Update oracle table using data through ODBC

Hi,
I want to update tables inside an Oracle 8i database.
The updates depend on data in a mySql database that I want to approach using an ODBC connection.
I cannot figure out what I need to do to select data from an ODBC source from an oracle session.
What do I have to call this external table ...
Edward

The following link may be relevant. Check it out.
http://download-east.oracle.com/docs/cd/A87860_01/doc/server.817/a76960/hs_admin.htm

Similar Messages

How to Update crmd_customer_h TABLE Using CRMV_EVENT Through Funtion Module

Hi
How we can update customer_h table using the CRMV_EVENT Where i implemented logic below in the Funtion Module.
data:     lt_doc_flow          TYPE crmt_doc_flow_wrkt,
          lw_cust_h_com        TYPE crmt_customer_h_com,
          lw_input_field_names TYPE crmt_input_field_names,
          lt_input_field_names TYPE crmt_input_field_names_tab,
          lt_objects_to_save TYPE crmt_object_guid_tab,
          lw_guid TYPE CRMT_OBJECT_GUID.
DATA : lv_process_type TYPE crmt_process_type.
data: wa_doc_flow type CRMT_DOC_FLOW_WRK.
data: wa_customer_h type crmd_customer_h.
* Function module for retriving the Process type.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
    EXPORTING
      iv_orderadm_h_guid     = iv_header_guid
    IMPORTING
      ev_process_type        = lv_process_type
    EXCEPTIONS
      admin_header_not_found = 1
      OTHERS                 = 2.
if lv_process_type eq 'ZG01'.
CALL FUNCTION 'CRM_DOC_FLOW_READ_OB'
EXPORTING
   IV_HEADER_GUID                 = iv_header_guid
IMPORTING
   ET_DOC_FLOW_WRK                = lt_doc_flow.
read table lt_doc_flow with key objtype_a = 'BUS2000116' INTO wa_doc_flow. "gc_object_type-service.
            if sy-subrc eq 0.                    "set flag for service order
            lw_cust_h_com-ref_guid       = wa_doc_flow-objkey_a.
            lw_cust_h_com-ZZTRAIL_FLAG   = 'X'.
             lw_cust_h_com-mode           = 'A'.
            lw_cust_h_com-ref_handle     = '0000000001'.
            lw_guid = wa_doc_flow-objkey_a.
            INSERT lw_guid INTO TABLE lt_objects_to_save.
     endif.
              lw_input_field_names-fieldname = 'REF_GUID'.
            lw_input_field_names-fieldname = 'ZZTRAIL_FLAG'.
          lw_input_field_names-changeable = ' '.
           INSERT lw_input_field_names INTO TABLE lt_input_field_names.
Maintain Customer H
         CALL FUNCTION 'CRM_CUSTOMER_H_MAINTAIN_OW'
              EXPORTING
                is_customer_h_com    = lw_cust_h_com
              CHANGING
                ct_input_field_names = lt_input_field_names
              EXCEPTIONS
                header_change_error = 1
                header_create_error = 2
               error_occurred       = 3.
ENDIF.
*endif.
*Clearing local variables
clear: lv_process_type,
         lw_cust_h_com,
         lw_input_field_names.
*Free internal tables
free: lt_doc_flow,
        lt_input_field_names.

Hi Faisal
I think your not clear with what i am saying anyhow i will again explain you my requirement
As per my requirement
1)in the service order search report i need to add a field called "Has trail order with No Follow up" with values "Yes" & "Blank"
For above Field i added using the structure CRMST_QUERY_SRVO_BTIL and through configuration i am able to display the field in webui as per (Attachement Pic 1)
2)When i search with search criteria as "Has trail order with No Follow up" with "Yes"
Then in result list i need to show the service order those having follow up as trail orders(sales order) only.if for next document trail order having any follow up then those service orders dont want to show in result list.
For above requirement i implemented F.M using CRMV_EVENT & I configured for BUS2000115 And BEFORE_SAVE The Order
The FM Will get trigger when i save the service order and for that service order if create any follow up and try to save the trail order then This FM Will trigger and in this i am doing validations.
3)Add one AET Trail Flag field is added under CUSTOMER_H Table.
4)in the FM I am validating for if the trail order having the preceding document as service order then i need to make flag as "X" For that service order in customer_h
if suppose when i delete trail order from the service order then that flag must need to be "unset" from the CUSTOMER_H.
Why bcoz we are doing above process is do show records in result list based on Flag values
these flag checks are validating in the BADI Which we implemented for search logic.
Please refer below Login for my requirement:-
Proposal to have a custom “flag” field (background at table level,
     crmd_customer_h) linked to service order which gets flagged whenever at
     least one Trial order is created and saved from the Service Order.
The flag value should be cleared when all the trial orders created and
saved as follow up transactions are deleted from the system.
Similarly for Trial Orders will use the same custom “flag” field
     which gets activated when at least one follow up is created and saved from Trial Order.
The flag value should be cleared when all the follow up transactions from
the Trial Order are deleted from the system.
When the above search criteria “Has Trial order with no follow up”
     “is” “Yes” is applied then the logic derives all the service
     orders which satisfy additional search criteria applied in the search and
     for these Service orders checks if the custom flag field is checked to
     derive all Service orders which have Trial order. The custom flag values
     values are derived from crmd_customer_h table in CRM.
4 )Further for all the Trial Orders determined in Step 3
check if the Trial Order has a follow up by checking if the custom flag field
is checked. The custom flag values are derived from crmd_customer_h table in
CRM.
5) If step 4 is not met populate the preceding Service
Orders in the Result list

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

How to update existing table using Data Load from spreadsheet option?

Hi there,
I need to update an existing table, but in Data Load application when you select csv file to upload it inserts all data by replacing existing one. How can i change this?
Let me know,
Thank you.
A.B.A.

And how do you expect your database server to access a local file in your machine ?
Is the file accessible from outside your machine say inside a webserver folder so that some DB process can poll on the file ?
Or, is your DB server in the same machine where you have the text file ?
You will have to figure out the file acess part before automating user interaction or even auto-refreshing.

Planning data to Oracle Tables Using ERPi???

Hi All,
We are using a Hyperion V11.1.2 having a scenario like
we want ot load data in to Oracle Tables or GL Balance Tables from Planning Application using ERPi , but we are not loading data directly from GL Balance to Planning using ERPi, so can we load data from Planning to OeBS or Oracle Tables using ERPi???
Are there any special adaptars or special way to load data back to OeBS GL Balance ???
Regarda
Kumar

Hi ram
let me know how can i upload oracle tables to XML
regards
Anand

Updating Oracle table with info from Sybase query

I hope this is the correct forum for this question.
I am fairly new to Java and JDBC. I am trying to figure out what the best method for updating information in Oracle tables with data from a Sybase table. I would prefer to use Oracle’s transparent gateway but this is not an option my company will pay for so I am creating a java stored procedure and using JDBC to connect to the Sybase database.
The process I think I need to go thru is
1.     Query an Oracle table to get the records that need to be updated and the “key” information to query the Sybase table with.
2.     Use that result to query the Sybase database to get the fields that need to be updated in the Oracle table for those records.
3.     Update the records on the Oracle table with the data from the Sybase query.
I know I can just do this procedurally, row-by-row, but I was wondering if anyone knows of a way to accomplish this with SQL and no loops. Is there a way to make a result set available as a “SQL table” for another JDBC query?
Basically what I would like to do is:
OraQuery = “ select sybinfo from sometable where updated_date = null”;
Statement orastmt1 = OraConn.createStatement();
ResultSet Orars1 = orastmt1.executeQuery (OraQuery);
SybQuery = “select update_date, sybinfo from sybtable where sybinfo = Orars1.sybinfo”;
Statement sybstmt = SybConn.createStatement();
ResultSet Sybrs = sybstmt1.executeQuery (SybQuery);
OraUpdate = “update (select update_date from sometable, Sybrs where sometable.sybinfo = Sybrs.sybinfo) set update_date = Sybrs.update_date”;
Statement orastmt2 = OraConn.createStatement();
ResultSet Orars2 = orastmt2.executeQuery (OraUpdate);
This may not be possible but if anyone has done something similar and wouldn’t mind sharing I would appreciate it. If there is a “better” way of accomplishing this I am open to suggestions.
Thanks

you can try using cachedRowSet() for the Oracle side query.
The rows in this could be populated using the sybase side query's resultset and then all of this could updated into Oracle in one shot.

ODP OracleCommandBuilder. Updating a table including DATE columns.

Hi
I have a problem with the OracleCommandBuilder not creating the correct update commands when I have DATE type columns in the table.
I have created a test table (called DATETEST) with three columns:
STRINGCOLUMN     VARCHAR2 10
DATECOLUMN DATE
NUMBERCOLUMN     NUMBER
The STRINGCOLUMN is the primary key.
Then I created a typed dataset that looks like this:
STRINGCOLUMN     string
DATECOLUMN string
NUMBERCOLUMN     long
This is the XML schema for the typed dataset:
<?xml version="1.0" encoding="utf-8" ?>
<xs:schema id="DateDS" targetNamespace="http://tempuri.org/DateDS.xsd" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns="http://tempuri.org/DateDS.xsd" xmlns:mstns="http://tempuri.org/DateDS.xsd" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
     <xs:element name="DateDS" msdata:IsDataSet="true">
          <xs:complexType>
               <xs:choice maxOccurs="unbounded">
                    <xs:element name="DATETEST">
                         <xs:complexType>
                              <xs:sequence>
                                   <xs:element name="DATECOLUMN" type="xs:string" minOccurs="0" />
                                   <xs:element name="STRINGCOLUMN" type="xs:string" minOccurs="0" />
                                   <xs:element name="NUMBERCOLUMN" type="xs:long" minOccurs="0" />
                              </xs:sequence>
                         </xs:complexType>
                    </xs:element>
               </xs:choice>
          </xs:complexType>
     </xs:element>
</xs:schema>
And this is the test code:
Dim connection As Oracle.DataAccess.Client.OracleConnection
Dim adapter As New Oracle.DataAccess.Client.OracleDataAdapter()
Dim dbCommand As New Oracle.DataAccess.Client.OracleCommand()
Dim sqlstring As String
Dim data As New DateDS() 'Typed dataset
Const ConnectionString As String = "User Id=............."
Try
'Connect to database
connection = New OracleConnection(ConnectionString)
connection.Open()
'Get data from table DATETEST
dbCommand.CommandText = "SELECT STRINGCOLUMN, TO_CHAR(DATECOLUMN) AS DATECOLUMN, NUMBERCOLUMN FROM DATETEST"
dbCommand.Connection = connection
adapter.SelectCommand = dbCommand
adapter.Fill(data, "DATETEST")
'Make changes to dataset
data.DATETEST(0).DATECOLUMN = Now()
data.DATETEST(0).NUMBERCOLUMN = data.DATETEST(0).NUMBERCOLUMN + 1
'Update database
sqlstring = "SELECT * FROM DATETEST"
adapter.SelectCommand = New OracleCommand(sqlstring, connection)
Dim custCB As New Oracle.DataAccess.Client.OracleCommandBuilder()
custCB.DataAdapter = adapter
adapter.Update(data, "DATETEST")
'Disconnect
connection.Close()
connection.Dispose()
Catch exc As Exception
MessageBox.Show(exc.Message)
End Try
Getting the data from the database is not a problem.
The dataset contains the correct information.
But updating the database is impossible.
I get errors like:
ORA-01861: literal does not match format string
And if I don't specify a DATE format in the TO_CHAR statement I get this error:
Concurrency violation: the UpdateCommand affected 0 records.
I think I've tried everything.
I've used the OracleGlobalization class, with the SetSessionInfo method.
I've tried all different types of date conversions to make sure that
the date format on the database is the same as in the dataset.
I've tried to change the NLS parameters on the DB server and in the registry on the client.
I've tried to change the DATECOLUMN type in the typed dataset from string to Oracle.DataAccess.Types.OracleDate
But it still doesn't work.
The default date format on the DB 9i server is AMERICAN,(DD-MON-RR).
A strange thing is that when I instead of using the ODP classes use
the System.Data.OracleClient and its OracleCommandBuilder
the code works perfectly without any errors.
This is the test code that works:
Dim connection As System.Data.OracleClient.OracleConnection
Dim adapter As New System.Data.OracleClient.OracleDataAdapter()
Dim dbCommand As New System.Data.OracleClient.OracleCommand()
Dim data As New DateDS()
Dim sqlstring As String
Const ConnectionString As String = "User Id=......."
Try
'Connect to database
connection = New System.Data.OracleClient.OracleConnection(ConnectionString)
connection.Open()
'Get data from table DATETEST
dbCommand.CommandText = "SELECT STRINGCOLUMN, TO_CHAR(DATECOLUMN,'YYYY-MM-DD HH24:MI:SS') AS DATECOLUMN, NUMBERCOLUMN FROM DATETEST"
dbCommand.Connection = connection
adapter.SelectCommand = dbCommand
adapter.Fill(data, "DATETEST")
'Make changes to dataset
data.DATETEST(0).DATECOLUMN = Now()
data.DATETEST(0).NUMBERCOLUMN = data.DATETEST(0).NUMBERCOLUMN + 1
'Update database
sqlstring = "SELECT * FROM DATETEST"
adapter.SelectCommand = New System.Data.OracleClient.OracleCommand(sqlstring, connection)
Dim custCB As New System.Data.OracleClient.OracleCommandBuilder()
custCB.DataAdapter = adapter
adapter.Update(data, "DATETEST")
'Disconnect
connection.Close()
connection.Dispose()
Catch exc As Exception
MessageBox.Show(exc.Message)
End Try
My experience until this came up is that the ODP provider is better on everything
than the microsoft Oracle provider so I don't want to switch unless I have to.
Could someone that have used the ODP OracleCommandBuilder for updating a table including DATE columns with a typed dataset please give me some tips on how to make this work?
I would be the happiest man on earth if someone had a solution :-)
Erik

Don't convert the dates to strings. Ever.
The command builder uses the metadata returned from the select command to build the insert/update commands. Using to_char in the query tells ODP that that is a varchar2 column. If you omit the to_char the commandBuilder will know to bind a date parameter in that spot.
Also in your typed dataset you should change the type from a string to a date.
David

Code to update a table using sqlldr

Hi all,
can anybody give the code to update a table using sqlldr with an example
thank you

You want add the new line and modified the existing line (based on empno) from file e:\scripts\sql\emp2_ext.dat into table emp2 :
7782,CLARK,MANAGER,7839,09/06/81,80000,,10
8000,ORACLE,DATABASE,,11/02/07,99999,,20Then :
SQL> conn system/mypwd
Connected.
SQL>
SQL> create directory my_dir as 'e:\scripts\sql';
Directory created.
SQL>
SQL> grant read,write on directory my_dir to scott;
Grant succeeded.
SQL>
SQL> conn scott/mypwd
Connected.
SQL> create table emp2_ext
2 (EMPNO    NUMBER(4),
3   ENAME    VARCHAR2(10),
4   JOB      VARCHAR2(9),
5   MGR      NUMBER(4),
6   HIREDATE DATE,
7   SAL      NUMBER(7,2),
8   COMM     NUMBER(7,2),
9   DEPTNO   NUMBER(2)
10 )
11 ORGANIZATION EXTERNAL
12 ( TYPE ORACLE_LOADER
13    DEFAULT DIRECTORY my_dir
14    ACCESS PARAMETERS
15    ( records delimited by newline
16      badfile my_dir:'emp2_ext.bad'
17      logfile my_dir:'emp2_ext.log'
18      fields terminated by ','
19      missing field values are null
20      ( empno, ename, job, mgr, hiredate char date_format date mask "dd/mm/yy",
21        sal, comm, deptno
22      )
23    ) LOCATION ('emp2_ext.dat')
24 ) ;
Table created.
SQL>
SQL> select * from emp2_ext;
     EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
      7782 CLARK      MANAGER         7839 09/06/81      80000                    10
      8000 ORACLE     DATABASE             11/02/07      99999                    20
SQL> select * from emp2;
     EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
      7782 CLARK      MANAGER         7839 09/06/81      24500                    10
      7839 KING       PRESIDENT            17/11/81      50000                    10
      7934 MILLER     CLERK           7782 23/01/82      13000                    10
SQL> merge into emp2 a
2 using (select * from emp2_ext) b
3 on    (a.empno=b.empno)
4 when matched then update set a.ename=b.ename,
5                               a.job=b.job,
6                               a.mgr=b.mgr,
7                               a.hiredate=b.hiredate,
8                               a.sal=b.sal,
9                               a.comm=b.comm,
10                               a.deptno=b.deptno
11 when not matched then insert (a.empno, a.ename, a.job, a.mgr, a.hiredate, a.sal, a.comm, a.deptno)
12                        values (b.empno, b.ename, b.job, b.mgr, b.hiredate, b.sal, b.comm, b.deptno);
2 rows merged.
SQL>
SQL> select * from emp2;
     EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
      7782 CLARK      MANAGER         7839 09/06/81      80000                    10 --modified line
      7839 KING       PRESIDENT            17/11/81      50000                    10
      7934 MILLER     CLERK           7782 23/01/82      13000                    10
      8000 ORACLE     DATABASE             11/02/07      99999                    20 --added line
SQL> HTH,
Nicolas.
Well, Hans has already give good explanation with docs links...
Message was edited by:
N. Gasparotto

Updateing oracle table Emp usering JDBC Adapter

Hi,
IS any one can help me what is the Format of JDBC Driver and Connection type.When we update a oracle table useing JDBC Adpater.
Thanks in advance
Regd's
Raj

Hi Raj,
To access any Database from XI, you will have to install the corresponding Driver on your XI server.
To install oracle driver, just check this link,
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
The details that have to be entered while adapter configuration if you are using the OJDBC14.jar
The parameters should be mentioned as follows.
Connection : <b>jdbc:oracle:thin:@<IP adress>:<listener port>:<instance name (database name)></b>
Driver : <b>oracle.jdbc.driver.OracleDriver</b>
Also go through these links for more information regarding the same:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/4f34c587f05048adee640f4c346417/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm
Regards,
Abhy

Updating EKKO table using E1BPPAREX

Hi all,
My requirement is to update ekko table using E1BPPAREX segement. I have gone through so many posts regarding this.
In my case, PO number is not yet created. I am using BAPI_PO_CREATE1 for creating this . From PI side, if they pass the custom field value in the appropriate postion of VALUEPART field of E1BPPAREX, will it get updated to the ekko table automatically.
Regards,
Sajith

Hi Sajith,
you have to do is populate structure extensionin. You'll have to implement the fm DDIF_NAMETAB_GET to look for the right place (offset) in order to add the field on the structure extension in.
Example:
CALL FUNCTION 'DDIF_NAMETAB_GET'
    EXPORTING
      tabname   = c_ext_table   --> ''BAPI_TE_MEPOHEADER
    TABLES
      dfies_tab = lt_tab
    EXCEPTIONS
      not_found = 1
      OTHERS    = 2.
CLEAR l_offset.
LOOP AT lt_tab.
    CASE lt_tab-fieldname.
      WHEN c_yourfield.
        w_extin-valuepart1+l_offset = p_yourfield.
    ENDCASE.
    ADD lt_tab-leng TO l_offset.
ENDLOOP.
MOVE c_ext_table TO w_extin-structure.
APPEND w_extin TO p_i_extin.
Regards,
Carlos.

Help Required :Excel Upload Into Oracle Table Using PLSQL Procedure/Package

Please Help , Urgent Help Needed.
Requirement is to Upload Excel file Into Oracle Table Using PLSQL Procedure/Package.
Case's are :
1. Excel File is On Users/ Client PC.
2. Application is on Remote Server(Oracle Forms D2k).
3. User Is Using Application Using Terminal Server LogIn.
4. So If User Will Use to GET_FILE_NAME() function of D2K to Get Excel File , D2k Will Try to pick File from That Remote Server(Bcs User Logind from Terminal Server Option).
5. Cannot Use Util_File Package Or Oracle Directory to Place That File on Server.
6. we are Using Oracle 8.7
So Need Some PL/SQL Package or Fuction/ Procedure to Upload Excel file on User's Pc to Oracle Table.
Please Guide me wd some Code. or with Some Pl/SQL Package, or With SOme Hint. Or any Link ....
Jus help to Sort This Issue ........
you can also write me on :
[email protected], [email protected]

I also Tried to Use This
But How can i Use SQLLDR Command In Stored Procedure.
Well IN SQL*PlUS it is successfull but in Stored Procedure /Package ,PL/SQL does not recognise the OS commands.
So now my Question How can I recognise the SQLLDR Commnad in Stored Procedure.

Help Required:How Upload Excel file Into Oracle Table Using PLSQL Procedure

Please Help , Urgent Help Needed.
Requirement is to Upload Excel file Into Oracle Table Using PLSQL Procedure/Package.
Case's are :
1. Excel File is On Users/ Client PC.
2. Application is on Remote Server(Oracle Forms D2k).
3. User Is Using Application Using Terminal Server LogIn.
4. So If User Will Use to GET_FILE_NAME() function of D2K to Get Excel File , D2k Will Try to pick File from That Remote Server(Bcs User Logind from Terminal Server Option).
5. Cannot Use Util_File Package Or Oracle Directory to Place That File on Server.
6. we are Using Oracle 8.7
So Need Some PL/SQL Package or Fuction/ Procedure to Upload Excel file on User's Pc to Oracle Table.
Please Guide me wd some Code. or with Some Pl/SQL Package, or With SOme Hint. Or any Link ....
Jus help to Sort This Issue ........
you can also write me on :
[email protected], [email protected]

TEXT_IO is a PL/SQL package available only in Forms (you'll want to post in the Forms forum for more information). It is not available in a stored procedure in the database (where the equivalent package is UTL_FILE).
If the Terminal Server machine and the database machine do not have access to the file system on the client machine, no application running on either machine will have access to the file. Barring exceptional setups (like the FTP server on the client machine), your applications are not going to have more access to the client machine than the operating system does.
If you map the client drives from the Terminal Server box, there is the potential for your Forms application to access those files. If you want the files to be accessible to a stored procedure in the database, you'll need to move the files somewhere the database can access them.
Justin

Updating multiple tables using JDBC Adapter

Hi,
I am trying to insert/update multiple tables using one message via JDBC adapter. The following is the message being posted. However, only the first statement was executed. Anything wrong?
Thanks in advance!
Hart
<?xml version="1.0" encoding="UTF-8"?>
<ns0:DeliveryDBUpdate xmlns:ns0="http://test.com/r3_integration"><DeliveryData><DelHeader action="UPDATE_INSERT"><table>DelHeader</table><access><DelNo>0080000230</DelNo><DelType>LF</DelType><XOverwrite>X</XOverwrite><ShipTo>0000000026</ShipTo><SoldTo>0000000026</SoldTo><Priority>00</Priority><DocDate>02/17/2007</DocDate><GText>CIF Test</GText><DelDate>02/20/2007</DelDate><PickDate>02/20/2007</PickDate><ShipPoint>NO02</ShipPoint><PackCount>00000</PackCount></access><key><DelNo>0080000230</DelNo></key></DelHeader>
<DelItem action="INSERT"><table>DelItem</table><access><DelNo>0080000230</DelNo><ItemNo>000010</ItemNo><GText>10# GRAN-GREAT VALUE</GText><Material>G04410G611</Material><Plant>6005</Plant><SLoc>6005</SLoc><RefDoc>mmenon32</RefDoc><RefItem>00000000</RefItem><DelQty>5.000</DelQty><UOM>BL</UOM></access><access><DelNo>0080000230</DelNo><ItemNo>000020</ItemNo><GText>25# GRAN- GREAT VALUE</GText><Material>G04025G611</Material><Plant>6005</Plant><SLoc>6005</SLoc><RefDoc>mmenon32</RefDoc><RefItem>00000000</RefItem><DelQty>5.000</DelQty><UOM>BG</UOM></access></DelItem></DeliveryData></ns0:DeliveryDBUpdate>

Hi,
You need 2 STATEMENT level tags,
<?xml version="1.0" encoding="UTF-8"?>
<ns0:DeliveryDBUpdate xmlns:ns0="http://test.com/r3_integration">
<b><DeliveryData1></b>
<DelHeader action="UPDATE_INSERT">
<table>DelHeader</table>
<access>
<DelNo>0080000230</DelNo>
<DelType>LF</DelType>
<XOverwrite>X</XOverwrite>
<ShipTo>0000000026</ShipTo>
<SoldTo>0000000026</SoldTo>
<Priority>00</Priority>
<DocDate>02/17/2007</DocDate>
<GText>CIF est</GText>
<DelDate>02/20/2007</DelDate>
<PickDate>02/20/2007</PickDate>
<ShipPoint>NO02</ShipPoint>
<PackCount>00000</PackCount>
</access>
<key>
<DelNo>0080000230</DelNo>
</key>
</DelHeader>
<b><DeliveryData1></b>
<b><DeliveryData2></b>
<DelItem action="INSERT">
<table>DelItem</table>
<access>
<DelNo>0080000230</DelNo>
<ItemNo>000010</ItemNo>
<GText>10# GRAN-GREAT VALUE</GText>
<Material>G04410G611</Material>
<Plant>6005</Plant>
<SLoc>6005</SLoc>
<RefDoc>mmenon32</RefDoc>
<RefItem>00000000</RefItem>
<DelQty>5.000</DelQty>
<UOM>BL</UOM>
</access>
<access>
<DelNo>0080000230</DelNo>
<ItemNo>000020</ItemNo>
<GText>25# GRAN- GREAT VALUE</GText>
<Material>G04025G611</Material>
<Plant>6005</Plant>
<SLoc>6005</SLoc>
<RefDoc>mmenon32</RefDoc>
<RefItem>00000000</RefItem>
<DelQty>5.000</DelQty>
<UOM>BG</UOM>
</access>
</DelItem>
<b></DeliveryData2></b>
</ns0:DeliveryDBUpdate>
Try with such a strcuture and let us know if it works.
Regards
Bhavesh

Update a table using MODIFY

Hi,
We need your help.
We want to update a table using the MODIFY command but it does not delete the previous entries instead it INSERTs a new entry.
Scenario:
1. Upon calling the Screen for Editing the entry, the previous entry must be deleted
2. When SAVEd, the new entry must replace the previous entry.

Make sure that in the definition or your table you have specified the key. Otherwise, the system may "think" that all the fields are part of the key, therefore all lines are different.
This is a extract from SAP's documentation:
"The line to be changed is determined by the fact that the content of the table key matches the content of the corresponding components in the wa work area. For tables with a key that is not unique, the first entry that is found is changed. "
Regards.

J2ME app.: To update Oracle table by sending data through mobile phone

Hello all,
I want to develop a mobile app to update the table of oracle database by sending the data through the SMS (Short Message Service). Means I'll send a sms through my cellphone containing some data and this data will be used to update the remote oracle database. How to do that?. Plz help.
Thanx in advance.

hi
My problem is here I need to update the loginfo table with the file name, count of records, table name and datetime.
For instance my dat file is XX.dat
my database table name is Mytable
Total record count is 10,00,000 records
datetime as on this date
the data in the XX.dat file I am using the controlfile (SQL*loader and dumping into the Mytable.Now my 10,00,000 records are dumped into the Mytable.
This process information I want to store it in the loginfo table. For this I need the trigger
CREATE OR REPLACE TRIGGER MYTRIGG
AFTER INSERT ON MYTABLE
Declare
V_Count Number;
Begin
Select count(*) into V_Count from Mytable;
Insert into Loginfo(TotalRecords,Date)
Values(V_Count,Sysdate);
end;
This is the trigger I have used.But in my loginfo table instead of one value as 10,00,000 it is getting each record as row by row
1
4
100
1000
10,00,000
So I need only one value to be stored and at the same time my tablename and filename must also be stored.
Kindly help me
suroop

Update oracle table using data through ODBC

Similar Messages

Maybe you are looking for