor used by the client was:localhost:1521:ex
Can anyone explain this to me and help me resolve this issue I am having?
Thank you in advance for your help
-steve
p.s. I have also tried the user name: Scott and Password: Tiger

Windows 7 Home ... will have challenges at some point, as Oracle may not be completely compatible with Windows 7.
Aside from that, you may find firewall issues even if you are on the same machine, since the default connection from SQLDeveloper is to use the network (even loopback).
First step is to verify that the database and listener are running and that the database is registered to the listener. TO do that, drop into command line and issue:
1) Listener
lsnrctl statuswhich will give one of two results, if properly installed. First - listener is down
C:\temp>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-FEB-2010 20:48
:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=FCC003L)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   32-bit Windows Error: 61: Unknown errorIf the above is displayed, check the Service applet (Control Panel -> Admin Tools > Service) to ensure serivce is up, or enter "lsnrctl start", in which case the status shoud show
C:\temp>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-FEB-2010 20:46
:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date                05-FEB-2010 14:42:10
Uptime                    2 days 6 hr. 4 min. 30 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   C:\oracle\app\oracle\product\10.2.0\server\network\adm
in\listener.ora
Listener Log File         C:\oracle\app\oracle\product\10.2.0\server\network\log
\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FCC003L)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\temp>2) After the service is verified up, make sure the database is up
sqlplus / as sysdbawhich should respond with something like
C:\temp>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Feb 7 20:43:12 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL>if it gives something like
C:\temp>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Feb 7 20:44:49 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter errorthe pull up the Control Panel, Admnistration Tools, Services and start the database. Then recheck the listener and it shoudl show some additional services such as
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "TEST" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfullyIn the above, remember the "xe" from 'Service "xe" has 1 instance(s).'. I expect to see something about that in the TNSNAMES.ORA file in your ORACLE_HOME\network\admin directory. That file should have an entry like
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = FCC003L)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
)and you will note the XE on the left side of the equal sign (which is a network alias), and one XE in the (SERVICE_NAME = XE) line. On YOUR system, the XE should be replaced by whatever you called your database (often 'orcl'). REMEMBER THIS ALIAS;-) and also make note of the host that your entry uses. If your host name changes because of DHCP, you're hooped (for a while).
If the database is registered (shows up in the list), the next step is to make sure a userid is available. You could use 'system' (try to avoid using SYS since it is the master userid and if you mess that up, you mess up all your homework. In a production encvironment, every access to SYS will be audited.
So, let's create a userid called me with (in 11g case sensitive) password 'myself'. Make sure that user is allow to log in (create session) and create a table.
C:\temp>sqlplus system/oracle
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Feb 7 20:54:38 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> create user me identified by myself;
User created.
SQL> rem to show you how to change password ...
SQL> alter user me identified by myself account unlock;
User altered.
SQL> grant create session, create table to me;
Grant succeeded.
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Productionand now see whether we can log in using the same 'network' technique we will later use with SQLDeveloper.
Do you remember the XE discussion above? Replace XE with the one on the left of the equal sign - the system looks that up to find which service it wants to access.
C:\temp>sqlplus me/myself@XE
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Feb 7 20:58:26 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select * from dual;
D
X
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - ProductionIf the above worked, you should have no problem accessing the system using SQLDeveloper. You simply use the HOST, the PORT and the SID (alias) or service from the "lsnrctl status" output in the SQLDeveloper fields.
If it did not work, try dropping the "@XE" to see whether you can get in (using the bequeath connection) which is useful for troubleshooting but will not help with the traditional SQLDeveloper connection. If you get in without the @XE (or whatever your alias is) but not with it, most likely either your listener is not up or your firewall is blocking the access to the listener.

EA2--Oracle SQL Developer 1.5 issue with open,function, procedurres.

Hi Friends,
After install SQL Developer 1.5, I can connection to database and see table object, view. However, I am not able to view codes of package, procedure and function and got an error message :
an error was encountered performing the requested operation: closed Connection Vendor code 17008 when I try to explorer folder of package, function and procedure.
Any suggestion for this issue?
Thanks,
JImmy

I am on version 1.2.1 and I am getting this error message more and more when compiling packages. I am tired of restarting SQL developer.

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

Oracle SQL Developer O/P and Toad O/P is Different for Same QUERY.

Hi,
can any one calrify me why i'm getting different result when i run the same QUERY in Oracle Developer and TOAD.
When i Ran a Query in TOAD i could see Null&Data in a column called Customer_Category but when i Ran the same Query in Oracle SQL Developer i'm getting all Null N i couldnt see any data in the column.
i have not performed any DDL r DML statement, just i got the Query and i Ran it in TOAD & Oracle SQL Developer.
I found that the OUT PUT is different for perticular column.
Thanks in Advance....

> I found that the OUT PUT is different for perticular column.
The RENDERING of data from Oracle (or any other server such as a POP3 server, web server, etc) IS DONE BY THE CLIENT.
So to repeat - RENDERING IS DONE BY THE CLIENT.
If one client selects to display the output received from the server differently than another client, it is a CLIENT ISSUE.
It is not a server issue. It is not a SQL issue. It is not a PL/SQL issue.
In other words, wrong forum for this question. You have a pure client side rendering problem which has absolutely nothing to do with SQL and/or PL/SQL.

Oracle SQL Developer Data Modeler start up error

Hi All,
I just downloaded Oracle SQL Developer Data Modeler (2.0.0.57.0) [Released 1 July 2009] by selecting the option "Oracle SQL Developer Data Modeler for Windows (This zip file includes the JRE)"
After I installed the same and tried to run it by clicking datamodeler.exe, I get the following error message
"unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll"
On the same machine I can successfuly run the Oracle SQL Develper with no errors. My machine is having Windows XP Professional SP3.
Any ideas? If there was a problem with Java, than the Oracle SQL Developer should also not run. But as stated it runs with out any error but the Oracle SQL Developer Data Modeler gives the above error.
Regards,
JAA149

1 - The above problem has nothing to do with the memmory. I tried on a 400 MB RAM, 900 MB RAM, 1.5 MB RAM & 2 MB RAM with the same arror.
"unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll"
http://i30.tinypic.com/9vkwf6.jpg
2 - There are two "datamodeler.exe: files
One is at D:\datamodeler\datamodeler.exe
2nd is at D:\datamodeler\bin\datamodeler.exe
The same error occurs with both the files.
3 - The Oracle SQL Developer Data Modeler version is "Oracle SQL Developer Data Modeler (2.0.0.57.0) [Released 1 July 2009]" and the file I downloaded is "Oracle SQL Developer Data Modeler for Windows (This zip file includes the JRE) - (57M)"
If I look in "D:\datamodeler\jdk\jre\README.txt" I find
"Java(TM) Platform, Standard Edition Runtime Environment Version 6"
If I run "D:\datamodeler\jdk\jre\bin\javacpl.exe" I get
http://i30.tinypic.com/mt8ocn.jpg
If I run "D:\datamodeler\jdk\jre\bin\jureg.exe" I get
http://i28.tinypic.com/30boiyo.jpg
If i check at the control panle add/remove program
http://i30.tinypic.com/1428tba.jpg
If I go to "http://www.java.com/en/download/manual.jsp" and download "jre-6u16-windows-i586-s.exe" and run it.
If I go to "C:\Program Files\Java\jre6" I find the same files as in "D:\datamodeler\jdk\jre"
I am able to run Oracle SQL Developer with out any kind of error let alone the above one. But with Oracle SQL Developer Data Modeler I get the above mentioned error no matter what I try.
As the error states "unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll". The file "jvm.dll" is located at two places. One at "D:\datamodeler\jdk\jre\bin\client\jvm.dll" and the second at "D:\datamodeler\jdk\jre\bin\server\jvm.dll"
A similiar problem occurs with JDeveloper with the fllowing solution
http://forums.oracle.com/forums/thread.jspa?threadID=506339&start=0&tstart=0
Which states the following
"hello!
in the problem with JDeveloper i have a solution. The jdk have a file jvm.dll in the path: jdk/jre/bin/client/jvm.dll this is the problem ... now in the path:jdk/jre/bin/client/ojvm has a file with the same name if you copy and paste this file to the another path, now its works fine your Jdeveloper.
Jdeveloper use two files to jvm.dll to work one in the folder /client and other in /server copy the same file to the two locations for precaution
for me work fine thanks..."
I tried to do the same (Copy from client folder to server folder)
D:\datamodeler\jdk\jre\bin\client\jvm.dll
COPIED THIS FILE TO
D:\datamodeler\jdk\jre\bin\server\jvm.dll
Nada. So I reversed it (copied from server folder to client folder)
D:\datamodeler\jdk\jre\bin\server\jvm.dll
COPIED THIS FILE TO
D:\datamodeler\jdk\jre\bin\client\jvm.dll
Does not work. So I tried another solution stated at the same forum entry
"Well,
i solved the problem by this way :
<SQLDEVELOPER>/jdev/bin/ide.conf
In this file, change this line :
AddVMOption -Xmx512M
by
AddVMOption -Xmx256M
Now, the executable is lauching correctly. No more errors with Java Virtual Machine.
But is it a good thing to solve it like that ?"
But the ide.conf file is only at "D:\sqldeveloper\ide\bin\ide.conf" which is for the SQL Developer and not the SQl Developer Data Modeler
Correct me if I am wrong but
JRE = Java Run Time Envoirment
JDK = Java Development Kit
And Oracle SQL Developer Data Modeler needs JRE and not JDK. In any case I download JDK
jdk-6u14-javafx-1_2-windows-i586.exe (121,306 KB) and installed it but no succcess.
I tried every thing except completely re-install my whole PC.
Any help will be much appreciated.
Cordially,
Jawad

SQL Developer install problems for Windows 7 Home edition

Hi there,
I understand Windows 7 64-bit is not supported for oracle 11gR2 but I installed it anyway.
This is not my problem.
I am trying to install SQL Developer and am getting this error when I click on the set up:
Unable to launch the Java Virtual machine, located at path:
C:\Program Files(x86)Java\jdk1.6.0_21\bin\msvcr71.dll
When I check the version of my java it is correctly displaying 1.6.0_21 for my 64 bit.
I read that you need the 32 bit one installed as well and I do. In my Program Files there is a java and a \jdk1.6.0_21 folder. In the bin directory it does not have this .dll:
msvcr71.dll
Is that the problem, because i have heard of other people getting sql developer working on their Windows 7 home laptops but they are old posts and I'm not getting any reply.
I also changed the Environmental variable for the path, such as:
C:\Program Files (x86)\Java\jdk1.6.0_21
C:\Program Files (x86)\Java\jdk1.6.0_21\bin
C:\Program Files (x86)\Java\jdk1.6.0_21 /bin
and none of the 3 above worked for me either.
Any suggestions are appreciated!

I unzipped the sql developer download to C:\Windows and it unzipped fine. I went into my folder of sql developer, double clicked the sql developer.exe and it asked for the path for java. I clicked Browse and the default was C:\Program Files(x86)\Java\jdk1.6.0_21\bin so I chose the java from this folder. It accepted the argument, tried to start sql developer, and came up with the same error, so something is still not right that I am not understanding??

How to create databse in oracle sql developer

Hi am using oracle sql developer but while connecting to the database i am getting error of network adapter
if any buddy has a solution then fill free to post
Thanx and Regards
Umesh

Can you be a little more specific with the error? The "network adapter" errors I've seen myself have been because SqlDeveloper can't connect to the database, either because the wrong host/port was given, or because a firewall was blocking the port.

IO Error 17002 in Oracle SQL Developer

Hi,
I am trying to connect to the test database using the Oracle SQL developer but I am getting the below error
IO Error: The network adapter could not establish the connection vendor code 17002
I used to connect to the test server fine 2 weeks ago (the test server is on another network and i connect to it using the VPN).
I am able to connect the the Production Database through the Oracle SQL developer (without VPN) but when I try to connect to the test i am getting the error.
I have checked the service name and ports and everything is fine and. So what could be the problem?

I am not able to connect through sql/plus as well
However, I am able to ping the test server

Oracle Sql Developer

i, I’m using Oracle Sql Developer write some queries in the PoepleSoft data base, and I need to count number of guests ( Field name: NA_GUEST_USER_SEEL) attended in the event and extracts from the record( table name: NA_CR_TEST_SEEL ).
Also, please suggest me a query to write that can pull the data from the metrics. All guests are brought in by each seater. The fields are as follows...
Table name: NA_CR_TEST_SEEL
Seater’s filed name: NA_RAE_SEATING_CHR
Guest Field name: NA_GUEST_USER_SEEL
PeopelSoft Campus Solutions, CRM
An early response would help me to take it forward the work
Thanks
Reddy,

Hi, I would like to send an attachement that has screens of PeopleSoft Campus Solutions CRM for a). Participants for an Event that has the fileds like Seating, Guest User
and other screen b). Performance Metrics screen
1. We need to find out the ‘Total Guests registered for the Events.
2. Total Guests registered for Roll-up
please assit me how I can send you the document that I'm facing the problem.

Using bind variables in Oracle SQL developer

Hi all,
i am using Oracle SQL developer. i want to use the bind variable in my sql.
variable myid number :=1;
select * from mds_3618_request where id = :myid;
but i am getting the below error.
Error starting at line 2 in command:
select * from mds_3618_request where id = :myid
Error report:
SQL Error: Missing IN or OUT parameter at index:: 1
Does Oracle SQL developer support bind variables in the SQL statements?
thanks in Advance
Vali Shaik

You are probable going to get a quicker answer on this forum : SQL Developer
-- Andy

Oracle sql developer ....Debugging problem even with the proper rights

Similar Messages

Maybe you are looking for