Oracle VM 3.1.1 with IBM Bladecenter S

Hi,
I need some help for configuration OVM 3.1.1 on Bladecenter S, because the enviroment use SAS connection and when mapped luns to bladeserver, multipath list appear the devices but Oracle VM Manager not appear physical disks. I verified on OVM Server this result:
======================================================
[root@tstvm ~]# fdisk -l
Disk /dev/sda: 16.1 GB, 16106127360 bytes
255 heads, 63 sectors/track, 1958 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sda doesn't contain a valid partition table
Disk /dev/sdc: 145.9 GB, 145999527936 bytes
255 heads, 63 sectors/track, 17750 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 13 104391 83 Linux
/dev/sdc2 14 17619 141420195 83 Linux
/dev/sdc3 17620 17750 1052257+ 82 Linux swap / Solaris
Disk /dev/sdb: 16.1 GB, 16106127360 bytes
255 heads, 63 sectors/track, 1958 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[root@tstvm ~]# multipath -ll
36005076b0756f0ff4fad854600000029 dm-0 IBM,1820N00
size=15G features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 0:0:2:1 sda 8:0 active ready running
`-+- policy='round-robin 0' prio=1 status=enabled
`- 0:0:3:1 sdb 8:16 active ready running
======================================================
How can I solve this problem?
Thanks

try running this on each server:
/usr/bin/rescan-scsi-bus.sh

Similar Messages

Integration with IBM TAM and OIM

Hi all,
We are making proposal to a customer for OIM.
One of their requirements are logging in OIM through their current SSO(ibm TAM).
Is it possible with product function?
Or do we have to develop something?
Can anyone share insight on this?
Thanks in advance.
dongsu
[email protected]

FYI,
Enabling Oracle Identity Manager to Work With IBM Tivoli Access Manager
Configuring SSO Providers for Oracle Identity Manager - 11g Release 2 (11.1.2)

Oracle 11.2.0.2g driver with IBM JRE(J2RE 1.5.0 IBM J9 2.3 Linux x86-32)

Hi All,
I am trying to use oracle 11.2 jdbc thin driver with IBM JRE and getting following exception messages.
Details from Ojdbc5.jar
Implementation-Version: 11.2.0.2.0
Repository-Id: JAVAVM_11.2.0.2.0_LINUX_100812.1
And Details from Java System Properties
java.vm.info: J2RE 1.5.0 IBM J9 2.3 Linux x86-32 j9vmxi3223-20060504 (JIT enabled)
J9VM - 20060501_06428_lHdSMR
JIT - 20060428_1800_r8
GC - 20060501_AA
java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:195)
at javax.crypto.Cipher.getInstance(Unknown Source)
at oracle.security.o5logon.O5LoginClientHelper.decryptAES(Unknown Source)
at oracle.security.o5logon.O5LoginClientHelper.generateOAuthResponse(Unknown Source)
at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:655)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:366)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:294)
at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1247)
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1221)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111)
at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77)
at com.tes.archival.extractor.DataExtractorWithJdbcImpl.extractArchivalRecords(DataExtractorWithJdbcImpl.java:61)
at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:57)
at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:1)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:284)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Thread.java:797)
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>(Unknown Source)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:177)
... 24 more
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.access$600(Unknown Source)
at javax.crypto.b$0.run(Unknown Source)
at java.security.AccessController.doPrivileged(AccessController.java:241)
... 27 more
Any help in resolving this issue will be much appreaciated.
Regards,
Raman

804915 wrote:
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!Probably a permissions problem. Or something is wrong with the certs.

Installing oracle 11.2 rac with IBM Storwize V7000 san with aix 6.1

Has and one deployed 11g rac with IBM Storwize V7000 san with aix 6.1
Is this possible using Oracle CRS without going for OS cluster like GPFS

Hi lbn76,
Has and one deployed 11g rac with IBM Storwize V7000 san with aix 6.1
Is this possible using Oracle CRS without going for OS cluster like GPFS
I hope same thing will work with AIX 6.1 alsoNo problem, the procedure of installation of clusterware is the same in any AIX Platform.
If you are using Clusterware 11.2 you can (should) use ASM Diskgroup to place your clusterware files and database files. If you want use Cluster Filesystem to any other purpose you can use ACFS feature of ASM.
The Storage will be transparent to the ASM, the Luns will be mapped to AIX and ASM (Oracle) will manage the read and write.
The Storage Storwize have several great features, but are transparent to the ASM. The ASM will only see the LUNs provided by AIX.
Regards,
Levi Pereira

Oracle RDBMS with IBM HACMP

Hi!
How installing Oracle RDBMS with IBM High Availability Cluster
Multi-Processing (IBM HACMP)? I cannot find the documentation.
OS: IBM AIX 5L.
Oracle: RDBMS Server 10g (10.2 for AIX).
I wish to find the documentation on the given question.
HELP!

This might help...
http://publib.boulder.ibm.com/infocenter/tivihelp/v1r1/index.jsp?topic=/com.ibm.itsmfh.doc/afco000054.htm
http://www.google.com/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=YFB&q=installation+of+oracle+on+IBM+HACMP&btnG=Search

How does Oracle Database compare with IBM DB2?

Hi
thank you for reading my post
How Does ORACLE Database compare with IBM DB2 ?
Which one has better performance with similar workload?
Which one perform better on System Z hardware and z/OS?
Is there any document that compare these two product?
Thanks.

Hi
The below link may useful to you.
http://www.oracle.com/technology/deploy/availability/pdf/CWP_HA_Oracle10gR2_DB28.2.pdf
With best regards
Shan

Oracle E-Business Suite R12 with HACMP

Hello,
I'm planning to make a dtsirbuted installation of Oracle E-Business Suite R12 like the flollowing configuration :
- Node 1: Web and Forms
- Node 2 : Concurrent Processing.
The two nodes NODE1 and NODE2 are going to be in cluster HACMP, if Node1 goes down for example the Web & Forms Services Will be started on Node 2 and vice versa.
- Node 3 : DB physically clustered with an other Machine Node4(empty).
I need to know is this a possible architecture in a technical point of view especially for the application? and what are the configurations to perform?
BR.

415e7a1a-187e-4d86-a79e-6e29a93468a4 wrote:
Hey Kamal,
Were you able to find a solution to this problem?
I am having same issue with setting up Ebusiness in HACMP. Concurrent Manager doesnt seem to work with virtual node name (service node name/ server IP).
I have logged a call with IBM Support, so far no progress.
Appreciate if you can share your experience.
Please see:
https://forums.oracle.com/message/11234821
https://forums.oracle.com/thread/852323
https://forums.oracle.com/message/3952951
Thanks,
Hussein

EM integration with IBM Tivoli TEC?

Hi. Has anyone integrated EM 9/10 with IBM's Tivoli TEC enterprise alerting/monitoring/ticketing system? We use EM for our Oracle monitoring, etc, but need to pass our alerts to our corporate call centre with uses Tivoli to manage the rest of the enterprise.
I assume we need to exploit the snmp messaging in some way, but if anyone has any experience of this and/or could point me in the direction of any documentation/case studied I'd be very grateful...
Thanks for you time,
Adrian.

I created a trigger on the table where the events enter OMS (SMP_VDE_EVENT_TARGET_DETAILS) and let that trigger call a procedure i created in c that puts the alert in the syslog.
Then we have the tec logfileadapter report that back.
In 10g it should be much simpler. You can create a shellscript that will run when the event triggers; In the shell you have a number of env vars, which you can use.

SCOM 2012 SP1/R2 Monitoring of IBM Bladecenter doesn´t work

We tried the IBM Hardware Management Pack 4.0 and 4.5 and configured everything according to the guide. The Bladecenter is discovered correctly but we dont get any health data or Module Information. It´s almost the same as in this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/ceda483b-9500-4831-869c-4b3d0f178924/cant-get-scom-2012-sp1-to-monitor-ibm-bladecenter?forum=operationsmanagerdeployment
But this problem was resolved through rediscovering the Bladecenter with SNMP v1 or v2 instead of v3 which we did right from the start. We had this Problem with SCOM 2012 SP1 and IBM HMP 4.0/4.5. Since then we upgraded to SCOM 2012 R2 and IBM HMP 4.5 and
ist still the same issue. Everything else works fine like the Hardware Management Packs for various IBM Storage etc...
Thank you.

Hi,
Do you mean the issue is gone after you rediscover the blade center with SNMP v1 and v2? If so, I will record this.
Juke Chou
TechNet Community Support

IBM BladeCenter - Qlogic HBAs

Hi,
We have an IBM Bladecenter with HS21 servers. It also has Qlogic switch module and HBAs. I have Solaris 8/07 installed on two of the blades. The management module of the bladecenter shows the HBAs as expansion card with FRU number 26R0893.
Are there drivers for these?
thanks.
~doug

From what I have found, looks like Solaris 10 (8/07) contains the drivers for these HBAs. Seems like the one server I was working on is not seeing them, as they may not be seated in the slots correctly. The other server, Im able to see the HBAs through various commands. fc-info, etc.
~doug

Cisco Phone Control and Presence 8.6.1.1185 with IBM Lotus Notes 8.5.2 (Integrated Sametime Client 8.0.2) - No presence status visible

Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
     - Servers -> IP address of CUCM
     - Read Only -> unchecked
     - Use as Default CUCM -> checked
     - Synchronize Credentials -> checked
          - Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
     - Use Sametime Credentials -> checked
- Sametime User ID Mapping
     - Use Business Card Attribute -> MailAddress
     - Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
Igor

Hi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
     - Enable Phone Status -> active
     - Desk Phone Control -> active
     - no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
     - Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
     - LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor

Oracle IAS 10 install questions with ebs 11.5.10.2

We have a 11.5.10.2 installation that was installed a few years back
Our environment is
our small server hosts the forms server and the web server
our big server hosts admin node, concurrent manager and database
both of our above servers have IAS_ORACLE_HOME version 4
we have to upgrade this IAS_ORACLE_HOME to version 10
we are following the documents below
233436.1 Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i [ID 233436.1]
261914.1 Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On [ID 261914.1]
313418.1 Using Oracle Discoverer 10.1.2 with Oracle E-Business Suite Release 11i
a) Do we need to configure IAS_ORACLE_HOME on both the above servers ?
It seems that Apps server 10g requires a separate Oracle Instance to store
the metadata repository as mentioned below
The Oracle Application Server 10g Infrastructure must not be
installed in the Oracle E-Business Suite Release 11i database.
For more details, see Oracle MetaLink Note 251627.1,
"Installing an Oracle Application Server Metadata Repository
with an Oracle E-Business Suite Database."
So in case we need to install IAS_ORACLE_HOME on both servers do we need
to create two instances for the Application Server Metadata Repository
or do we have an option ?
Thanks for helping

Guys ,
Check out the following link
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Check out the section called Business intelligence
if you expand the + sign it shows
Included:
* Oracle Business Intelligence Discoverer
* Oracle HTTP Server
* Oracle Application Server Containers for J2EE (OC4J)
* Oracle Enterprise Manager 10g Application Server Control
* Oracle Application Server Web Cache
* Oracle Application Server Reports Services
Since I have Suse Enterprise Linux 9 and I do not have a server available
which I can use exclusively
I cannot choose the version 11 of BIS since it required SLES 10
Hence I have chosen the linux version of the BIS
the files for linux
as_linux_x86_bi_101202_disk1.cpio
as_linux_x86_bi_101202_disk2.cpio
Read
document 313418.1 section 1.3 and also the NOTE in the next section
The document 313418.1 1.3 NOTE section clearly states that if we need only Discoverer plus and Discoverer Viewer I can install the bi components as I explained above.
Hussein has guided me .....check the messages in this same thread above.
Thanks a lot Hussein
Edited by: r_g_financials_dba on Jul 14, 2010 9:22 AM
Edited by: r_g_financials_dba on Jul 14, 2010 9:26 AM

Why Oracle 8i is not Working with JDK 1.3

Why Oracle 8i is not Working with JDK 1.3 by using JDBC.

try this
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:"somedsn","scott","tiger");
I am using this for Oracle, it is working for me.
Uma
Java Developer
http://www.globalleafs.com

Steps to Upgrade Oracle 9.2 to 11R2 on IBM/AIX 5.3

Hi,
I want the complete steps to Upgrade Oracle 9.2 to 11R2 on IBM/AIX 5.3 Non -RAC environment.
Also, I want the reasons to upgrade? What are the Advantages,Features and Benefits ?
Plz post the complete details here.
Thanks,
Saswat

All of the steps are documented in the Upgrade Guide - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
To upgrade directly (using DBUA or scripts) to 11gR2, you need to be at 9.2.0.8 version.
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#i1007814
HTH
Srini

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM on SAME platform RHEL4.0
Scenario My case:
1) DB size 400G.
2) Minimum downtime.
3) oracle 9i(9.2.0.4) source DB.
4) oracle 10g(10.2.0.3) target DB with ASM.
5) Source DB (HOST A) and target DB (HOST B) Machine.
Thanks
Ashutosh

I think Werner is suggesting you ask your question in the appropriate forum.
Go up 2 levels (to Community Discussion Forum) and look for the Database category. It's not that difficult to find, and you will be discussing the question with people who actually care about that kind of question.
The people who read and interact in this forum do so to discuss Documentation questions. Specifically questions about how to improve the documentaiton.

Oracle VM 3.1.1 with IBM Bladecenter S

Similar Messages

Maybe you are looking for