Oracle Tables used by Collaboration Rooms

I want to create MS Access reports that show the member lists for collaboration rooms.
We have converted to Active Directory so that data is no longer in the ume_strings table.
What Oracle database tables can I find information for the collaboration rooms.
I have looked at the .kmc tables, but I do not see any of this information

Hi Al,
To answer the first question: This would have to be done in Java - that's the supported way within the portal.
I understand your restrictions, but there is another reason against using the portal databases tables directly: Their structure is not documented and may change between SPs without further notice (and, in reality, also does). Therefore the approach - just for not being able to develop something - to access the DB directly is all but clean.
If a company is running a portal, it should be able to have access to Java developers creating stuff like this; whether employed developers or freelancers.
Best regards
Detlev

Similar Messages

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

Help Required :Excel Upload Into Oracle Table Using PLSQL Procedure/Package

Please Help , Urgent Help Needed.
Requirement is to Upload Excel file Into Oracle Table Using PLSQL Procedure/Package.
Case's are :
1. Excel File is On Users/ Client PC.
2. Application is on Remote Server(Oracle Forms D2k).
3. User Is Using Application Using Terminal Server LogIn.
4. So If User Will Use to GET_FILE_NAME() function of D2K to Get Excel File , D2k Will Try to pick File from That Remote Server(Bcs User Logind from Terminal Server Option).
5. Cannot Use Util_File Package Or Oracle Directory to Place That File on Server.
6. we are Using Oracle 8.7
So Need Some PL/SQL Package or Fuction/ Procedure to Upload Excel file on User's Pc to Oracle Table.
Please Guide me wd some Code. or with Some Pl/SQL Package, or With SOme Hint. Or any Link ....
Jus help to Sort This Issue ........
you can also write me on :
[email protected], [email protected]

I also Tried to Use This
But How can i Use SQLLDR Command In Stored Procedure.
Well IN SQL*PlUS it is successfull but in Stored Procedure /Package ,PL/SQL does not recognise the OS commands.
So now my Question How can I recognise the SQLLDR Commnad in Stored Procedure.

Help Required:How Upload Excel file Into Oracle Table Using PLSQL Procedure

Please Help , Urgent Help Needed.
Requirement is to Upload Excel file Into Oracle Table Using PLSQL Procedure/Package.
Case's are :
1. Excel File is On Users/ Client PC.
2. Application is on Remote Server(Oracle Forms D2k).
3. User Is Using Application Using Terminal Server LogIn.
4. So If User Will Use to GET_FILE_NAME() function of D2K to Get Excel File , D2k Will Try to pick File from That Remote Server(Bcs User Logind from Terminal Server Option).
5. Cannot Use Util_File Package Or Oracle Directory to Place That File on Server.
6. we are Using Oracle 8.7
So Need Some PL/SQL Package or Fuction/ Procedure to Upload Excel file on User's Pc to Oracle Table.
Please Guide me wd some Code. or with Some Pl/SQL Package, or With SOme Hint. Or any Link ....
Jus help to Sort This Issue ........
you can also write me on :
[email protected], [email protected]

TEXT_IO is a PL/SQL package available only in Forms (you'll want to post in the Forms forum for more information). It is not available in a stored procedure in the database (where the equivalent package is UTL_FILE).
If the Terminal Server machine and the database machine do not have access to the file system on the client machine, no application running on either machine will have access to the file. Barring exceptional setups (like the FTP server on the client machine), your applications are not going to have more access to the client machine than the operating system does.
If you map the client drives from the Terminal Server box, there is the potential for your Forms application to access those files. If you want the files to be accessible to a stored procedure in the database, you'll need to move the files somewhere the database can access them.
Justin

Planning data to Oracle Tables Using ERPi???

Hi All,
We are using a Hyperion V11.1.2 having a scenario like
we want ot load data in to Oracle Tables or GL Balance Tables from Planning Application using ERPi , but we are not loading data directly from GL Balance to Planning using ERPi, so can we load data from Planning to OeBS or Oracle Tables using ERPi???
Are there any special adaptars or special way to load data back to OeBS GL Balance ???
Regarda
Kumar

Hi ram
let me know how can i upload oracle tables to XML
regards
Anand

Can select, but cannot insert into oracle tables using php.

I am having trouble inserting data into a tables in oracle using PHP. I can insert into the tables using baninst1, but nothing else. I can't even insert using the tables' owner. Every time I try I get the ORA-00492 error of table or view does not exist. However, I can run a select statement just fine. So far, baninst1 is the only user that can actually do inserts. I've triple checked all the table grants and everything is fine. Also, I can copy/paste the exact insert statement into SQL*Plus and it works with the correct user. It doesn't have to be baninst1. I've tried everything I can think of. I've tried putting the table name in quotes, adding the schema name to the table, checking public synonyms, but everything appears to be ok. I would greatly appreciate any suggestions others may have.
I'm using PHP 5.2.3 with an oracle 9i DB.

Here is the code that doesn't work. It works only with baninst1, no other username will work and all I do is change the my_username/my_password to something different. This is one example function where I try to do an insert, but it doesn't work on any of the tables I try.
Thanks for looking.
class Oracle {
     private $oracleUser = "my_username";
     private $oraclePassword = "my_password";
     private $oracleDB = "MY_DB";
     private $c = null;
     function Connect() {
          if ( !($this->c = ocilogon( $this->oracleUser, $this->oraclePassword, $this->oracleDB ) ) )
               return false;
          return true;
     function AddNewTest($testName, $course, $section, $term, $maxAttempts, $length, $startDate, $startTime, $endDate, $endTime)
          $result = "";
          if( $this->c == null )
               $this->Connect();
          $splitIndex = strpos($course, " ");
          $subjectCode = substr($course, 0, $splitIndex);
          $courseNumber = substr($course, $splitIndex + 1);
          $insertStatment = "insert into szbtestinfo(szbtestinfo_test_name,
                                                            szbtestinfo_course_numb,
                                                       szbtestinfo_section,
                                                            szbtestinfo_max_attempts,
                                                            szbtestinfo_length_minutes,
                                                            szbtestinfo_start,
                                                            szbtestinfo_end,
                                                            szbtestinfo_id,
                                                            szbtestinfo_subj_code,
                                                            szbtestinfo_eff_term)
                                                            values( '" . $testName .
               "', '" . $courseNumber .
               "', '" . $section .
               "', " . $maxAttempts .
               ", " . $length .
               ", to_date('" . $startDate . " " . $startTime . "', 'MM/DD/YYYY HH24:MI')" .
               ", to_date('" . $endDate . " " . $endTime . "', 'MM/DD/YYYY HH24:MI')" .
               ", szsnexttest.nextval" .
               ", '" . $subjectCode .
               "', '" . $term . "')";
          //return $insertStatment;
          $s = OCIParse($this->c, $insertStatment);
          try
               $result = OCIExecute($s);
          catch(exception $e)
          return $result;
     }

I want to update date field in oracle table using database adaptor

Hi Guys,
I want to update date in oracle table field which is 'DATE' type , but i am getting following error.
Pure SQL Exception.
Pure SQL Execute of update crp3apps.IFACE_SO_DATE_CHANGES set PROCESSED_DATE=? where CTRL_ID=? failed. Caused by java.sql.SQLException: ORA-01830: date format picture ends before converting entire input string
The Pure SQL option is for border use cases only and provides simple yet minimal functionality. Possibly try the "Perform an operation on a table" option instead.
</summary>
</part>
- <part name="detail">
<detail>
ORA-01830: date format picture ends before converting entire input string
</detail>
i am formated the date using following code and assigned to one variable.
ora:formatDate(ora:getCurrentDateTime(),'dd-MMM-yyyy hh:mm:ss ')
this is update query
update crp3apps.IFACE_SO_DATE_CHANGES set PROCESSED_DATE=#date where CTRL_ID=#id
Please provide solution.
regards
janardhan

The thing is that XSLT often doesn't deliver the functionality required when it comes to times.
You suggest appening "Z" to the time but this means that the time is now in UTC time. What if the system from where the date is being converted is running in NZ using local time? Other systems that recieve the date (and correctly handle the time zone) will now have a time that is out by a number of hours.
You often can't ignore the time zone (drop the 'Z') as if you send the time to a system it has to either assume the time is local to it (which may not be the case... the other system coudl be in a different time zone) or assume the time is UTC (I think crossfire does this by default).
Typically can't just append a time zone (e.g. +11:00) either as many places have daylight savings so the value to appended is variable (you then need some way of determining what the value is... either Java Embedding or a Service).
As you mention it does depend on the use case but in many circumstances using Jaba Embedding, not as suggested above but with the appropriate Java.util.Calendar classes, is the best way to handle date and time in BPEL. Even still you need to ascertain the format of times external to the system and ensure you parse them correctly.
ANd even if you do all this you can still run into problems. I've seen a real world example where two systems which both handled time zones correctly and had previously been working together for quite a while, satrted reporting different times. It turns out that only one of them had had the most recent Java Time Zone patches applied and there had been a change in the dates for daylight savings here (Australia). Be warned!

# coming when I select data from oracle table using Native SQL

Hi Gurus,
I am selecting 'First name' from oracle table directly using native sql. I am fetching 65000 records but 10+ records having '#' at the end of firstname. For eg: John#.
But oracle team couldn't find '#' in their table for those records. What could be problem?
or what could be the character in oracle which comes as '#' in abap?
Pls help...
Saj

Thanks for replies.
My DB NLS_PARAMETER is AL32UTF8. I am able to pullout data with older version of ojdbc jar file. So I think there is no issue regarding NLS setting.
So please guide me with proper solution as soon as possible.

Accessing multiple oracle tables using C#

Hi you'll.
I'm a newbie programmer, my first project is to find unmatched records bet two oracle tables.
One requirements of my project is to write in .net platform. I read a lot of good reviews about using odp.net. I haven't work in any oracle related project.
Would somebosy enlighten me with this project. Hopefully with codes or threads. Thanks

If the purpose of your query is to master the fundamentals of using Oracle and .NET, I would recommend visiting the Beginners page on the OTN .NET site:
http://www.oracle.com/technetwork/topics/dotnet/for-beginners/index.html
If you have a couple of days to devote to learning, then read the 2 Day .NET book for a comprehensive overview. If not, then you can read the beginner article and/or review the OBE tutorials to learn how to perform different tasks with Oracle and .NET.

Accessing Oracle Tables using ABAP

Dear All,
We are using SAP ECC 6.0, we need to access some of the tables in oracle system using ABAP program. Is there any wany to access the oracle tables.
Please suggest and do the needful.
Thanks in advance,
Chandra

DECLARE YOUR ORACLE INSTANCE INTO TABLE DBCON
AND USE THE FOLLOWING FM TO ACCESS YOUR DATA
RSDBC_DB_DATA_GET
RSDBC_DB_DSOURCE_CHECK
RSDBC_DB_DSOURCE_CONVERT
RSDBC_DB_DSOURCE_GENERATE
RSDBC_DB_FIELDS_CHECKS
RSDBC_DB_FIELDS_GET
RSDBC_DB_SCHEMAS_GET
RSDBC_DB_TABLES_GET
RSDL_CONNECTION_CHECK
RSDL_DB_GET_ALL_TABLES
RSDL_DB_GET_DATA
RSDL_DB_GET_DATA_BWS
RSDL_DB_RFC_GET
RSDL_TRACEFILE_DISPLAY
RSDS_ACCESS_DB_DATA_UPLOAD
RSDS_ACCESS_DB_DATA_UPLOAD_2
RSDS_ACCESS_DB_FIELDS_GET
RSDS_ACCESS_DB_TABLES_GET
OR WRITE YOUR OWN CODE USING THIS OBJECTS
cl_sql_connection
cl_sql_statement
cl_sql_result_set

Map FLAT file to oracle table using 9.04 version - PLS HELP!!!!

Hello all
I am having a problem with mapping a flat file to oracle table. The validation is successful, when I go to Project/Deployment manager. Try to deploy the mapping itself and the target table. It said succesful, and the last step is another "Deploy", this one is fail. Saying could not locate the file (which is a flat file) , but it is there on the server.
I have read all the help on line and follow what they show me, but still not work
Any ideas? Please provide detail answer if you know it.
Thank in advance

Hallo,
just give a rights on connector
Variant 1
1. connect to user sys
2. grant read,write on directory <connector_name> to <target_schema>;
or
Variant 2
1. as user sys or system give CREATE_ANY_DIRECTORY to <target_schema>
2. manualy make CREATE DIRECTORY <connector_name> as '<full_path_to_directory>';
and enjoy :)
PS: <connector_name> you can take from script CREATE_TABLE wisch in Generation phase was created!
Kirill

Error while loading data oracle table using xslt

Hi
I have an following xml:
<TRAN TRAN_ID = "12" RCODE = "W"> <STATION>1234567</STATION> </TRAN>
I have created the following xslt for the above xml:
<?xml version="1.0"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> <xsl:template match="TRAN"><xsl:value-of select="@TRAN_ID" /> <xsl:value-of select="@RCODE" /> </xsl:template> </xsl:stylesheet>
I am trying to insert data into the table Tran having columns tran_id and rcode in oracle database 11g.
I am getting the following error:
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00210: expected '<' instead of '1'
ORA-06512: at "SYS.DBMS_XMLSTORE", line 78
ORA-06512: at "SYS.DBMS_XMLSTORE", line 88
Can anybody tell me if i am making a mistake in writing the xlst?
Thanks in advance.

Thank you for your reply. Currently i am using the insert using xmltable and it works fine. But i would like to use xsl if the dynamic passing of values is possible. Actually i want to store the xsl in a table and call it when needed to insert data to the database table (MSGS). Could you please give me an example of it?
Here is the table structure i have in database:
Table Name: Tran_data
columns: SEQ NUMBER NOT NULL ,
TRAN_ID VARCHAR2(6) NOT NULL ,
RCODE VARCHAR2(30) NOT NULL ,
TRAN_DT DATE NOT NULL ,
xml_data xmltype
Table Name : Msgs
SEQ NUMBER NOT NULL,
RULE_ID VARCHAR2(200) not null,
MSG_TXT VARCHAR2(2000) NOT NULL,
TRAN_DATA_SEQ NUMBER NOT NULL ,
CREATE_USER VARCHAR2(30) NOT NULL ,
CREATE_DATE DATE NOT NULL ,
COMMENTS VARCHAR2(2000)
In this TRAN_DATA_SEQ is a foreign key and is a mandatory column. I can get the Tran_id and the rcode from xml. but the remaining mandatory columns i need to pass them to the xsl. Below is the xsl. Can you please let me know how to pass value to this the xsl.
[P]
xml:
<RES>
<Status>'PASS'</Status>
<Tran_id>1A</Tran_id>
<Rcode>1BR</Rcode>
<Msg>
<Rule_Id>A<Rule_Id>
<Msg_Text>'CRDT Failed'<Msg_Text>
</Msg>
<Msg>
<Rule_Id>B<Rule_Id>
<Msg_Text>'MAN Failed'<Msg_Text>
</Msg>
</RES>
[P]
I need an xsl for this xml to insert tran_id and rcode in tran_data table along with the xml as xml_data and the msg information in msgs table. The seq of tran_data needs to be inserted into the msgs table. Please let me know how this can be achieved using xsl?
Thanks in advance.

Update oracle table using data through ODBC

Hi,
I want to update tables inside an Oracle 8i database.
The updates depend on data in a mySql database that I want to approach using an ODBC connection.
I cannot figure out what I need to do to select data from an ODBC source from an oracle session.
What do I have to call this external table ...
Edward

The following link may be relevant. Check it out.
http://download-east.oracle.com/docs/cd/A87860_01/doc/server.817/a76960/hs_admin.htm

Store XML data as relational data into Oracle tables using Java and XMLType

I want to store xml data into an Oracle 11g table as relational storage, not as CLOB or Binary storage. Then I should also be able to query and fetch this data from table into an XML file.
Any hint on how to write java code using XMLType to achieve this?
Any help would be appreciated.

Thanks for the explanation. I still have few confusions. I will try to elaborate my requirement with a simple example...
I have the following xsd and xml files. "note" would be the table in database and "to", "from", "heading" and "body" would be the columns of note table. "Tove", "Jan", "Reminder" and "Don't forget me this weekend!" would go as data in one row of note table.
How do I create note table with the xml schema (xsd file)?
Should the note table be of XMLType or the columns?
How do I load the XML data into the columns of note table?
How do I retrieve the row of note table as XML file?
XML Schema:
<?xml version="1.0"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.xxxxx.com"
xmlns="http://www.xxxxx.com"
elementFormDefault="qualified">
<xs:element name="note">
<xs:complexType>
    <xs:sequence>
      <xs:element name="to" type="xs:string"/>
      <xs:element name="from" type="xs:string"/>
      <xs:element name="heading" type="xs:string"/>
      <xs:element name="body" type="xs:string"/>
    </xs:sequence>
</xs:complexType>
</xs:element>
XML Data:
<?xml version="1.0"?>
<note>
<to>Tove</to>
<from>Jan</from>
<heading>Reminder</heading>
<body>Don't forget me this weekend!</body>
</note>

Reconnect opening an Oracle Table using SQL Developer 3.0 in Windows 7.

Downloaded SQL Developer 3.1.07 and placed a copy on both Windows XP Pro. and Windows 7 Pro. No issues using SQL Developer under Windows XP, Oracle 10g client driver. However, under Windows 7 (32-bit or 64-bit PCs), Oracle 10g or 11g client driver, when I click a table name to display the 'Columns, Data, Constraints, ...' fields - I receive a Reconnect message: Your database connection has been reset. Any pending transactions or session state has been lost." I am able to view the Data, Contraints, Grants, ... fields, except for Columns field (no data). Also executing SQL statements to query any of the tables returns expected data. Right-click on database connection shows 'Connect' and 'Reconnect' greyed out, so appears connection exists. So why is the Reconnect message happening? And why can I not see my field definition under Table Columns?

Thanks, I'll survive. Just my luck, the first item I try to anon. debug didn't work! :)
thanks, hopefully this problem will be few and far between

Oracle Tables used by Collaboration Rooms

Similar Messages

Maybe you are looking for